All the indirect jumps in the eBPF JIT already use expolines, except
for the tail call one.
Fixes: de5cb6eb51 ("s390: use expoline thunks in the BPF JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sk_assign is failing on an s390x machine running Debian "bookworm" for
2 reasons: legacy server_map definition and uninitialized addrlen in
recvfrom() call.
Fix by adding a new-style server_map definition and dropping addrlen
(recvfrom() allows NULL values for src_addr and addrlen).
Since the test should support tc built without libbpf, build the prog
twice: with the old-style definition and with the new-style definition,
then select the right one at runtime. This could be done at compile
time too, but this would not be cross-compilation friendly.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bfqd->bfq_wr_max_time is set to 0 in bfq_init_queue and is never changed.
It is only used in bfq_wr_duration when bfq_wr_max_time > 0 which never
meets, so bfqd->bfq_wr_max_time is not used actually. Just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-9-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We jump to tag only for returning current rq. Return directly to
remove this tag.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116095153.3810101-8-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have already avoided a circular list in bfq_setup_merge (see comments
in bfq_setup_merge() for details), so bfq_queue will not appear in it's
new_bfqq list. Just remove this check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-7-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inject limit is updated or reset when time_is_before_eq_jiffies(
decrease_time_jif + several msecs) or think-time state changes.
decrease_time_jif is initialized to 0 and will be set to current jiffies
when inject limit is updated or reset. If the jiffies is slightly greater
than LONG_MAX, time_is_after_eq_jiffies(0) will keep for a long time, so as
time_is_after_eq_jiffies(decrease_time_jif + several msecs). If the
think-time state never chages, then the injection will not work as expected
for long time.
To be more specific:
Function bfq_update_inject_limit maybe triggered when jiffies pasts
decrease_time_jif + msecs_to_jiffies(10) in bfq_add_request by setting
bfqd->wait_dispatch to true.
Function bfq_reset_inject_limit are called in two conditions:
1. jiffies pasts bfqq->decrease_time_jif + msecs_to_jiffies(1000) in
function bfq_add_request.
2. jiffies pasts bfqq->decrease_time_jif + msecs_to_jiffies(100) or
bfq think-time state change from short to long.
Fix this by initializing bfqq->decrease_time_jif to current jiffies
to trigger service injection soon when service injection conditions
are met.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-4-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function bfq_choose_bfqq_for_injection may temporarily raise inject limit
to one request if current inject_limit is 0 before search of the source
queue for injection. However the search below will reset inject limit to
bfqd->in_service_queue which is zero for raised inject limit. Then the
temporarily raised inject limit never works as expected.
Assigment limit to bfqd->in_service_queue in search is needed as limit
maybe overwriten to min_t(unsigned int, 1, limit) for condition that
a large in-flight request is on non-rotational devices in found queue.
So we need to reset limit to bfqd->in_service_queue for normal case.
Actually, we have already make sure bfqd->rq_in_driver is < limit before
search, then
-Limit is >= 1 as bfqd->rq_in_driver is >= 0. Then min_t(unsigned int,
1, limit) is always 1. So we can simply check bfqd->rq_in_driver with
1 instead of result of min_t(unsigned int, 1, limit) for larget request in
non-rotational device case to avoid overwritting limit and the bug is gone.
-For normal case, we have already check bfqd->rq_in_driver is < limit,
so we can return found bfqq unconditionally to remove unncessary check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-2-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 180dccb0db ("blk-mq: fix tag_get wait task can't be awakened")
mentioned that in case of shared tags, there could be just one real
active hctx(queue) because of lazy detection of tag idle. Then driver tag
allocation may wait forever on this real active hctx(queue) if wake_batch
is > hctx_max_depth where hctx_max_depth is available tags depth for the
actve hctx(queue). However, the condition wake_batch > hctx_max_depth is
not strong enough to avoid IO hung as the sbitmap_queue_wake_up will only
wake up one wait queue for each wake_batch even though there is only one
waiter in the woken wait queue. After this, there is only one tag to free
and wake_batch may not be reached anymore. Commit 180dccb0db ("blk-mq:
fix tag_get wait task can't be awakened") methioned that driver tag
allocation may wait forever. Actually, the inactive hctx(queue) will be
truely idle after at most 30 seconds and will call blk_mq_tag_wakeup_all
to wake one waiter per wait queue to break the hung. But IO hung for 30
seconds is also not acceptable. Set batch size to small enough that depth
of the shared hctx(queue) is enough to wake up all of the queues like
sbq_calc_wake_batch do to fix this potential IO hung.
Although hctx_max_depth will be clamped to at least 4 while wake_batch
recalculation does not do the clamp, the wake_batch will be always
recalculated to 1 when hctx_max_depth <= 4.
Fixes: 180dccb0db ("blk-mq: fix tag_get wait task can't be awakened")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are three differences between __sbitmap_get and
__sbitmap_get_shallow when searching free bit:
1. __sbitmap_get_shallow limit number of bit to search per word.
__sbitmap_get has no such limit.
2. __sbitmap_get_shallow always searches with wrap set. __sbitmap_get set
wrap according to round_robin.
3. __sbitmap_get_shallow always searches from first bit in first word.
__sbitmap_get searches from first bit when round_robin is not set
otherwise searches from SB_NR_TO_BIT(sb, alloc_hint).
Add helper function sbitmap_find_bit function to do common search while
accept "limit depth per word", "wrap flag" and "first bit to
search" from caller to support the need of both __sbitmap_get and
__sbitmap_get_shallow.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-5-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rewrite sbitmap_find_bit_in_index as following:
1. Rename sbitmap_find_bit_in_index to sbitmap_find_bit_in_word
2. Accept "struct sbitmap_word *" directly instead of accepting
"struct sbitmap *" and "int index" to get "struct sbitmap_word *".
3. Accept depth/shallow_depth and wrap for __sbitmap_get_word from caller
to support need of both __sbitmap_get_shallow and __sbitmap_get.
With helper function sbitmap_find_bit_in_word, we can remove repeat
code in __sbitmap_get_shallow to find bit considring deferred clear.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-4-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit fbb564a557 ("lib/sbitmap: Fix invalid loop in
__sbitmap_queue_get_batch()") mentioned that "Checking free bits when
setting the target bits. Otherwise, it may reuse the busying bits."
This commit add check to make sure all masked bits in word before
cmpxchg is zero. Then the existing check after cmpxchg to check any
zero bit is existing in masked bits in word is redundant.
Actually, old value of word before cmpxchg is stored in val and we
will filter out busy bits in val by "(get_mask & ~val)" after cmpxchg.
So we will not reuse busy bits methioned in commit fbb564a557
("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()"). Revert
new-added check to remove redundant check.
Fixes: fbb564a557 ("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Updates to alloc_hint in the loop in __sbitmap_get_shallow() are mostly
pointless and equivalent to setting alloc_hint to zero (because
SB_NR_TO_BIT() considers only low sb->shift bits from alloc_hint). So
simplify the logic.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-2-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Moved the driver to the accel subsystem. Currently only the files were
moved (including the uapi file which was also renamed). This doesn't
include registering to the accel subsystem. This will probably be only
in the next kernel version.
- In case of decoder error (axi error) in Gaudi2, we can now find the exact
IP that initiated the erroneous transaction and print the details for
better debug.
- Add more trace events. We now can trace mmio transactions and communication
with the preboot firmware.
- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
was support so far only for Gaudi1.
- Add uAPI to flush memory transactions (to the device memory). This is
needed by the communications library in case of doing p2p with a host NIC
which access our HBM directly through the PCI BAR.
- Add uAPI to pass-through a request from user-space to firmware and get the
result back to user-space. This will allow the driver code to avoid the
need to add new packet (in the communication channel with the firmware) for
every new request type.
- Remove the option to export dma-buf by memory allocation handle in our uAPI.
This was planned for Gaudi2 but was never used. Instead, we will do export
by memory address (same as Gaudi1). In addition, we added the option to
specify an offset to the address. This is needed in Gaudi2 because there
the user allocates the entire HBM in one allocation, but would like to
export only small part of it.
- Multiple bug fixes, refactors and small optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmPS7fYACgkQZR1NuKta
54Bu/wf+I4dySZslvWhjqom9zYlubnwKLpLxuKGeR2OeMZxe5AJSyNCohmMXjl4S
ac+2qktRbecYXwNHCZBFjybKUgqBN5VuxRNRjV3/It+koON82QkMvBB48CeD7W/P
9y5b38LYOxqFixd5U5e7MpNhU1/AAKGnqEtQZgub0h0IeOrZM0RkTL6PJoUdQAcn
ap3pNXm6cpNKo5EZYlyRwEJRw1YlUKt3lcsKNnBDjij1j+IOtQ0sPA7Ii0YMdtqh
/gL81JkyZmgQBq9aGjr8vGyILvVTfm8qJu7t4hGEZ165bAP4bQaU9W+YMDgpKmgM
Bc+NghtCz13gmKPY/gudP5fDbPHUdA==
=fOxf
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-01-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.3:
- Moved the driver to the accel subsystem. Currently only the files were
moved (including the uapi file which was also renamed). This doesn't
include registering to the accel subsystem. This will probably be only
in the next kernel version.
- In case of decoder error (axi error) in Gaudi2, we can now find the exact
IP that initiated the erroneous transaction and print the details for
better debug.
- Add more trace events. We now can trace mmio transactions and communication
with the preboot firmware.
- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
was support so far only for Gaudi1.
- Add uAPI to flush memory transactions (to the device memory). This is
needed by the communications library in case of doing p2p with a host NIC
which access our HBM directly through the PCI BAR.
- Add uAPI to pass-through a request from user-space to firmware and get the
result back to user-space. This will allow the driver code to avoid the
need to add new packet (in the communication channel with the firmware) for
every new request type.
- Remove the option to export dma-buf by memory allocation handle in our uAPI.
This was planned for Gaudi2 but was never used. Instead, we will do export
by memory address (same as Gaudi1). In addition, we added the option to
specify an offset to the address. This is needed in Gaudi2 because there
the user allocates the entire HBM in one allocation, but would like to
export only small part of it.
- Multiple bug fixes, refactors and small optimizations.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126213317.GA1520525@ogabbay-vm-u20.habana-labs.com
To discard false readings, one should use "ti,penirq-recheck-delay-usecs".
Checking get_pendown_state() at the beginning, most of the time fails
causing malfunctioning.
Fixes: ffa458c1bd ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Controllers that report pressure (e.g. ADS7846) use 5 commands and the
correct sequence is READ_X, READ_Y, READ_Z1, READ_Z2, PWRDOWN.
Controllers that don't report pressure (e.g. ADS7845/ADS7843) use only 3
commands and the correct sequence should be READ_X, READ_Y, PWRDOWN. But
the sequence sent was incorrect: READ_X, READ_Y, READ_Z1.
Fix this by setting the third (and last) command to PWRDOWN.
Fixes: ffa458c1bd ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-3-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ADS7845 doesn't support pressure.
Avoid the following error reported by libinput-list-devices:
"ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE".
Fixes: ffa458c1bd ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
net10 is connected to an SFP module. Unfortunately, the I2C lines are
not connected due to an address conflict. Now that DPAA uses phylink, we
can use in-band-status. This lets us determine whether the link is up or
down instead of assuming it is up all the time. Also fix the phy mode
while we're here.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add new carrier board device tree Yavia for the Verdin iMX8M Plus SoM.
Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.
Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add new carrier board device tree Yavia for the Verdin iMX8M Mini SoM.
Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.
Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use generic "mcu" node name for rave-sp node, as recommended by
Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT for DH DRC02 unit, which is a universal controller device.
The system has two ethernet ports, two CANs, RS485 and RS232, USB,
capacitive buttons and an OLED display. For this board a DHCOM
i.MX6ULL SoM configuration without WiFi/BT is used. The interface
is used for the SD card instead.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LED and a custom
board-to-board expansion connector. For this board a DHCOM i.MX6ULL
SoM configuration without WiFi/BT is used. The interface is used
for the SD card instead. Make this adjustment by using a separate DT
include file.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for DH electronics DHCOM SoM and PDK2 rev. 400 carrier
board. This is an SoM with i.MX6ULL and an evaluation kit. The
baseboard provides Ethernet, UART, USB, CAN and optional display.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit 64dc8c732f ("block, bfq: fix possible uaf for 'bfqq->bic'"),
bic->bfqq will be accessed in bic_set_bfqq(), however, in some context
bic->bfqq will be freed, and bic_set_bfqq() is called with the freed
bic->bfqq.
Fix the problem by always freeing bfqq after bic_set_bfqq().
Fixes: 64dc8c732f ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230130014136.591038-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Same as done for both LCDIF interfaces in the MEDIA domain, set
the panic priority of the LCDIF instance in the HDMI domain to
the maximium NoC priority of 7 to minimize chances of display
underflows.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per binding doc reg-mux.yaml, the #mux-control-cells should be 1
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 94a905a79f ("ARM: dts: imx7s: add multiplexer controls")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For some ops on rpc handle:
1. ksmbd_session_rpc_method(), possibly on high frequency.
2. ksmbd_session_rpc_close().
id is used as indexing key to lookup channel, in that case,
linear search based on list may suffer a bit for performance.
Implements sess->rpc_handle_list as xarray.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For some ops on channel:
1. lookup_chann_list(), possibly on high frequency.
2. ksmbd_chann_del().
Connection is used as indexing key to lookup channel, in that case,
linear search based on list may suffer a bit for performance.
Implements sess->ksmbd_chann_list as xarray.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Bindings expect certain pattern for OPP table node name and underscores
are not allowed:
rk3399-rock-pi-4a-plus.dtb: dmc_opp_table: $nodename:0: 'dmc_opp_table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230119124631.91080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As other rk336x based devices, the Rock 3 Model A has issues with high
speed SD cards, so lower the speed to 50 instead of 104 in the same
manor has the Quartz64 Model B has.
Fixes: 22a442e658 ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20230128112432.132302-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently parent pd can be freed before child pd:
t1: remove cgroup C1
blkcg_destroy_blkgs
blkg_destroy
list_del_init(&blkg->q_node)
// remove blkg from queue list
percpu_ref_kill(&blkg->refcnt)
blkg_release
call_rcu
t2: from t1
__blkg_release
blkg_free
schedule_work
t4: deactivate policy
blkcg_deactivate_policy
pd_free_fn
// parent of C1 is freed first
t3: from t2
blkg_free_workfn
pd_free_fn
If policy(for example, ioc_timer_fn() from iocost) access parent pd from
child pd after pd_offline_fn(), then UAF can be triggered.
Fix the problem by delaying 'list_del_init(&blkg->q_node)' from
blkg_destroy() to blkg_free_workfn(), and using a new disk level mutex to
synchronize blkg_free_workfn() and blkcg_deactivate_policy().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230119110350.2287325-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A new field 'online' is added to blkg_policy_data to fix following
2 problem:
1) In blkcg_activate_policy(), if pd_alloc_fn() with 'GFP_NOWAIT'
failed, 'queue_lock' will be dropped and pd_alloc_fn() will try again
without 'GFP_NOWAIT'. In the meantime, remove cgroup can race with
it, and pd_offline_fn() will be called without pd_init_fn() and
pd_online_fn(). This way null-ptr-deference can be triggered.
2) In order to synchronize pd_free_fn() from blkg_free_workfn() and
blkcg_deactivate_policy(), 'list_del_init(&blkg->q_node)' will be
delayed to blkg_free_workfn(), hence pd_offline_fn() can be called
first in blkg_destroy(), and then blkcg_deactivate_policy() will
call it again, we must prevent it.
The new field 'online' will be set after pd_online_fn() and will be
cleared after pd_offline_fn(), in the meantime pd_offline_fn() will only
be called if 'online' is set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230119110350.2287325-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some cgroup policies will access parent pd through child pd even
after pd_offline_fn() is done. If pd_free_fn() for parent is called
before child, then UAF can be triggered. Hence it's better to guarantee
the order of pd_free_fn().
Currently refcount of parent blkg is dropped in __blkg_release(), which
is before pd_free_fn() is called in blkg_free_work_fn() while
blkg_free_work_fn() is called asynchronously.
This patch make sure pd_free_fn() called from removing cgroup is ordered
by delaying dropping parent refcount after calling pd_free_fn() for
child.
BTW, pd_free_fn() will also be called from blkcg_deactivate_policy()
from deleting device, and following patches will guarantee the order.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230119110350.2287325-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We found that the blk_mq_hw_sysfs_store interface has no place to use.
The object default_hw_ctx_attrs using blk_mq_hw_sysfs_ops only uses
the show method and does not use the store method.
Since this patch:
4a46f05ebf ("blk-mq: move hctx and ctx counters from sysfs to debugfs")
moved the store method to debugfs, the store method is not used anymore.
So let me do some tiny work to clean up unused code.
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230128030419.2780298-1-zhongjinghua@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
s390 iterates over the bio using bio_for_each_segment and doesn't need
any bio splitting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20230123075356.60847-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ps3vram iterates over the bio one segment, that is page aligned and max
page sized chunk, a time. Because of that there is no point in
calling bio_split_to_limits, or explicitly setting the default limits
that are only used by bio_split_to_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20230123074718.57951-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We ran into an issue where a production workload would randomly grind to
a halt and not continue until the pending IO had timed out. This turned
out to be a complicated interaction between queue freezing and polled
IO:
1) You have an application that does polled IO. At any point in time,
there may be polled IO pending.
2) You have a monitoring application that issues a passthrough command,
which is marked with side effects such that it needs to freeze the
queue.
3) Passthrough command is started, which calls blk_freeze_queue_start()
on the device. At this point the queue is marked frozen, and any
attempt to enter the queue will fail (for non-blocking) or block.
4) Now the driver calls blk_mq_freeze_queue_wait(), which will return
when the queue is quiesced and pending IO has completed.
5) The pending IO is polled IO, but any attempt to poll IO through the
normal iocb_bio_iopoll() -> bio_poll() will fail when it gets to
bio_queue_enter() as the queue is frozen. Rather than poll and
complete IO, the polling threads will sit in a tight loop attempting
to poll, but failing to enter the queue to do so.
The end result is that progress for either application will be stalled
until all pending polled IO has timed out. This causes obvious huge
latency issues for the application doing polled IO, but also long delays
for passthrough command.
Fix this by treating queue enter for polled IO just like we do for
timeouts. This allows quick quiesce of the queue as we still poll and
complete this IO, while still disallowing queueing up new IO.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vrate_min is calculated by DIV64_U64_ROUND_UP, but vrate_max is calculated
by div64_u64. Vrate_min may be 1 greater than vrate_max if the input
values min and max of cost.qos are equal.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230117070806.3857142-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
echo max of u64 to cost.model can cause divide by 0 error.
# echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model
divide error: 0000 [#1] PREEMPT SMP
RIP: 0010:calc_lcoefs+0x4c/0xc0
Call Trace:
<TASK>
ioc_refresh_params+0x2b3/0x4f0
ioc_cost_model_write+0x3cb/0x4c0
? _copy_from_iter+0x6d/0x6c0
? kernfs_fop_write_iter+0xfc/0x270
cgroup_file_write+0xa0/0x200
kernfs_fop_write_iter+0x17d/0x270
vfs_write+0x414/0x620
ksys_write+0x73/0x160
__x64_sys_write+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL,
overflow would happen if bps plus IOC_PAGE_SIZE is greater than
ULLONG_MAX, it can cause divide by 0 error.
Fix the problem by setting basecost
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230117070806.3857142-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iocost is based on rq_qos, which can only work for request based device,
thus it doesn't make sense to configure iocost for bio based device.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230117070806.3857142-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The behavior of 'enum' types has changed in gcc-13, so now the
UNBUSY_THR_PCT constant is interpreted as a 64-bit number because
it is defined as part of the same enum definition as some other
constants that do not fit within a 32-bit integer. This in turn
leads to some inefficient code on 32-bit architectures as well
as a link error:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: block/blk-iocost.o: in function `ioc_timer_fn':
blk-iocost.c:(.text+0x68e8): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: blk-iocost.c:(.text+0x6908): undefined reference to `__aeabi_uldivmod'
Split the enum definition to keep the 64-bit timing constants in
a separate enum type from those constants that can clearly fit
within a smaller type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230118080706.3303186-1-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following warning:
Documentation/block/ublk.rst:157: WARNING: Enumerated list ends without a blank line; unexpected unindent.
Documentation/block/ublk.rst:171: WARNING: Enumerated list ends without a blank line; unexpected unindent.
Fixes: 56f5160bc1b8 ("ublk_drv: add mechanism for supporting unprivileged ublk device")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230118042318.127900-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a generic bdev_zone_no() helper to calculate zone number for a
given sector in a block device. This helper internally uses disk_zone_no()
to find the zone number.
Use the helper bdev_zone_no() to calculate nr of zones. This lets us
make modifications to the math if needed in one place.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230110143635.77300-4-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of open coding to check for zone start, add a helper to improve
readability and store the logic in one place.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230110143635.77300-3-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>