This driver provides support for clock controller on Loongson-2 SoC,
the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock,
there are five independent PLLs inside, each of which PLL can
provide up to three sets of frequency dependent clock outputs.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230323025229.2971-2-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Loongson-2 boot clock was used to spi and lio peripheral and
this patch was to add boot clock index number.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230323025229.2971-1-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Change the multipliers and divisors to support a higher
frequency accuracy if there is only one output.
Currently only O is changed now we are changing M, D and O.
For multiple output case the earlier behavior is retained.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230327062637.22237-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The range is taken care in the zynqmp_pll_round_rate. Remove the rate range
in the zynqmp_clk_register_pll() to prevent the early truncation of the
frequencies and also allow multiple combinations of child and parent to get
more accurate rates.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230324104958.25099-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1) Remove unnecessary blank lines.
2) Reformat one comment for consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refactor acpi_data_prop_read_single() for decreased indentation
and better structure. No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSPM executes an EXECUTE_OPERATION action to instruct the platform to begin
the injection operation, then executes a GET_COMMAND_STATUS action to
determine the status of the completed operation. The ACPI Specification
documented error codes[1] are:
0 = Success (Linux #define EINJ_STATUS_SUCCESS)
1 = Unknown failure (Linux #define EINJ_STATUS_FAIL)
2 = Invalid Access (Linux #define EINJ_STATUS_INVAL)
The original code report -EBUSY for both "Unknown Failure" and "Invalid
Access" cases. Actually, firmware could do some platform dependent sanity
checks and returns different error codes, e.g. "Invalid Access" to indicate
to the user that the parameters they supplied cannot be used for injection.
To this end, fix to return -EINVAL in the __einj_error_inject() error
handling case instead of always -EBUSY, when explicitly indicated by the
platform in the status of the completed operation.
[1] ACPI Specification 6.5 18.6.1. Error Injection Table
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Confidential Computing Event Log (CCEL) table provides the address
and length of the CCEL records area in UEFI reserved memory.
To allow user space access to these records, expose a sysfs interface
similar to the BERT table.
More details about the CCEL table can be found in the ACPI specification
r6.5 [1], sec 5.2.34.
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#cc-event-log-acpi-table # [1]
Co-developed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The verifier test creates BPF ringbuf maps using hard-coded
4096 as max_entries. Some tests will fail if the page size
of the running kernel is not 4096. Use getpagesize() instead.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230326095341.816023-1-hengqi.chen@gmail.com
This patch prevents races on the print function pointer, allowing the
libbpf_set_print() function to become thread-safe.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230325010845.46000-1-inwardvessel@gmail.com
This commit adds an srcu_lockdep.sh script that checks whether lockdep
correctly classifies SRCU-based, SRCU/mutex-based, and SRCU/rwsem-based
deadlocks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ boqun: Fix "RCUTORTURE" with "$RCUTORTURE" ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Add a test number 3 that creates deadlock cycles involving one RCU
Tasks Trace step and L-1 SRCU steps. Please note that lockdep will not
detect these deadlocks until synchronize_rcu_tasks_trace() is marked
with lockdep's new "sync" annotation, which will probably not happen
until some time after these markings prove their worth on SRCU.
Please note that these tests are available only in kernels built with
CONFIG_TASKS_TRACE_RCU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In order to test the new SRCU-lockdep functionality, this commit adds
an rcutorture.test_srcu_lockdep module parameter that, when non-zero,
selects an SRCU deadlock scenario to execute. This parameter is a
five-digit number formatted as DNNL, where "D" is 1 to force a deadlock
and 0 to avoid doing so; "NN" is the test number, 0 for SRCU-based, 1
for SRCU/mutex-based, and 2 for SRCU/rwsem-based; and "L" is the number
of steps in the deadlock cycle.
Note that rcutorture.test_srcu_lockdep=1 will also force a hard hang.
If a non-zero value of rcutorture.test_srcu_lockdep does not select a
deadlock scenario, a console message is printed and testing continues.
[ paulmck: Apply kernel test robot feedback, add rwsem support. ]
[ paulmck: Apply Dan Carpenter feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Lock scenario print is always a weak spot of lockdep splats. Improvement
can be made if we rework the dependency search and the error printing.
However without touching the graph search, we can improve a little for
the circular deadlock case, since we have the to-be-added lock
dependency, and know whether these two locks are read/write/sync.
In order to know whether a held_lock is sync or not, a bit was
"stolen" from ->references, which reduce our limit for the same lock
class nesting from 2^12 to 2^11, and it should still be good enough.
Besides, since we now have bit in held_lock for sync, we don't need the
"hardirqoffs being 1" trick, and also we can avoid the __lock_release()
if we jump out of __lock_acquire() before the held_lock stored.
With these changes, a deadlock case evolved with read lock and sync gets
a better print-out from:
[...] Possible unsafe locking scenario:
[...]
[...] CPU0 CPU1
[...] ---- ----
[...] lock(srcuA);
[...] lock(srcuB);
[...] lock(srcuA);
[...] lock(srcuB);
to
[...] Possible unsafe locking scenario:
[...]
[...] CPU0 CPU1
[...] ---- ----
[...] rlock(srcuA);
[...] lock(srcuB);
[...] lock(srcuA);
[...] sync(srcuB);
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The stress test in test_ww_mutex_init() uses 4095 locks since
lockdep::reference has 12 bits, and since we are going to reduce it to
11 bits to support lock_sync(), and 2047 is still a reasonable number of
the max nesting level for locks, so adjust the test.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202302011445.9d99dae2-oliver.sang@intel.com
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Although all flavors of RCU readers are annotated correctly with
lockdep as recursive read locks, they do not set the lock_acquire
'check' parameter. This means that RCU read locks are not added to
the lockdep dependency graph, which in turn means that lockdep cannot
detect RCU-based deadlocks. This is not a problem for RCU flavors having
atomic read-side critical sections because context-based annotations can
catch these deadlocks, see for example the RCU_LOCKDEP_WARN() statement
in synchronize_rcu(). But context-based annotations are not helpful
for sleepable RCU, especially given that it is perfectly legal to do
synchronize_srcu(&srcu1) within an srcu_read_lock(&srcu2).
However, we can detect SRCU-based by: (1) Making srcu_read_lock() a
'check'ed recursive read lock and (2) Making synchronize_srcu() a empty
write lock critical section. Even better, with the newly introduced
lock_sync(), we can avoid false positives about irq-unsafe/safe.
This commit therefore makes it so.
Note that NMI-safe SRCU read side critical sections are currently not
annotated, but might be annotated in the future.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ boqun: Add comments for annotation per Waiman's suggestion ]
[ boqun: Fix comment warning reported by Stephen Rothwell ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Currently, functions like synchronize_srcu() do not have lockdep
annotations resembling those of other write-side locking primitives.
Such annotations might look as follows:
lock_acquire();
lock_release();
Such annotations would tell lockdep that synchronize_srcu() acts like
an empty critical section that waits for other (read-side) critical
sections to finish. This would definitely catch some deadlock, but
as pointed out by Paul Mckenney [1], this could also introduce false
positives because of irq-safe/unsafe detection. Of course, there are
tricks could help with this:
might_sleep(); // Existing statement in __synchronize_srcu().
if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
local_irq_disable();
lock_acquire();
lock_release();
local_irq_enable();
}
But it would be better for lockdep to provide a separate annonation for
functions like synchronize_srcu(), so that people won't need to repeat
the ugly tricks above.
Therefore introduce lock_sync(), which is simply an lock+unlock
pair with no irq safe/unsafe deadlock check. This works because the
to-be-annontated functions do not create real critical sections, and
there is therefore no way that irq can create extra dependencies.
[1]: https://lore.kernel.org/lkml/20180412021233.ewncg5jjuzjw3x62@tardis/
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ boqun: Fix typos reported by Davidlohr Bueso and Paul E. Mckenney ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device. As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].
This issue has been amplified by commit d6fb6ee182 ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.
It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.
Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.
Fixes: d6fb6ee182 ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1]
Reported-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Pierre Asselin <pa@panix.com>
The calculation DIFx is BIT(n) +1 is only true for 9FGV0241. With
additional devices this is getting more complicated.
Support a base bit for the DIF calculation, currently only devices
with consecutive bits are supported, e.g. the 6-channel device needs
additional logic.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230310075535.3476580-3-alexander.stein@ew.tq-group.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is a 4-channel variant of 9FGV series.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230310075535.3476580-2-alexander.stein@ew.tq-group.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is in preparation to support additional devices which have different
IDs as well as a slightly different register layout.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230310075535.3476580-1-alexander.stein@ew.tq-group.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add driver for the Skyworks Si521xx PCIe clock generators. Supported models
are Si52144/Si52146/Si52147, tested model is Si52144. It should be possible
to add Si5213x series as well.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230118191521.15544-2-marex@denx.de
[sboyd@kernel.org: Make clk_ops const]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add binding for Skyworks Si521xx PCIe clock generators. This binding
is designed to support Si52144/Si52146/Si52147 series I2C PCIe clock
generators, tested model is Si52144. It should be possible to add
Si5213x series as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230118191521.15544-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On the arm64 platform with PSCI, the core log of CPU offline is as
follows:
[ 100.431501] CPU1: shutdown
[ 100.454820] psci: CPU1 killed (polled 20 ms)
[ 100.459266] CPU2: shutdown
[ 100.482575] psci: CPU2 killed (polled 20 ms)
[ 100.486057] CPU3: shutdown
[ 100.513974] psci: CPU3 killed (polled 28 ms)
[ 100.518068] CPU4: shutdown
[ 100.541481] psci: CPU4 killed (polled 24 ms)
Prevent sleepgraph from mistakenly treating the "CPU up" message as part
of the suspend flow (because it should be regarded as part of the resume
flow) by making it recognize the "CPU* killed" messages above.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
install_latest_from_github.sh:
- Added a new script which allows users to install the latest pm-graph
from the upstream github repo. This is useful if the kernel source
version has issues that have already been fixed in github.
sleepgraph.py:
- Updated all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
- Added ethtool output to the log for the system's ethernet device id the
ethtool exists. This helps in debugging network issues.
- Made the tool more robustly handle events where mangled dmesg or ftrace
outputs do not include all the requisite data. The tool fails gracefully
instead of creating a garbled timeline.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit c46496119e ("clk: loongson1: Remove the outdated driver") removes
all files matching the pattern drivers/*/*/*loongson1*, but misses to
adjust the file entry for MIPS/LOONGSON1 ARCHITECTURE in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Remove this file entry in MIPS/LOONGSON1 ARCHITECTURE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230323121437.28239-1-lukas.bulwahn@gmail.com
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Highlights:
- Intel tpmi/vsec fixes
- think-lmi fixes
- 2 other small fixes / hw-id additions
The following is an automated git shortlog grouped by driver:
platform/surface:
- aggregator: Add missing fwnode_handle_put()
platform/x86 (gigabyte-wmi):
- Add support for A320M-S2H V2
platform/x86/intel:
- tpmi: Revise the comment of intel_vsec_add_aux
- tpmi: Fix double free in tpmi_create_device()
- vsec: Fix a memory leak in intel_vsec_add_aux
think-lmi:
- Add possible_values for ThinkStation
- only display possible_values if available
- use correct possible_values delimiters
- add missing type attribute
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmQhfPAUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x7PQf+NhIvs4KWPUiHMGz2w7xt2bls6agA
ZyQB50UDNDt4JBQG6ZYdMd0d1oFoov8E1869vMccHTPNDKrpju0j8zVULuCJlJ0R
5MmcKKgbq5l3pBPxuTXY9MIHX0zGd8vuG4tcRQIBLttHvj5T4Dbny3+ohGEf9b4o
HlwkUBTWjO0LK6NPa4IWC1lZbmsXncEQYy4CaxtQGUN754EdlGfuBhn3o1MKIgoD
B6HEBH3MSr81UhvYPWGvB6X7qk1vXUW0K+3B375+pLxVSPsjVDOHBQ2BovDC8Enc
KVXPl4vGd6ZpVtU8kEj7kiyhFGrkCXUxQ2IbkuqL9iuiy7AZzi1O4Cwygw==
=i/tZ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel tpmi/vsec fixes
- think-lmi fixes
- two other small fixes / hw-id additions
* tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Add missing fwnode_handle_put()
platform/x86: think-lmi: Add possible_values for ThinkStation
platform/x86: think-lmi: only display possible_values if available
platform/x86: think-lmi: use correct possible_values delimiters
platform/x86: think-lmi: add missing type attribute
platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2
platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux
platform/x86/intel: tpmi: Fix double free in tpmi_create_device()
platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230319163217.226144-1-robh@kernel.org
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The structure sysfs_dev_char_kobj is local only to the driver core code,
so move it out of the global class.h file and into the internal base.h
file as no one else should be touching this symbol.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230327160319.513974-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no users in the property.h for the struct net_device.
Remove the latter for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230327130150.84114-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The header files (fwnode.h and property.h) are part of the device
property API, which in its turn is part of driver core. Add the
missed headers to the corresponding record in the MAINTAINERS database.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230327130150.84114-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit "perf/amlogic: resolve conflict between canvas & pmu"
changed the base address.
Fixes: 2016e2113d ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230327120932.2158389-4-mgonzalez@freebox.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Commit 21b56c8477 ("iov_iter: get rid of separate bvec and xarray
callbacks") removed the calls to memcpy_page_flushcache().
Remove the unnecessary memcpy_page_flushcache() call.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Dan Williams" <dan.j.williams@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20221230-kmap-x86-v1-3-15f1ecccab50@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Compiling AMD GPU drivers displays two warnings:
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency'
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function
parameter 'file_private' description in
'drm_sched_job_add_syncobj_dependency'
Get rid of them by renaming the variable name on the function description
Signed-off-by: Caio Novais <caionovais@usp.br>
Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Add missing earlyclobber annotation to size, to, and tmp2 operands of the
__clear_user() inline assembly since they are modified or written to before
the last usage of all input operands. This can lead to incorrect register
allocation for the inline assembly.
Fixes: 6c2a9e6df6 ("[S390] Use alternative user-copy operations for new hardware.")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK
request fails, instead of silently ignoring it.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Expolines depend on scripts/basic/fixdep. And build of expolines can now
race with the fixdep build:
make[1]: *** Deleting file 'arch/s390/lib/expoline/expoline.o'
/bin/sh: line 1: scripts/basic/fixdep: Permission denied
make[1]: *** [../scripts/Makefile.build:385: arch/s390/lib/expoline/expoline.o] Error 126
make: *** [../arch/s390/Makefile:166: expoline_prepare] Error 2
The dependence was removed in the below Fixes: commit. So reintroduce
the dependence on scripts.
Fixes: a0b0987a78 ("s390/nospec: remove unneeded header includes")
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: stable@vger.kernel.org
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230316112809.7903-1-jirislaby@kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.
Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.
Fixes: 1fde573413 ("s390: vfio-ap: base implementation of VFIO AP device driver")
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If there is no driver match function, the driver core assumes that each
candidate pair (driver, device) matches, see driver_match_device().
Drop the matrix bus's match function that always returned 1 and so
implements the same behaviour as when there is no match function
Signed-off-by: Lizhe <sensor1010@163.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20230319041941.259830-1-sensor1010@163.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390 trivially supports the ARCH_HAS_MEMBARRIER_SYNC_CORE requirements
since the used lpswe(y) instruction to return from any kernel context to
user space performs CPU serialization. This is very similar to arm, arm64
and powerpc.
See commit 70216e18e5 ("membarrier: Provide core serializing command,
*_SYNC_CORE") for further details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This flag is used to process only fully populated sampling buffers
when an sampling event is stopped on a CPU. By default the last sampling
buffer is also scanned for samples even if the sampling block full
indicator is not set in the trailer entry of a sampling buffer page.
This flag can be set via perf_event_attr::config1 field. It was never
used and never documented. It is useless now.
With PERF_CPUM_SF_FULL_BLOCKS:
When a process is scheduled off the CPU, the sampling is stopped and
the samples are copied to the perf ring buffer and marked invalid.
When stopped at the last full sample buffer page (which is
achieved with the PERF_CPUM_SF_FULL_BLOCKS options), the hardware
sampling will resume at the first free sample entry in the current,
partially filled sample buffer.
Without PERF_CPUM_SF_FULL_BLOCKS (default behavior):
The partially filled last sample buffer is scanned and valid samples
are saved to the perf ring buffer. The valid samples are marked invalid.
The sampling is resumed when the process is scheduled on this CPU.
Again the hardware sampling will resume at the first free sample entry in
the current, partially filled sample buffer.
Now the next interrupt handler invocation scans the
full sample block and saves the valid samples to the ring buffer.
It omits the invalid samples at the top of the buffer.
The default behavior is fully sufficient, therefore remove this feature.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Kfence only needs its pool to be mapped as page granularity, if it is
inited early. Previous judgement was a bit over protected. From [1], Mark
suggested to "just map the KFENCE region a page granularity". So I
decouple it from judgement and do page granularity mapping for kfence
pool only. Need to be noticed that late init of kfence pool still requires
page granularity mapping.
Page granularity mapping in theory cost more(2M per 1GB) memory on arm64
platform. Like what I've tested on QEMU(emulated 1GB RAM) with
gki_defconfig, also turning off rodata protection:
Before:
[root@liebao ]# cat /proc/meminfo
MemTotal: 999484 kB
After:
[root@liebao ]# cat /proc/meminfo
MemTotal: 1001480 kB
To implement this, also relocate the kfence pool allocation before the
linear mapping setting up, arm64_kfence_alloc_pool is to allocate phys
addr, __kfence_pool is to be set after linear mapping set up.
LINK: [1] https://lore.kernel.org/linux-arm-kernel/Y+IsdrvDNILA59UN@FVFF77S0Q05N/
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/1679066974-690-1-git-send-email-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The PMU itself is compatible with the one found on M1. We still know
next to nothing about the counters so keep using CPU uarch specific
compatibles/PMU names.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Mark Rutland <mark.rutland@arm.com.
Reviewed-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230214-apple_m2_pmu-v1-2-9c9213ab9b63@jannau.net
Signed-off-by: Will Deacon <will@kernel.org>
