Commit graph

1,185,212 commits

Author SHA1 Message Date
Andrew Lunn
c0fc8e6dce net: mdio: xgmac_mdio: Separate C22 and C45 transactions
The xgmac MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.

While at it, remove the misleading comment. According to Vladimir
Oltean:
 - miimcom is a register accessed by fsl_pq_mdio.c, not by xgmac_mdio.c
 - "device dev" doesn't really refer to anything (maybe "dev_addr").
 - I don't understand what is meant by the comment "All PHY
   configuration has to be done through the TSEC1 MIIM regs". Or rather
   said, I think I understand, but it is irrelevant to the driver for 2
   reasons:
    * TSEC devices use the fsl_pq_mdio.c driver, not this one
    * It doesn't matter to this driver whose TSEC registers are used for
      MDIO access. The driver just works with the registers it's given,
      which is a concern for the device tree.
 - barring the above, the rest just describes the MDIO bus API, which is
   superfluous

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:37 -08:00
Andrew Lunn
b3c84ae5ff net: mdio: mvmdio: Convert XSMI bus to new API
The marvell MDIO driver supports two different hardware blocks. The
XSMI block is C45 only. Convert this block to the new API, and only
populate the c45 calls in the bus structure.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:36 -08:00
Andrew Lunn
002dd3de09 net: mdio: mdio-bitbang: Separate C22 and C45 transactions
The bitbbanging bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new driver API calls.

The SH Ethernet driver places wrappers around these functions. In
order to not break boards which might be using C45, add similar
wrappers for C45 operations.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:36 -08:00
Andrew Lunn
ce30fa56cb net: mdio: Move mdiobus_c45_addr() next to users
Now that mdiobus_c45_addr() is only used within the MDIO code during
fallback, move the function next to its only users. This function
should not be used any more in drivers, the c45 helpers should be used
in its place, so hiding it away will prevent any new users from being
added.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:36 -08:00
Andrew Lunn
b063b1924f net: mdio: C22 is now optional, EOPNOTSUPP if not provided
When performing a C22 operation, check that the bus driver actually
provides the methods, and return -EOPNOTSUPP if not. C45 only busses
do exist, and in future their C22 methods will be NULL.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:36 -08:00
Andrew Lunn
555d64c6d8 net: mdio: mdiobus_register: update validation test
Now that C45 uses its own read/write methods, the validation performed
when a bus is registers needs updating. All combinations of C22 and
C45 are supported, but both read and write methods must be provided,
read only busses are not supported etc.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:36 -08:00
Andrew Lunn
3a65e5f917 net: pcs: pcs-xpcs: Use C45 MDIO API
Convert the PCS-XPCS driver to make use of the C45 MDIO bus API for
modify_change().

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:36 -08:00
Andrew Lunn
4e4aafcddb net: mdio: Add dedicated C45 API to MDIO bus drivers
Currently C22 and C45 transactions are mixed over a combined API calls
which make use of a special bit in the reg address to indicate if a
C45 transaction should be performed. This makes it impossible to know
if the bus driver actually supports C45. Additionally, many C22 only
drivers don't return -EOPNOTSUPP when asked to perform a C45
transaction, they mistaking perform a C22 transaction.

This is the first step to cleanly separate C22 from C45. To maintain
backwards compatibility until all drivers which are capable of
performing C45 are converted to this new API, the helper functions
will fall back to the older API if the new API is not
supported. Eventually this fallback will be removed.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10 15:53:33 -08:00
Pu Lehui
7f78804957 bpf, x86: Simplify the parsing logic of structure parameters
Extra_nregs of structure parameters and nr_args can be
added directly at the beginning, and using a flip flag
to identifiy structure parameters. Meantime, renaming
some variables to make them more sense.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230105035026.3091988-1-pulehui@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-10 15:53:22 -08:00
Eric Huang
a6941f89d7 drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU
The point bo->kfd_bo is NULL for queue's write pointer BO
when creating queue on mGPU. To avoid using the pointer
fixes the error.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:11:08 -05:00
Guchun Chen
972fb53d36 drm/amd/pm/smu13: BACO is supported when it's in BACO state
This leverages the logic in smu11. No need to talk to SMU to
check BACO enablement as it's in BACO state already.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0, 6.1
2023-01-10 18:10:34 -05:00
Eric Huang
ba029e9991 drm/amdkfd: Add sync after creating vram bo
There will be data corruption on vram allocated by svm
if the initialization is not complete and application is
writting on the memory. Adding sync to wait for the
initialization completion is to resolve this issue.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:09:53 -05:00
Eric Huang
7f347e3f82 drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU
The point bo->kfd_bo is NULL for queue's write pointer BO
when creating queue on mGPU. To avoid using the pointer
fixes the error.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:05:03 -05:00
Deepak R Varma
447395e18a drm/amd/display: No need for Null pointer check before kfree
kfree() & vfree() internally performs NULL check on the pointer handed
to it and take no action if it indeed is NULL. Hence there is no need
for a pre-check of the memory pointer before handing it to
kfree()/vfree().

Issue reported by ifnullfree.cocci Coccinelle semantic patch script.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:04:53 -05:00
Guchun Chen
45bf79719f drm/amd/pm/smu13: BACO is supported when it's in BACO state
This leverages the logic in smu11. No need to talk to SMU to
check BACO enablement as it's in BACO state already.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:04:45 -05:00
Eric Huang
8ce1d25514 drm/amdkfd: Add sync after creating vram bo
There will be data corruption on vram allocated by svm
if the initialization is not complete and application is
writting on the memory. Adding sync to wait for the
initialization completion is to resolve this issue.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:04:38 -05:00
Deepak R Varma
9d086e0dda drm/amdkfd: Use resource_size() helper function
Use the resource_size() function instead of a open coded computation
resource size. It makes the code more readable.

Issue identified using resource_size.cocci coccinelle semantic patch.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10 18:04:24 -05:00
Michael Ellerman
53ab112a95 Merge branch 'fixes' into next
Merge our fixes branch to bring in the linker script fixes for older
toolchains.
2023-01-11 09:52:42 +11:00
Kees Cook
129d868ede bpf: Replace 0-length arrays with flexible arrays
Zero-length arrays are deprecated [1]. Replace struct bpf_array's union
of 0-length arrays with flexible arrays. Detected with GCC 13, by using
-fstrict-flex-arrays=3:

  arch/x86/net/bpf_jit_comp.c: In function 'bpf_tail_call_direct_fixup':
  arch/x86/net/bpf_jit_comp.c:606:37: warning: array subscript <unknown> is outside array bounds of 'void *[0]' [-Warray-bounds=]
    606 |                 target = array->ptrs[poke->tail_call.key];
        |                          ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
  In file included from include/linux/filter.h:9,
                   from arch/x86/net/bpf_jit_comp.c:9:
  include/linux/bpf.h:1527:23: note: while referencing 'ptrs'
   1527 |                 void *ptrs[0] __aligned(8);
        |                       ^~~~

  [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230105192646.never.154-kees@kernel.org
2023-01-10 23:36:40 +01:00
Randy Dunlap
32a47817d0 cgroup/cpuset: fix a few kernel-doc warnings & coding style
Fix kernel-doc notation warnings:

kernel/cgroup/cpuset.c:1309: warning: Excess function parameter 'cpuset' description in 'update_parent_subparts_cpumask'
kernel/cgroup/cpuset.c:3909: warning: expecting prototype for cpuset_mem_spread_node(). Prototype was for cpuset_spread_node() instead

Also drop a blank line before EXPORT_SYMBOL_GPL() to be consistent
with kernel coding style.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-01-10 12:28:17 -10:00
Christopher Obbard
a1d3281450 arm64: dts: rockchip: Add rock-5b board
Add board file for the RK3588 Rock 5B board. This is a basic
implementation which just brings up the eMMC and UART which is
enough to successfully boot Linux.

The ethernet controller is connected via PCIe so support will
come in a follow-up patch.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230109155801.51642-8-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Sebastian Reichel
d1824cf957 arm64: dts: rockchip: Add rock-5a board
Add board file for the RK3588s Rock 5A board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to access eMMC, UART and Ethernet (i.e.
enough to successfully boot Linux).

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230109155801.51642-7-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Kever Yang
e904ca928a arm64: dts: rockchip: Add rk3588-evb1 board
Add board file for the RK3588 evaluation board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to successfully boot Linux from eMMC,
connect via UART or Ethernet.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[rebase, update commit message, use EVB1 for SoC bringup]
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Sebastian Reichel
999f0ec365 dt-bindings: arm: rockchip: add initial rk3588 boards
Add DT binding documentation for the Rockchip RK3588 EVB1,
Radxa Rock 5 Model A and B.

Co-Developed-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Kever Yang
c9211fa260 arm64: dts: rockchip: Add base DT for rk3588 SoC
This initial version supports CPU, dma, interrupts, timers, UART and
SDHCI (everything necessary to boot Linux on this system on chip) as
well as Ethernet, I2C, PWM and SPI.

The DT is split into rk3588 and rk3588s, which is a reduced version
(i.e. with less peripherals) of the former.

Co-Developed-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Co-Developed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Co-Developed-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[rebase, squash and reword commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Jagan Teki <jagan@edgeble.ai>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-neu6a
Link: https://lore.kernel.org/r/20230109155801.51642-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Jianqun Xu
d85f8a5c79 arm64: dts: rockchip: Add rk3588 pinctrl data
This adds the pin controller data for rk3588 and rk3588s.

Co-Developed-by: Shengfei Xu <xsf@rock-chips.com>
Signed-off-by: Shengfei Xu <xsf@rock-chips.com>
Co-Developed-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Co-Developed-by: Steven Liu <steven.liu@rock-chips.com>
Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
Co-Developed-by: Jon Lin <jon.lin@rock-chips.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Co-Developed-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
[port from vendor tree merging all fixes]
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Jagan Teki <jagan@edgeble.ai>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-neu6a
Link: https://lore.kernel.org/r/20230109155801.51642-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Sebastian Reichel
306f74d278 dt-bindings: soc: rockchip: add initial rk3588 syscon compatibles
Add IOC and PHP GRF syscon compatibles for RK3588.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:17 +01:00
Manoj Sai
87ecb88223 arm64: dts: rockchip: increase spi-max-frequency of nor flash for roc-rk3399-pc
Increase the spi-max-frequency of nor flash from 10Mhz to 30Mhz,this improves the
flash raw write speed by 0.9 MB/s to 1.6MB/s and the time taken to write is
get reduced from 36 seconds to 20 seconds.

Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20221124072714.450223-1-abbaraju.manojsai@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Chris Morgan
dd48a03066 arm64: dts: rockchip: Update leds for Odroid Go Advance
Update the blue LED to be controlled via pwm to enable control of LED
brightness. Add red LED as a GPIO controlled LED. The documentation
stated "label" was depreciated so function and color was used instead.
The LED names (led-2 and led-3) are given because that is what they
are numbered on the board itself; LED 1 is wired directly into an
always on regulator and is not controllable. LED 2 is labelled "alive"
on the board and documentation recommends we set the function as
status over other miscellaneous functions. LED 3 is labelled "chg" on
the board.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Chris Morgan
1b5aaeda74 arm64: dts: rockchip: update px30 thermal zones for GPU
Without the trips, the following errors are received in the dmesg
log and the rockchip-thermal driver fails to load the gpu sensor:

"thermal_sys: Failed to find 'trips' node"
"rockchip-thermal ff280000.tsadc: failed to register sensor 1: -22"

Trip values are assumed, unfortunately, as the same values as the
CPU. The datasheet and TRM didn't appear to have any information
regarding thermals for the GPU.

Stress tested successfully on my Odroid Go Advance.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Chris Morgan
b8e3a0ff76 arm64: dts: rockchip: don't set cpll rate for Odroid Go
The Odroid Go Advance devicetree tries to set the rate for the cpll
clock to 17MHz, which is not a supported rate. This fails, and triggers
the error of "clk: couldn't set cpll clk rate to 17000000 (-22),
current rate: 17000000" in the dmesg log. Remove the incorrect rate.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Chris Morgan
0d43439881 arm64: dts: rockchip: Change audio card name for Odroid Go
Change the audio card name for the Odroid Go Advance series to
rk817_int. This matches the audio card name of the Anbernic RG353V.
This is done to provide a consistent card name so that a single ALSA
UCM file can be used for all (identical) implementations of this codec
and configuration combo. The rk817_int configuration is for when the
internal speaker amplifier of the rk817 is used. The other Anbernic
devices have the name as rk817_ext for when an external speaker
amplifier is used.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Chukun Pan
51712e1d01 arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.

This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Chukun Pan
229e312019 dt-bindings: arm: rockchip: Add Orange Pi R1 Plus
Add devicetree binding documentation for the Orange Pi R1 Plus.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221203074149.11543-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Alex Riabchenko
6e97ac440b arm64: dts: rockchip: Add IR receiver to BPI-R2Pro
Add the infrared receiver and its associated pinctrl entry.

Based on Aurelien Jarno's patchset:
https://lore.kernel.org/lkml/20220930051246.391614-14-aurelien@aurel32.net/

Signed-off-by: Alex Riabchenko <d3adme4t@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20221214155433.112257-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Andy Yan
cdf46cdbab arm64: dts: rockchip: Add dts for EmbedFire rk3568 LubanCat 2
LubanCat 2 is a rk3568 based SBC from EmbedFire.

Specification:
- Rockchip rk3568
- LPDDR4/4X 1/2/4/8 GB
- TF scard slot
- eMMC 8/32/64/128 GB
- Gigabit ethernet x 2
- HDMI out
- USB 2.0 Host x 1
- USB 2.0 Type-C OTG x 1
- USB 3.0 Host x 1
- Mini PCIE interface for WIFI/BT module
- M.2 key for 2280 NVME
- 40 pin header

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20230108110817.2214859-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:16 +01:00
Andy Yan
7b1aa1613e dt-bindings: arm: rockchip: Add EmbedFire LubanCat 2
Add EmbedFire LubanCat 2

Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230108110742.2214800-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:15:15 +01:00
Furkan Kardame
a8e35c4beb arm64: dts: rockchip: add audio nodes to rk3566-roc-pc
This patch adds simple audio card nodes
Enabled i2s0_8ch as it is needed for hdmi audio

Added i2s1_8ch as it is needed for 3.5mm audio jack and limit it to a
single-channel, as i2s1m0_sdo{1,2,3} and i2s1m0_sdi{1,2,3} are used
by pcie.

Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20230109203232.45192-1-f.kardame@manjaro.org
[dropped the duplicate i2s@fe410000 node]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-01-10 23:13:58 +01:00
James Hilliard
af0e26beaa bpftool: Add missing quotes to libbpf bootstrap submake vars
When passing compiler variables like CC=$(HOSTCC) to a submake
we must ensure the variable is quoted in order to handle cases
where $(HOSTCC) may be multiple binaries.

For example when using ccache $HOSTCC may be:
"/usr/bin/ccache /usr/bin/gcc"

If we pass CC without quotes like CC=$(HOSTCC) only the first
"/usr/bin/ccache" part will be assigned to the CC variable which
will cause an error due to dropping the "/usr/bin/gcc" part of
the variable in the submake invocation.

This fixes errors such as:
/usr/bin/ccache: invalid option -- 'd'

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230110014504.3120711-1-james.hilliard1@gmail.com
2023-01-10 23:12:47 +01:00
Arnd Bergmann
50f6f34e60 ARM: footbridge: remove CATS
Nobody seems to have a CATS machine any more, so remove
it now, leaving only NetWinder and EBSA285.

Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
046cd3c698 gpio: remove iop driver
The iop32x platform was removed, and its gpio driver is now
orphaned.

Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
b91a69d162 ARM: iop32x: remove the platform
This was marked as unused in 5.19 and can now be removed

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
fd68572b57 ARM: orion5x: remove dsa_chip_data references
This is no longer used anywhere, which means we can kill off
one link to gpio numbers.

Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
c09846fc1f ARM: orion: remove unused board files
As planned earlier, all board support that was marked unused can be
removed now after nobody explicitly asked for these to be kept.

In particular, all of the reference designs get removed now, as these
are not commonly used productively any more. Also, the machines that
were not supported by Debian or the Debian_on_Buffalo group because of
limitations with RAM size are gone.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
e2fe85aa6a ARM: mv78xx0: un-deprecate Terastation WXL
This board is still being worked on by the Debian-on-Buffalo
project, so let's leave it in the tree for now.

Link: https://github.com/1000001101000/Debian_on_Buffalo
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
2b45e1fa93 ASoC: remove unused ep93xx files
A couple of ep93xx board files were unused and got removed, so
the corresponding ASoC support can also be removed.

Cc: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Ryan Mallon <rmallon@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
ca2259c352 ARM: ep93xx: remove old board files
These five board files were marked as unused a while ago, and
nobody wanted to keep them around for longer, so remove them
now.

We still have the edb93xx, visision_ep9307 and ts72xx files,
which can hopefully be converted to device tree in the future.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:27 +01:00
Arnd Bergmann
4ede65e1c1 mmc: remove cns3xxx driver
The cns3xxx platform is gone, so this driver is now orphaned.

Cc: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:26 +01:00
Arnd Bergmann
e73307b9eb ARM: cns3xxx: remove entire platform
cns3xxx was marked as unused a while ago, and gets removed
entirely now.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:26 +01:00
Arnd Bergmann
2b843f82a1 ARM: at91: remove stale MAINTAINER file entries
Going through the entries of recently removed machine types,
I found these two that were removed a long time ago.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-10 23:10:26 +01:00