According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230308063653.92879-1-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following warning in rtl871x_mlme.c
WARNING: Avoid multiple line dereference - prefer 'adapter->securitypriv.PrivacyAlgrthm'
Signed-off-by: Shibo Li <zzutcyha@163.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> AW-NU120
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230220084050.18459-1-zzutcyha@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD Erratum 1386 is summarised as:
XSAVES Instruction May Fail to Save XMM Registers to the Provided
State Save Area
This piece of accidental chronomancy causes the %xmm registers to
occasionally reset back to an older value.
Ignore the XSAVES feature on all AMD Zen1/2 hardware. The XSAVEC
instruction (which works fine) is equivalent on affected parts.
[ bp: Typos, move it into the F17h-specific function. ]
Reported-by: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
Every now and then reports come in that are puzzled on why changing
affinity on the io-wq workers fails with EINVAL. This happens because they
set PF_NO_SETAFFINITY as part of their creation, as io-wq organizes
workers into groups based on what CPU they are running on.
However, this is purely an optimization and not a functional requirement.
We can allow setting affinity, and just lazily update our worker to wqe
mappings. If a given io-wq thread times out, it normally exits if there's
no more work to do. The exception is if it's the last worker available.
For the timeout case, check the affinity of the worker against group mask
and exit even if it's the last worker. New workers should be created with
the right mask and in the right location.
Reported-by:Daniel Dao <dqminh@cloudflare.com>
Link: https://lore.kernel.org/io-uring/CA+wXwBQwgxB3_UphSny-yAP5b26meeOu1W4TwYVcD_+5gOhvPw@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use devm_bitmap_zalloc() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/c073b1607ada34d5bde6ce1009179cf15bbf0da3.1657308593.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.
Add more strict checking of SCMI mailbox transport device node descriptors.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The T: entries shall be composed of a SCM tree type (git, hg, quilt, stgit
or topgit) and location.
Add the SCM tree type to the T: entry and reorder the file entries in
alphabetical order.
Fixes: ddc84c9053 ("MAINTAINERS: update idmapping tree")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Enable yamllint to check the preferred commenting style of requiring a
space after a comment character '#'. Fix the cases in the tree which
have a warning with this enabled. Most cases just need a space after the
'#'. A couple of cases with comments which were not intended to be
comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and
brcm,bcmgenet.yaml.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230303214223.49451-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Before commit fd571df0ac ("block, bfq: turn bfqq_data into an array
in bfq_io_cq"), process reference is read before bfq_put_stable_ref(),
and it's safe if bfq_put_stable_ref() put the last reference, because
process reference will be 0 and 'stable_merge_bfqq' won't be accessed
in this case. However, the commit changed the order and will cause
uaf for 'stable_merge_bfqq'.
In order to emphasize that bfq_put_stable_ref() can drop the last
reference, fix the problem by moving bfq_put_stable_ref() to the end of
bfq_setup_stable_merge().
Fixes: fd571df0ac ("block, bfq: turn bfqq_data into an array in bfq_io_cq")
Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/linux-block/20230307071448.rzihxbm4jhbf5krj@shindev/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nvmem producer config ID "-1" is actually defined, so use the definition
rather than hardcoding it with a magic value.
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/linux-mtd/20230307192536.470997-1-miquel.raynal@bootlin.com
* Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
* Fix error path for nvmem provider
* Fix nvmem error reporting
* Provide unique name for nvmem device
These changes are expected to be pulled before applying nvmem layouts
support in order to get a fully working support in all situations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmQIkRoACgkQJWrqGEe9
VoR0vwf/ZkhNer2rVnC7S47P4Lvw5KHMt7p7cM2no3obM2A3JYi2qrRRw3e3RkZq
CboUOKqjbKgQ+WxLnj18M9MqPac+rSKiU28Ji+Cx3x0yycubFRWewYH+vZ3VNdP8
w/sO1+uBp7rkL9fa2lR1ZmBqCFAXLI2fglhV09JQuOH+VJHe1XVQOBfrJrSwU8Ne
rxlSndEew5vldQA1nDOP4BqXKaiYoLbaLuig8y17nEJ+d1MvN8NVzBqwAWVKgihn
0zsD5s+ew9BGZ5JmUwn0QmkAbX9HrQEMLERA7shixaZ4DHwK84HRgOGX6cr01fV6
AHZx7svX11rSEUf5rng2UlClOSCoXg==
=Is2Q
-----END PGP SIGNATURE-----
Merge tag 'mtd/core-fixes-before-nvmem-layouts-for-6.4' into mtd/next
Core MTD changes:
* Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
* Fix error path for nvmem provider
* Fix nvmem error reporting
* Provide unique name for nvmem device
These changes are expected to be pulled before applying nvmem layouts
support in order to get a fully working support in all situations.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230224150811.80316-19-nick.alcock@oracle.com
Fix a race where kthread_stop() may prevent the threadfn from ever getting
called. If that happens the svc_rqst will not be cleaned up.
Fixes: ed6473ddc7 ("NFSv4: Fix callback server shutdown")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NVMEM soon will get the ability for nvmem layouts and these might
not be ready when nvmem_register() is called and thus it might
return -EPROBE_DEFER. Don't print the error message in this case.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-4-michael@walle.cc
If mtd_otp_nvmem_add() fails, the partitions won't be removed
because there is simply no call to del_mtd_partitions().
Unfortunately, add_mtd_partitions() will print all partitions to
the kernel console. If mtd_otp_nvmem_add() returns -EPROBE_DEFER
this would print the partitions multiple times to the kernel
console. Instead move mtd_otp_nvmem_add() to the beginning of the
function.
Fixes: 4b361cfa86 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-3-michael@walle.cc
The master MTD will only have an associated device if
CONFIG_MTD_PARTITIONED_MASTER is set, thus we cannot use dev_err() on
mtd->dev. Instead use the parent device which is the physical flash
memory.
Fixes: 4b361cfa86 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-2-michael@walle.cc
Commit c048b60d39 ("mtd: core: provide unique name for nvmem device")
tries to give the nvmem device a unique name, but fails badly if the mtd
device doesn't have a "struct device" associated with it, i.e. if
CONFIG_MTD_PARTITIONED_MASTER is not set. This will result in the name
"(null)-user-otp", which is not unique. It seems the best we can do is
to use the compatible name together with a unique identifier added by
the nvmem subsystem by using NVMEM_DEVID_AUTO.
Fixes: c048b60d39 ("mtd: core: provide unique name for nvmem device")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-1-michael@walle.cc
A couple of arguments to a function call are incorrectly indented.
Fix them.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
This test runs on the client-router-server topo, and monitors the traffic
on the RX devices of router and server while sending BIG TCP packets with
netperf from client to server. Meanwhile, it changes 'tso' on the TX devs
and 'gro' on the RX devs. Then it checks if any BIG TCP packets appears
on the RX devs with 'ip/ip6tables -m length ! --length 0:65535' for each
case.
Note that we also add tc action ct in link1 ingress to cover the ipv6
jumbo packets process in nf_ct_skb_network_trim() of nf_conntrack_ovs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
For IPv6 Jumbo packets, the ipv6_hdr(skb)->payload_len is always 0,
and its real payload_len ( > 65535) is saved in hbh exthdr. With 0
length for the jumbo packets, all data and exthdr will be trimmed
in nf_ct_skb_network_trim().
This patch is to call nf_ip6_check_hbh_len() to get real pkt_len
of the IPv6 packet, similar to br_validate_ipv6().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Rename br_nf_check_hbh_len() to nf_ip6_check_hbh_len() and move it
to netfilter utils, so that it can be used by other modules, like
ovs and tc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
br_nf_check_hbh_len() is a function to check the Hop-by-hop option
header, and shouldn't do pskb_trim_rcsum() there. This patch is to
pass pkt_len out to br_validate_ipv6() and do pskb_trim_rcsum()
after calling br_validate_ipv6() instead.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
In the while loop of br_nf_check_hbh_len(), similar to ip6_parse_tlv(),
before accessing 'nh[off + 1]', it should add a check 'len < 2'; and
before parsing IPV6_TLV_JUMBO, it should add a check 'optlen > len',
in case of overflows.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When checking Hop-by-hop option header, if the option data is in
nonlinear area, it should do pskb_may_pull instead of discarding
the skb as a bad IPv6 packet.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 0091bfc817 ("io_uring/af_unix: defer registered
files gc to io_uring release") added one bit to struct sk_buff.
This structure is critical for networking, and we try very hard
to not add bloat on it, unless absolutely required.
For instance, we can use a specific destructor as a wrapper
around unix_destruct_scm(), to identify skbs that unix_gc()
has to special case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nftables equivalent for ebtables -t broute.
Implement broute meta statement to set br_netfilter_broute flag
in skb to force a packet to be routed instead of being bridged.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Florian Westphal <fw@strlen.de>
Steen Hegelund says:
====================
Add support for TC flower templates in Sparx5
This adds support for the TC template mechanism in the Sparx5 flower filter
implementation.
Templates are as such handled by the TC framework, but when a template is
created (using a chain id) there are by definition no filters on this
chain (an error will be returned if there are any).
If the templates chain id is one that is represented by a VCAP lookup, then
when the template is created, we know that it is safe to use the keys
provided in the template to change the keyset configuration for the (port,
lookup) combination, if this is needed to improve the match on the
template.
The original port keyset configuration is captured in the template state
information which is kept per port, so that when the template is deleted
the port keyset configuration can be restored to its previous setting.
The template also provides the protocol parameter which is the basic
information that is used to find out which port keyset configuration needs
to be changed.
The VCAPs and lookups are slightly different when it comes to which keys,
keysets and protocol are supported and used for selection, so in some
cases a bit of tweaking is needed to find a useful match. This is done by
e.g. removing a key that prevents the best matching keyset from being
selected.
The debugfs output that is provided for a port allows inspection of the
currently used keyset in each of the VCAPs lookups. So when a template has
been created the debugfs output allows you to verify if the keyset
configuration has been changed successfully.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for using the "template add" and "template destroy"
functionality to change the port keyset configuration.
If the VCAP lookup already contains rules, the port keyset is left
unchanged, as a change would make these rules unusable.
When the template is destroyed the port keyset configuration is restored.
The filters using the template chain will automatically be deleted by the
TC framework.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this its is now possible for clients (like TC) to change the port
keyset configuration in the Sparx5 VCAPs.
This is typically done per traffic class which is guided with the L3
protocol information.
Before the change the current keyset configuration is collected in a list
that is handed back to the client.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a list that is used to collect the templates that are active on a
port.
This allows the template creation to change the port configuration
and the template destruction to change it back.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides these 3 functions in the VCAP API:
- Count the number of rules in a VCAP lookup (chain)
- Remove a key from a VCAP rule
- Find the keyset that gives the smallest rule list from a list of keysets
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the name used in the debugfs output.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix deletion of existing DSCP mappings in the APP table.
Adding and deleting DSCP entries are replicated per-port, since the
mapping table is global for all ports in the chip. Whenever a mapping
for a DSCP value already exists, the old mapping is deleted first.
However, it is only deleted for the specified port. Fix this by calling
sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be.
Reproduce:
// Map and remap DSCP value 63
$ dcb app add dev eth0 dscp-prio 63:1
$ dcb app add dev eth0 dscp-prio 63:2
$ dcb app show dev eth0 dscp-prio
dscp-prio 63:2
$ dcb app show dev eth1 dscp-prio
dscp-prio 63:1 63:2 <-- 63:1 should not be there
Fixes: 8dcf69a641 ("net: microchip: sparx5: add support for offloading dscp table")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.
Fixes: 4a3581cd59 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The line endings must be preserved on gpio-controller, io-supply, and
reset-gpios properties to look proper when the YAML file is parsed.
Currently it's interpreted as a single line when parsed. Change the style
of the description of these properties to literal style to preserve the
line endings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge thermal control updates for 6.4-rc1:
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano).
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano).
- Clean up the hwmon thermal driver (Daniel Lezcano).
- Add thermal zone id accessor and thermal zone type accessor
and prevent drivers from using thermal zone fields directly (Daniel
Lezcano).
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).
* thermal-core:
thermal/drivers/acerhdf: Remove pointless governor test
thermal/drivers/acerhdf: Make interval setting only at module load time
thermal/drivers/tegra: Remove unneeded lock when setting a trip point
thermal/hwmon: Use the thermal_core.h header
thermal/drivers/da9062: Don't access the thermal zone device fields
thermal: Use thermal_zone_device_type() accessor
thermal: Add a thermal zone id accessor
thermal/drivers/spear: Don't use tz->device but pdev->dev
thermal/core: Add thermal_zone_device structure 'type' accessor
thermal: Don't use 'device' internal thermal zone structure field
thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()
thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
thermal: Remove debug or error messages in get_temp() ops
thermal/core: Show a debug message when get_temp() fails
thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
thermal/core: Use the thermal zone 'devdata' accessor in hwmon located drivers
thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
thermal/core: Add a thermal zone 'devdata' accessor
Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.
For the application, the general usages of MSG_FASTOPEN likes
fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)
Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.
Fixes: ee9dfbef02 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>