[WHY]
Adding 1920x1080 as fail safe mode for
Video Format Fall Back Policy.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
udelay should not be used for long waits since it keeps CPU active,
wasting power.
[HOW]
Use fsleep where acceptable to allow CPU cores to be parked by the scheduler.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Needs to set the default value of the LTTPR timeout after resume.
[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
‘ring’ set but not used [-Werror=unused-but-set-variable]
81 | struct amdgpu_ring *ring;
| ^~~~
ring is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Format the input and output CSC matrix so they
look like 3x4 matrixes. This will make parsing them
much easier and allows us to quickly spot potential
mistakes.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the snappily named Kukui Jacuzzi SKU16 Chromebook
on KernelCI. There are more issues flagged, this is just what I fixed
thus far.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
To start capture on Microchip PDMC the enable bits for each supported
microphone need to be set. After this bit is set the PDMC starts to
receive data from microphones and it considers this data as valid data.
Thus if microphones are not ready the PDMC captures anyway data from its
lines. This data is interpreted by the human ear as poc noises.
To avoid this the following software workaround need to be applied when
starting capture:
1/ enable PDMC channel
2/ wait 150ms
3/ execute 16 dummy reads from RHR
4/ clear interrupts
5/ enable interrupts
6/ enable DMA channel
For this workaround to work step 6 need to be executed at the end.
For step 6 was added patch 1/3 from this series. With this, component
DAI driver sets its struct snd_soc_component_driver::start_dma_last = 1
and proper action is taken based on this flag when starting DAI trigger
vs DMA.
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the snappily named Kukui Jacuzzi SKU16 Chromebook
on KernelCI. There are more issues flagged, this is just what I fixed
thus far.
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the Spherion Chromebook on KernelCI. There are
more issues flagged, this is just what I fixed thus far - the volume
controls on the MT6359 have issues for example, and a lot of controls
aren't marked as Switches like they should be.
[Changes from V4:
- s/regs:16/regs:8 in figure.]
[Changes from V3:
- Back to src_reg and dst_reg, since they denote register numbers
as opposed to the values stored in these registers.]
[Changes from V2:
- Use src and dst consistently in the document.
- Use a more graphical depiction of the 128-bit instruction.
- Remove `Where:' fragment.
- Clarify that unused bits are reserved and shall be zeroed.]
[Changes from V1:
- Use rst literal blocks for figures.
- Avoid using | in the basic instruction/pseudo instruction figure.
- Rebased to today's bpf-next master branch.]
This patch modifies instruction-set.rst so it documents the encoding
of BPF instructions in terms of how the bytes are stored (be it in an
ELF file or as bytes in a memory buffer to be loaded into the kernel
or some other BPF consumer) as opposed to how the instruction looks
like once loaded.
This is hopefully easier to understand by implementors looking to
generate and/or consume bytes conforming BPF instructions.
The patch also clarifies that the unused bytes in a pseudo-instruction
shall be cleared with zeros.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/87h6v6i0da.fsf_-_@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session().
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This rather small set of changes includes some minor fixes and
improvements. The AB8500 driver gained support for reading the initial
hardware state and the Synopsys DesignWare driver received some work to
prepare for device tree and platform support.
-----BEGIN PGP SIGNATURE-----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=PQhV
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This rather small set of changes includes some minor fixes and
improvements.
The AB8500 driver gained support for reading the initial hardware
state and the Synopsys DesignWare driver received some work to prepare
for device tree and platform support"
* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: dwc: Use devm_pwmchip_add()
pwm: dwc: Move memory allocation to own function
pwm: dwc: Change &pci->dev to dev in probe
dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
pwm: ab8500: Implement .get_state()
pwm: ab8500: Fix calculation of duty and period
pwm: lp3943: Drop unused i2c include
dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
pwm: stm32-lp: fix the check on arr and cmp registers update
pwm: Move pwm_capture() dummy to restore order
pwm: sifive: Always let the first pwm_apply_state succeed
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmP9gYkACgkQ8vlZVpUN
gaNN0AgAqwS873C9QX7QQK8tE+VvKT7iteNaJ68c/CMymSP7o5RdalbQRiAsSy/Q
88PjBFVFQOsIa1d7OAUr50RHQODjOuOz6SJpitKKPnVC89gAzDt7Pk1AQzABjR37
GY7nneHTQs6fGXLMUz/SlsU+7a08Bz5BeAxVBQxzkRL6D28/sbpT6Iw1tDhUUsug
0o3kz/RolEopCzjhmH/Fpxt5RlBnTya5yX8IgmfEV3y7CfQ+XcTWgRebqDXxVCBE
/VCZOl2cv5n4PFlRH8eUihmyO5iu7p9W9ro6HbLEuxQXwcRNY7skONidceim2EYh
KzWZt59/JAs0DyvRWqZ9irtPDkuYqA==
=OIYo
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improve performance for ext4 by allowing multiple process to perform
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix incorrect options show of original mount_opt and extend mount_opt2
ext4: Fix possible corruption when moving a directory
ext4: init error handle resource before init group descriptors
ext4: fix task hung in ext4_xattr_delete_inode
jbd2: fix data missing when reusing bh which is ready to be checkpointed
ext4: update s_journal_inum if it changes after journal replay
ext4: fail ext4_iget if special inode unallocated
ext4: fix function prototype mismatch for ext4_feat_ktype
ext4: remove unnecessary variable initialization
ext4: fix inode tree inconsistency caused by ENOMEM
ext4: refuse to create ea block when umounted
ext4: optimize ea_inode block expansion
ext4: remove dead code in updating backup sb
ext4: dio take shared inode lock when overwriting preallocated blocks
ext4: don't show commit interval if it is zero
ext4: use ext4_fc_tl_mem in fast-commit replay path
ext4: improve xattr consistency checking and error reporting
In commit 332ea1f697 ("bpf: Add bpf_cgroup_from_id() kfunc"), a new
bpf_cgroup_from_id() kfunc was added which allows a BPF program to
lookup and acquire a reference to a cgroup from a cgroup id. The
commit's doxygen comment seems to have copy-pasted fields, which causes
BPF kfunc helper documentation to fail to render:
<snip>/helpers.c:2114: warning: Excess function parameter 'cgrp'...
<snip>/helpers.c:2114: warning: Excess function parameter 'level'...
<snip>
<snip>/helpers.c:2114: warning: Excess function parameter 'level'...
This patch fixes the doxygen header.
Fixes: 332ea1f697 ("bpf: Add bpf_cgroup_from_id() kfunc")
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230228152845.294695-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adapt the suggestions for the assembly string functions that Andrew
suggested but that I didn't manage to include into the series that
got applied.
This includes improvements to two comments, removal of unneeded labels
and moving one instruction slightly higher to contradict an
explanatory comment.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230208225328.1636017-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts commit 67b7836d44.
The locking appears incomplete. A caller of SHMEM helper's pin
function never acquires the dma-buf reservation lock. So we get
WARNING: CPU: 3 PID: 967 at drivers/gpu/drm/drm_gem_shmem_helper.c:243 drm_gem_shmem_pin+0x42/0x90 [drm_shmem_helper]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228152612.19971-1-tzimmermann@suse.de
Without gpiolib, this driver fails to link:
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `chip_gpio_get':
zl38060.c:(.text+0x30): undefined reference to `gpiochip_get_data'
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `zl38_spi_probe':
zl38060.c:(.text+0xa18): undefined reference to `devm_gpiochip_add_data_with_key'
This appears to have been in the driver since the start, but is hard to
hit in randconfig testing since gpiolib is almost always selected by something
else.
Fixes: 52e8a94baf ("ASoC: Add initial ZL38060 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230227085850.2503725-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Without modification the AT91SAM9G20-EK has no capture support, none of the
inputs of the CODEC are wired to anything to useful and there are no paths
supporting loopback. Since the audio is clocked from the CODEC and the DAPM
inputs are marked as unusable this means that capture will fail to transfer
any data as the ADC path can't be powered up.
Flag this in the device description so apps don't see unusable capture
support, guarded with the existing optional define for mic input.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230225-asoc-sam9g20ek-v1-1-9baeb4893142@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sidetone_Positive_Gain_dB control reports a range of 0..100 as valid
but the put() function rejects anything larger than 24. Fix this.
There are numerous other problems with this control, the name is very non
idiomatic and it should be a TLV, but it's ABI so probably we should leave
those alone.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-4-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reporting an error on invalid values is optional but helpful to userspace
so do so.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-3-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls put() operations should return 1 if the value changed and 0
if it remains the same, fix the mt8192 driver to do so.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-2-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a lot of info level log messages in the mt8192 ADDA driver which
are trivially triggerable from userspace, many in normal operation. Remove
these to avoid spamming the console.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-asoc-mt8192-quick-fixes-v1-1-9a85f90368e1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Microchip PDMC IP doesn't filter microphone noises on startup. By default,
it captures data received from digital microphones after
the MCHP_PDMC_MR.EN bits are set. Thus when enable is set on PDMC side the
digital microphones might not be ready yet and PDMC captures data from then
in this time. This data captured is poc noise. To avoid this the software
workaround is to the following:
1/ enable PDMC channel
2/ wait 150ms (on SAMA7G5-EK setup)
3/ execute 16 dummy reads from RHR
4/ clear interrupts
5/ enable interrupts
6/ enable DMA channel
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230228110145.3770525-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PDMC can work with different types of microphones, thus different boards
could have different microphones. Depending on microphone type the PDMC
would need to wait longer or shorter period (at startup) than the default
chosen one to filter unwanted noise. Thus add microchip,startup-delay-us
binding to let PDMC users to specify startup delay.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230228110145.3770525-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add option to start DMA component after DAI trigger. This is done
by filling the new struct snd_soc_component_driver::start_dma_last.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230228110145.3770525-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA control put() operations should return 0 if the value changed so that
events can be generated appropriately for userspace but the custom control
in the MT8183 I2S DAI driver doesn't do that, fix it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt8183-quick-fixes-v1-2-041f29419ed5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a lot of dev_info() logging in normal operation in the I2S DAI
driver, remove it to avoid spamming the console.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt8183-quick-fixes-v1-1-041f29419ed5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The HPx Mux enumerations define values 5, 6 and 7 but describe them as
"undefined" and map them to the value 0 on writing. Given the descriptions
and behaviour it seems that these values are invalid and should not be
present in the register, the current behaviour is detected as problematic
by mixer-test:
# # HPL Mux.0 expected 5 but read 0, is_volatile 0
# # HPL Mux.0 expected 6 but read 0, is_volatile 0
# # HPL Mux.0 expected 7 but read 0, is_volatile 0
Remove the values from the enumeration, this will prevent userspace setting
them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-3-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the Wake on Voice 2 control accepts and stores any value written
but it reports that only 0 and 1 are valid values. Reject any out of range
values written by userspace.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-2-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA control put() operations should return 0 if the value changed so that
events can be generated appropriately for userspace but the custom control
for wake on voice stage 2 doesn't do this, fix it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-1-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For R4000 erratas around multiplication and division instructions,
as our use of those instructions are always followed by mflo/mfhi
instructions, the only issue we need care is
"MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0" Errata 28:
"A double-word or a variable shift may give an incorrect result if
executed while an integer multiplication is in progress."
We just emit a mfhi $0 to ensure the operation is completed after
every multiplication instruction according to workaround suggestion
in the document.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-3-jiaxun.yang@flygoat.com
For DADDI errata we just workaround by disable immediate operation
for BPF_ADD / BPF_SUB to avoid generation of DADDIU.
All other use cases in JIT won't cause overflow thus they are all safe.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com
The kernel always logs the unique subsystem name for a discovery
controller, even in the case user space asked for the well known.
This has lead to confusion as the logs of nvme-cli and the kernel
logs didn't match.
First, nvme-cli connects to the well known discovery controller to
figure out if it supports TP8013. If so then nvme-cli disconnects and
connects to the unique discovery controller. Currently, the kernel show
that user space connected twice to the unique one.
To avoid further confusion, show the well known discovery controller if
user space asked for it:
$ nvme connect-all -v -t tcp -a 192.168.0.1
nvme0: nqn.2014-08.org.nvmexpress.discovery connected
nvme0: nqn.2014-08.org.nvmexpress.discovery disconnected
nvme0: nqn.discovery connected
kernel log:
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.0.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
nvme nvme0: new ctrl: NQN "nqn.discovery", addr 192.168.0.1:8009
Fixes: e5ea42faa7 ("nvme: display correct subsystem NQN")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.
During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: 02c57a82c0 ("nvme-tcp: print actual source IP address through sysfs "address" attr")
Reviewed-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This function was transitioned from returning NVMe status codes to
returning traditional kernel error codes. However, this particular
return now accidentally returns positive error codes like ENOMEM instead
of negative -ENOMEM.
Fixes: b0ef1b11d3 ("nvme-auth: don't use NVMe status codes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Bring back the check of the Identify Namespace return value for the
legacy NVMe 1.0-style sequential scanning. While NVMe 1.0 does not
support namespace management, there are "modern" cloud solutions like
Google Cloud Platform that claim the obsolete 1.0 compliance for no
good reason while supporting proprietary sideband namespace management.
Fixes: 1a893c2bfe ("nvme: refactor namespace probing")
Reported-by: Nils Hanke <nh@edgeless.systems>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Nils Hanke <nh@edgeless.systems>
Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]
Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2
Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.
While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.
io_issue_sqe
|-io_assign_file // do fget() first
|-io_read
|-io_iter_do_read
|-ocfs2_file_read_iter // return -EOPNOTSUPP
|-kiocb_done
|-io_rw_done
|-__io_complete_rw_common // set REQ_F_REISSUE
|-io_resubmit_prep
|-io_req_prep_async // override req->file, leak happens
This was introduced by commit a196c78b54 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.
[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t
Fixes: a196c78b54 ("io_uring: assign non-fixed early for async work")
Cc: <stable@vger.kernel.org>
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228045459.13524-1-joseph.qi@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current kernel (d2980d8d82) crashes
when blk_iocost_init for `nvme1` disk.
BUG: kernel NULL pointer dereference, address: 0000000000000050
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
blk_iocost_init (include/asm-generic/qspinlock.h:128
include/linux/spinlock.h:203
include/linux/spinlock_api_smp.h:158
include/linux/spinlock.h:400
block/blk-iocost.c:2884)
ioc_qos_write (block/blk-iocost.c:3198)
? kretprobe_perf_func (kernel/trace/trace_kprobe.c:1566)
? kernfs_fop_write_iter (include/linux/slab.h:584 fs/kernfs/file.c:311)
? __kmem_cache_alloc_node (mm/slab.h:? mm/slub.c:3452 mm/slub.c:3491)
? _copy_from_iter (arch/x86/include/asm/uaccess_64.h:46
arch/x86/include/asm/uaccess_64.h:52
lib/iov_iter.c:183 lib/iov_iter.c:628)
? kretprobe_dispatcher (kernel/trace/trace_kprobe.c:1693)
cgroup_file_write (kernel/cgroup/cgroup.c:4061)
kernfs_fop_write_iter (fs/kernfs/file.c:334)
vfs_write (include/linux/fs.h:1849 fs/read_write.c:491
fs/read_write.c:584)
ksys_write (fs/read_write.c:637)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
This happens because ioc_refresh_params() is being called without
a properly initialized ioc->rqos, which is happening later in the callee
side.
ioc_refresh_params() -> ioc_autop_idx() tries to access
ioc->rqos.disk->queue but ioc->rqos.disk is NULL, causing the BUG above.
Create function, called ioc_refresh_params_disk(), that is similar to
ioc_refresh_params() but where the "struct gendisk" could be passed as
an explicit argument. This function will be called when ioc->rqos.disk
is not initialized.
Fixes: ce57b55860 ("blk-rq-qos: make rq_qos_add and rq_qos_del more useful")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230228111654.1778120-1-leitao@debian.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Produce arch/s390/boot/vmlinux.map link map for the decompressor, when
CONFIG_VMLINUX_MAP option is enabled.
Link map is quite useful during making kernel changes related to how
the decompressor is composed and debugging linker scripts.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Clear CPU state (e.g. all TLB entries, prefetched instructions, etc.)
of the target CPU, however without clearing register contents before
starting any work on it.
This puts the target CPU in a more defined state compared to the
current Stop + Restart sigp orders.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If a machine check interrupt hits while user process is
running __s390_handle_mcck() helper function is called
directly from the interrupt handler and terminates the
current process by calling make_task_dead() routine.
The make_task_dead() is not allowed to be called from
interrupt context which forces the machine check handler
switch to the kernel stack and enable local interrupts
first.
The __s390_handle_mcck() could also be called to service
pending work, but this time from the external interrupts
handler. It is the machine check handler that establishes
the work and schedules the external interrupt, therefore
the machine check interrupt itself should be disabled
while reading out the corresponding variable:
local_mcck_disable();
mcck = *this_cpu_ptr(&cpu_mcck);
memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
local_mcck_enable();
However, local_mcck_disable() does not have effect when
__s390_handle_mcck() is called directly form the machine
check handler, since the machine check interrupt is still
disabled. Therefore, it is not the opening bracket to the
following local_mcck_enable() function.
Simplify the user process termination flow by scheduling
the external interrupt and killing the affected process
from the interrupt context.
Assume a kernel-generated signal is always delivered and
ignore a value returned by do_send_sig_info() funciton.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>