Commit graph

1,185,212 commits

Author SHA1 Message Date
Konrad Dybcio
0d589dc92f arm64: dts: qcom: pm8998: Add a specific compatible for coincell chg
Add a PM8998-specific compatible to the coincell charger and keep the
PM8941 one as fallback.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214090849.2186370-3-konrad.dybcio@linaro.org
2023-03-14 19:30:46 -07:00
Konrad Dybcio
b5d08f0837 arm64: dts: qcom: msm8998: Fix stm-stimulus-base reg name
The name stm-data-base comes from ancient (msm-3.10 or older)
downstream kernels. Upstream uses stm-stimulus-base instead. Fix it.

Fixes: 783abfa224 ("arm64: dts: qcom: msm8998: Add Coresight support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213210331.2106877-1-konrad.dybcio@linaro.org
2023-03-14 19:30:46 -07:00
Konrad Dybcio
5a0c6d4349 arm64: dts: qcom: sm6375: Add RMTFS
Add a node for RMTFS on SM6375.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213175928.1979637-1-konrad.dybcio@linaro.org
2023-03-14 19:30:46 -07:00
Krzysztof Kozlowski
d228efe884 arm64: dts: qcom: sm8550-qrd: add QRD8550
Add a minimal DTS for the new QRD8550 board - a mobile-like development
board with SM8550.  Serial, UFS and USB should be working.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230210163844.765074-2-krzysztof.kozlowski@linaro.org
2023-03-14 19:30:46 -07:00
Abel Vesa
749078e38e arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node
Add the PMIC eUSB2 repeater node and add the usb-repeater
property to the eUSB2 PHY to allow it to be controlled by the
PHY driver.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-8-abel.vesa@linaro.org
2023-03-14 19:30:46 -07:00
Neil Armstrong
fdaa922585 arm64: dts: qcom: pm8550b: Add eUSB2 repeater node
Add nodes for the eUSB2 repeater found on the pm8550b SPMI PMIC.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-7-abel.vesa@linaro.org
2023-03-14 19:30:46 -07:00
Abel Vesa
32734bbd18 arm64: dts: qcom: sm8550: Fix PCIe PHYs and controllers nodes
First, move the pinctrl related propeties out from SoC dtsi and into the
board dts and add blank lines before status properties in the PHY nodes
to be consistent with the rest of the nodes. Then drop the pipe clock
from the controller nodes. Rename the aggre0 and aggre1 clocks to more
generic noc_aggr, and then the cnoc_pcie_sf_axi to cnoc_sf_axi. Add the
cpu-pcie interconnects to both controller nodes. Rename the pcie1 second
reset to link_down and drop the unnecessary enable-gpios. Switch the aux
clock to GCC_PCIE_1_PHY_AUX_CLK for the pcie1 PHY and drop the aux_phy
from clock-names. Also rename the nocsr reset to phy_nocsr. With this
changes we are now in line with the SC8280XP bindings.

Fixes: 7d1158c984 ("arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-12-abel.vesa@linaro.org
2023-03-14 19:30:22 -07:00
Dylan Jhong
47dd902aae
RISC-V: mm: Support huge page in vmalloc_fault()
Since RISC-V supports ioremap() with huge page (pud/pmd) mapping,
However, vmalloc_fault() assumes that the vmalloc range is limited
to pte mappings. To complete the vmalloc_fault() function by adding
huge page support.

Fixes: 310f541a02 ("riscv: Enable HAVE_ARCH_HUGE_VMAP for 64BIT")
Cc: stable@vger.kernel.org
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230310075021.3919290-1-dylan@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-14 19:15:34 -07:00
Paulo Alcantara
396935de14 cifs: fix use-after-free bug in refresh_cache_worker()
The UAF bug occurred because we were putting DFS root sessions in
cifs_umount() while DFS cache refresher was being executed.

Make DFS root sessions have same lifetime as DFS tcons so we can avoid
the use-after-free bug is DFS cache refresher and other places that
require IPCs to get new DFS referrals on.  Also, get rid of mount
group handling in DFS cache as we no longer need it.

This fixes below use-after-free bug catched by KASAN

[ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56
[ 379.948096]
[ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23
[ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 379.949942] Call Trace:
[ 379.950113] <TASK>
[ 379.950260] dump_stack_lvl+0x50/0x67
[ 379.950510] print_report+0x16a/0x48e
[ 379.950759] ? __virt_addr_valid+0xd8/0x160
[ 379.951040] ? __phys_addr+0x41/0x80
[ 379.951285] kasan_report+0xdb/0x110
[ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs]
[ 379.953637] ? __pfx___mutex_lock+0x10/0x10
[ 379.953915] ? lock_release+0xb6/0x720
[ 379.954167] ? __pfx_lock_acquire+0x10/0x10
[ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs]
[ 379.954960] ? __pfx_wb_workfn+0x10/0x10
[ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs]
[ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs]
[ 379.956323] ? __pfx_lock_acquired+0x10/0x10
[ 379.956615] ? read_word_at_a_time+0xe/0x20
[ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220
[ 379.957235] process_one_work+0x535/0x990
[ 379.957509] ? __pfx_process_one_work+0x10/0x10
[ 379.957812] ? lock_acquired+0xb7/0x5f0
[ 379.958069] ? __list_add_valid+0x37/0xd0
[ 379.958341] ? __list_add_valid+0x37/0xd0
[ 379.958611] worker_thread+0x8e/0x630
[ 379.958861] ? __pfx_worker_thread+0x10/0x10
[ 379.959148] kthread+0x17d/0x1b0
[ 379.959369] ? __pfx_kthread+0x10/0x10
[ 379.959630] ret_from_fork+0x2c/0x50
[ 379.959879] </TASK>

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-03-14 21:07:44 -05:00
Paulo Alcantara
b56bce502f cifs: set DFS root session in cifs_get_smb_ses()
Set the DFS root session pointer earlier when creating a new SMB
session to prevent racing with smb2_reconnect(), cifs_reconnect_tcon()
and DFS cache refresher.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-03-14 21:05:53 -05:00
Ondrej Zary
dc472c7612 ata: pata_parport: fix parport release without claim
When adapter is not found, pi->disconnect() is called without previous
pi->connect(). This results in error like this:
parport0: pata_parport tried to release parport when not owner

Add missing out_disconnect label and use it correctly.

Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-03-15 10:35:00 +09:00
Chris Leech
00e885efcf blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
The 'q' parameter of the macro __blk_mq_run_dispatch_ops may not be one
local variable, such as, it is rq->q, then request queue pointed by
this variable could be changed to another queue in case of
BLK_MQ_F_TAG_QUEUE_SHARED after 'dispatch_ops' returns, then
'bad unlock balance' is triggered.

Fixes the issue by adding one local variable for doing srcu lock/unlock.

Fixes: 2a904d0085 ("blk-mq: remove hctx_lock and hctx_unlock")
Cc: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230310010913.1014789-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14 19:20:55 -06:00
Bart Van Assche
9b0cb770f5 loop: Fix use-after-free issues
do_req_filebacked() calls blk_mq_complete_request() synchronously or
asynchronously when using asynchronous I/O unless memory allocation fails.
Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor
'rq' after do_req_filebacked() finished unless we are sure that the request
has not yet been completed. This patch fixes the following kernel crash:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054
Call trace:
 css_put.42938+0x1c/0x1ac
 loop_process_work+0xc8c/0xfd4
 loop_rootcg_workfn+0x24/0x34
 process_one_work+0x244/0x558
 worker_thread+0x400/0x8fc
 kthread+0x16c/0x1e0
 ret_from_fork+0x10/0x20

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Fixes: c74d40e8b5 ("loop: charge i/o to mem and blk cg")
Fixes: bc07c10a36 ("block: loop: support DIO & AIO")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14 19:20:48 -06:00
Yang Yingliang
f1d97a37f9 clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt()
The device_node pointer returned by of_find_compatible_node() with
refcount incremented, when finish using it, the refcount need be
decreased.

Fixes: d7964de8a8 ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221229092946.4162345-1-yangyingliang@huawei.com
[sboyd@kernel.org: Also unmap on error]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-14 17:53:11 -07:00
Rob Herring
d02fddf24f clk: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144701.1541504-1-robh@kernel.org
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-14 17:35:38 -07:00
Linus Torvalds
26e2878b3e Eleven hotfixes. Four of these are cc:stable and the remainder address
post-6.2 issues or aren't considered suitable for backporting.  Seven of
 these fixes are for MM.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZBEItgAKCRDdBJ7gKXxA
 jsF/AP0ToKnDwmZ1SJOGK3pFiVGVy7VSaq1THrnLQoC57l8jTAD+PReSZMNXaxhB
 8701hVQcxKAiu9wAvowSd+lOvpwHMwQ=
 =IANU
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2023-03-14-16-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Eleven hotfixes.

  Four of these are cc:stable and the remainder address post-6.2 issues
  or aren't considered suitable for backporting.

  Seven of these fixes are for MM"

* tag 'mm-hotfixes-stable-2023-03-14-16-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/damon/paddr: fix folio_nr_pages() after folio_put() in damon_pa_mark_accessed_or_deactivate()
  mm/damon/paddr: fix folio_size() call after folio_put() in damon_pa_young()
  ocfs2: fix data corruption after failed write
  migrate_pages: try migrate in batch asynchronously firstly
  migrate_pages: move split folios processing out of migrate_pages_batch()
  migrate_pages: fix deadlock in batched migration
  .mailmap: add Alexandre Ghiti personal email address
  mailmap: correct Dikshita Agarwal's Qualcomm email address
  mailmap: updates for Jarkko Sakkinen
  mm/userfaultfd: propagate uffd-wp bit when PTE-mapping the huge zeropage
  mm: teach mincore_hugetlb about pte markers
2023-03-14 17:13:58 -07:00
Linus Torvalds
29db00c252 Tracing fixes for v6.3
- Do not allow histogram values to have modifies.
   Can cause a NULL pointer dereference if they do.
 
 - Warn if hist_field_name() is passed a NULL.
   Prevent the NULL pointer dereference mentioned above.
 
 - Fix invalid address look up race in lookup_rec()
 
 - Define ftrace_stub_graph conditionally to prevent linker errors
 
 - Always check if RCU is watching at all tracepoint locations
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBDuTBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qsboAP4yfrFYvIIKM5EkzkEiPI+V2hdlA12x
 bt839jO5AWCmhAEAiY8FmKatpBJQKsiGqSOab8aHOMnhGFZwltCHAPa9PAI=
 =vtA2
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

 - Do not allow histogram values to have modifies. They can cause a NULL
   pointer dereference if they do.

 - Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
   dereference mentioned above.

 - Fix invalid address look up race in lookup_rec()

 - Define ftrace_stub_graph conditionally to prevent linker errors

 - Always check if RCU is watching at all tracepoint locations

* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Make tracepoint lockdep check actually test something
  ftrace,kcfi: Define ftrace_stub_graph conditionally
  ftrace: Fix invalid address access in lookup_rec() when index is 0
  tracing: Check field value in hist_field_name()
  tracing: Do not let histogram values have some modifiers
2023-03-14 17:07:54 -07:00
Linus Torvalds
ed38ff164f Zstd fixes for v6.3
A small number of fixes for zstd-v1.5.2.
 
 I'm not pulling in zstd-v1.5.4 from upstream this release because it
 didn't have any time to bake in linux-next, but I'm aiming for the next
 update in v6.4.
 
 I've rebased my tree onto v6.2 to remove the incorrect back merges as
 suggested by Linus in my initial PR for v6.3 [0].
 
 [0] https://lore.kernel.org/lkml/C8C4DFDA-998F-48AD-93C9-DE16F8080A02@meta.com/
 
 Signed-off-by: Nick Terrell <terrelln@fb.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEmIwAqlFIzbQodPwyuzRpqaNEqPUFAmQPxq4ACgkQuzRpqaNE
 qPUC/w/+OnUlhZu4RKQuiZsHtmtFdWBgPxti3nCC/kYdNxTcX1LXKTvVU54WpgMG
 pbEh2CN9l5isKOcoCOtmU6Mbt0WxUWhK5P1OGqVjrgjt3bubMlwR5t5JZ7D1RIH4
 TgAFOOB64x1Q0dWSuZmkLX8rFTsu1ig8jJGpCRiKkG+ckK+PqeJLszzEmtj+bmuT
 fRn4WpItg9DBcoS/SBWjC9/CC1K1rzsuZghwDWzo5OP6wBF+VugMuZ/wXT9uY3yT
 y0lhB3mBmIZZSZwD/t7gZN3aVD8550W8taZGJ7T3fdIsurmlPKEqefIJ1bFKalfc
 ZR7j3v/ro3t+uwvFlzZuxnnNXSavk7yz/wLjAnQhW4RYXDt7Gso3+pDCMDHha2oE
 An3DqAha5KaOsJlW97mka1527El6gmK0xsAHPQ29waj1H6a7IYq2fGaFdUA/3L7c
 s5qtuUuhn3FyVX8POr79jPJa9xNiT4gj63V18s/4lChuHKPHBAlS07OsbbUY33Ep
 q+O1zb6fYQpgcCV/gv4yHKoGMdCOZzpp2VCtKS9gz/XU40NV1qLurCWM+wYJc94Y
 Afkthf6BLX41kmqtNzS2g/CZUN1rH3mHJrG8RKm68+rIHB4dvzG55VUwjXdj+2gY
 OYakXRlEw4S4YiNn4uFg6OoaSlYJJASusVK1Ed7MpnkCiLNAxS4=
 =1tCu
 -----END PGP SIGNATURE-----

Merge tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux

Pull zstd fixes from Nick Terrell:
 "A small number of fixes for zstd-v1.5.2.

  I'm not pulling in zstd-v1.5.4 from upstream this release because it
  didn't have any time to bake in linux-next, but I'm aiming for the
  next update in v6.4"

* tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux:
  zstd: Fix definition of assert()
  lib: zstd: Backport fix for in-place decompression
  lib: zstd: Fix -Wstringop-overflow warning
2023-03-14 17:03:25 -07:00
Linus Torvalds
c0856b7c14 The collection of clk driver fixes, and a couple OF clk patches to fix
regressions seen in the last few weeks. The fwnode patch broke the build
 for one driver that isn't always compiled, so I waited over the weekend
 to be certain no more build issues came up.
 
 [Note: I'm looking at the module license patches in here after gregkh
 questioned them on the list. They're coming into my inbox in dribbles,
 and I thought they were necessary to fix some build issue but that
 doesn't seem to be the case so I stopped applying any more. They're
 still potentially useful because it slightly speeds up builds if we
 don't need to include module.h for module macros. If you're flat out
 opposed I'll rewind this branch and send a new pull request. Please let
 me know.]
 
  - Mark the firmware node (fwnode) that matches the compatible in
    CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
    after fw_devlink stopped checking parent nodes in
    of_link_to_phandle()
  - Remove a couple MODULE_LICENSE macros in non-modules
  - Update the maintainers file for Microchip clk drivers
  - Select instead of depend on the REGMAP config to fix Kconfig issues
  - Use div_u64() for portable 64-bit division in K210 clk driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmQPqa4RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVmUhAA3ao4KKdjx1qZ360Vx/MoqOdlxLhiqv0/
 SOU3ZrUAYomH6VivwZwZmSWq2i0yJ/CPMtYRYmBUhZqAuscjX94GtsDmr5xkD1Am
 4zCIQPsnCB5Y50KVwfliMf6jPl+LATDjrqTRZ+JdC7UpgppftSXUQ9a+nczJbjsF
 TzqBELaIMgsv79lWO7k0SDgPh2JMRyOtE8TxZz4Bc36qjCLPgPQLPeo6W+JMCcHT
 3O+DozjDMBFpQIGlA9A2m/i5GG7o3dtGe41eyE/1CKTVlYPsA1q68aNhnr4bo4B7
 PRDvcJWuDwPg/0J5srns4/nFwVXTvm8g9zCoVCHrfnxZt3LCIrclm3SOO0sBJgmt
 7XCs6NnUt5TpUQWDdEUH1rUbrZ3YfGfGNAFF1Eteqv36Cxo7r++MgJ4d6IFoB7vd
 YreEa6/qHGjZaOxPJ1932JIp2D/oeJyJ+Nb3gUQzZYCuTQLiEs46A7WRNpTBJ0Zf
 yoAjejZTLXeIRGMCjD53ujzuK/cyhNTPapg/tSNPdk3HVLQK5SAnop+S+gqXQ8X/
 TDRRyRLZbJU6P2GWcv6TgZS1Up5L6rYVxpmIpFdi4XJKwG7mL+p0LlRqBnQf4mw3
 5pot+p8/G+hLyUqCT7ZxUmDceacyA2kjfp1zD/be8RKQu3uUSeAgsfvQPvaqw+bU
 5mtYE0EecG4=
 =EGt2
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A collection of clk driver fixes, and a couple OF clk patches to fix
  regressions seen in the last few weeks. The fwnode patch broke the
  build for one driver that isn't always compiled, so I waited over the
  weekend to be certain no more build issues came up.

   - Mark the firmware node (fwnode) that matches the compatible in
     CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
     after fw_devlink stopped checking parent nodes in
     of_link_to_phandle()

   - Remove a couple MODULE_LICENSE macros in non-modules

   - Update the maintainers file for Microchip clk drivers

   - Use 'select' instead of 'depend on' for the REGMAP config to fix
     Kconfig issues

   - Use div_u64() for portable 64-bit division in K210 clk driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Avoid invalid function names in CLK_OF_DECLARE()
  clk: k210: remove an implicit 64-bit division
  MAINTAINERS: add missing clock driver coverage for Microchip FPGAs
  clk: HI655X: select REGMAP instead of depending on it
  kbuild, clk: remove MODULE_LICENSE in non-modules
  kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modules
  clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro
2023-03-14 16:58:33 -07:00
Tejun Heo
b8a2e3f93d cgroup: Make current_cgns_cgroup_dfl() safe to call after exit_task_namespace()
The commit 332ea1f697 ("bpf: Add bpf_cgroup_from_id() kfunc") added
bpf_cgroup_from_id() which calls current_cgns_cgroup_dfl() through
cgroup_get_from_id(). However, BPF programs may be attached to a point where
current->nsproxy has already been cleared to NULL by exit_task_namespace()
and calling bpf_cgroup_from_id() would cause an oops.

Just return the system-wide root if nsproxy has been cleared. This allows
all cgroups to be looked up after the task passed through
exit_task_namespace(), which semantically makes sense. Given that the only
way to get this behavior is through BPF programs, it seems safe but let's
see what others think.

Fixes: 332ea1f697 ("bpf: Add bpf_cgroup_from_id() kfunc")
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/ZBDuVWiFj2jiz3i8@slm.duckdns.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 16:56:20 -07:00
Nathan Huckleberry
f959325e6a fsverity: Remove WQ_UNBOUND from fsverity read workqueue
WQ_UNBOUND causes significant scheduler latency on ARM64/Android.  This
is problematic for latency sensitive workloads, like I/O
post-processing.

Removing WQ_UNBOUND gives a 96% reduction in fsverity workqueue related
scheduler latency and improves app cold startup times by ~30ms.
WQ_UNBOUND was also removed from the dm-verity workqueue for the same
reason [1].

This code was tested by running Android app startup benchmarks and
measuring how long the fsverity workqueue spent in the runnable state.

Before
Total workqueue scheduler latency: 553800us
After
Total workqueue scheduler latency: 18962us

[1]: https://lore.kernel.org/all/20230202012348.885402-1-nhuck@google.com/

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 8a1d0f9cac ("fs-verity: add data verification hooks for ->readpages()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230310193325.620493-1-nhuck@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-03-14 16:16:36 -07:00
Shyam Prasad N
05ce0448c3 cifs: generate signkey for the channel that's reconnecting
Before my changes to how multichannel reconnects work, the
primary channel was always used to do a non-binding session
setup. With my changes, that is not the case anymore.
Missed this place where channel at index 0 was forcibly
updated with the signing key.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-03-14 17:36:49 -05:00
Volker Lendecke
211baef0ea cifs: Fix smb2_set_path_size()
If cifs_get_writable_path() finds a writable file, smb2_compound_op()
must use that file's FID and not the COMPOUND_FID.

Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-03-14 17:36:44 -05:00
Alexei Starovoitov
3c2611bac0 selftests/bpf: Fix trace_virtqueue_add_sgs test issue with LLVM 17.
LLVM commit https://reviews.llvm.org/D143726 introduced hoistMinMax optimization
that transformed
  (i < VIRTIO_MAX_SGS) && (i < out_sgs)
into
  i < MIN(VIRTIO_MAX_SGS, out_sgs)

and caused the verifier to stop recognizing such loop as bounded.

Which resulted in the following test failure:

libbpf: prog 'trace_virtqueue_add_sgs': BPF program load failed: Bad address
libbpf: prog 'trace_virtqueue_add_sgs': -- BEGIN PROG LOAD LOG --
The sequence of 8193 jumps is too complex.
verification time 789206 usec
stack depth 56
processed 156446 insns (limit 1000000) max_states_per_insn 7 total_states 1746 peak_states 1701 mark_read 12
-- END PROG LOAD LOG --
libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -14
libbpf: failed to load object 'loop6.bpf.o'

Workaround the verifier limitation for now with inline asm that
prevents this particular optimization.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 15:28:11 -07:00
Alexei Starovoitov
5584d9e63e Merge branch 'xdp: recycle Page Pool backed skbs built from XDP frames'
Alexander Lobakin says:

====================

Yeah, I still remember that "Who needs cpumap nowadays" (c), but anyway.

__xdp_build_skb_from_frame() missed the moment when the networking stack
became able to recycle skb pages backed by a page_pool. This was making
e.g. cpumap redirect even less effective than simple %XDP_PASS. veth was
also affected in some scenarios.
A lot of drivers use skb_mark_for_recycle() already, it's been almost
two years and seems like there are no issues in using it in the generic
code too. {__,}xdp_release_frame() can be then removed as it losts its
last user.
Page Pool becomes then zero-alloc (or almost) in the abovementioned
cases, too. Other memory type models (who needs them at this point)
have no changes.

Some numbers on 1 Xeon Platinum core bombed with 27 Mpps of 64-byte
IPv6 UDP, iavf w/XDP[0] (CONFIG_PAGE_POOL_STATS is enabled):

Plain %XDP_PASS on baseline, Page Pool driver:

src cpu Rx     drops  dst cpu Rx
  2.1 Mpps       N/A    2.1 Mpps

cpumap redirect (cross-core, w/o leaving its NUMA node) on baseline:

  6.8 Mpps  5.0 Mpps    1.8 Mpps

cpumap redirect with skb PP recycling:

  7.9 Mpps  5.7 Mpps    2.2 Mpps
                       +22% (from cpumap redir on baseline)

[0] https://github.com/alobakin/linux/commits/iavf-xdp
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 15:20:05 -07:00
Alexander Lobakin
d4e492338d xdp: remove unused {__,}xdp_release_frame()
__xdp_build_skb_from_frame() was the last user of
{__,}xdp_release_frame(), which detaches pages from the page_pool.
All the consumers now recycle Page Pool skbs and page, except mlx5,
stmmac and tsnep drivers, which use page_pool_release_page() directly
(might change one day). It's safe to assume this functionality is not
needed anymore and can be removed (in favor of recycling).

Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-5-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 15:20:05 -07:00
Alexander Lobakin
9c94bbf9a8 xdp: recycle Page Pool backed skbs built from XDP frames
__xdp_build_skb_from_frame() state(d):

/* Until page_pool get SKB return path, release DMA here */

Page Pool got skb pages recycling in April 2021, but missed this
function.

xdp_release_frame() is relevant only for Page Pool backed frames and it
detaches the page from the corresponding page_pool in order to make it
freeable via page_frag_free(). It can instead just mark the output skb
as eligible for recycling if the frame is backed by a pp. No change for
other memory model types (the same condition check as before).
cpumap redirect and veth on Page Pool drivers now become zero-alloc (or
almost).

Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-4-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 15:20:05 -07:00
Alexander Lobakin
2c854e5fcd net: page_pool, skbuff: make skb_mark_for_recycle() always available
skb_mark_for_recycle() is guarded with CONFIG_PAGE_POOL, this creates
unneeded complication when using it in the generic code. For now, it's
only used in the drivers always selecting Page Pool, so this works.
Move the guards so that preprocessor will cut out only the operation
itself and the function will still be a noop on !PAGE_POOL systems,
but available there as well.
No functional changes.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303020342.Wi2PRFFH-lkp@intel.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 15:20:04 -07:00
Alexander Lobakin
487deb3e33 selftests/bpf: robustify test_xdp_do_redirect with more payload magics
Currently, the test relies on that only dropped ("xmitted") frames will
be recycled and if a frame became an skb, it will be freed later by the
stack and never come back to its page_pool.
So, it easily gets broken by trying to recycle skbs[0]:

  test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec
  test_xdp_do_redirect:FAIL:pkt_count_zero unexpected pkt_count_zero:
actual 9936 != expected 2
  test_xdp_do_redirect:PASS:pkt_count_tc 0 nsec

That huge mismatch happened because after the TC ingress hook zeroes the
magic, the page gets recycled when skb is freed, not returned to the MM
layer. "Live frames" mode initializes only new pages and keeps the
recycled ones as is by design, so they appear with zeroed magic on the
Rx path again.
Expand the possible magic values from two: 0 (was "xmitted"/dropped or
did hit the TC hook) and 0x42 (hit the input XDP prog) to three: the new
one will mark frames hit the TC hook, so that they will elide both
@pkt_count_zero and @pkt_count_xdp. They can then be recycled to their
page_pool or returned to the page allocator, this won't affect the
counters anyhow. Just make sure to mark them as "input" (0x42) when they
appear on the Rx path again.
Also make an enum from those magics, so that they will be always visible
and can be changed in just one place anytime. This also eases adding any
new marks later on.

Link: https://github.com/kernel-patches/bpf/actions/runs/4386538411/jobs/7681081789
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-2-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-14 15:20:04 -07:00
Steven Rostedt (Google)
c2679254b9 tracing: Make tracepoint lockdep check actually test something
A while ago where the trace events had the following:

   rcu_read_lock_sched_notrace();
   rcu_dereference_sched(...);
   rcu_read_unlock_sched_notrace();

If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).

But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.

The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).

Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.

Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-14 17:50:09 -04:00
Thomas Richter
4c290d4fa3 perf vendor events s390: Add metric for TLB and cache
Add metrics for tlb and cache statistics:

- finite_cpi: Cycles per Instructions from Finite cache/memory
- est_cpi: Estimated Instruction Complexity CPI infinite Level 1
- scpl1m: Estimated Sourcing Cycles per Level 1 Miss
- tlb_percent: Estimated TLB CPU percentage of Total CPU
- tlb_miss: Estimated Cycles per TLB Miss

For details about the formulas see this documentation:

  https://www.ibm.com/support/pages/system/files/inline-files/CPU%20MF%20Formulas%20including%20z16%20-%20May%202022_1.pdf

Output after:

  # ./perf stat -M tlb_miss -- dd if=/dev/zero of=/dev/null bs=1M count=10K
  ... dd output removed

  Performance counter stats for 'dd if=/dev/zero of=/dev/null bs=1M count=10K':

           667,726      DTLB2_MISSES             #   440.96 tlb_miss
               198      ITLB2_WRITES
       795,170,260      L1C_TLB2_MISSES
             9,478      ITLB2_MISSES
               820      DTLB2_WRITES
     1,197,126,869      L1D_PENALTY_CYCLES
         2,457,447      L1I_PENALTY_CYCLES

       1.249342187 seconds time elapsed

       0.001030000 seconds user
       1.248105000 seconds sys

  #

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230313080201.2440201-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:36:08 -03:00
Thomas Richter
850eea236f perf vendor events s390: Add cache metrics for z13
Add metrics for s390 z13

- Percentage sourced from Level 2 cache
- Percentage sourced from Level 3 on same chip cache
- Percentage sourced from Level 4 Local cache on same book
- Percentage sourced from Level 4 Remote cache on different book
- Percentage sourced from memory

For details about the formulas see this documentation:

  https://www.ibm.com/support/pages/system/files/inline-files/CPU%20MF%20Formulas%20including%20z16%20-%20May%202022_1.pdf

Output after:

  # ./perf stat -M l4rp -- find /
   ...find output deleted

  Performance counter stats for 'find /':

            2      L1I_OFFDRAWER_SCOL_L4_SOURCED_WRITES #     0.02 l4rp
          252      L1D_ONDRAWER_L4_SOURCED_WRITES
        3,465      L1D_ONDRAWER_L3_SOURCED_WRITES_IV
           80      L1D_OFFDRAWER_SCOL_L4_SOURCED_WRITES
          761      L1D_ONDRAWER_L3_SOURCED_WRITES
            0      L1I_OFFDRAWER_SCOL_L3_SOURCED_WRITES
  131,817,067      L1I_DIR_WRITES
            1      L1I_OFFDRAWER_FCOL_L4_SOURCED_WRITES
          447      L1D_OFFDRAWER_SCOL_L3_SOURCED_WRITES
           22      L1D_OFFDRAWER_FCOL_L4_SOURCED_WRITES
            7      L1I_ONDRAWER_L4_SOURCED_WRITES
            0      L1I_OFFDRAWER_FCOL_L3_SOURCED_WRITES
        1,071      L1D_OFFDRAWER_FCOL_L3_SOURCED_WRITES
            3      L1I_ONDRAWER_L3_SOURCED_WRITES
       13,352      L1D_OFFDRAWER_FCOL_L3_SOURCED_WRITES_IV
       15,252      L1D_OFFDRAWER_SCOL_L3_SOURCED_WRITES_IV
            0      L1I_ONDRAWER_L3_SOURCED_WRITES_IV
            0      L1I_OFFDRAWER_FCOL_L3_SOURCED_WRITES_IV
   57,431,083      L1D_DIR_WRITES
            0      L1I_OFFDRAWER_SCOL_L3_SOURCED_WRITES_IV

      15.386502874 seconds time elapsed

       0.647348000 seconds user
       3.537041000 seconds sys

  #

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230313080201.2440201-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:36:04 -03:00
Thomas Richter
add7894a25 perf vendor events s390: Add cache metrics for z14
Add metrics for s390 z14

- Percentage sourced from Level 2 cache
- Percentage sourced from Level 3 on same chip cache
- Percentage sourced from Level 4 Local cache on same book
- Percentage sourced from Level 4 Remote cache on different book
- Percentage sourced from memory

For details about the formulas see this documentation:

  https://www.ibm.com/support/pages/system/files/inline-files/CPU%20MF%20Formulas%20including%20z16%20-%20May%202022_1.pdf

Output after:

  # ./perf stat -M l4rp -- find /
  .... find output deleted

  Performance counter stats for 'find /':

             0      L1I_OFFDRAWER_L4_SOURCED_WRITES  #     0.01 l4rp
            84      L1D_OFFDRAWER_L4_SOURCED_WRITES
             0      L1I_OFFDRAWER_L3_SOURCED_WRITES
    71,535,353      L1I_DIR_WRITES
           219      L1D_OFFDRAWER_L3_SOURCED_WRITES
        16,436      L1D_OFFDRAWER_L3_SOURCED_WRITES_IV
             0      L1I_OFFDRAWER_L3_SOURCED_WRITES_IV
    46,343,940      L1D_DIR_WRITES

  10.530805537 seconds time elapsed

   0.774396000 seconds user
   1.602714000 seconds sys

  #

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230313080201.2440201-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:35:54 -03:00
Thomas Richter
bdecfecac8 perf vendor events s390: Add cache metrics for z15
Add metrics for s390 z15

- Percentage sourced from Level 2 cache
- Percentage sourced from Level 3 on same chip cache
- Percentage sourced from Level 4 Local cache on same book
- Percentage sourced from Level 4 Remote cache on different book
- Percentage sourced from memory

For details about the formulas see this documentation:

  https://www.ibm.com/support/pages/system/files/inline-files/CPU%20MF%20Formulas%20including%20z16%20-%20May%202022_1.pdf

Outpuf after:
  # ./perf stat -M l4rp -- find /
  .... find output deleted

  Performance counter stats for 'find /':

              5      L1I_OFFDRAWER_L4_SOURCED_WRITES  #     0.01 l4rp
            187      L1D_OFFDRAWER_L4_SOURCED_WRITES
              0      L1I_OFFDRAWER_L3_SOURCED_WRITES
    231,333,165      L1I_DIR_WRITES
          3,303      L1D_OFFDRAWER_L3_SOURCED_WRITES
         47,461      L1D_OFFDRAWER_L3_SOURCED_WRITES_IV
              0      L1I_OFFDRAWER_L3_SOURCED_WRITES_IV
    126,706,244      L1D_DIR_WRITES

   27.870355461 seconds time elapsed

    0.521562000 seconds user
   12.494503000 seconds sys
  #

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230313080201.2440201-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:35:48 -03:00
Ian Rogers
3da9559e41 perf vendor events intel: Update skylake events
Update from v54 to v55. Addition of OFFCORE_RESPONSE,
FP_ARITH_INST_RETIRED.SCALAR, FP_ARITH_INST_RETIRED.VECTOR and
INT_MISC.CLEARS_COUNT.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230314053312.3237390-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:31:43 -03:00
Ian Rogers
591530c0f5 perf vendor events intel: Update meteorlake events
Update from 1.00 to 1.01. Event description updates. Addition of
IDQ_BUBBLES.CORE, TOPDOWN.BACKEND_BOUND_SLOTS, UOPS_RETIRED.SLOTS.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230314053312.3237390-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:31:37 -03:00
Ian Rogers
b720bf9033 perf vendor events intel: Update graniterapids events
Update from 1.00 to 1.01, some event description updates.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230314053312.3237390-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 18:31:03 -03:00
Rafał Miłecki
e6d356b146 arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers
This device has 2 USB LEDs meant to be triggered by devices in relevant
USB ports.

While at it fix typo in USB LED name.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144520.21816-3-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:21:54 -07:00
Rafał Miłecki
889e53cccc arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers
This device has 2 USB LEDs meant to be triggered by devices in relevant
USB ports.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144520.21816-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:21:27 -07:00
Rafał Miłecki
477cad715d arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
BCM4908 has 3 USB controllers each with 2 USB ports. Home routers often
have LEDs indicating state of selected USB ports. Describe those SoC USB
ports to allow using them as LED trigger sources.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144520.21816-1-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:20:51 -07:00
Rafał Miłecki
f16a8294dd arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
        From schema: schemas/simple-bus.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:15:16 -07:00
Rafał Miłecki
23be9f68f9 arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:15:11 -07:00
Rafał Miłecki
5cca024494 arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:15:06 -07:00
Florian Fainelli
69160dd0aa soc: bcm: brcmstb: Remove bare-metal ARM suspend/resume code
Since 2018 these platforms have supported entry via the ARM Trusted
Firmware using the standard PSCI SYSTEM_SUSPEND function calls. Remove
this legacy code.

Link: https://lore.kernel.org/r/20230224215249.239405-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:12:17 -07:00
Nick Alcock
122b084d16 kbuild, soc: bcm: bcm2835-power: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:07:17 -07:00
Nick Alcock
89cc9abe55 kbuild, soc: bcm: raspberrypi-power: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:07:17 -07:00
Ye Xingchen
9cf38a0914 bus: brcmstb_gisb: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302081537158530029@zte.com.cn
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:07:16 -07:00
William Zhang
7858dded8c ARM: dts: broadcom: bcmbca: Add spi controller node
Add support for HSSPI controller in ARMv7 chip dts files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230207065826.285013-4-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:07:06 -07:00
William Zhang
f5d83b714e arm64: dts: broadcom: bcmbca: Add spi controller node
Add support for HSSPI controller in ARMv8 chip dts files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230207065826.285013-5-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:06:52 -07:00
Rob Herring
47600f84a8 arm64: dts: broadcom: stringray: Fix GICv3 ITS node name
The GICv3 ITS is an MSI controller, therefore its node name should be
'msi-controller'.

While we're here, fix the unit-address which shouldn't have a comma.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207234709.201229-1-robh@kernel.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2023-03-14 14:06:52 -07:00