Commit graph

1,185,212 commits

Author SHA1 Message Date
Michal Swiatkowski
70fbc15a65 ice: sync netdev filters after clearing VSI
In driver reload path the netdev isn't removed, but VSI is. Remove
filters on netdev right after removing them on VSI.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Michal Swiatkowski
5b246e533d ice: split probe into smaller functions
Part of code from probe can be reused in reload flow. Move this code to
separate function. Create unroll functions for each part of
initialization, like: ice_init_dev() and ice_deinit_dev(). It
simplifies unrolling and can be used in remove flow.

Avoid freeing port info as it could be reused in reload path.
Will be freed in remove path since is allocated via devm_kzalloc().

Also clean the remove path to reflect the init steps.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Jacob Keller
a696d61528 ice: stop hard coding the ICE_VSI_CTRL location
When allocating the ICE_VSI_CTRL, the allocated struct ice_vsi pointer is
stored into the PF's pf->vsi array at a fixed location. This was
historically done on the basis that it could provide an O(1) lookup for the
special control VSI.

Since we store the ctrl_vsi_idx, we already have O(1) lookup regardless of
where in the array we store this VSI.

Simplify the logic in ice_vsi_alloc by using the same method of storing the
control VSI as other types of VSIs.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Michal Swiatkowski
6624e780a5 ice: split ice_vsi_setup into smaller functions
Main goal is to reuse the same functions in VSI config and rebuild
paths.
To do this split ice_vsi_setup into smaller pieces and reuse it during
rebuild.

ice_vsi_alloc() should only alloc memory, not set the default values
for VSI.
Move setting defaults to separate function. This will allow config of
already allocated VSI, for example in reload path.

The path is mostly moving code around without introducing new
functionality. Functions ice_vsi_cfg() and ice_vsi_decfg() were
added, but they are using code that already exist.

Use flag to pass information about VSI initialization during rebuild
instead of using boolean value.

Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Michal Swiatkowski
0db66d20f9 ice: cleanup in VSI config/deconfig code
Do few small cleanups:

1) Rename the function to reflect that it doesn't configure all things
related to VSI. ice_vsi_cfg_lan() better fits to what function is doing.

ice_vsi_cfg() can be use to name function that will configure whole VSI.

2) Remove unused ethtype field from VSI. There is no need to set
ethtype here, because it is never used.

3) Remove unnecessary check for ICE_VSI_CHNL. There is check for
ICE_VSI_CHNL in ice_vsi_get_qs, so there is no need to check it before
calling the function.

4) Simplify ice_vsi_alloc() call. There is no need to check the type of
VSI before calling ice_vsi_alloc(). For ICE_VSI_CHNL vf is always NULL
(ice_vsi_setup() is called with vf=NULL).
For ICE_VSI_VF or ICE_VSI_CTRL ch is always NULL and for other VSI types
ch and vf are always NULL.

5) Remove unnecessary call to ice_vsi_dis_irq(). ice_vsi_dis_irq() will
be called in ice_vsi_close() flow (ice_vsi_close() -> ice_vsi_down() ->
ice_vsi_dis_irq()). Remove unnecessary call.

6) Don't remove specific filters in release. All hw filters are removed
in ice_fltr_remove_alli(), which is always called in VSI release flow.
There is no need to remove only ethertype filters before calling
ice_fltr_remove_all().

7) Rename ice_vsi_clear() to ice_vsi_free(). As ice_vsi_clear() only
free memory allocated in ice_vsi_alloc() rename it to ice_vsi_free()
which better shows what function is doing.

8) Free coalesce param in rebuild. There is potential memory leak if
configuration of VSI lan fails. Free coalesce to avoid it.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Michal Swiatkowski
2be29286ed ice: alloc id for RDMA using xa_array
Use xa_array instead of deprecated ida to alloc id for RDMA aux driver.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Michal Swiatkowski
2b8db6afbc ice: move RDMA init to ice_idc.c
Simplify probe flow by moving all RDMA related code to ice_init_rdma().
Unroll irq allocation if RDMA initialization fails.

Implement ice_deinit_rdma() and use it in remove flow.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03 09:54:18 -08:00
Christoph Hellwig
1eb9cd1500 libceph: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:43 -07:00
Christoph Hellwig
58dfe14073 vringh: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
9088151f1b sunrpc: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
efde918ac6 rxrpc: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
8976fa6d79 swap: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
cc342a2193 io_uring: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
664e40789a splice: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
8ead80b2c5 orangefs: use bvec_set_{page,folio} to initialize bvecs
Use the bvec_set_page and bvec_set_folio helpers to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
8bb7cd842c nfs: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
cd59800320 coredump: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
220ae4a5c2 cifs: use bvec_set_page to initialize bvecs
Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Link: https://lore.kernel.org/r/20230203150634.3199647-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:42 -07:00
Christoph Hellwig
5c6542b661 ceph: use bvec_set_page to initialize a bvec
Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-13-hch@lst.de
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 10:17:33 -07:00
Ard Biesheuvel
1758817e7e efi: Use standard format for printing the EFI revision
The UEFI spec section 4.2.1 describes the way the human readable EFI
revision should be constructed from the 32-bit revision field in the
system table:

  The upper 16 bits of this field contain the major revision value,
  and the lower 16 bits contain the minor revision value. The minor
  revision values are binary coded decimals and are limited to the
  range of 00..99.

  When printed or displayed UEFI spec revision is referred as (Major
  revision).(Minor revision upper decimal).(Minor revision lower
  decimal) or (Major revision).(Minor revision upper decimal) in case
  Minor revision lower decimal is set to 0.

Let's adhere to this when logging the EFI revision to the kernel log.

Note that the bit about binary coded decimals is bogus, and the minor
revision lower decimal is simply the minor revision modulo 10, given the
symbolic definitions provided by the spec itself:

  #define EFI_2_40_SYSTEM_TABLE_REVISION ((2<<16) | (40))
  #define EFI_2_31_SYSTEM_TABLE_REVISION ((2<<16) | (31))
  #define EFI_2_30_SYSTEM_TABLE_REVISION ((2<<16) | (30))

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-02-03 18:09:00 +01:00
David Vernet
16c294a6aa bpf/docs: Document kfunc lifecycle / stability expectations
BPF kernel <-> kernel API stability has been discussed at length over
the last several weeks and months. Now that we've largely aligned over
kfuncs being the way forward, and BPF helpers being considered
functionally frozen, it's time to document the expectations for kfunc
lifecycles and stability so that everyone (BPF users, kfunc developers,
and maintainers) are all aligned, and have a crystal-clear understanding
of the expectations surrounding kfuncs.

To do that, this patch adds that documentation to the main kfuncs
documentation page via a new 'kfunc lifecycle expectations' section. The
patch describes how decisions are made in the kernel regarding whether
to include, keep, deprecate, or change / remove a kfunc. As described
very overtly in the patch itself, but likely worth highlighting here:

"kfunc stability" does not mean, nor ever will mean, "BPF APIs may block
development elsewhere in the kernel".

Rather, the intention and expectation is for kfuncs to be treated like
EXPORT_SYMBOL_GPL symbols in the kernel. The goal is for kfuncs to be a
safe and valuable option for maintainers and kfunc developers to extend
the kernel, without tying anyone's hands, or imposing any kind of
restrictions on maintainers in the same way that UAPI changes do.

In addition to the 'kfunc lifecycle expectations' section, this patch
also adds documentation for a new KF_DEPRECATED kfunc flag which kfunc
authors or maintainers can choose to add to kfuncs if and when they
decide to deprecate them. Note that as described in the patch itself, a
kfunc need not be deprecated before being changed or removed -- this
flag is simply provided as an available deprecation mechanism for those
that want to provide a deprecation story / timeline to their users.
When necessary, kfuncs may be changed or removed to accommodate changes
elsewhere in the kernel without any deprecation at all.

Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230203155727.793518-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-02-03 09:01:29 -08:00
Ard Biesheuvel
234fa51db9 efi: Drop minimum EFI version check at boot
We currently pass a minimum major version to the generic EFI helper that
checks the system table magic and version, and refuse to boot if the
value is lower.

The motivation for this check is unknown, and even the code that uses
major version 2 as the minimum (ARM, arm64 and RISC-V) should make it
past this check without problems, and boot to a point where we have
access to a console or some other means to inform the user that the
firmware's major revision number made us unhappy. (Revision 2.0 of the
UEFI specification was released in January 2006, whereas ARM, arm64 and
RISC-V support where added in 2009, 2013 and 2017, respectively, so
checking for major version 2 or higher is completely arbitrary)

So just drop the check.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-02-03 18:01:07 +01:00
Ian Rogers
e30f34053e tools build: Add test echo-cmd
Add quiet_cmd_test so that:
$(Q)$(call echo-cmd,test)

will print:
TEST   <path>

This is useful for executing compile-time tests similar to what
happens for fortify tests in the kernel's lib directory.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:22 -03:00
Ian Rogers
d2e3dc829e perf jevents: Correct bad character encoding
A character encoding issue added a "3D" character that breaks the
metrics test.

Fixes: 40769665b6 ("perf jevents: Parse metrics during conversion")
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
3340a08354 perf pmu-events: Fix testing with JEVENTS_ARCH=all
The #slots literal will return NAN when not on ARM64 which causes a
perf test failure when not on an ARM64 for a JEVENTS_ARCH=all build:
..
 10.4: Parsing of PMU event table metrics with fake PMUs             : FAILED!
..
Add an is_test boolean so that the failure can be avoided when running
as a test.

Fixes: acef233b7c ("perf pmu: Add #slots literal support for arm64")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
5a09b1fd1b perf jevents: Add model list option
This allows the set of generated jevents events and metrics be limited
to a subset of the model names. Appropriate if trying to minimize the
binary size where only a set of models are possible.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
62774db2a0 perf jevents: Generate metrics and events as separate tables
Turn a perf json event into an event, metric or both. This reduces the
number of events needed to scan to find an event or metric. As events
no longer need the relatively seldom used metric fields, 4 bytes is
saved per event. This reduces the big C string's size by 335kb (14.8%)
on x86.

Note, for the test PMU architecture pme_test_soc_cpu is renamed
pmu_events__test_soc_cpu for consistency with the event vs metric
naming convention.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
f8ea2c1524 perf pmu-events: Introduce pmu_metrics_table
Add a metrics table that is just a cast from pmu_events_table. This
changes the APIs so that event and metric usage of the underlying
table is different. For the no jevents case the tables are already
separate, later changes will separate the tables for the jevents case.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
9f587cc93f perf jevents: Combine table prefix and suffix writing
Combine into a single function to simplify, in a later change, writing
metrics separately.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
6f8f98ab6c perf stat: Remove evsel metric_name/expr
Metrics are their own unit and these variables held broken metrics
previously and now just hold the value NULL. Remove code that used
these variables.

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
d9dc8874d6 perf pmu-events: Remove now unused event and metric variables
Previous changes separated the uses of pmu_event and pmu_metric,
however, both structures contained all the variables of event and
metric. This change removes the event variables from metric and the
metric variables from event.

Note, this change removes the setting of evsel's metric_name/expr as
these fields are no longer part of struct pmu_event. The metric
remains but is no longer implicitly requested when the event is. This
impacts a few Intel uncore events, however, as the ScaleUnit is shared
by the event and the metric this utility is questionable. Also the
MetricNames look broken (contain spaces) in some cases and when trying
to use the functionality with '-e' the metrics fail but regular
metrics with '-M' work. For example, on SkylakeX '-M' works:

```
$ perf stat -M LLC_MISSES.PCIE_WRITE -a sleep 1

 Performance counter stats for 'system wide':

                 0      UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 #  57896.0 Bytes  LLC_MISSES.PCIE_WRITE  (49.84%)
             7,174      UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1                                        (49.85%)
                 0      UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3                                        (50.16%)
                63      UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0                                        (50.15%)

       1.004576381 seconds time elapsed
```

whilst the event '-e' version is broken even with --group/-g (fwiw, we should also remove -g [1]):

```
$ perf stat -g -e LLC_MISSES.PCIE_WRITE -g -a sleep 1
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE
Add UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 event to groups to get metric expression for LLC_MISSES.PCIE_WRITE

 Performance counter stats for 'system wide':

            27,316 Bytes LLC_MISSES.PCIE_WRITE

       1.004505469 seconds time elapsed
```

The code also carries warnings where the user is supposed to select
events for metrics [2] but given the lack of use of such a feature,
let's clean the code and just remove.

[1] https://lore.kernel.org/lkml/20220707195610.303254-1-irogers@google.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/util/stat-shadow.c?id=01b8957b738f42f96a130079bc951b3cc78c5b8a#n425

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:54:21 -03:00
Ian Rogers
96d2a74618 perf pmu-events: Separate the metrics from events for no jevents
Separate the event and metric table when building without jevents. Add
find_core_metrics_table and perf_pmu__find_metrics_table while
renaming existing utilities to be event specific, so that users can
find the right table for their need.

Committer notes:

Fix the build on aarch64 with:

  tools/perf/arch/arm64/util/pmu.c
  @@ -32,7 +32,7 @@ const struct pmu_events_table *pmu_events_table__find(void)
  -               return perf_pmu__find_table(pmu);
  +               return perf_pmu__find_events_table(pmu);

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-03 13:53:52 -03:00
Binbin Zhou
6a185f5558 MAINTAINERS: Add entry for the Loongson LS2X I2C driver
Add myself as maintainer of the Loongson LS2X I2C driver.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:38:53 +01:00
Raviteja Narayanam
31ec26b2db i2c: xiic: Remove interrupt enable/disable in Rx path
'DYNAMIC_MODE_READ_BROKEN_BIT' quirk added in the driver,
effected IP versions no longer enter dynamic mode.
So, remove local_irq_save/local_irq_restore APIs from driver.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:35:08 +01:00
Raviteja Narayanam
e4c1ff772e i2c: xiic: Add smbus_block_read functionality
smbus_block_read is added to xiic driver to read from few sensors
which support this command. Since the number of bytes to read is not
known prior to transfer, xiic standard mode is being used for low level
control of IP.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:34:16 +01:00
Raviteja Narayanam
317b56c9aa i2c: xiic: Add wait for FIFO empty in send_tx
If the tx_half_empty interrupt comes first instead of tx_empty,
STOP bit is generated even before all the bytes are transmitted
out on the bus.
STOP bit should be sent only after all the bytes in the FIFO are
transmitted out of the FIFO. So wait until FIFO is empty before sending
the STOP bit.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:34:08 +01:00
Raviteja Narayanam
2fd5cf352e i2c: xiic: Switch to Xiic standard mode for i2c-read
Xilinx I2C IP has two modes of operation, both of which implement
I2C transactions. The only difference from sw perspective is the
programming sequence for these modes.
Dynamic mode  -> Simple to program, less number of steps in sequence.
Standard mode -> Gives flexibility, more number of steps in sequence.

In dynamic mode, during the i2c-read transactions, if there is a
delay(> 200us) between the register writes (address & byte count),
read transaction fails. On a system with load, this scenario is
occurring frequently.
To avoid this, switch to standard mode if there is a read request.

Added a quirk to identify the IP version effected by this and follow
the standard mode.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:34:00 +01:00
Raviteja Narayanam
813eac4fcb i2c: xiic: Fix Rx and Tx paths in standard mode
repeated start

When a combined message request comes from user space, the
controller has to initiate repeated start sequence. In standard
mode, this repeated start sequence is corrupted if there is still
data in the Tx FIFO.

So, always make sure that all the bytes are completely transmitted
out of the FIFO by waiting for TXEMPTY, if the previous message is
of Tx type.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:33:43 +01:00
Raviteja Narayanam
acea4e4458 i2c: xiic: Add standard mode support for > 255 byte
read transfers

Added standard mode for AXI I2C controller to enable read transfers
of size more than 255 bytes. The driver selects standard mode in the
following scenarios.

1. If a single message request comes from user space, requesting a
read of more than 255 bytes

2. If a message set request comes from user space consisting of many
messages and if any one of them is a read operation, irrespective
of the size of transfer. (This is done because it is observed that
repeated start operation is not happening in dynamic mode read as
expected in a message set request from user space.)

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03 17:33:32 +01:00
Jaroslav Kysela
d045bceff5 ALSA: hda: Fix the control element identification for multiple codecs
Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.

The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.

This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.

This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.

BugLink: https://github.com/alsa-project/alsa-lib/issues/294
BugLink: https://github.com/alsa-project/alsa-lib/issues/205
Fixes: 54d1740315 ("[ALSA] hda-codec - Fix connection list parsing")
Fixes: 1afe206ab6 ("ALSA: hda - Try to find an empty control index when it's occupied")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230202092013.4066998-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-03 17:19:20 +01:00
ChiaEn Wu
eedb923279 Documentation: power: rt9467: Document exported sysfs entries
Document the settings exported by rt9467 charger driver through sysfs
entries:
- sysoff_enable

Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
[update kernel version and date]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-02-03 17:09:42 +01:00
ChiaEn Wu
6f7f70e3a8 power: supply: rt9467: Add Richtek RT9467 charger driver
RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
for portable applications.

It integrates a synchronous PWM controller, power MOSFETs,
input current sensing and regulation, high-accuracy voltage regulation,
and charge termination. The charge current is regulated through
integrated sensing resistors.

The RT9467 also features USB On-The-Go (OTG) support. It also integrates
D+/D- pin for USB host/charging port detection.

Co-developed-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-02-03 17:08:28 +01:00
ChiaEn Wu
e1b4620fb5 dt-bindings: power: supply: Add Richtek RT9467 battery charger
Add bindings for the Richtek RT9467 battery charger.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-02-03 17:08:28 +01:00
Ard Biesheuvel
ace013a543 efi: zboot: Use EFI protocol to remap code/data with the right attributes
Use the recently introduced EFI_MEMORY_ATTRIBUTES_PROTOCOL in the zboot
implementation to set the right attributes for the code and data
sections of the decompressed image, i.e., EFI_MEMORY_RO for code and
EFI_MEMORY_XP for data.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-02-03 16:39:22 +01:00
Aleksa Savic
7505dab78f hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate
Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Aquastream Ultimate watercooling pump, which communicates
through a proprietary USB HID protocol.

Coolant temp and external temp sensor readings are available, along with
speed, power, voltage and current of both the pump and optionally connected
fan. It also exposes pressure and flow speed readings.

Additionally, serial number and firmware version are exposed through
debugfs.

Tested by a user on Github [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/50

Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230203120324.579808-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03 07:30:11 -08:00
Aleksa Savic
e0f6c370f0 hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3
Extend aquacomputer_d5next driver to expose the temp sensor of the
Aquacomputer Poweradjust 3 fan controller, which communicates
through a proprietary USB HID protocol.

The Poweradjust 3 is not currently known to expose firmware version
and serial number, so don't create debugfs entries if their values
can't be retrieved.

Tested by a user on Github [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/57

Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230131101210.8095-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03 07:30:11 -08:00
Alexander Stein
1c999af509 hwmon: (iio_hwmon) use dev_err_probe
Instead of just returning an error code, add an error message as well.
While at it, simplify the code and use a common return path.
Upon deferral this also nicely lists the following message in
/sys/kernel/debug/devices_deferred:
adc     iio_hwmon: Failed to get channels

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230131103359.625081-1-alexander.stein@ew.tq-group.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03 07:30:11 -08:00
Tianfei zhang
e1983220ae hwmon: intel-m10-bmc-hwmon: Add N6000 sensors
Add sensors supported by N6000 card with MAX10 BMC to monitor
temperature, voltage, current, and power on board.

Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Link: https://lore.kernel.org/r/20230131135450.43072-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03 07:30:11 -08:00
SeongJae Park
a37672b072 Docs/hwmon/index: Add missing SPDX License Identifier
Add missing SPDX License Identifier for hwmon documentation index file.

Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230122213650.187710-5-sj@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03 07:30:11 -08:00
Frank Crawford
0118905560 hwmon: (it87) Updated documentation for recent updates to it87
Updated the driver documentation to list all current chips and
describe the module parameters as per descriptions in the code.

Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230128060308.1549707-8-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03 07:30:11 -08:00