We should not access hardware after we unbind from the bus.
Use drm_dev_enter() / drm_dev_exit() to mark code sections where
hardware is accessed (and not already protected by other locks)
and drm_dev_unplug() to mark device is gone.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-2-stanislaw.gruszka@linux.intel.com
The error handling for platform_get_irq() failing no longer
works after a recent change, clang now points this out with
a warning:
drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~
Fix this by removing the variable and checking the correct
error status.
Fixes: 625d4ffb43 ("gpu: host1x: Rewrite syncpoint interrupt handling")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127221418.2522612-1-arnd@kernel.org
When the PHY library calls phy_error() something bad has happened, and
we halt the PHY state machine. Calling phy_error() from the main state
machine however is not precise enough to know whether the issue is
reading the link status or starting auto-negotiation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the PTP programmable gpios to implement also PTP_PF_EXTTS
function. The pins can be configured to capture both of rising
and falling edge. Once the event is seen, then an interrupt is
generated and the LTC is saved in the registers.
This was tested using:
ts2phc -m -l 7 -s generic -f ts2phc.cfg
Where the configuration was the following:
[global]
ts2phc.pin_index 6
[eth2]
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes typos in net/sched/* files.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit b984d7b56d ("MIPS: sibyte: Remove unused config option
SIBYTE_BCM1x55"), some #if's in the Broadcom SiByte SOC built-in Ethernet
driver can be simplified.
Simplify prepreprocessor conditions after config SIBYTE_BCM1x55 removal.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The issue fixed for bonding in commit c2edacf80e ("bonding / ipv6: no
addrconf for slaves separately from master") also exists in team driver.
However, we can't just disable ipv6 addrconf for team ports, as 'teamd'
will need it when nsns_ping watch is used in the user space.
Instead of preventing ipv6 addrconf, this patch only prevents RS packets
for team ports, as it did in commit b52e1cce31 ("ipv6: Don't send rs
packets to the interface of ARPHRD_TUNNEL").
Note that we do not prevent DAD packets, to avoid the changes getting
intricate / hacky. Also, usually sysctl dad_transmits is set to 1 and
only 1 DAD packet will be sent, and by now no libteam user complains
about DAD packets on team ports, unlike RS packets.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* fixes for bind and probing error handling
* panel-orientation fixes for Lenovo Book X90F
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmQcDHoACgkQaA3BHVML
eiNz6Af+KuvSV55epFCKD0ToHVbhq11S7JFBVu/zEMXRd8sCRkR64YG8LkF7nsR8
5V+dMKsGTOS2qb2Htk/P9gRYDU6KH6Q2UWaiYUzc3z3vbQi8LxludzSOhh7Y8ErN
6c/ge/35AVFJb0ipXAQBOhhMsfD0IYc1H8VYv5YaV9n4E1m99SS8GuQJ/Ua/JQvl
KRIDW/rizMhHKTuxlHR0l2+EjHTSn2ZBQ3DktsrvjmWOvcvKGivwTohhIRqKESeu
HokH8hmRDXef/800Nud+tVZcEROubbsTmXV1hTUAowac58UduPC86b2MCyT3G4P4
XYOJBGS3LaNOOqyihnYeoEu8cSaV0A==
=qFS5
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-03-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* fixes for bind and probing error handling for meson, lt8912b bridge
* panel-orientation fixes for Lenovo Book X90F
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323082401.GA8371@linux-uq9g
It's been reported that the recent kernel can't probe the PCM devices
on Roland VS-100 properly, and it turned out to be a regression by the
recent addition of the bit shift range check for the format bits.
In the old code, we just did bit-shift and it resulted in zero, which
is then corrected to the standard PCM format, while the new code
explicitly returns an error in such a case.
For addressing the regression, relax the check and fallback to the
standard PCM type (with the info output).
Fixes: 43d5ca88df ("ALSA: usb-audio: Fix potential out-of-bounds shift")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084
Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang with W=1 reports
sound/pci/rme9652/hdspm.c:6149:19: error: unused function
'copy_u32_le' [-Werror,-Wunused-function]
static inline int copy_u32_le(void __user *dest, void __iomem *src)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230323202713.2637150-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When reporting errors or skips we currently include the diagnostic message
indicating why we're failing or skipping. This isn't ideal since KTAP
defines the entire print as the test name, so if there's an error then test
systems won't detect the test as being the same one as a passing test. Move
the diagnostic to a separate ksft_print_msg() to avoid this issue, the test
name part will always be the same for passes, fails and skips and the
diagnostic information is still displayed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230323-alsa-pcm-test-names-v1-1-8be67a8885ff@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While it is common for driver bugs with events to apply to all events there
are some issues which only trigger for specific values. Understanding these
is easier if we know what we were trying to do when configuring the control
so add logging for the specific values involved in the spurious event.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230322-alsa-mixer-event-values-v1-1-78189fcf6655@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.
Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Florian Westphal says:
====================
netfilter updates for net-next
This pull request contains changes for the *net-next* tree.
1. Change IPv6 stack to keep conntrack references until ipsec policy
checks are done, like ipv4, from Madhu Koriginja.
This update was missed when IPv6 NAT support was added 10 years ago.
2. get rid of old 'compat' structure layout in nf_nat_redirect
core and move the conversion to the only user that needs the
old layout for abi reasons. From Jeremy Sowden.
3. Compact some common code paths in nft_redir, also from Jeremy.
4. Time to remove the 'default y' knob so iptables 32bit compat interface
isn't compiled in by default anymore, from myself.
5. Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
Also from myself.
* 'main' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: keep conntrack reference until IPsecv6 policy checks are done
xtables: move icmp/icmpv6 logic to xt_tcpudp
netfilter: xtables: disable 32bit compat interface by default
netfilter: nft_masq: deduplicate eval call-backs
netfilter: nft_redir: use `struct nf_nat_range2` throughout and deduplicate eval call-backs
====================
Link: https://lore.kernel.org/r/20230322210802.6743-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One of the most commonly asked questions is "I answered all questions
and don't need to make any code changes, why was the patch not applied".
Document our time honored tradition of asking people to repost with
improved commit messages, to record the answers to reviewer questions.
Take this opportunity to also recommend a change log format.
Link: https://lore.kernel.org/r/20230322231202.265835-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The load_cpu_fw function has no error return code
and always returns zero. Checking the value returned by
this function does not make sense.
Now checking the value of the return value is misleading when reading
the code. Path with error handling was deleted in 57579f7629
("bnx2: Use request_firmware()").
As a result, bnx2_init_cpus() will also return only zero
Therefore, it will be safe to change the type of functions
to void and remove checking to improving readability.
Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Link: https://lore.kernel.org/r/20230322162843.3452-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the IPA device sysfs directory, the "version" file can be read to
find out what IPA version is implemented. The content of this file
is supplied by ipa_version_string(), which needs to be updated to
properly handle IPA v5.0.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230322144742.2203947-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Playing with dpll netlink, I came across following issue:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "pin-idx": 1, "pin-state": 1}'
Traceback (most recent call last):
File "tools/net/ynl/cli.py", line 52, in <module>
main()
File "tools/net/ynl/cli.py", line 40, in main
reply = ynl.do(args.do, attrs)
File "tools/net/ynl/lib/ynl.py", line 520, in do
return self._op(method, vals)
File "tools/net/ynl/lib/ynl.py", line 476, in _op
msg += self._add_attr(op.attr_set.name, name, value)
File "tools/net/ynl/lib/ynl.py", line 344, in _add_attr
raise Exception(f'Unknown type at {space} {name} {value} {attr["type"]}')
Exception: Unknown type at dpll pin-state 1 u8
I'm not that familiar with ynl code, but from a quick peek, I suspect
that couple other types are missing for both encoding and decoding.
Ignoring those here as I'm scratching my local itch only.
Fix the issue by adding u8 attr packing.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230322154242.1739136-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unused group parameter in ext4_block_bitmap_csum_set. After this,
group parameter in ext4_set_bitmap_checksums is also not used, just
remove it too.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230221203027.2359920-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As inode table blocks are contiguous, inode table blocks inside the
block_group can be represented as range [itbl_cluster_start,
itbl_cluster_last]. Then we can simply account inode table cluters and
check cluster overlap with [itbl_cluster_start, itbl_cluster_last]
instead of traverse each block of inode table.
By the way, this patch fixes code style problem of comment for
ext4_num_overhead_clusters.
[ Merged fix-up patch which fixed potentially access to an
uninitialzied stack variable. --TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-8-shikemeng@huaweicloud.com
Link: https://lore.kernel.org/r/202303171446.eLEhZzAu-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For case we initialize a bitmap bh, we will set bitmap bh verified.
We can return immediately instead of goto verify to remove unnecessary
work for trying to verify bitmap bh.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit bdfb6ff4a2 ("ext4: mark group corrupt on group descriptor
checksum") added flag to indicate corruption of group instead of
marking all blocks used. Just remove stale comment.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We only call ext4_bg_num_gdb_nometa if there is no meta_bg feature or group
does not reach first_meta_bg, so group must not reside in meta group. Then
group has a global gdt if superblock exists. Just remove confusing branch
that meta_bg feature exists.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_num_base_meta_clusters is already aware of meta_bg feature and test
if block_group is inside real meta block groups before calling
ext4_bg_num_gdb. Then ext4_bg_num_gdb will check if block group is inside
a real meta block groups again to decide either ext4_bg_num_gdb_meta or
ext4_bg_num_gdb_nometa is needed.
Call ext4_bg_num_gdb_meta or ext4_bg_num_gdb_nometa directly after we
check if block_group is inside a meta block groups in
ext4_num_base_meta_clusters to remove redundant check of meta block
groups in ext4_bg_num_gdb.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
1.Last valid cluster of inode table is EXT4_B2C(sbi, offset +
sbi->s_itb_per_group - 1). We should make sure last valid cluster is <
max_bit, i.e., EXT4_B2C(sbi, offset + sbi->s_itb_per_group - 1) is <
max_bit rather than EXT4_B2C(sbi, offset + sbi->s_itb_per_group) is
< max_bit.
2.Bit search length should be last valid cluster plus 1, i.e.,
EXT4_B2C(sbi, offset + sbi->s_itb_per_group - 1) + 1 rather than
EXT4_B2C(sbi, offset + sbi->s_itb_per_group).
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We mark buffer_head of bitmap successfully initialized even error occurs
in ext4_init_block_bitmap. Although we will return error, we will get a
invalid buffer_head of bitmap from next ext4_read_block_bitmap_nowait
which is marked buffer_verified but not successfully initialized actually
in previous ext4_read_block_bitmap_nowait.
Fix this by only marking buffer_head successfully initialized if
ext4_init_block_bitmap successes.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Test generic/390 in data=journal mode often triggers a warning that
ext4_do_writepages() tries to start a transaction on frozen filesystem.
This happens because although all dirty data is properly written, jbd2
checkpointing code writes data through submit_bh() and as a result only
buffer dirty bits are cleared but page dirty bits stay set. Later when
the filesystem is frozen, writeback code comes, tries to write
supposedly dirty pages and the warning triggers. Fix the problem by
calling sync_filesystem() once more after flushing the whole journal to
clear stray page dirty bits.
[ Applied fixup patches to address crashes when running data=journal
tests; see links for more details -- TYT ]
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230308142528.12384-1-jack@suse.cz
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/20230319183617.GA896@sol.localdomain
Link: https://lore.kernel.org/r/20230323145404.21381-1-jack@suse.cz
Link: https://lore.kernel.org/r/20230323145404.21381-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add basic documentation about NAPI. We can stop linking to the ancient
doc on the LF wiki.
Link: https://lore.kernel.org/all/20230315223044.471002-1-kuba@kernel.org/
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> # for ctucanfd-driver.rst
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230322053848.198452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 002f290627 ("cpuset: use static key better and convert to new API")
has used __cpuset_node_allowed() instead of cpuset_node_allowed() to check
whether we can allocate on a memory node. Now this function isn't used by
anyone, so we can do the follow things to clean up it.
1. remove unused codes
2. rename __cpuset_node_allowed() to cpuset_node_allowed()
3. update comments in mm/page_alloc.c
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently show_all_workqueue is called if freeze fails at the time of
freeze the workqueues, which shows the status of all workqueues and of
all worker pools. In this cases we may only need to dump state of only
workqueues that are freezable and busy.
This patch defines show_freezable_workqueues, which uses
show_one_workqueue, a granular function that shows the state of individual
workqueues, so that dump only the state of freezable workqueues
at that time.
tj: Minor message adjustment.
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # for mediatek,mt6779-keypad.yaml
Link: https://lore.kernel.org/r/20230320234718.2930154-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
