Commit graph

1,185,212 commits

Author SHA1 Message Date
Md Sadre Alam
bcf09d7e2f mtd: nand: raw: qcom_nandc: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230306144141.15360-1-quic_mdalam@quicinc.com
2023-03-07 10:11:52 +01:00
Greg Kroah-Hartman
22fd6153c1 driver core: class: fix block class problem when removing CONFIG_SYSFS_DEPRECATED*
In removing the CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2
config options, I messed up in the __class_register() function and got
the logic incorrect.  Fix this all up by just removing the special case
of a block device class logic in this function, as that is what is
intended.

In testing, this solves the boot problem on my systems, hopefully on
others as well.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 721da5cee9 ("driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2")
Link: https://lore.kernel.org/r/20230307075102.3537-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-07 09:24:29 +01:00
Neil Armstrong
0262f27369 arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard
Add support for both the BananaPi BPI-CM4 module and the BananaPi
baseboard which is compatible with the RaspberryPi CM4IO baseboard.

The BananaPi BPI-CM4 module follows the CM4 specifications at [1],
but with a single HDMI port and a single DSI output.

The current CM4IO baseboard DT should work fine on the Raspberry CM4
baseboard and other derivatives baseboards, but proper DT should
be written for other baseboards.

The split is done so it's easy to describe a new CM4 baseboard, enabling
only the necessary HW used on the baseboard.

[1] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf

Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230303-topic-amlogic-upstream-bpi-cm4-v2-2-2ecfde76fc4d@linaro.org
[narmstrong: fixed typos in commit message]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07 09:02:03 +01:00
Neil Armstrong
92c0b261c2 dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected
The BPI-CM4 module with an Amlogic A311D SoC is a module compatible
with the Raspberry Pi CM4 specifications.

Document the boards using this module, by specifying the BananaPi CM4
compatible in addition to the baseboard compatible.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230303-topic-amlogic-upstream-bpi-cm4-v2-1-2ecfde76fc4d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07 09:01:40 +01:00
Jerome Brunet
c2e9012bb3 arm64: dts: amlogic: gxl: use gxl mdio multiplexer
So the far, GXL SoCs were using the generic mmio register based mdio
multiplexer. This properly sets one of the glue register but the SoC
actually has 3 of those registers.

One of them sets the ID under which the internal phy will advertise
itself. If nothing sets this register before linux boots (like u-boot), the
internal phy path is broken.

To address this problem, a dedicated MDIO mux driver has been
introduced. Switch to this new driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230306151354.132973-1-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07 08:57:29 +01:00
Alexey Romanov
ea254644a2 arm64: dts: meson-a1: add gpio_intc node
Add gpio interrupt controller node.

Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230202141520.40003-1-avromanov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07 08:56:59 +01:00
Sam Protsenko
f05dc20243 clk: samsung: exynos5433: Extract PM support to common ARM64 layer
Exynos5433 clock driver implements PM support internally, which might be
also useful for other Exynos clock drivers. Extract all PM related code
from clk-exynos5433 to common ARM64 functions.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230307002423.24454-4-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-07 08:38:54 +01:00
Sam Protsenko
454e8d296c clk: samsung: Extract parent clock enabling to common function
Extract parent clock enabling from exynos_arm64_register_cmu() to
dedicated function.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230307002423.24454-3-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-07 08:38:54 +01:00
Sam Protsenko
bed76f697a clk: samsung: Extract clocks registration to common function
It might be useful to have a separate clocks registration function, so
it can be called from different users. Extract that common code from
samsung_cmu_register_one() to samsung_cmu_register_clocks(). Also make
that new function global as it's going to be used in other modules
further.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230307002423.24454-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-07 08:38:54 +01:00
Al Viro
849ad04cf5 new helper: put_and_unmap_page()
kunmap_local() + put_page(), as done by e.g. ext2 directory handling.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-07 01:50:53 -05:00
Jakub Kicinski
36e5e391a2 bpf-next-for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZAZsBwAKCRDbK58LschI
 g3W1AQCQnO6pqqX5Q2aYDAZPlZRtV2TRLjuqrQE0dHW/XLAbBgD/bgsAmiKhPSCG
 2mTt6izpTQVlZB0e8KcDIvbYd9CE3Qc=
 =EjJQ
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-03-06

We've added 85 non-merge commits during the last 13 day(s) which contain
a total of 131 files changed, 7102 insertions(+), 1792 deletions(-).

The main changes are:

1) Add skb and XDP typed dynptrs which allow BPF programs for more
   ergonomic and less brittle iteration through data and variable-sized
   accesses, from Joanne Koong.

2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF
   open-coded iterators allowing for less restrictive looping capabilities,
   from Andrii Nakryiko.

3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
   programs to NULL-check before passing such pointers into kfunc,
   from Alexei Starovoitov.

4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
   local storage maps, from Kumar Kartikeya Dwivedi.

5) Add BPF verifier support for ST instructions in convert_ctx_access()
   which will help new -mcpu=v4 clang flag to start emitting them,
   from Eduard Zingerman.

6) Make uprobe attachment Android APK aware by supporting attachment
   to functions inside ELF objects contained in APKs via function names,
   from Daniel Müller.

7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper
   to start the timer with absolute expiration value instead of relative
   one, from Tero Kristo.

8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id,
   from Tejun Heo.

9) Extend libbpf to support users manually attaching kprobes/uprobes
   in the legacy/perf/link mode, from Menglong Dong.

10) Implement workarounds in the mips BPF JIT for DADDI/R4000,
   from Jiaxun Yang.

11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT,
    from Hengqi Chen.

12) Extend BPF instruction set doc with describing the encoding of BPF
    instructions in terms of how bytes are stored under big/little endian,
    from Jose E. Marchesi.

13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui.

14) Fix bpf_xdp_query() backwards compatibility on old kernels,
    from Yonghong Song.

15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS,
    from Florent Revest.

16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache,
    from Hou Tao.

17) Fix BPF verifier's check_subprogs to not unnecessarily mark
    a subprogram with has_tail_call, from Ilya Leoshkevich.

18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
  selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode
  selftests/bpf: Split test_attach_probe into multi subtests
  libbpf: Add support to set kprobe/uprobe attach mode
  tools/resolve_btfids: Add /libsubcmd to .gitignore
  bpf: add support for fixed-size memory pointer returns for kfuncs
  bpf: generalize dynptr_get_spi to be usable for iters
  bpf: mark PTR_TO_MEM as non-null register type
  bpf: move kfunc_call_arg_meta higher in the file
  bpf: ensure that r0 is marked scratched after any function call
  bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper
  bpf: clean up visit_insn()'s instruction processing
  selftests/bpf: adjust log_fixup's buffer size for proper truncation
  bpf: honor env->test_state_freq flag in is_state_visited()
  selftests/bpf: enhance align selftest's expected log matching
  bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER}
  bpf: improve stack slot state printing
  selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access()
  selftests/bpf: test if pointer type is tracked for BPF_ST_MEM
  bpf: allow ctx writes using BPF_ST_MEM instruction
  bpf: Use separate RCU callbacks for freeing selem
  ...
====================

Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06 20:36:39 -08:00
Jakub Kicinski
757b56a6c7 bpf-for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZAZZ1wAKCRDbK58LschI
 g4fcAQDYVsICeBDmhdBdZs7Kb91/s6SrU6B0jy4zs0gOIBBOhgD7B3jt3dMTD2tp
 rPLHlv6uUoYS7mbZsrZi/XjVw8UmewM=
 =VUnr
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-03-06

We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 9 files changed, 64 insertions(+), 18 deletions(-).

The main changes are:

1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier,
   that is, keep resolving such instances instead of bailing out,
   from Lorenz Bauer.

2) Fix BPF test framework with regards to xdp_frame info misplacement
   in the "live packet" code, from Alexander Lobakin.

3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX,
   from Liu Jian.

4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n,
   from Randy Dunlap.

5) Several BPF doc fixes with either broken links or external instead
   of internal doc links, from Bagas Sanjaya.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: check that modifier resolves after pointer
  btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
  bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES
  bpf, doc: Link to submitting-patches.rst for general patch submission info
  bpf, doc: Do not link to docs.kernel.org for kselftest link
  bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
  riscv, bpf: Fix patch_text implicit declaration
  bpf, docs: Fix link to BTF doc
====================

Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06 20:28:00 -08:00
Krishna chaitanya chundru
8a63441e83 arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.

Cc: stable@vger.kernel.org
Fixes: 92e0ee9f83 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
2023-03-06 20:17:10 -08:00
Yang Xiwen
eaba416688 arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
The previous commit mistakenly introduced sim_ctrl_default as pinctrl,
this is incorrect, the interface for sim card selection varies between
different devices and should not be placed in the dtsi.

This commit selects external SIM card slot for ufi001c as default.
uf896 selects the correct SIM card slot automatically, thus does not need
this pinctrl node.

Fixes: faf6943146 ("arm64: dts: qcom: msm8916-thwc: Add initial device trees")
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_7036BCA256055D05F8C49D86DF7F0E2D1A05@qq.com
2023-03-06 20:14:09 -08:00
Luca Weiss
749d56bd5c soc: qcom: rmtfs: handle optional qcom,vmid correctly
Older platforms don't have qcom,vmid set, handle -EINVAL return value
correctly. And since num_vmids is passed to of_property_read_u32_array
later we should make sure it has a sane value before continuing.

Fixes: e656cd0bcf ("soc: qcom: rmtfs: Optionally map RMTFS to more VMs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305-rmtfs-vmid-fix-v1-2-6a7206081602@z3ntu.xyz
2023-03-06 20:13:06 -08:00
Luca Weiss
947007419b soc: qcom: rmtfs: fix error handling reading qcom,vmid
of_property_count_u32_elems returns a negative integer when an error
happens , but since the value was assigned to an unsigned integer, the
check never worked correctly. Also print the correct variable in the
error print, ret isn't used here.

Fixes: e656cd0bcf ("soc: qcom: rmtfs: Optionally map RMTFS to more VMs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305-rmtfs-vmid-fix-v1-1-6a7206081602@z3ntu.xyz
2023-03-06 20:13:06 -08:00
Abel Vesa
77bf4b3ed4 soc: qcom: llcc: Fix slice configuration values for SC8280XP
The slice IDs for CVPFW, CPUSS1 and CPUWHT currently overflow the 32bit
LLCC config registers, which means it is writing beyond the upper limit
of the ATTR0_CFGn and ATTR1_CFGn range of registers. But the most obvious
impact is the fact that the mentioned slices do not get configured at all,
which will result in reduced performance. Fix that by using the slice ID
values taken from the latest LLCC SC table.

Fixes: ec69dfbdc4 ("soc: qcom: llcc: Add sc8180x and sc8280xp configurations")
Cc: stable@vger.kernel.org	# 5.19+
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306135527.509796-1-abel.vesa@linaro.org
2023-03-06 19:42:04 -08:00
Marcel Ziswiler
c083131c90 arm64: dts: freescale: add apalis imx8 aka quadmax carrier board support
The previous patch added the device tree to support Toradex Apalis
iMX8 [1] aka QuadMax a computer on module which can be used on
different carrier boards which this patch introduces.

The module consists of an NXP i.MX 8 family SoC (either i.MX 8QuadMax or
8QuadPlus), two PF8100 PMICs, a KSZ9131 Gigabit Ethernet PHY, 2, 4 or 8
GB of LPDDR4 RAM, an eMMC, an SGTL5000 analogue audio codec, an USB3503A
USB HSIC hub, an optional I2C EEPROM plus an optional Bluetooth/Wi-Fi
module.

Anything that is not self-contained on the module is disabled by
default.

The carrier board device trees contained in this patch include the
module's device tree and enable the supported peripherals of the
carrier board.

Some level of display functionality just landed upstream but requires
further integration/testing on our side. Therefore, currently only
basic console UART, eMMC and Ethernet functionality work fine.

As there is no i.MX 8QuadPlus device tree upstream those have been
dropped. However, apart from an error message during boot about it
failing to bring up the second Cortex-A72 core this boots fine on
QuadPlus' as well.

[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Marcel Ziswiler
ad0de4ceb7 arm64: dts: freescale: add initial apalis imx8 aka quadmax module support
This patch adds the device tree to support Toradex Apalis iMX8 [1] aka
QuadMax a computer on module which can be used on different carrier
boards.

The module consists of an NXP i.MX 8 family SoC (either i.MX 8QuadMax or
8QuadPlus), two PF8100 PMICs, a KSZ9131 Gigabit Ethernet PHY, 2, 4 or 8
GB of LPDDR4 RAM, an eMMC, an SGTL5000 analogue audio codec, an USB3503A
USB HSIC hub, an optional I2C EEPROM plus an optional Bluetooth/Wi-Fi
module.

Anything that is not self-contained on the module is disabled by
default.

The carrier board device trees in the next patch will include the
module's device tree and enable the supported peripherals of the
carrier board.

Some level of display functionality just landed upstream but requires
further integration/testing on our side. Therefore, currently only
basic console UART, eMMC and Ethernet functionality work fine.

As there is no i.MX 8QuadPlus device tree upstream those have been
dropped. However, apart from an error message during boot about it
failing to bring up the second Cortex-A72 core this boots fine on
QuadPlus' as well.

[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Zhou Peng
b4efce453f arm64: dts: imx8qm: add vpu decoder and encoder
Enable VPU decoder and encoder functionality.

Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Joakim Zhang
be85831de0 arm64: dts: imx8qm: add can node in devicetree
Add CAN node for imx8qm in devicetree.

Unlike on the i.MX 8QXP where the flexcan clocks are shared between
multiple CAN instances, the i.MX 8QM has separate flexcan clock slices.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Joakim Zhang
5e7d5b023e arm64: dts: imx8qxp: add flexcan in adma
Add FlexCAN decive in adma subsystem.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8XQP
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Philippe Schenker
033f5e7ef8 arm64: dts: freescale: imx8-ss-dma: set lpspi0 max frequency to 60mhz
60MHz is the maximum frequency mentioned in the datasheet for
master mode. Set that to 60MHz to match lpspi2.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Max Krummenacher
b503c3c01c arm64: dts: imx8-ss-dma: add io-channel-cells to adc nodes
This commit adds io-channel-cells property to the ADC nodes. This
property is required in order for an IIO consumer driver to work.
Especially required for Apalis iMX8 QM, as the touchscreen driver
uses ADC channels with the ADC driver based on IIO framework.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:08 +08:00
Philippe Schenker
23fa99b205 arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3
Add support for lsio_pwm0-3.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:15:07 +08:00
Marcel Ziswiler
ea6dbf86b8 dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
Add toradex,apalis-imx8 for the Apalis iMX8 aka QuadMax modules and the
carrier boards (Apalis Evaluation board as well as Ixora V1.1 and V1.2)
they may be mated in.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-07 11:14:54 +08:00
Arnd Bergmann
ced0f245ed kallsyms: add kallsyms_seqs_of_names to list of special symbols
My randconfig build setup ran into another kallsyms warning:

Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround

After adding some debugging code to kallsyms.c, I saw that the recently
added kallsyms_seqs_of_names symbol can sometimes cause the second stage
table to be slightly longer than the first stage, which makes the
build inconsistent.

Add it to the exception table that contains all other kallsyms-generated
symbols.

Fixes: 60443c88f3 ("kallsyms: Improve the performance of kallsyms_lookup_name()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-07 10:35:38 +09:00
Al Viro
c64c67c074 alpha: fix lazy-FPU mis(merged/applied/whatnot)
Looks like a braino that used to be fixed in e.g. #next.alpha
had gotten into alpha.git cherry-picked version of that patch.

Sure, alpha has no preempt, but preempt_enable() in place of
preempt_disable() is actively confusing the readers...

Other than that, the cherry-picked variant matches what I have.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-06 20:13:49 -05:00
Deepak R Varma
9228742caf drm/nouveau/hwmon: Use sysfs_emit in show function callsbacks
According to Documentation/filesystems/sysfs.rst, the show() callback
function of kobject attributes should strictly use sysfs_emit() instead
of sprintf() family functions. So, make this change.
Issue identified using the coccinelle device_attr_show.cocci script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/+pDaHOgG1x8Py2@ubun2204.myguest.virtualbox.org
2023-03-06 19:42:50 -05:00
Sukrut Bellary
e1e17d7deb kselftest: amd-pstate: Fix spelling mistakes
Fix spelling mistakes in run.sh "drvier" => "driver" and
in gitsource.sh "senconds" => "seconds".

Signed-off-by: Sukrut Bellary <sukrut.bellary@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-06 17:13:33 -07:00
Geert Uytterhoeven
60684c2bd3 kunit: tool: Add support for m68k under QEMU
Add basic support to run m68k under QEMU via kunit_tool.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-06 17:11:45 -07:00
Guillaume Tucker
2da789cda4 selftests: amd-pstate: fix TEST_FILES
Bring back the Python scripts that were initially added with
TEST_GEN_FILES but now with TEST_FILES to avoid having them deleted
when doing a clean.  Also fix the way the architecture is being
determined as they should also be installed when ARCH=x86_64 is
provided explicitly.  Then also append extra files to TEST_FILES and
TEST_PROGS with += so they don't get discarded.

Fixes: ba2d788aa8 ("selftests: amd-pstate: Trigger tbench benchmark and test cpus")
Fixes: a49fb7218e ("selftests: amd-pstate: Don't delete source files via Makefile")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-06 17:03:20 -07:00
Palmer Dabbelt
e18048da9b
RISC-V: Stop emitting attributes
The RISC-V ELF attributes don't contain any useful information.  New
toolchains ignore them, but they frequently trip up various older/mixed
toolchains.  So just turn them off.

Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230223224605.6995-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06 15:55:25 -08:00
Jonathan Neuschäfer
6906598f1c zstd: Fix definition of assert()
assert(x) should emit a warning if x is false. WARN_ON(x) emits a
warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x)
rather than WARN_ON(x).

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Nick Terrell <terrelln@fb.com>
2023-03-06 15:54:54 -08:00
Nick Terrell
038505c41f lib: zstd: Backport fix for in-place decompression
Backport the relevant part of upstream commit 5b266196 [0].

This fixes in-place decompression for x86-64 kernel decompression. It
uses a bound of 131072 + (uncompressed_size >> 8), which can be violated
after upstream commit 6a7ede3d [1], as zstd can use part of the output
buffer as temporary storage, and without this patch needs a bound of
~262144.

The fix is for zstd to detect that the input and output buffers overlap,
so that zstd knows it can't use the overlapping portion of the output
buffer as tempoary storage. If the margin is not large enough, this will
ensure that zstd will fail the decompression, rather than overwriting
part of the input data, and causing corruption.

This fix has been landed upstream and is in release v1.5.4. That commit
also adds unit and fuzz tests to verify that the margin we use is
respected, and correct. That means that the fix is well tested upstream.

I have not been able to reproduce the potential bug in x86-64 kernel
decompression locally, nor have I recieved reports of failures to
decompress the kernel. It is possible that compression saves enough
space to make it very hard for the issue to appear.

I've boot tested the zstd compressed kernel on x86-64 and i386 with this
patch, which uses in-place decompression, and sanity tested zstd compression
in btrfs / squashfs to make sure that we don't see any issues, but other
uses of zstd shouldn't be affected, because they don't use in-place
decompression.

Thanks to Vasily Gorbik <gor@linux.ibm.com> for debugging a related issue
on s390, which was triggered by the same commit, but was a bug in how
__decompress() was called [2]. And to Sasha Levin <sashal@kernel.org>
for the CC alerting me of the issue.

[0] 5b266196a4
[1] 6a7ede3dfc
[2] https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours

CC: Vasily Gorbik <gor@linux.ibm.com>
CC: Heiko Carstens <hca@linux.ibm.com>
CC: Sasha Levin <sashal@kernel.org>
CC: Yann Collet <cyan@fb.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>
2023-03-06 15:51:44 -08:00
Kees Cook
780f6a9afe lib: zstd: Fix -Wstringop-overflow warning
Fix the following -Wstringop-overflow warning when building with GCC 11+:

lib/zstd/decompress/huf_decompress.c: In function ‘HUF_readDTableX2_wksp’:
lib/zstd/decompress/huf_decompress.c:700:5: warning: ‘HUF_fillDTableX2.constprop’ accessing 624 bytes in a region of size 52 [-Wstringop-overflow=]
  700 |     HUF_fillDTableX2(dt, maxTableLog,
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  701 |                    wksp->sortedSymbol, sizeOfSort,
      |                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  702 |                    wksp->rankStart0, wksp->rankVal, maxW,
      |                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  703 |                    tableLog+1,
      |                    ~~~~~~~~~~~
  704 |                    wksp->calleeWksp, sizeof(wksp->calleeWksp) / sizeof(U32));
      |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/zstd/decompress/huf_decompress.c:700:5: note: referencing argument 6 of type ‘U32 (*)[13]’ {aka ‘unsigned int (*)[13]’}
lib/zstd/decompress/huf_decompress.c:571:13: note: in a call to function ‘HUF_fillDTableX2.constprop’
  571 | static void HUF_fillDTableX2(HUF_DEltX2* DTable, const U32 targetLog,
      |             ^~~~~~~~~~~~~~~~

by using pointer notation instead of array notation.

This is one of the last remaining warnings to be fixed before globally
enabling -Wstringop-overflow.

Co-developed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
2023-03-06 15:51:44 -08:00
Josh Poimboeuf
6c0f2d071e loongarch/cpu: Mark play_dead() __noreturn
play_dead() doesn't return.  Annotate it as such.  By extension this
also makes arch_cpu_idle_dead() noreturn.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/4da55acfdec8a9132c4e21ffb7edb1f846841193.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:06 -08:00
Josh Poimboeuf
13bf7923a4 loongarch/cpu: Make sure play_dead() doesn't return
play_dead() doesn't return.  Make that more explicit with a BUG().

BUG() is preferable to unreachable() because BUG() is a more explicit
failure mode and avoids undefined behavior like falling off the edge of
the function into whatever code happens to be next.

Link: https://lore.kernel.org/r/21245d687ffeda34dbcf04961a2df3724f04f7c8.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:06 -08:00
Josh Poimboeuf
93c0edffbc ia64/cpu: Mark play_dead() __noreturn
play_dead() doesn't return.  Annotate it as such.  By extension this
also makes arch_cpu_idle_dead() noreturn.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/7575bb38417bd8bcb5be980443f99cab29319342.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:05 -08:00
Josh Poimboeuf
1b2442a835 csky/cpu: Make sure arch_cpu_idle_dead() doesn't return
arch_cpu_idle_dead() doesn't return.  Make that more explicit with a
BUG().

BUG() is preferable to unreachable() because BUG() is a more explicit
failure mode and avoids undefined behavior like falling off the edge of
the function into whatever code happens to be next.

Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/1e9ecc3d248e82973e80bc336fc9f97e3ba2708d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:05 -08:00
Josh Poimboeuf
9bdc61ef27 arm64/cpu: Mark cpu_die() __noreturn
cpu_die() doesn't return.  Annotate it as such.  By extension this also
makes arch_cpu_idle_dead() noreturn.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lkml.kernel.org/r/20230216184157.4hup6y6mmspr2kll@treble
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:04 -08:00
Josh Poimboeuf
b40c7d6d31 arm/cpu: Add unreachable() to arch_cpu_idle_dead()
arch_cpu_idle_dead() doesn't return.  Make that visible to the compiler
with an unreachable() code annotation.

Link: https://lkml.kernel.org/r/20230216183851.s5bnvniomq44rytu@treble
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:04 -08:00
Josh Poimboeuf
550db6795e alpha/cpu: Make sure arch_cpu_idle_dead() doesn't return
arch_cpu_idle_dead() doesn't return.  Make that more explicit with a
BUG().

BUG() is preferable to unreachable() because BUG() is a more explicit
failure mode and avoids undefined behavior like falling off the edge of
the function into whatever code happens to be next.

Link: https://lore.kernel.org/r/19ffef09a175fecb783abcd44d6bcfeade2857eb.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:03 -08:00
Josh Poimboeuf
1e8a0be5ed alpha/cpu: Expose arch_cpu_idle_dead()'s prototype declaration
Include <linux/cpu.h> to make sure arch_cpu_idle_dead() matches its
prototype going forward.

Link: https://lore.kernel.org/r/b0405c2ac5686303b6026e1ac27cfd769b21a7d0.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:03 -08:00
Shin'ichiro Kawasaki
288b3271d9 scsi: sd: Fix wrong zone_write_granularity value during revalidate
When the sd driver revalidates host-managed SMR disks, it calls
disk_set_zoned() which changes the zone_write_granularity attribute value
to the logical block size regardless of the device type. After that, the sd
driver overwrites the value in sd_zbc_read_zone() with the physical block
size, since ZBC/ZAC requires this for host-managed disks. Between the calls
to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the
attribute shows the logical block size as the zone_write_granularity value,
which is wrong for host-managed disks. The duration of the window is from
20ms to 200ms, depending on report zone command execution time.

To avoid the wrong zone_write_granularity value between disk_set_zoned()
and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but
just after disk_set_zoned() call.

Fixes: a805a4fa4f ("block: introduce zone_write_granularity limit")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06 18:33:13 -05:00
Michael Kelley
11d9874c42 scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a
virtual disk.  The VHD/VHDX file format is a sparse format where real disk
space on the host is assigned in chunks that the VHD/VHDX file format calls
the BlockSize.  This BlockSize is not to be confused with the 512-byte (or
4096-byte) sector size of the underlying storage device.  The default block
size for a new VHD/VHDX file is 32 Mbytes.  When a guest VM touches any
disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates
32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly,
if a discard operation is done that covers an entire 32 Mbyte chunk,
Hyper-V will free the real disk space for that portion of the VHD/VHDX.
This BlockSize is surfaced in Linux as the "discard_granularity" in
/sys/block/sd<x>/queue, which makes sense.

Hyper-V also has differencing disks that can overlay a VHD/VHDX file to
capture changes to the VHD/VHDX while preserving the original VHD/VHDX.
One example of this differencing functionality is for VM snapshots.  When a
snapshot is created, a differencing disk is created.  If the snapshot is
rolled back, Hyper-V can just delete the differencing disk, and the VM will
see the original disk contents at the time the snapshot was taken.
Differencing disks are used in other scenarios as well.

The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes.
The smaller default is used because changes to differencing disks are
typically scattered all over, and Hyper-V doesn't want to allocate 32
Mbytes of real disk space for a stray write here or there.  The smaller
BlockSize provides more efficient use of real disk space.

When a differencing disk is added to a VHD/VHDX, Hyper-V reports
UNIT_ATTENTION with a sense code indicating "Operating parameters have
changed", because the value of discard_granularity should be changed to 2
Mbytes. When the differencing disk is removed, discard_granularity should
be changed back to 32 Mbytes.  However, current code simply reports a
message from scsi_report_sense() and the value of
/sys/block/sd<x>/queue/discard_granularity is not updated. The message
isn't very actionable by a sysadmin.

Fix this by having the storvsc driver check for the sense code indicating
that the underly VHD/VHDX block size has changed, and do a rescan of the
device to pick up the new discard_granularity.  With this change the entire
transition to/from differencing disks is handled automatically and
transparently, with no confusing messages being output.

Link: https://lore.kernel.org/r/1677516514-86060-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06 18:33:13 -05:00
Chandrakanth Patil
a2033f9f9d scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
Update driver version.

Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06 18:33:13 -05:00
Chandrakanth Patil
9bcb1d5a3d scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
In kdump kernel mode, the driver works in reduced functionality mode with
some features disabled such as reduced MSI-X count and RDPQ disabled, etc.
However, the firmware is not aware of this mode in some cases, which
results in undefined behavior.

To address this, the driver informs the firmware about the kdump mode
through MPI capabilities bit during driver initialization.  This allows
firmware to adjust its behavior accordingly.

Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06 18:33:13 -05:00
Chandrakanth Patil
bfa659177d scsi: megaraid_sas: Update max supported LD IDs to 240
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.

To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.

Fixes: ae6874ba4b ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06 18:33:13 -05:00
Ranjan Kumar
8e45183978 scsi: mpi3mr: Bad drive in topology results kernel crash
When the SAS Transport Layer support is enabled and a device exposed to
the OS by the driver fails INQUIRY commands, the driver frees up the memory
allocated for an internal HBA port data structure. However, in some places,
the reference to the freed memory is not cleared. When the firmware sends
the Device Info change event for the same device again, the freed memory is
accessed and that leads to memory corruption and OS crash.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06 18:33:13 -05:00