Commit graph

1,185,212 commits

Author SHA1 Message Date
Harshit Mogalapalli
8fcf2d012c ubi: block: Fix a possible use-after-free bug in ubiblock_create()
Smatch warns:
	drivers/mtd/ubi/block.c:438 ubiblock_create()
	warn: '&dev->list' not removed from list

'dev' is freed in 'out_free_dev:, but it is still on the list.

To fix this, delete the list item before freeing.

Fixes: 91cc8fbcc8 ("ubi: block: set BLK_MQ_F_BLOCKING")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2023-02-14 15:17:55 +01:00
Andy Chi
9251584af0 ALSA: hda/realtek: Enable mute/micmute LEDs and speaker support for HP Laptops
On HP Laptops, requires the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make its audio LEDs and speaker work.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214140432.39654-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-14 15:07:28 +01:00
Stefan Binding
5791c7699f ALSA: hda: cs35l41: Enable Amp High Pass Filter
This helps smooth out pops and clicks in the amps.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-14 15:06:14 +01:00
Stefan Binding
cd40dad2ca ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
To ensure firmware for cs35l41 is correctly running, it is necessary
that a corresponding tuning file is also loaded. Without both,
the firmware may not be performing correctly
Ensure that if we load the firmware, we have also loaded the correct
tuning file. Otherwise, fall back to default firmware and tuning.
If default tuning is also missing, then disable DSP firmware.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-14 15:06:13 +01:00
Vitaly Rodionov
943f4e64ee ALSA: hda: cs35l41: Correct error condition handling
Function cs_dsp_coeff_write_ctrl() can return 3 possible values:
0 - no change, 1 - value has changed and -1 - error, so positive value
is not an error.
Fixes: 7406bdbc4f ("ASoC: wm_adsp: Return whether changed when writing controls")

Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-14 15:06:13 +01:00
Manivannan Sadhasivam
6f098cde9d cpufreq: qcom-hw: Add missing null pointer check
of_device_get_match_data() may return NULL, so add a check to prevent
potential null pointer dereference.

Issue reported by Qualcomm's internal static analysis tool.

Fixes: 4f7961706c ("cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-14 15:06:10 +01:00
Vinod Koul
4315eab705 phy: fixes for 6.2
Fixes in drivers for:
  - Binding fix for g12a phys
  - Kconfig operator precedence for TI driver
  - renesas: register setting
  - sunplus: null deref fix
  - rockchip-inno fix for clk_disable_unprepare()
  - MDM9607 init sequence revert due to regression
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmPKqp8ACgkQfBQHDyUj
 g0c8QxAAlT17OSekO44/4j1ZPc1c0fvgf0CEDE6xrcfoD7taByuvFK7gm2NGYSaT
 5RNYDniiMBDgchxHvy4BoEAXqrTbGLC6uFBlZ3BcEMM9ONFSU5t/J7YK0gH1WdSq
 15Bp491XhWGVr3KlqAxgtatv7qgi0JS/mRmjXnN5ytIxETCqzPWwWvMtMRudQFTy
 g3pydR1j4bTu/9yhBWfw6OIOnPVRTTmiEaqxUmahTCRld9YWvPLLJCCllZIh3YKS
 kDF3UKDP0nRTPH7LqPlZtnOFdM0yq8lU8Wzt4Y+QVzTUr2OZ7+hCK03c/kVIA/5e
 5tRValarw5hpZ0BfRAqhRIFFkh6K7ImqlMuuduZnDG8v/m7XKse7y2HaVOn9wDY8
 l4FgrzJxSbfQzyPk3JYds+9tQezM1IGAc0FxarqY99NYMwHbqAHPs+W/Ft2tRY3W
 ncG5j9YcGAdIZ/qa9/rY1Qdm9UOkzba9/bsi6ahQcW6QmtrmTtKgs2SKTpGOEnly
 qwjmjKynVByZ8Kf3310lmhHm8TPs/vN0SAKbzh0VLacAcYmJMV9bN/E/DLzttkKP
 lFx0GZ1WdyIlQaT/pXMGBPM2fux9oyNIKDn6sRmfe6ybx+I3e1UrHtgJa9HoyJet
 iJQibehGdM+o+RP12lO97IsvzN1qHhfPkN144r/PZwK95UJsWDM=
 =MDsZ
 -----END PGP SIGNATURE-----

Merge tag 'phy-fixes-6.2' into next

Merge fixes tag pulled into mainline by Linus into phy/next due to
dependency on amlogic patches
2023-02-14 19:25:45 +05:30
Neill Kapron
4ca651df07 phy: rockchip-typec: fix tcphy_get_mode error case
The existing logic in tcphy_get_mode() can cause the phy to be
incorrectly configured to USB UFP or DisplayPort mode when
extcon_get_state returns an error code.

extcon_get_state() can return 0, 1, or a negative error code.

It is possible to get into the failing state with an extcon driver
which does not support the extcon connector id specified as the
second argument to extcon_get_state().

tcphy_get_mode()
->extcon_get_state()
-->find_cable_index_by_id()
--->return -EINVAL;

Fixes: e96be45cb8 ("phy: Add USB Type-C PHY driver for rk3399")
Signed-off-by: Neill Kapron <nkapron@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-14 19:25:28 +05:30
Gilad Itzkovitch
e6f5dcb7ec wifi: mac80211: Fix for Rx fragmented action frames
The ieee80211_accept_frame() function performs a number of early checks
to decide whether or not further processing needs to be done on a frame.
One of those checks is the ieee80211_is_robust_mgmt_frame() function.
It requires to peek into the frame payload, but because defragmentation
does not occur until later on in the receive path, this peek is invalid
for any fragment other than the first one. Also, in this scenario there
is no STA and so the fragmented frame will be dropped later on in the
process and will not reach the upper stack. This can happen with large
action frames at low rates, for example, we see issues with DPP on S1G.

This change will only check if the frame is robust if it's the first
fragment. Invalid fragmented packets will be discarded later after
defragmentation is completed.

Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Link: https://lore.kernel.org/r/20221124005336.1618411-1-gilad.itzkovitch@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 14:48:25 +01:00
Arnd Bergmann
1d8d4af434 wifi: mac80211: avoid u32_encode_bits() warning
gcc-9 triggers a false-postive warning in ieee80211_mlo_multicast_tx()
for u32_encode_bits(ffs(links) - 1, ...), since ffs() can return zero
on an empty bitmask, and the negative argument to u32_encode_bits()
is then out of range:

In file included from include/linux/ieee80211.h:21,
                 from include/net/cfg80211.h:23,
                 from net/mac80211/tx.c:23:
In function 'u32_encode_bits',
    inlined from 'ieee80211_mlo_multicast_tx' at net/mac80211/tx.c:4437:17,
    inlined from 'ieee80211_subif_start_xmit' at net/mac80211/tx.c:4485:3:
include/linux/bitfield.h:177:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask
  177 |   __field_overflow();     \
      |   ^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:197:2: note: in expansion of macro '____MAKE_OP'
  197 |  ____MAKE_OP(u##size,u##size,,)
      |  ^~~~~~~~~~~
include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP'
  200 | __MAKE_OP(32)
      | ^~~~~~~~~

Newer compiler versions do not cause problems with the zero argument
because they do not consider this a __builtin_constant_p().
It's also harmless since the hweight16() check already guarantees
that this cannot be 0.

Replace the ffs() with an equivalent find_first_bit() check that
matches the later for_each_set_bit() style and avoids the warning.

Fixes: 963d0e8d08 ("wifi: mac80211: optionally implement MLO multicast TX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214132025.1532147-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 14:44:13 +01:00
Prashanth K
5ec63fdbca usb: gadget: u_serial: Add null pointer check in gserial_resume
Consider a case where gserial_disconnect has already cleared
gser->ioport. And if a wakeup interrupt triggers afterwards,
gserial_resume gets called, which will lead to accessing of
gser->ioport and thus causing null pointer dereference.Add
a null pointer check to prevent this.

Added a static spinlock to prevent gser->ioport from becoming
null after the newly added check.

Fixes: aba3a8d01d ("usb: gadget: u_serial: add suspend resume callbacks")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1676309438-14922-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-14 14:41:32 +01:00
Yang Yingliang
7ebb605d22 usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
If kstrtou8() fails, the mutex_unlock() is missed, move kstrtou8()
before mutex_lock() to fix it up.

Fixes: 0525210c98 ("usb: gadget: uvc: Allow definition of XUs in configfs")
Fixes: b3c839bd8a ("usb: gadget: uvc: Make bSourceID read/write")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230213070926.776447-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-14 14:41:24 +01:00
Alain Volmat
7ec844a2c7
spi: spi-st-ssc: convert to DT schema
Convert spi-st-ssc.txt into st,ssc-spi.yaml for the
ST Microelectronics SSC SPI driver.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230213192349.17101-1-avolmat@me.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:31:45 +00:00
Christophe JAILLET
9d77522b45
spi: Reorder fields in 'struct spi_transfer'
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size from 144 to 128 bytes.

Turn 'timestamped' into a bitfield so that it can be easily merged with
some other bifields and move 'error'.

This should have no real impact on memory allocation because 'struct
spi_transfer' is mostly used on stack, but it can save a few cycles
when the structure is initialized or copied.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/93a051da85a895bc6003aedfb00a13e1c2fc6338.1676370870.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:27:58 +00:00
Dhruva Gole
d403fb6e76
spi: cadence-quadspi: use STIG mode for small reads
Fix the issue where some flash chips like cypress S25HS256T return the
value of the same register over and over in DAC mode.

For example in the TI K3-AM62x Processors refer [0] Technical Reference
Manual there is a layer of digital logic in front of the QSPI/OSPI
Drive when used in DAC mode. This is part of the Flash Subsystem (FSS)
which provides access to external Flash devices.

The FSS0_0_SYSCONFIG Register (Offset = 4h) has a BIT Field for
OSPI_32B_DISABLE_MODE which has a Reset value = 0. This means, OSPI 32bit
mode enabled by default.

Thus, by default controller operates in 32 bit mode causing it to always
align all data to 4 bytes from a 4byte aligned address. In some flash
chips like cypress for example if we try to read some regs in DAC mode
then it keeps sending the value of the first register that was requested
and inorder to read the next reg, we have to stop and re-initiate a new
transaction.

This causes wrong register values to be read than what is desired when
registers are read in DAC mode. Hence if the data.nbytes is very less
then prefer STIG mode for such small reads.

[0] https://www.ti.com/lit/ug/spruiv7a/spruiv7a.pdf

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230125081023.1573712-5-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:26 +00:00
Dhruva Gole
a8674ae02d
spi: cadence-quadspi: setup ADDR Bits in cmd reads
Setup the Addr bit field while issuing register reads in STIG mode. This
is needed for example flashes like cypress define in their transaction
table that to read any register there is 1 cmd byte and a few more address
bytes trailing the cmd byte. Absence of addr bytes will obviously fail
to read correct data from flash register that maybe requested by flash
driver because the controller doesn't even specify which address of the
flash register the read is being requested from.

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230125081023.1573712-4-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:25 +00:00
Dhruva Gole
e8c51b1643
spi: cadence-quadspi: Add flag for direct mode writes
Create new flag inorder to avoid playing with use_direct_mode
flag currently being used throughout the driver.
Disable DAC write if auto polling is disabled or CQSPI_DISABLE_DAC_MODE
is set.

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230125081023.1573712-3-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:24 +00:00
Dhruva Gole
d4f43a2d05
spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion
If one leaves the CQSPI_REG_CMDCTRL in an unclean state this may cause
issues in future command reads. This issue came to light when some flash
reads in STIG mode were coming back dirty.

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230125081023.1573712-2-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:24 +00:00
Christophe JAILLET
7464145862
regmap: Reorder fields in 'struct regmap_bus' to save some memory
Group some bool variables to reduce hole and avoid padding.
On x86_64, this shrinks the size from 136 to 128 bytes.

As an example:

$ size drivers/base/regmap/regmap-fsi.o (Before)
   text	   data	    bss	    dec	    hex	filename
   4837	    136	      0	   4973	   136d	drivers/base/regmap/regmap-fsi.o

$ size drivers/base/regmap/regmap-fsi.o (After)
   text	   data	    bss	    dec	    hex	filename
   4701	    136	      0	   4837	   12e5	drivers/base/regmap/regmap-fsi.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/077ca39622c8870a3ea932298a9cec34f7a8295a.1676363976.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:22 +00:00
Deepak R Varma
ec285cb999
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
Simplify code by using min helper macro for logical evaluation and value
assignment. The change also facilitates code realignment for improved
readability.
Proposed change is identified using minmax.cocci Coccinelle script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y+p2Hn0nrtHiKwPR@ubun2204.myguest.virtualbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:20 +00:00
Amadeusz Sławiński
1fd61d018a
ASoC: Intel: Skylake: Fix struct definition
The kernel is globally removing the ambiguous 0-length and 1-element
arrays in favor of flexible arrays, so that we can gain both compile-time
and run-time array bounds checking[1]. In this instance, struct
skl_cpr_cfg contains struct skl_cpr_gtw_cfg, which defined "config_data"
as a 1-element array.

However, case present in sound/soc/intel/skylake/skl-topology.h is not a
simple one as the structure takes part in IPC communication. Apparently
original definition missed one field, which while not used by AudioDSP
firmware when there is no additional data, is still expected to be part
of an IPC message. Currently this works because of how 'config_data' is
declared: 'config_data[1]'. Now when one replaces it with a flexible
array there would be one field missing. Update struct declaration to fix
this.

Reported-by: Sasa Ostrouska <casaxa@gmail.com>
Link: https://lore.kernel.org/all/CALFERdwvq5day_sbDfiUsMSZCQu9HG8-SBpOZDNPeMdZGog6XA@mail.gmail.com/
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
CC: Kees Cook <keescook@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230213205223.2679357-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:19 +00:00
Steffen Aschbacher
7af4222832
ASoC: tlv320adcx140: extend list of supported samplerates
The 'tlv320adcx140' driver currently supports 3 devices: TLV320ADC3140,
TLV320ADC5140 and TLV320ADC6140.

All 3 devices, support higher samplerates, up to 768-kHz according to their
datasheets.

In our applications, we only tested (and worked) with 96 kHz and 192 kHz.

This change extends the list of supported sample-rates for these devices
with 96 & 192 kHz.

References:
  https://www.ti.com/product/TLV320ADC3140
  https://www.ti.com/product/TLV320ADC5140
  https://www.ti.com/product/TLV320ADC6140

Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230214091051.16323-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:18 +00:00
Deepak R Varma
8854144349
ASoC: imx-pcm-rpmsg: Remove unused variable
Variable ret is initialed but is never modified or used except for
returning the initial value 0. The value can be directly returned
instead and the variable definition can be dropped.
Issue identified using returnvar.cocci Coccinelle semantic patch.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y+p9r5y9DPSJkPVf@ubun2204.myguest.virtualbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:17 +00:00
Matthias Kaehlcke
f7d00a9be1
SoC: rt5682s: Disable jack detection interrupt during suspend
The rt5682s driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682s_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:

[   19.672162] rt5682s 2-001a: ASoC: error at soc_component_read_no_lock on rt5682s.2-001a for register: [0x000000f0] -16

Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230209012002.1.Ib4d6481f1d38a6e7b8c9e04913c02ca88c216cf6@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:17 +00:00
Rander Wang
6611b975eb
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
Enable d0i3 streaming if all the active streams can
work in d0i3 state and playback is enabled.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:15 +00:00
Rander Wang
3e6b6ed34b
ASoC: SOF: Intel: Enable d0i3 work for ipc4
Schedule a delayed work for d0i3 entry after every non-pm ipc msg.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:14 +00:00
Rander Wang
1c91e927e5
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
The driver shall update the power state to D0i0 before sending
a generic IPC. Power-related IPCs are the exception to the rule,
they may be sent even when the power-state is D0i3

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:13 +00:00
Rander Wang
3c168838fb
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
Use set_pm_gate to unify pm gate setting for different
ipc version.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:12 +00:00
Rander Wang
167ca6a4fd
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
Set_pm_gate depends on ipc version. This patch defines
the ops for both IPC3 and IPC4.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-14 13:25:11 +00:00
Dan Carpenter
77191db5ba xhci: host: potential NULL dereference in xhci_generic_plat_probe()
It's possible to exit the loop with "sysdev" set to NULL.  In that
case we should use "&pdev->dev".

Fixes: ec5499d338 ("xhci: split out rcar/rz support from xhci-plat.c")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Y+T4kTcJwRwxNHJq@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-14 14:22:57 +01:00
Jiri Pirko
2edd925704 devlink: don't allow to change net namespace for FW_ACTIVATE reload action
The change on network namespace only makes sense during re-init reload
action. For FW activation it is not applicable. So check if user passed
an ATTR indicating network namespace change request and forbid it.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230213115836.3404039-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14 14:04:21 +01:00
Michael Kelley
dca5161f9b hv_netvsc: Check status in SEND_RNDIS_PKT completion message
Completion responses to SEND_RNDIS_PKT messages are currently processed
regardless of the status in the response, so that resources associated
with the request are freed.  While this is appropriate, code bugs that
cause sending a malformed message, or errors on the Hyper-V host, go
undetected. Fix this by checking the status and outputting a rate-limited
message if there is an error.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1676264881-48928-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14 13:56:56 +01:00
Greg Kroah-Hartman
c4a07e264d Merge 6.2-rc8 into usb-next
We need the USB fixes in here for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-14 13:44:08 +01:00
Andrei Otcheretianski
daf8fb4295 wifi: mac80211: Don't translate MLD addresses for multicast
MLD address translation should be done only for individually addressed
frames. Otherwise, AAD calculation would be wrong and the decryption
would fail.

Fixes: e66b7920aa ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20230214101048.792414-1-andrei.otcheretianski@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 13:36:06 +01:00
Ville Syrjälä
9d4b7af520 drm/i915: Use encoder->devdata in eDP init
Since we now populate encoder->devdata for all DP capable
platforms we can consult it directly during the eDP
connector init instead of taking a detour via some global
list/array.

Unfortunately we can't quite get rid of
intel_dp_is_port_edp() since it's still used by the higher
level ilk/vlv/chv output setup code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:09:08 +02:00
Ville Syrjälä
b17a15d618 drm/i915: Iterate all child devs in intel_bios_is_port_present()
Instead of consulting vbt.ports[] lets just go through the
whole child device list to check whether a specific port
was declared by the VBT or not.

Note that this doesn't change anything wrt. detecting duplicate
child devices with the same port as vbt.ports[] would also always
contain exactly one of the duplicates.

v2: Include a is_port_valid() check to deal with some broken VBTs
    Mention something about duplicate port detection (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214073818.20231-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:08:30 +02:00
Ville Syrjälä
b5d0bea793 drm/i915: Pass devdata to intel_bios_port_aux_ch()
Currently intel_bios_port_aux_ch() digs out the devdata
(VBT child device info) from the vbt.ports[] array. We
need to get rid of that, so just pass in the correct
encoder->devdata (now that we have it also for g4x+ ports)
directly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:07:45 +02:00
Ville Syrjälä
1b108bc760 drm/i915: Populate encoder->devdata for g4x+ DP/HDMI ports
Let's make encoder->devdata (the VBT information for the port)
available on g4x+ platforms as well. Much easier when you can
just grab it there instead of trying to find it from some global
list array based on the port.

Note that (unlike DDI platforms) we don't currently require
that each DP/HDMI port is actually declared in VBT. Perhaps
in the future we may want to rethink that, but for now just
stick in a debug+FIXME as a reminder.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:06:29 +02:00
Ville Syrjälä
ee9125720c drm/i915: Consult the registered encoders for the ICL combo PHY w/a
Display WA #1178 calls us to tweak some magic bits when doing AUX
to an external combo PHY port. Instead of looking to see if the VBT
has declared such a port (which could in theory even alias with a
declared eDP port on the same PHY) just check the real situation
based on the registered encoders.

The only slight chicken vs. egg situation here is during output
probing. But typically we'd register the eDP ports first and so
once we get to probe anything external on the combo PHY we have
already determined if it's eDP or not.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:05:35 +02:00
Ville Syrjälä
9151c85cbb drm/i915: Replace intel_bios_is_port_hpd_inverted() with intel_bios_encoder_hpd_invert()
intel_bios_is_port_hpd_inverted() is only used on bxt/glk on
which we always have encoder->devdata available. So consult
that instead of digging around in vbt.ports[].

And rename the function to match the common pattern.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:05:06 +02:00
Ville Syrjälä
5f42196d39 drm/i915: Replace intel_bios_is_lane_reversal_needed() with intel_bios_encoder_lane_reversal()
The sole user of intel_bios_is_lane_reversal_needed() has
the devdata already located, so pass it in directly instead
of digging it again from vbt.ports[].

And rename the function to follow the common pattern for
these things.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:04:42 +02:00
Ville Syrjälä
db5d650ff0 drm/i915: Replace intel_bios_is_lspcon_present() with intel_bios_encoder_is_lspcon()
We always have encoder->devdata available on the platforms
that can have LSPCON. So let's start looking there instead
of digging it out from vbt.ports[].

And let's rename the function to fit the common pattern
for these things.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:03:57 +02:00
Ville Syrjälä
d24b34758d drm/i915: Move variables to loop context
Lot of the loops over VBT child devices have variables
declared outside the loop but only used inside the loop.
Move the variables to a tighter scope.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:03:33 +02:00
Ville Syrjälä
dfefe7bc53 drm/i915: Pass the whole encoder to hotplug_enables()
bxt_hotplug_enables() needs to dig out not only the
hpd_pin but also the VBT child device info, so let's just
pass in the whole encoder to avoid having to look things
up multiple times.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14 14:03:05 +02:00
Wen Gong
d99975c495 wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
Currently the regulatory driver does not call the regulatory callback
reg_notifier for self managed wiphys. Sometimes driver needs cfg80211
to calculate the info of ieee80211_channel such as flags and power,
and driver needs to get the info of ieee80211_channel after hint of
driver, but driver does not know when calculation of the info of
ieee80211_channel become finished, so add notify to driver in
reg_process_self_managed_hint() from cfg80211 is a good way, then
driver could get the correct info in callback of reg_notifier.

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 12:37:39 +01:00
Lorenzo Bianconi
935ef47b16 wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
Since cfg80211_bss_color_notify() is now always run in non-atomic
context, get rid of gfp_t flags in the routine signature and always use
GFP_KERNEL for netlink message allocation.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c687724e7b53556f7a2d9cbe3d11cdcf065cb687.1675255390.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 12:35:02 +01:00
Vinay Gannevaram
9b89495e47 wifi: nl80211: Allow authentication frames and set keys on NAN interface
Wi-Fi Aware R4 specification defines NAN Pairing which uses PASN handshake
to authenticate the peer and generate keys. Hence allow to register and transmit
the PASN authentication frames on NAN interface and set the keys to driver or
underlying modules on NAN interface.

The driver needs to configure the feature flag NL80211_EXT_FEATURE_SECURE_NAN,
which also helps userspace modules to know if the driver supports secure NAN.

Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com>
Link: https://lore.kernel.org/r/1675519179-24174-1-git-send-email-quic_vganneva@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 12:35:02 +01:00
Karthikeyan Periyasamy
aaacf1740f wifi: mac80211: fix non-MLO station association
Non-MLO station frames are dropped in Rx path due to the condition
check in ieee80211_rx_is_valid_sta_link_id(). In multi-link AP scenario,
non-MLO stations try to connect in any of the valid links in the ML AP,
where the station valid_links and link_id params are valid in the
ieee80211_sta object. But ieee80211_rx_is_valid_sta_link_id() always
return false for the non-MLO stations by the assumption taken is
valid_links and link_id are not valid in non-MLO stations object
(ieee80211_sta), this assumption is wrong. Due to this assumption,
non-MLO station frames are dropped which leads to failure in association.

Fix it by removing the condition check and allow the link validation
check for the non-MLO stations.

Fixes: e66b7920aa ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://lore.kernel.org/r/20230206160330.1613-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 12:35:02 +01:00
Rameshkumar Sundaram
57b341e9ab wifi: mac80211: Allow NSS change only up to capability
Stations can update bandwidth/NSS change in
VHT action frame with action type Operating Mode Notification.
(IEEE Std 802.11-2020 - 9.4.1.53 Operating Mode field)

For Operating Mode Notification, an RX NSS change to a value
greater than AP's maximum NSS should not be allowed.
During fuzz testing, by forcefully sending VHT Op. mode notif.
frames from STA with random rx_nss values, it is found that AP
accepts rx_nss values greater that APs maximum NSS instead of
discarding such NSS change.

Hence allow NSS change only up to maximum NSS that is negotiated
and capped to AP's capability during association.

Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/20230207114146.10567-1-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 12:35:02 +01:00
Felix Fietkau
6e4c0d0460 wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDU
At least ath10k and ath11k supported hardware (maybe more) does not implement
mesh A-MSDU aggregation in a standard compliant way.
802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the
A-MSDU header (and little-endian).
As such, its length must not be included in the subframe length field.
Hardware affected by this bug treats the mesh control field as part of the
MSDU data and sets the length accordingly.
In order to avoid packet loss, keep track of which stations are affected
by this and take it into account when converting A-MSDU to 802.3 + mesh control
packets.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14 12:35:02 +01:00