APSS PLL found on the IPQ8074 and IPQ6018 are of type Huayra PLL. But,
IPQ5332 APSS PLL is of type Stromer Plus. To accommodate both these PLLs,
refactor the driver to take the clk_alpha_pll, alpha_pll_config via driver
data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217083308.12017-2-quic_kathirav@quicinc.com
commit 1796f808e4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NL5xNU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.
This patch is analoge to a very similar patch for NL5xRU, just the DMI
string changed.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's logical to check ACPI device for NULL inside
acpi_get_driver_gpio_data() instead of requiring that
in each caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
While trying to set up an SSDT override for a USB-2-I2C chip [0],
I realized that the function acpi_gpiochip_find() was using the parent
of the gpio_chip to do the ACPI matching.
This works fine on my Ice Lake laptop because AFAICT, the DSDT presents
the PCI device INT3455 as the "Device (GPI0)", but is in fact handled
by the pinctrl driver in Linux.
The pinctrl driver then creates a gpio_chip device. This means that the
gc->parent device in that case is the GPI0 device from ACPI and everything
works.
However, in the hid-cp2112 case, the parent is the USB device, and the
gpio_chip is directly under that USB device. Which means that in this case
gc->parent points at the USB device, and so we can not do an ACPI match
towards the GPIO device.
I think it is safe to resolve the ACPI matching through the fwnode
because when we call gpiochip_add_data(), the first thing it does is
setting a proper gc->fwnode: if it is not there, it borrows the fwnode
of the parent.
So in my Ice Lake case, gc->fwnode is the one from the parent, meaning
that the ACPI handle we will get is the one from the GPI0 in the DSDT
(the pincrtl one). And in the hid-cp2112 case, we get the actual
fwnode from the gpiochip we created in the HID device, making it working.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/linux-input/20230227140758.1575-1-kaehndan@gmail.com/T/#m592f18081ef3b95b618694a612ff864420c5aaf3 [0]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The header with legacy struct of_mmio_gpio_chip and accompanying
APIs is called legacy-of-mm-gpiochip.h. Remove repetitive '.h'
at the end.
Fixes: a99cc66807 ("gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
shx3_defconfig:
arch/sh/boards/mach-x3proto/setup.c: In function ‘x3proto_devices_setup’:
arch/sh/boards/mach-x3proto/setup.c:246:62: error: invalid use of undefined type ‘struct gpio_chip’
246 | baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
| ^
Fix this by replacing the include of the legacy <linux/gpio.h> by
<linux/gpio/driver.h>.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/CA+G9fYs7suzGsEDK40G0pzxXyR1o2V4Pn-oy1owTsTWRVEVHog@mail.gmail.com
Fixes: 21d9526d13 ("gpiolib: Make the legacy <linux/gpio.h> consumer-only")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since the split of the legacy of_mm_gpio_chip to a separate
file and a specific build configuration option, the users
must select it when needed. The PowerPC 40x code misses this,
so we have to add the select here.
Fixes: a99cc66807 ("gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The logic in efi_random_alloc() will iterate over the memory map twice,
once to count the number of candidate slots, and another time to locate
the chosen slot after randomization.
If there is insufficient memory to do the allocation, the second loop
will run to completion without actually having located a slot, but we
currently return EFI_SUCCESS in this case, as we fail to initialize
status to the appropriate error value of EFI_OUT_OF_RESOURCES.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Convert the AK5558 ADC audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230322200949.8986-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for writeback of journalled data directly into
ext4_writepages() instead of offloading it to write_cache_pages(). This
actually significantly simplifies the code and reduces code duplication.
For checkpointing of committed data we can use ext4_writepages()
rightaway the same way as writeback of ordered data uses it on
transaction commit. For journalling of dirty mapped pages, we need to
add a special case to mpage_prepare_extent_to_map() to add all page
buffers to the journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-8-tytso@mit.edu
In case mpage_submit_page() returns error, it doesn't really matter
whether we call mpage_page_done() and then return error or whether we
return directly because in that case page cleanup will be done by
mpage_release_unused_pages() instead. Logically, it makes more sense to
leave the cleanup to mpage_release_unused_pages() because we didn't
succeed in writing the page. So move mpage_page_done() calls after the
error handling.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-7-tytso@mit.edu
Move page unlocking during page writeback out of mpage_submit_page()
into the callers. This will allow writeback in data=journal mode to keep
the page locked for a bit longer. Since page unlocking it tightly
connected to increment of mpd->first_page (as that determines cleanup of
locked but unwritten pages), move page unlocking as well as
mpd->first_page handling into a helper function.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-6-tytso@mit.edu
Do not unlock the written page in ext4_bio_write_page(). Instead leave
the page locked and unlock it in the callers. We'll need to keep the
page locked for data=journal writeback for a bit longer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-5-tytso@mit.edu
In data=journal mode, page should be dirtied only when it has buffers
for checkpoint or it is writeably mapped. In the first case, we don't
need to do anything special. In the second case, page was already added
to the journal by ext4_page_mkwrite() and since transaction commit
writeprotects mapped pages again, page should be writeable (and thus
dirtied) only while it is part of the running transaction. So nothing
needs to be done either. The only special case is when someone pins the
page and uses this pin for modifying page data. So recognize this
special case and only then mark the page as having data that needs
adding to the journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-4-tytso@mit.edu
When looking up extent of pages to map in mpage_prepare_extent_to_map()
we count how many pages we still need to find in a copy of
wbc->nr_to_write counter. With more complex page handling for
data=journal mode, it will be easier to use wbc->nr_to_write directly so
that we don't forget to carry over changes back to nr_to_write counter.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-3-tytso@mit.edu
The comment above do_journal_get_write_access() is very stale. Most of
it just does not refer to what the function does today or how jbd2
works. The bit about transaction handling during write(2) is still
correct so just update the function names in that part and move the
comment to a more appropriate place.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-2-tytso@mit.edu
The order in which clocks are stopped matters as some of the clock
like NPL are derived from MCLK.
Without this patch, Dragonboard RB5 DSP would crash with below error:
qcom_q6v5_pas 17300000.remoteproc: fatal error received:
ABT_dal.c:278:ABTimeout: AHB Bus hang is detected,
Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!!
Turn off fsgen first, followed by npl and then finally mclk, which is exactly
the opposite order of enable sequence.
Fixes: 1dc3459009 ("ASoC: codecs: lpass: register mclk after runtime pm")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20230323110125.23790-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The gt_tlb live selftest has the same code coverage as the
igt_cs_tlb subtest of gtt, except it is better at detecting
TLB bugs. Furthermore, while igt_cs_tlb is hitting some
unforeseen issues, these issues are either false positives
due to the test being poorly formatted, or are true
positives that can be more easily diagnosed with smaller
tests. As such, igt_cs_tlb is superceded by and obsoleted
by gt_tlb, meaning it can be removed.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320192117.287374-1-andi.shyti@linux.intel.com
Restore synchronous probing for Arizona regulators as the main MFD
relies on the ordering of the devices probing.
As these regulators are built into the CODEC and typically have no DT
representation the regulator framework is unaware of their existence
until the driver probes. These means the probing of the driver needs to
be synchronous to ensure the regulators are not substitued for the dummy
later when the users request them.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323132047.833737-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore synchronous probing for Arizona regulators because otherwise
the main MFD driver will not find its core supplies.
As these regulators are built into the CODEC and typically have no DT
representation the regulator framework is unaware of their existence
until the driver probes. These means the probing of the driver needs to
be synchronous to ensure the regulators are not substitued for the dummy
later when the users request them.
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230323132047.833737-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The qcom,sdx55-apcs-gcc is followed by another compatible (syscon), thus
the 'if' clause must match by contains.
Fixes: 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322173559.809805-2-krzysztof.kozlowski@linaro.org
SDX55 and SDX65 DTS takes clocks in a bit different order. Adjust
bindings to the DTS.
Fixes: 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322173559.809805-1-krzysztof.kozlowski@linaro.org
This is just to ensure that .usage_power is properly initialized and
doesn't contain random stack data. The other members of struct pwm_state
should get a value assigned in a successful call to .get_state(). So in
the absence of bugs in driver implementations, this is only a safe-guard
and no fix.
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Link: https://lore.kernel.org/r/20230310214004.2619480-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
This fixes a regression that was possible since commit c73a310762
("pwm: Handle .get_state() failures") which stopped to zero-initialize
the state passed to the .get_state() callback. This was reported at
https://forum.odroid.com/viewtopic.php?f=177&t=46360 . While this was an
unintended side effect, the real issue is the driver's callback not
setting the polarity.
There is a complicating fact, that the .apply() callback fakes support
for inversed polarity. This is not (and cannot) be matched by
.get_state(). As fixing this isn't easy, only point it out in a comment
to prevent authors of other drivers from copying that approach.
Fixes: c375bcbaab ("pwm: meson: Read the full hardware state in meson_pwm_get_state()")
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230310191405.2606296-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
Fixes: 6f0841a819 ("pwm: Add support for Azoteq IQS620A PWM generator")
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20230228135508.1798428-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver only both polarities. Complete the implementation of
.get_state() by setting .polarity according to the configured hardware
state.
Fixes: d09f008108 ("pwm: Add PWM driver for HiSilicon BVT SOCs")
Link: https://lore.kernel.org/r/20230228135508.1798428-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")
Fixes: 2d017189e2 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85 ("drm/amd/pm: enable ASPM by default").
The root cause is still not clear for now.
So extend and apply the ASPM quirk from commit e02fe3bc7a
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.
Fixes: 0064b0ce85 ("drm/amd/pm: enable ASPM by default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
The commit c76e483cd9 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sriov needs to enter/exit safe mode in update umd p state
add the cg flag to let it enter or exit while needed
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For engines not supporting soft reset, i.e. VCN, there will be a failed
ib test before mode 1 reset during asic reset. The fences in this case
are never signaled and next time when we try to free the sa_bo, kernel
will hang.
[How]
During pre_asic_reset, driver will clear job fences and afterwards the
fences' refcount will be reduced to 1. For drm_sched_jobs it will be
released in job_free_cb, and for non-sched jobs like ib_test, it's meant
to be released in sa_bo_free but only when the fences are signaled. So
we have to force signal the non_sched bad job's fence during
pre_asic_reset or the clear is not complete.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the driver to immutable irq-chip with a bit of
intuition.
In this case the driver uses .mask_ack() and .unmask()
and since I have a vague idea about the semantics of
.mask_ack() I added .irq_enable() to the existing .irq_disable()
and called into the gpiolib core from those callbacks
instead of mask/unmask.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
The driver is for a hierarchical chip so some extra care
needs to be taken to introduce two new callbacks.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Whereas in most cases we put the gpiochip_[enable|disable]_irq()
calls in the .irq_mask() and .irq_unmask() callbacks, here
we need to put them in the .irq_enable() and .irq_disable()
callbacks, as this driver uses both .irq_mask() and
.irq_mask_ack().
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
In this case I had to figure out a way to get to the
struct gpio_chip that would work even when the irq_chip
is not part of the driver state container. I did this by
just doing what most other GPIO drivers do and pass
the state struct as data to devm_gpiochip_add_data()
and rewrite accordingly.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch introduces and allocates ls1x_gpio_chip struct containing
gpio_chip and reg_base to avoid global gpio_reg_base.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use SPDX-License-Identifier instead of the license text.
The current author name is unofficial, change it to my real name.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence
[how]
resume mes when do gfx post soft reset
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
