Commit graph

1,185,212 commits

Author SHA1 Message Date
Manivannan Sadhasivam
bfe088bde3 arm64: dts: qcom: sdm845: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

On SDM845, the size of the LLCC bank 0 needs to be reduced to 0x4500 as
there are LLCC BWMON registers located after this range.

Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-4-manivannan.sadhasivam@linaro.org
2023-03-15 15:17:21 -07:00
Manivannan Sadhasivam
cca94f1dd6 soc: qcom: llcc: Do not create EDAC platform device on SDM845
The platforms based on SDM845 SoC locks the access to EDAC registers in the
bootloader. So probing the EDAC driver will result in a crash. Hence,
disable the creation of EDAC platform device on all SDM845 devices.

The issue has been observed on Lenovo Yoga C630 and DB845c.

While at it, also sort the members of `struct qcom_llcc_config` to avoid
any holes in-between.

Cc: <stable@vger.kernel.org> # 5.10
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-15-manivannan.sadhasivam@linaro.org
2023-03-15 15:17:08 -07:00
Manivannan Sadhasivam
721d3e91bf qcom: llcc/edac: Support polling mode for ECC handling
Not all Qcom platforms support IRQ mode for ECC handling. For those
platforms, the current EDAC driver will not be probed due to missing ECC
IRQ in devicetree.

So add support for polling mode so that the EDAC driver can be used on all
Qcom platforms supporting LLCC.

The polling delay of 5000ms is chosen based on Qcom downstream/vendor
driver.

Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-14-manivannan.sadhasivam@linaro.org
2023-03-15 15:17:08 -07:00
Manivannan Sadhasivam
ee13b50087 qcom: llcc/edac: Fix the base address used for accessing LLCC banks
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
accessing the (Control and Status Registers) CSRs of each LLCC bank.
This stride only works for some SoCs like SDM845 for which driver
support was initially added.

But the later SoCs use different register stride that vary between the
banks with holes in-between. So it is not possible to use a single register
stride for accessing the CSRs of each bank. By doing so could result in a
crash.

For fixing this issue, let's obtain the base address of each LLCC bank from
devicetree and get rid of the fixed stride. This also means, there is no
need to rely on reg-names property and the base addresses can be obtained
using the index.

First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC
supports more than one bank, then those need to be defined in devicetree
for index from 1..N-1.

Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org
2023-03-15 15:17:08 -07:00
Manivannan Sadhasivam
43aa006e07 dt-bindings: arm: msm: Fix register regions used for LLCC banks
Register regions of the LLCC banks are located at different addresses.
Currently, the binding just lists the LLCC0 base address and tries to
cover all the banks using a single size. This is entirely wrong as there
are other register regions that happen to lie inside the size covered by
the binding such as the memory controller and holes.

So this needs to be fixed by specifying the base address of individual
LLCC banks. This approach will break the existing users of this binding
as the register regions are split and the drivers now cannot use
LLCC0 register region for accessing rest of the banks (which is wrong
anyway).

But considering the fact that the binding was wrong from the day one and
also the device drivers going wrong by the binding, this breakage is
acceptable.

Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-3-manivannan.sadhasivam@linaro.org
2023-03-15 15:17:08 -07:00
Manivannan Sadhasivam
94b1d58f88 dt-bindings: arm: msm: Update the maintainers for LLCC
Both Rishabh and Sai have left Qualcomm, and there is no evidence of them
maintaining with a new identity. So their entry needs to be removed.

Listed Bjorn as the interim maintainer until someone volunteers to maintain
this binding.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-2-manivannan.sadhasivam@linaro.org
2023-03-15 15:17:08 -07:00
Konrad Dybcio
18290c2eec soc: qcom: socinfo: Add IDs for QCM2290/QRB2210
Add the missing IDs for scuba and its QRB variant.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-scuba_socinfo-v2-2-44fa1256aa6d@linaro.org
2023-03-15 15:09:50 -07:00
Konrad Dybcio
f26e18bda9 dt-bindings: arm: qcom,ids: Add IDs for QCM2290/QRB2210
Add the missing IDs for scuba and its QRB variant.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-scuba_socinfo-v2-1-44fa1256aa6d@linaro.org
2023-03-15 15:08:55 -07:00
Christophe Leroy
0aafbdf35c powerpc: Make generic_calibrate_decr() the default
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.

Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-16 08:56:48 +11:00
Christophe Leroy
5a81c02d0c powerpc/85xx: Fix function naming for p1023_rdb platform
p1023_rdb platform is a copy of mpc85xx_rdb platform and some of its
functions have kept mpc85xx_rdb names.

Rename the said functions.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-16 08:56:48 +11:00
Christophe Leroy
f47b17d519 powerpc/gamecube|wii : Use machine_device_initcall()
Instead of checking machine type in the function,
use machine_device_initcall().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-16 08:56:48 +11:00
Christophe Leroy
357f82395c powerpc/47x: Split ppc47x machine in two
This machine matches two compatibles and sets .pci_irq_fixup
on one of them.

Split it into two machines, then the probe function can be dropped.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop references to ppc47x_probe() to fix build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-16 08:56:26 +11:00
Ville Syrjälä
fb4651f9e0 drm/i915: Don't send idle pattern after DP2.0 link training
Bspec calls us to select pattern 2 after link training for
DP 2.0. Let's do that... by doing nothing because we will
be transmitting pattern 2 at the end of the link training
already.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308212627.7601-2-ville.syrjala@linux.intel.com
2023-03-15 23:47:09 +02:00
Ville Syrjälä
8c042949af drm/i915: Don't switch to TPS1 when disabling DP_TP_CTL
AFAICS Bspec has never asked us to switch to TPS1 when *disabling*
DP_TP_CTL. Let's stop doing that in case it confuses something.
We do have to switch before we *enable* DP_TP_CTL, but that
is already being handled correctly.

v2: Do the same for FDI
v3: Rebase

Reviewed-by: Imre Deak <imre.deak@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308212627.7601-1-ville.syrjala@linux.intel.com
2023-03-15 23:47:05 +02:00
Budimir Markovic
fd0815f632 perf: Fix check before add_event_to_groups() in perf_group_detach()
Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.

Fixes: 2e498d0a74 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo
2023-03-15 21:49:47 +01:00
Song Liu
baf1b12a67 perf: fix perf_event_context->time
Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.

Fixes: 09f5e7dc7a ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org
2023-03-15 21:49:46 +01:00
Yang Jihong
eb81a2ed4f perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
  dump_stack+0x9c/0xd3
  print_address_description.constprop.0+0x19/0x170
  __kasan_report.cold+0x6c/0x84
  kasan_report+0x3a/0x50
  __perf_event_header__init_id+0x34/0x290
  perf_event_header__init_id+0x48/0x60
  perf_output_begin+0x4a4/0x560
  perf_event_bpf_output+0x161/0x1e0
  perf_iterate_sb_cpu+0x29e/0x340
  perf_iterate_sb+0x4c/0xc0
  perf_event_bpf_event+0x194/0x2c0
  __bpf_prog_put.constprop.0+0x55/0xf0
  __cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
  cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
  process_one_work+0x3c2/0x730
  worker_thread+0x93/0x650
  kthread+0x1b8/0x210
  ret_from_fork+0x1f/0x30

commit 267fb27352 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.

However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.

Fixes: 267fb27352 ("perf: Reduce stack usage of perf_output_begin()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com
2023-03-15 21:49:46 +01:00
Zack Rusin
328839ff93 drm/vmwgfx: Fix src/dst_pitch confusion
The src/dst_pitch got mixed up during the rework of the function, make
sure the offset's refer to the correct one.

Spotted by clang:
Clang warns (or errors with CONFIG_WERROR):

  drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:509:29: error: variable 'dst_pitch' is uninitialized when used here [-Werror,-Wuninitialized]
          src_offset = ddirty->top * dst_pitch + ddirty->left * stdu->cpp;
                                     ^~~~~~~~~
  drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:492:26: note: initialize the variable 'dst_pitch' to silence this warning
          s32 src_pitch, dst_pitch;
                                  ^
                                   = 0
  1 error generated.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1811
Fixes: 39985eea5a ("drm/vmwgfx: Abstract placement selection")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314211445.1363828-1-zack@kde.org
2023-03-15 16:15:25 -04:00
Leo Yan
96d541699e perf kvm: Update documentation to reflect new changes
Update documentation for new sorting and option '--stdio'.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:53:43 -03:00
Leo Yan
984f16cd60 perf kvm: Add TUI mode for stat report
Since we have supported histograms list and prepared the dimensions in
the tool, this patch adds TUI mode for stat report.  It also adds UI
progress for sorting for better user experience.

Committer notes:

kvm_display() is only used by functions enclosed in:

  #if defined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)

So do it with this new function as well.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:53:35 -03:00
Naohiro Aota
e15acc2588 btrfs: zoned: drop space_info->active_total_bytes
The space_info->active_total_bytes is no longer necessary as we now
count the region of newly allocated block group as zone_unusable. Drop
its usage.

Fixes: 6a921de589 ("btrfs: zoned: introduce space_info->active_total_bytes")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:07 +01:00
Naohiro Aota
fa2068d7e9 btrfs: zoned: count fresh BG region as zone unusable
The naming of space_info->active_total_bytes is misleading. It counts
not only active block groups but also full ones which are previously
active but now inactive. That confusion results in a bug not counting
the full BGs into active_total_bytes on mount time.

For a background, there are three kinds of block groups in terms of
activation.

  1. Block groups never activated
  2. Block groups currently active
  3. Block groups previously active and currently inactive (due to fully
     written or zone finish)

What we really wanted to exclude from "total_bytes" is the total size of
BGs #1. They seem empty and allocatable but since they are not activated,
we cannot rely on them to do the space reservation.

And, since BGs #1 never get activated, they should have no "used",
"reserved" and "pinned" bytes.

OTOH, BGs #3 can be counted in the "total", since they are already full
we cannot allocate from them anyway. For them, "total_bytes == used +
reserved + pinned + zone_unusable" should hold.

Tracking #2 and #3 as "active_total_bytes" (current implementation) is
confusing. And, tracking #1 and subtract that properly from "total_bytes"
every time you need space reservation is cumbersome.

Instead, we can count the whole region of a newly allocated block group as
zone_unusable. Then, once that block group is activated, release
[0 ..  zone_capacity] from the zone_unusable counters. With this, we can
eliminate the confusing ->active_total_bytes and the code will be common
among regular and the zoned mode. Also, no additional counter is needed
with this approach.

Fixes: 6a921de589 ("btrfs: zoned: introduce space_info->active_total_bytes")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:07 +01:00
Josef Bacik
df384da5a4 btrfs: use temporary variable for space_info in btrfs_update_block_group
We do

  cache->space_info->counter += num_bytes;

everywhere in here.  This is makes the lines longer than they need to
be, and will be especially noticeable when we add the active tracking in,
so add a temp variable for the space_info so this is cleaner.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:06 +01:00
Josef Bacik
bf1f1fec27 btrfs: rename BTRFS_FS_NO_OVERCOMMIT to BTRFS_FS_ACTIVE_ZONE_TRACKING
This flag only gets set when we're doing active zone tracking, and we're
going to need to use this flag for things related to this behavior.
Rename the flag to represent what it actually means for the file system
so it can be used in other ways and still make sense.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:06 +01:00
Naohiro Aota
9e1cdf0c35 btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile
btrfs_can_activate_zone() returns true if at least one device has one zone
available for activation. This is OK for the single profile, but not OK for
DUP profile. We need two zones to create a DUP block group. Fix it by
properly handling the case with the profile flags.

Fixes: 265f7237dd ("btrfs: zoned: allow DUP on meta-data block groups")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:06 +01:00
Sweet Tea Dorminy
10a8857a1b btrfs: fix compiler warning on SPARC/PA-RISC handling fscrypt_setup_filename
Commit 1ec49744ba ("btrfs: turn on -Wmaybe-uninitialized") exposed
that on SPARC and PA-RISC, gcc is unaware that fscrypt_setup_filename()
only returns negative error values or 0. This ultimately results in a
maybe-uninitialized warning in btrfs_lookup_dentry().

Change to only return negative error values or 0 from
fscrypt_setup_filename() at the relevant call site, and assert that no
positive error codes are returned (which would have wider implications
involving other users).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:06 +01:00
Qu Wenruo
1c3ab6dfa0 btrfs: handle missing chunk mapping more gracefully
[BUG]
During my scrub rework, I did a stupid thing like this:

        bio->bi_iter.bi_sector = stripe->logical;
        btrfs_submit_bio(fs_info, bio, stripe->mirror_num);

Above bi_sector assignment is using logical address directly, which
lacks ">> SECTOR_SHIFT".

This results a read on a range which has no chunk mapping.

This results the following crash:

  BTRFS critical (device dm-1): unable to find logical 11274289152 length 65536
  assertion failed: !IS_ERR(em), in fs/btrfs/volumes.c:6387

Sure this is all my fault, but this shows a possible problem in real
world, that some bit flip in file extents/tree block can point to
unmapped ranges, and trigger above ASSERT(), or if CONFIG_BTRFS_ASSERT
is not configured, cause invalid pointer access.

[PROBLEMS]
In the above call chain, we just don't handle the possible error from
btrfs_get_chunk_map() inside __btrfs_map_block().

[FIX]
The fix is straightforward, replace the ASSERT() with proper error
handling (callers handle errors already).

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-15 20:51:05 +01:00
Leo Yan
32a5c2b842 perf kvm: Add dimensions for percentages
Add dimensions for count and time percentages, it would be useful for
user to review percentage statistics.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:49:57 -03:00
Leo Yan
fbb70bd310 perf kvm: Support printing attributions for dimensions
This patch adds header, entry callback and width for every dimension,
thus in TUI mode the tool can print items with the defined attributions.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:49:44 -03:00
Leo Yan
c695d48a33 perf kvm: Polish sorting key
Since histograms supports sorting, the tool doesn't need to maintain the
mapping between the sorting keys and the corresponding comparison
callbacks, therefore, this patch removes structure kvm_event_key.

But we still need to validate the sorting key, this patch uses an array
for sorting keys and renames function select_key() to is_valid_key()
to validate the sorting key passed by user.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:49:31 -03:00
Leo Yan
f57a64142c perf kvm: Use histograms list to replace cached list
perf kvm tool defines its own cached list which is managed with RB tree,
histograms also provide RB tree to manage data entries.  Since now we
have introduced histograms in the tool, it's not necessary to use the
self defined list and we can directly use histograms list to manage
KVM events.

This patch changes to use histograms list to track KVM events, and it
invokes the common function hists__output_resort_cb() to sort result,
this also give us flexibility to extend more sorting key words easily.

After histograms list supported, the cached list is redundant so remove
the relevant code for it.

Committer notes:

kvm_hists__reinit() is only used by functions enclosed in:

  #if defined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)

So do it with this new function as well.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:48:43 -03:00
Leo Yan
41f1138e5c perf kvm: Add dimensions for KVM event statistics
To support KVM event statistics, this patch firstly registers histograms
columns and sorting fields; every column or field has its own format
structure, the format structure is dereferenced to access the dimension,
finally the dimension provides the comparison callback for sorting
result.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:47:33 -03:00
Leo Yan
ebf39d29b9 perf hist: Add 'kvm_info' field in histograms entry
__hists__add_entry() creates a temporary entry and compare it with
existed histograms entries, if any existed entry equals to the
temporary entry it skips to allocation to avoid duplication.

The problem for support KVM event in histograms is it doesn't contain
any info to identify KVM event and can be used for comparison entries.

This patch adds 'kvm_info' field in the histograms entry which contains
the KVM event's key, this identifier will be used for comparison
histograms entries in later change.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:47:20 -03:00
Leo Yan
001b08f4e2 perf kvm: Parse address location for samples
Parse address location for samples and save it into the structure
'perf_kvm_stat', it is to be used by histograms entry.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:46:53 -03:00
Leo Yan
730651f717 perf kvm: Pass argument 'sample' to kvm_alloc_init_event()
This patch adds an argument 'sample' for kvm_alloc_init_event(), and its
caller functions are updated as well for passing down the 'sample'
pointer.

This is a preparation change to allow later patch to create histograms
entries for kvm event, no any functionality changes.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:46:40 -03:00
Leo Yan
2d08124b08 perf kvm: Introduce histograms data structures
This is a preparation to support histograms in perf kvm tool.  As first
step, this patch defines histograms data structures and initialize them.

Committer notes:

Those are only used by functions enclosed in:

  #if efined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)

So do this for these new functions and struct as well.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:46:05 -03:00
Leo Yan
2d31e0bff2 perf kvm: Use macro to replace variable 'decode_str_len'
The variable 'decode_str_len' defines the string length for KVM event
name and every arch defines its own values.

This introduces complexity that the variable definition are spreading in
multiple source files under arch folder.  This patch refactors code to
use a macro KVM_EVENT_NAME_LEN to define event name length and thus
remove the definitions in arch files.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:43:34 -03:00
Leo Yan
dd787ae4e8 perf kvm: Use subtraction for comparison metrics
Currently the metrics comparison uses greater operator (>), it returns
the boolean value (0 or 1).

This patch changes to use subtraction as comparison result, which can
be used by histograms sorting.  Since the subtraction result is u64
type, we change key_cmp_fun's return type to int64_t to avoid overflow.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:43:18 -03:00
Leo Yan
f098376d16 perf kvm: Move up metrics helpers
This patch moves up the helper functions of event's metrics for later
adding code to call them.

No any functionality changes, but has a function renaming from
compare_kvm_event_{metric}() to cmp_event_{metric}().

Committer notes:

Those helper functions are only used if this is true:

  if defined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)

So keep them enclosed with that.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:42:55 -03:00
Linus Torvalds
9c1bec9c0b linux-kselftest-fixes-6.3-rc3
This kselftest fixes update for Linux 6.3-rc3 consists of a fix to
 amd-pstate test Makefile and a fix to LLVM build for i386 and x86_64
 in kselftest common lib.mk.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmQSDZ8ACgkQCwJExA0N
 QxwBDA/9FskE3TVhoTmB3XkDzrKDJqgvYxOwo6TbUU+/gRXqBN5d8047eX9vRRav
 TgTGS+TMLSm1+Mp1iDiz64x7hxeWcs5v9xTqVbCUqjZPPcxq3K4vT6ekBRHULYg+
 eJVN3J+TxbMCxUrOLceojU81zypTg0KLNmPns5ghM1GVf/34YYmHjOsTUBrqMMxc
 WWkDF7J9KC3sIYHg4+aFzUR/GQnjQKbyx/u+5cwY9abiC1AwTFOpWnNogoQphq9J
 qTo2kinQGRm0AOXbZE1SxnZMRosLleZ1NfbYMyaNDLCoXyedRjB4n6u6mtZ79gBR
 lqp761GWT8xtH5e7gSXuzUlWZ6s1EUgTadQyHT/6gHcBrorVCRGaHhc0UTf3SOBU
 7czfWgDcfXIt6+Y9ARXhfdoTDo4n5xSGl7tt4RUKyA2CUcF5PnYEea//smRocwO8
 Ze+Lz3StqpeW/FluX98yMzs14HRB2O+iL22SLRHIRAhKKo9K0gVd5P4G5KWX6Eto
 YR7dD9aIgNiUWlEzjBCb4V9zLmD+54Cq202I/IR4WO1/jOLU2xfY4k7oHGKTLB0+
 EOcGnXupCMjLFVgycaFB/g68ZejtAotpVbzI4+1y+1wWx+/pwch1NrARd0cWyj5a
 RI56dBQPlqYrB3RS9aNdTAmIuoe4VmqsaGXXypwGissxNzaY8r0=
 =ITKW
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
  kselftest common lib.mk"

* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: fix LLVM build for i386 and x86_64
  selftests: amd-pstate: fix TEST_FILES
2023-03-15 12:20:37 -07:00
Leo Yan
a7d451a873 perf kvm: Add pointer to 'perf_kvm_stat' in kvm event
Sometimes, handling kvm events needs to base on global variables, e.g.
when read event counts we need to know the target vcpu ID; the global
variables are stored in structure perf_kvm_stat.

This patch adds add a 'perf_kvm_stat' pointer in kvm event structure,
it is to be used by later refactoring.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:14:04 -03:00
Leo Yan
9c3aa1f411 perf kvm: Refactor overall statistics
Currently the tool computes overall statistics when sort the results.
This patch refactors overall statistics during events processing,
therefore, the function update_total_coun() is not needed anymore, an
extra benefit is we can de-couple code between the statistics and the
sorting.

This patch is not expected any functionality changes.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-15 16:13:45 -03:00
Jens Axboe
23e5b9307e Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.3
Pull MD fixes from Song:

"This set contains two fixes for old issues (by Neil) and one fix
 for 6.3 (by Xiao)."

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: select BLOCK_LEGACY_AUTOLOAD
  md: avoid signed overflow in slot_store()
  md: Free resources in __md_stop
2023-03-15 12:18:07 -06:00
NeilBrown
6c0f589883 md: select BLOCK_LEGACY_AUTOLOAD
When BLOCK_LEGACY_AUTOLOAD is not enable, mdadm is not able to
activate new arrays unless "CREATE names=yes" appears in
mdadm.conf

As this is a regression we need to always enable BLOCK_LEGACY_AUTOLOAD
for when MD is selected - at least until mdadm is updated and the
updates widely available.

Cc: stable@vger.kernel.org # v5.18+
Fixes: fbdee71bb5 ("block: deprecate autoloading based on dev_t")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
2023-03-15 11:12:14 -07:00
Yu Kuai
5f27571382 block: count 'ios' and 'sectors' when io is done for bio-based device
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.

Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.

Fixes: 394ffa503b ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-15 09:25:04 -06:00
Liang He
6030363199 block: sunvdc: add check for mdesc_grab() returning NULL
In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.

Fixes: 43fdf27470 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-15 08:48:58 -06:00
GuoRui.Yu
7c3940bf81 swiotlb: fix the deadlock in swiotlb_do_find_slots
In general, if swiotlb is sufficient, the logic of index =
wrap_area_index(mem, index + 1) is fine, it will quickly take a slot and
release the area->lock; But if swiotlb is insufficient and the device
has min_align_mask requirements, such as NVME, we may not be able to
satisfy index == wrap and exit the loop properly. In this case, other
kernel threads will not be able to acquire the area->lock and release
the slot, resulting in a deadlock.

The current implementation of wrap_area_index does not involve a modulo
operation, so adjusting the wrap to ensure the loop ends is not trivial.
Introduce a new variable to record the number of loops and exit the loop
after completing the traversal.

Backtraces:
Other CPUs are waiting this core to exit the swiotlb_do_find_slots
loop.
[10199.924391] RIP: 0010:swiotlb_do_find_slots+0x1fe/0x3e0
[10199.924403] Call Trace:
[10199.924404]  <TASK>
[10199.924405]  swiotlb_tbl_map_single+0xec/0x1f0
[10199.924407]  swiotlb_map+0x5c/0x260
[10199.924409]  ? nvme_pci_setup_prps+0x1ed/0x340
[10199.924411]  dma_direct_map_page+0x12e/0x1c0
[10199.924413]  nvme_map_data+0x304/0x370
[10199.924415]  nvme_prep_rq.part.0+0x31/0x120
[10199.924417]  nvme_queue_rq+0x77/0x1f0

...
[ 9639.596311] NMI backtrace for cpu 48
[ 9639.596336] Call Trace:
[ 9639.596337]
[ 9639.596338] _raw_spin_lock_irqsave+0x37/0x40
[ 9639.596341] swiotlb_do_find_slots+0xef/0x3e0
[ 9639.596344] swiotlb_tbl_map_single+0xec/0x1f0
[ 9639.596347] swiotlb_map+0x5c/0x260
[ 9639.596349] dma_direct_map_sg+0x7a/0x280
[ 9639.596352] __dma_map_sg_attrs+0x30/0x70
[ 9639.596355] dma_map_sgtable+0x1d/0x30
[ 9639.596356] nvme_map_data+0xce/0x370

...
[ 9639.595665] NMI backtrace for cpu 50
[ 9639.595682] Call Trace:
[ 9639.595682]
[ 9639.595683] _raw_spin_lock_irqsave+0x37/0x40
[ 9639.595686] swiotlb_release_slots.isra.0+0x86/0x180
[ 9639.595688] dma_direct_unmap_sg+0xcf/0x1a0
[ 9639.595690] nvme_unmap_data.part.0+0x43/0xc0

Fixes: 1f221a0d0d ("swiotlb: respect min_align_mask")
Signed-off-by: GuoRui.Yu <GuoRui.Yu@linux.alibaba.com>
Signed-off-by: Xiaokang Hu <xiaokang.hxk@alibaba-inc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-03-15 15:47:40 +01:00
Conor Dooley
e77da13b8e riscv: dts: microchip: fix the mpfs' mailbox regs
The mailbox on PolarFire SoC should really have three reg properties,
not two. Without splitting into three sections, the system controller's
QSPI cannot be accessed as it sits inside the current first range. The
driver & binding have been adapted to account for both two & three
ranges, so fix the dts too.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-15 14:43:48 +00:00
Jesse Taube
49f965b6fb soc: canaan: Make K210_SYSCTL depend on CLK_K210
CLK_K210 is no longer a dependency of SOC_CANAAN,
but K210_SYSCTL depends on CLK_K210. This patch makes K210_SYSCTL
depend on CLK_K210. Also fix whitespace errors.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/42446784-a88b-df09-41e9-5f685b4df6ee@infradead.org
Fixes: 3af577f982 ("RISC-V: stop directly selecting drivers for SOC_CANAAN")
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-03-15 14:22:53 +00:00
Palmer Dabbelt
4b740779ac
Merge patch series "RISC-V: Apply Zicboz to clear_page"
Andrew Jones <ajones@ventanamicro.com> says:

When the Zicboz extension is available we can more rapidly zero naturally
aligned Zicboz block sized chunks of memory. As pages are always page
aligned and are larger than any Zicboz block size will be, then
clear_page() appears to be a good candidate for the extension. While cycle
count and energy consumption should also be considered, we can be pretty
certain that implementing clear_page() with the Zicboz extension is a win
by comparing the new dynamic instruction count with its current count[1].
Doing so we see that the new count is just over a quarter of the old count
(see patch6's commit message for more details).

For those of you who reviewed v1[2], you may be looking for the memset()
patches. As pointed out in v1, and a couple follow-up emails, it's not
clear that patching memset() is a win yet. When I get a chance to test
on real hardware with a comprehensive benchmark collection then I can
post the memset() patches separately (assuming the benchmarks show it's
worthwhile).

* b4-shazam-merge:
  RISC-V: KVM: Expose Zicboz to the guest
  RISC-V: KVM: Provide UAPI for Zicboz block size
  RISC-V: Use Zicboz in clear_page when available
  RISC-V: cpufeatures: Put the upper 16 bits of patch ID to work
  RISC-V: Add Zicboz detection and block size parsing
  dt-bindings: riscv: Document cboz-block-size
  RISC-V: Factor out body of riscv_init_cbom_blocksize loop
  RISC-V: alternatives: Support patching multiple insns in assembly

Link: https://lore.kernel.org/r/20230224162631.405473-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-15 07:11:08 -07:00