Checking for disabled master pipe on a timing synchronized pipe is
incorrect in the case of ODM combine. This case is acceptable as long as
the disabled master pipe is part of the ODM tree. Skip printing error
message if this condition holds true.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e81b6a4427.
Reverting to put in a better solution which does not involve checking
DCN version.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Extract dp link training logic out to their own files.
link_dp_training - high level training sequence and helper functions.
link_dp_training_8b_10b - dp1.x training
link_dp_training_auxless - aux-less training
link_dp_traininig_dpia - dpia training
link_dp_training_fixed_vs_pe_retimer - fixed vs pe retimer training
link_dp_training_128b_132b - dp2.1 training
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current implementation of SubVP does not support cases where stream
timing matched neither the destination rect nor the source rect.
Will need to further debug to see how we can support these cases.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.
[how]
slower down the HW i2c speed when used by HW i2c.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MALL SS and Subvp use the same calculations for determining the size of
the required allocation for a given surface, which is already done in
DML. Add an interface to extract this information from VBA variables and
use in their respective helper functions. Also refactor existing code to
remove stale workarounds.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML does not explicitly consider support for space in MALL required for
subvp phantom pipes. This adds a check to make sure portion of phantom
surface can fit in MALL.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML incorrectly uses surface width for determining DCC meta size in MALL
allocation calculations. Meta pitch should be used instead.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two issues existed:
1) Configs that support DRR, but have it disabled will fail subvp+vblank
validation incorrectly. Use subvp+vblank path for this case.
2) Configs that support DRR and have it enabled can use higher voltage level
than required if they also support subvp+vblank. Use lowest supported voltage
level for this case.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This beginning comment is not kernel-doc, so change the "/**" to a
normal "/*" comment to prevent a kernel-doc warning:
drivers/misc/pci_endpoint_test.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Link: https://lore.kernel.org/r/20230113063937.20912-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-pci@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This tab was deleted accidentally and triggers a Smatch warning:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1006 gfx_v8_0_init_microcode()
warn: inconsistent indenting
Add it back.
Fixes: 0aaafb7359 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX8")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To pick the changes in:
8aff460f21 ("KVM: x86: Add a VALID_MASK for the flags in kvm_msr_filter_range")
c1340fe359 ("KVM: x86: Add a VALID_MASK for the flag in kvm_msr_filter")
be83794210 ("KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y8VR5wSAkd2A0HxS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
b0305c1e0e ("KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y7Loj5slB908QSXf@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert the function PHY_BBConfig8188E() away from returning _FAIL or
_SUCCESS which uses inverted error logic. Use the common error logic
instead. Return 0 for success and negative values for failure.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the fubction phy_BB8188E_Config_ParaFile() away from returning
_FAIL or _SUCCESS which uses inverted error logic. Use the common error
logic instead. Return 0 for success and negative values for failure.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the function phy_RF6052_Config_ParaFile() away from returning
_FAIL or _SUCCESS which uses inverted error logic. Use the common error
logic instead. Return 0 for success and negative values for failure.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the function PHY_MACConfig8188E() away from returning _FAIL or
_SUCCESS which uses inverted error logic. Use the common error logic
instead. Return 0 for success and negative values for failure.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_read function takes a struct intf_hdl only to extract the struct
adapter from it. We can pass struct adapter directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-18-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove two unused macros that allocate and free usb buffers.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-17-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct io_req is not needed in the r8188eu driver. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-16-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a couple of IO related defines which are not used in the r8188eu
driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-15-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the prototypes for the unused _rtw_read_mem and _rtw_write_mem
functions.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-14-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove prototypes for interface handler functions. They are not used by
the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove struct reg_protocol_wt. It's not used in the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove struct reg_protocol_rd. It's not used in the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_power_down function is not present in the r8188eu driver. Remove
its prototype.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtw_write_scsi function is not present in the r8188eu driver. Remove
its prototype.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the prototypes for attrib read and write functions which are not
present in the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct io_queue is not used in the r8188eu driver. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some prototypes for async write functions which are not present in
the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some prototypes for async read functions which are not present in
the r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some prototypes for ioreq functions which are not present in the
r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove some prototypes for io functions which are not present in the
r8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct io_priv has only one member (and a pointer to the enclosing struct
adapter). We can remove struct io_priv and move its member directly into
struct adapter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_kill_urb handles a NULL parameter. There's no need for NULL checks
before we call usb_kill_urb.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111100201.251905-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the if clause in usb_write_port_complete and process the urb
status regardless of bSurpriseRemoved, bDriverStopped and
bWritePortCancel.
The only possible results of urb status processing are updates to
bSurpriseRemoved and bDriverStopped. All of the three status variable are
set to true only if the whole USB processing has to be stopped (when the
driver is unloaded or when the system goes to sleep).
It's no problem if one of the "stop everything" variables is already set
and the urb status processing sets another one.
This patch removes the last goto in usb_write_port_complete. It's also
part of the ongoing effort to limit the use of the "stop everything"
variables.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regs parameter of the usb_write_port_complete function is not used. We
can remove it.
We can also remove the macro to hide the regs parameter when
usb_write_port_complete is used as callback function for an urb transfer.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This trivial patch reformats the usb_write_port_complete function.
Hopefully, this makes the code a bit easier to read.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the satus handling in usb_write_port_complete. Make it clearer
what happens for each status and avoid all the goto statements.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vcs_setting in struct xmit_priv is not used any more. We can remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vcs component in struct xmit_priv is set but not used. We can remove
vcs and the rtw_update_protection function, whose only job is to set vcs.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vcs_type component of struct xmit_priv is not used. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused defines for Queue Select Value in TxDesc.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
txirp_cnt in struct xmit_priv is initialised but never read. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hal_xmit_handler is not used by the r8188eu driver. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dir_dev in struct adapter is not used by the r8188eu driver. It can be
removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>