The MDB maintained by the bridge is limited. When the bridge is configured
for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its
capacity. In SW datapath, the capacity is configurable through the
IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a
similar limit exists in the HW datapath for purposes of offloading.
In order to prevent the issue of unilateral exhaustion of MDB resources,
introduce two parameters in each of two contexts:
- Per-port and per-port-VLAN number of MDB entries that the port
is member in.
- Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled)
per-port-VLAN maximum permitted number of MDB entries, or 0 for
no limit.
The per-port multicast context is used for tracking of MDB entries for the
port as a whole. This is available for all bridges.
The per-port-VLAN multicast context is then only available on
VLAN-filtering bridges on VLANs that have multicast snooping on.
With these changes in place, it will be possible to configure MDB limit for
bridge as a whole, or any one port as a whole, or any single port-VLAN.
Note that unlike the global limit, exhaustion of the per-port and
per-port-VLAN maximums does not cause disablement of multicast snooping.
It is also permitted to configure the local limit larger than hash_max,
even though that is not useful.
In this patch, introduce only the accounting for number of entries, and the
max field itself, but not the means to toggle the max. The next patch
introduces the netlink APIs to toggle and read the values.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following patch will add two more maximum MDB allowances to the global
one, mcast_hash_max, that exists today. In all these cases, attempts to add
MDB entries above the configured maximums through netlink, fail noisily and
obviously. Such visibility is missing when adding entries through the
control plane traffic, by IGMP or MLD packets.
To improve visibility in those cases, add a trace point that reports the
violation, including the relevant netdevice (be it a slave or the bridge
itself), and the MDB entry parameters:
# perf record -e bridge:br_mdb_full &
# [...]
# perf script | cut -d: -f4-
dev v2 af 2 src ::ffff:0.0.0.0 grp ::ffff:239.1.1.112/00:00:00:00:00:00 vid 0
dev v2 af 10 src :: grp ff0e::112/00:00:00:00:00:00 vid 0
dev v2 af 2 src ::ffff:0.0.0.0 grp ::ffff:239.1.1.112/00:00:00:00:00:00 vid 10
dev v2 af 10 src 2001:db8:1::1 grp ff0e::1/00:00:00:00:00:00 vid 10
dev v2 af 2 src ::ffff:192.0.2.1 grp ::ffff:239.1.1.1/00:00:00:00:00:00 vid 10
CC: Steven Rostedt <rostedt@goodmis.org>
CC: linux-trace-kernel@vger.kernel.org
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is getting more to clean up in the following patches.
Structuring the cleanups in one labeled block will allow reusing the same
cleanup from several places.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since cleaning up the effects of br_multicast_new_port_group() just
consists of delisting and freeing the memory, the function
br_mdb_add_group_star_g() inlines the corresponding code. In the following
patches, number of per-port and per-port-VLAN MDB entries is going to be
maintained, and that counter will have to be updated. Because that logic
is going to be hidden in the br_multicast module, introduce a new hook
intended to again remove a newly-created group.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that br_multicast_new_port_group() takes an extack argument, move
setting the extack there. The downside is that the error messages end
up being less specific (the function cannot distinguish between (S,G)
and (*,G) groups). However, the alternative is to check in the caller
whether the callee set the extack, and if it didn't, set it. But that
is only done when the callee is not exactly known. (E.g. in case of a
notifier invocation.)
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it possible to set an extack in br_multicast_new_port_group().
Eventually, this function will check for per-port and per-port-vlan
MDB maximums, and will use the extack to communicate the reason for
the bounce.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make any attributes newly-added to br_port_policy or vlan_tunnel_policy
parsed strictly, to prevent userspace from passing garbage. Note that this
patchset only touches the former policy. The latter was adjusted for
completeness' sake. There do not appear to be other _deprecated calls
with non-NULL policies.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Entries can linger in cache without timer for days, thanks to
the gc_thresh1 limit. As result, without traffic, the confirmed
time can be outdated and to appear to be in the future. Later,
on traffic, NUD_STALE entries can switch to NUD_DELAY and start
the timer which can see the invalid confirmed time and wrongly
switch to NUD_REACHABLE state instead of NUD_PROBE. As result,
timer is set many days in the future. This is more visible on
32-bit platforms, with higher HZ value.
Why this is a problem? While we expect unused entries to expire,
such entries stay in REACHABLE state for too long, locked in
cache. They are not expired normally, only when cache is full.
Problem and the wrong state change reported by Zhang Changzhong:
172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/15994171/350520 probes 4 REACHABLE
350520 seconds have elapsed since this entry was last updated, but it is
still in the REACHABLE state (base_reachable_time_ms is 30000),
preventing lladdr from being updated through probe.
Fix it by ensuring timer is started with valid used/confirmed
times. Considering the valid time range is LONG_MAX jiffies,
we try not to go too much in the past while we are in
DELAY/PROBE state. There are also places that need
used/updated times to be validated while timer is not running.
Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sort headers alphabetically - it helps locating duplicates, and makes it
easier to figure out where to insert new headers. Alphabetic order should
also prove that each header is self-contained, i.e. can be included without
prerequisites.
Link: https://lore.kernel.org/r/20230202144628.14443-1-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
spi_nor_set_erase_type() was used either to set or to mask out an erase
type. When we used it to mask out an erase type a shift-out-of-bounds
was hit:
UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'
The setting of the size_{shift, mask} and of the opcode are unnecessary
when the erase size is zero, as throughout the code just the erase size
is considered to determine whether an erase type is supported or not.
Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF
is an unused opcode. Thus when masking out an erase type, just set the
erase size to zero. This will fix the shift-out-of-bounds.
Fixes: 5390a8df76 ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Louis Rannou <lrannou@baylibre.com>
Tested-by: Alexander Stein <Alexander.Stein@tq-group.com>
Link: https://lore.kernel.org/r/20230203070754.50677-1-tudor.ambarus@linaro.org
[ta: refine changes, new commit message, fix compilation error]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Update according to new dma-buf locking scheme.
Remove redundant WARN_ON()'s, dma_buf functions internally
have the same warnings already.
Fixes: 647371a660 ("accel/ivpu: Add GEM buffer object management")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-5-stanislaw.gruszka@linux.intel.com
(cherry picked from commit ec6ec9c6ca)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
The VPU_JSM_MSG_CONTEXT_DELETE will remove any resources associated
with the SSID, that included any blobs create by the user space
application.
The command can also remove doorbell registrations, but since this
does not work in HW scheduling case, we do not depend on this
capability and unregister the doorbells explicitly.
Fixes: cd7272215c ("accel/ivpu: Add command buffer submission logic")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-3-stanislaw.gruszka@linux.intel.com
(cherry picked from commit 38257f514d)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Daniel Machon says:
====================
net: Add support for PSFP in Sparx5
================================================================================
Add support for Per-Stream Filtering and Policing (802.1Q-2018, 8.6.5.1).
================================================================================
The VCAP CLM (VCAP IS0 ingress classifier) classifies streams,
identified by ISDX (Ingress Service Index, frame metadata), and maps
ISDX to streams.
Flow meters are also classified by ISDX, and implemented using service
policers (Service Dual Leacky Buckets, SDLB). Leacky buckets are linked
together in a leak chain of a leak group. Leak groups a preconfigured to serve
buckets within a certain rate interval.
Stream gates are time-based policers used by PSFP. Frames are dropped
based on the gate state (OPEN/ CLOSE), whose state will be altered based
on the Gate Control List (GCL) and current PTP time. Apart from
time-based policing, stream gates can alter egress queue selection for
the frames that pass through the Gate. This is done through Internal
Priority Selector (IPS). Stream gates are mapped from stream filters.
Support for tc actions gate and police, have been added to the VCAP IS0 set of
supported actions.
Examples:
// tc filter with gate action
$ tc filter add dev eth1 ingress chain 1100000 prio 1 handle 1001 protocol \
802.1q flower skip_sw vlan_id 100 action gate base-time 0 sched-entry open \
700000 7 8m sched-entry close 300000 action goto chain 1200000
// tc filter with police action
$ tc filter add dev eth1 ingress chain 1100000 prio 1 handle 1002 protocol \
802.1q flower skip_sw vlan_id 100 action police rate 1gbit burst 8096 \
conform-exceed drop action goto chain 1200000
================================================================================
Patches
================================================================================
Patch #1: Adds new register needed for PSFP.
Patch #2: Adds resource pools to control PSFP needed chip resources.
Patch #3: Adds support for SDLB's needed for flow-meters.
Patch #4: Adds support for service policers.
Patch #5: Adds support for PSFP flow-meters, using service policers.
Patch #6: Adds a new function to calculate basetime, required by flow-meters.
Patch #7: Adds support for PSFP stream gates.
Patch #8: Adds support for PSFP stream filters.
Patch #9: Adds a function to initialize flow-meters, stream gates and stream
filters.
Patch #10: Adds the required flower code to configure PSFP using the tc command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for tc actions gate and police, in order to implement
support for configuring PSFP through tc.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize the SDLB's, stream gates and stream filters.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring PSFP stream filters (IEEE 802.1Q-2018,
8.6.5.1.1).
The VCAP CLM (VCAP IS0 ingress classifier) classifies streams,
identified by ISDX (Ingress Service Index, frame metadata), and maps
ISDX to streams.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring PSFP stream gates (IEEE 802.1Q-2018,
8.6.5.1.2).
Stream gates are time-based policers used by PSFP. Frames are dropped
based on the gate state (OPEN/ CLOSE), whose state will be altered based
on the Gate Control List (GCL) and current PTP time. Apart from
time-based policing, stream gates can alter egress queue selection for
the frames that pass through the Gate. This is done through Internal
Priority Selector (IPS). Stream gates are mapped from stream filters.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function for calculating PTP basetime, required by the stream
gate scheduler to calculate gate state (open / close).
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring PSFP flow-meters (IEEE 802.1Q-2018,
8.6.5.1.3).
The VCAP CLM (VCAP IS0 ingress classifier) classifies streams,
identified by ISDX (Ingress Service Index, frame metadata), and maps
ISDX to flow-meters. SDLB's provide the flow-meter parameters.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add initial API for configuring policers. This patch add support for
service policers.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Service Dual Leacky Buckets (SDLB), used to implement
PSFP flow-meters. Buckets are linked together in a leak chain of a leak
group. Leak groups a preconfigured to serve buckets within a certain
rate interval.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add resource pools and accessor functions. These pools can be queried by
the driver, whenever a finite resource is required. Some resources can
be reused, in which case an index and a reference count is used to keep
track of users.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add registers needed for PSFP. This patch also renames a single
register, shortening its name (SYS_CLK_PER_100PS). Uses have been update
accordingly.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FW API structures have been updated to fix misaligned
structure members.
Also changed JSM message header format to account for
future improvements.
Added explicit check for minimum supported JSM API version.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-2-stanislaw.gruszka@linux.intel.com
(cherry picked from commit 4ea1e504db)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Update according to new dma-buf locking scheme.
Remove redundant WARN_ON()'s, dma_buf functions internally
have the same warnings already.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-5-stanislaw.gruszka@linux.intel.com
The VPU_JSM_MSG_CONTEXT_DELETE will remove any resources associated
with the SSID, that included any blobs create by the user space
application.
The command can also remove doorbell registrations, but since this
does not work in HW scheduling case, we do not depend on this
capability and unregister the doorbells explicitly.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-3-stanislaw.gruszka@linux.intel.com
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
FW API structures have been updated to fix misaligned
structure members.
Also changed JSM message header format to account for
future improvements.
Added explicit check for minimum supported JSM API version.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-2-stanislaw.gruszka@linux.intel.com
The streaming state is maintained by the vb2 core, so drivers
must never change it themselves.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't touch q->streaming directly, use the vb2_is_streaming()
function instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't touch q->streaming directly, use the vb2_is_streaming()
function instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use URL rather than plain text.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use URL rather than plain text.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The field 'pctrl' in 'struct fimc_is' is not used, just like
linux/pinctrl/consumer.h headers in the headers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In case of error, the function mtk_mutex_get()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
And also fix the err_free_mutex case.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sanity check in __vb2_queue_free() is obsolete ever since commit
f035eb4e97 ("[media] videobuf2: fix lockdep warning"). Remove it and
let __vb2_queue_free() return void.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
record the colorspace set by user.
if it's not supported by h264 vui, then zero will be written to vui,
but don't modify the user setting.
Fixes: 0401e659c1 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are no existing users of s5c73m3_platform_data in the tree, and
new users should either be using device tree, ACPI, or static device
properties, so let's remove it from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
v4l2_dbg and friends are legacy and should be removed.
Replaced all the calls with dev_dbg equivalent.
This also removes the 'debug' module parameter which has become obsolete.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for the Sony IMX415 CMOS image sensor.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add devicetree binding for the Sony IMX415 CMOS image sensor.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.
Fixes: commit c2a6a07afe ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ov5670 driver registers three controls as read-only:
- V4L2_CID_PIXEL_RATE
- V4L2_CID_LINK_FREQ
- V4L2_CID_HBLANK
The driver updates the range of HBLANK with __v4l2_ctrl_modify_range()
and updates the values of PIXEL_RATE and LINK_FREQ with an
explicit call to __v4l2_ctrl_s_ctrl() in ov5670_set_pad_format() time.
This causes the .set_ctrl handler to be called on these controls
causing a non-fatal warning to be emitted:
ov5670_set_ctrl Unhandled id:0x9e0902, val:0x824
This is currently only critical for HBLANK, as LINK_FREQ and PIXEL_RATE
currently only support a single value, and the v4l2-ctrl framework skips
calling .set_ctrl() if the current control value is not changed.
Expand the ov5670_set_ctrl() callback to handle the above controls
to remove the above warning and defend against future expansions
of the supported pixel rates and link frequencies.
Also be stricter and return an error value if a control is actually not
handled.
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>