Commit graph

1,185,212 commits

Author SHA1 Message Date
Bjorn Andersson
fa33f2aa96 drm/msm/dp: Add SDM845 DisplayPort instance
The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514395/
Link: https://lore.kernel.org/r/20221207220012.16529-8-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09 03:06:43 +02:00
Bjorn Andersson
5bd69fd161 drm/msm/dp: Add DP and EDP compatibles for SC8280XP
The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.

The first two are defined to be DisplayPort only, while the latter pair
(of each instance) can be either DisplayPort or Embedded DisplayPort.
The two sets are tied to the possible compatibels.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514394/
Link: https://lore.kernel.org/r/20221207220012.16529-7-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09 03:06:43 +02:00
Rob Herring
3db50cb6db dt-bindings: i2c: Convert Synquacer I2C to DT schema
Convert the Socionext Synquacer I2C binding to DT schema format.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221209171658.3352119-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2023-01-08 18:14:17 -06:00
Rob Herring
5314187a60 dt-bindings: interrupt-controller: Convert Synquacer EXIU to DT schema
Convert the Socionext Synquacer EXIU interrupt controller to DT schema
format.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221209171636.3351602-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2023-01-08 18:14:17 -06:00
Dmitry Baryshkov
1a1bd3f450 drm/msm/dsi/phy: rework register setting for 7nm PHY
In preparation to adding the sm8350 and sm8450 PHYs support, rearrange
register values calculations in dsi_7nm_phy_enable(). This change bears
no functional changes itself, it is merely a preparation for the next
patch.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514232/
Link: https://lore.kernel.org/r/20221207012231.112059-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09 01:07:10 +02:00
Dmitry Baryshkov
44a9f577a0 dt-bindings: display/msm: add sm8350 and sm8450 DSI PHYs
SM8350 and SM8450 platforms use the same driver and same bindings as the
existing 7nm DSI PHYs. Add corresponding compatibility strings.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514228/
Link: https://lore.kernel.org/r/20221207012231.112059-4-dmitry.baryshkov@linaro.org
[DB: changed compatibles per Krzysztof's request]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09 01:07:03 +02:00
Jiasheng Jiang
afe4cb9615 drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and
`hdmi_hpd.c`.

Fixes: c6a57a50ad ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517211/
Link: https://lore.kernel.org/r/20230106023011.3985-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09 00:47:05 +02:00
Masahiro Yamada
b409ea4534 init/version-timestamp.c: remove unneeded #include <linux/version.h>
The kbuild test robot detected this by 'make versioncheck'.

Fixes: 2df8220cc5 ("kbuild: build init/built-in.a just once")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-09 07:34:38 +09:00
Miguel Ojeda
e3c9405ec5 docs: kbuild: remove mention to dropped $(objtree) feature
Commit 8d613a1d04 ("kbuild: drop $(objtree)/ prefix support
for clean-files") dropped support for prefixing with $(objtree).

Thus update the documentation to match that change.

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-09 07:34:37 +09:00
Bjorn Andersson
5d417b4011 drm/msm/dp: Stop using DP id as index in desc
In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.

By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.

While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514397/
Link: https://lore.kernel.org/r/20221207220012.16529-6-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-08 23:51:12 +02:00
Bjorn Andersson
b6f8c4debc dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
Add compatibles for the DisplayPort and Embedded DisplayPort blocks in
Qualcomm SDM845 and SC8280XP platforms.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514408/
Link: https://lore.kernel.org/r/20221207220012.16529-5-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-08 23:51:01 +02:00
Fabien Poussin
e6f2ffeaf5 clk: sunxi-ng: d1: Add CAN bus gates and resets
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221231231429.18357-7-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 22:06:10 +01:00
Samuel Holland
925b61ba2d dt-bindings: clock: Add D1 CAN bus gates and resets
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221231231429.18357-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 22:06:10 +01:00
András Szemző
6ec1c73f1b clk: sunxi-ng: d1: Mark cpux clock as critical
Some SoCs in the D1 family feature ARM CPUs instead of a RISC-V CPU.
In that case, the CPUs are driven from the 'cpux' clock, so it needs
to be marked as critical, since there is no consumer when DVFS is
disabled. This matches the drivers for other SoCs, and the "riscv"
clock in this driver.

Signed-off-by: András Szemző <szemzo.andras@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 22:06:10 +01:00
Samuel Holland
f1404c72b6 clk: sunxi-ng: d1: Allow building for R528/T113
Allwinner released some 32-bit ARM (sun8i) SoCs which use the same CCU
as D1. Allow them to reuse the driver.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 22:06:10 +01:00
Samuel Holland
0ff347db4c clk: sunxi-ng: Move SoC driver conditions to dependencies
Do not duplicate the same expression on the `default` line, so the two
lines do not need to be kept in sync. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.

Three drivers had no conditions.
 - SUN6I_RTC_CCU and SUN8I_DE2_CCU are used on current hardware
   regardless of CPU architecture.
 - SUN8I_R_CCU is only used on pre-H6 SoCs, which means no RISCV SoCs.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 22:06:10 +01:00
Samuel Holland
a26dc096f6 clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
SUNXI_CCU already depends on ARCH_SUNXI, so adding the dependency to
individual SoC drivers is redundant. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 22:06:10 +01:00
Samuel Holland
657f477a89 clk: sunxi-ng: Avoid computing the rate twice
The ccu_*_find_best() functions already compute a best_rate at the same
time as the other factors. Return this value so the caller does not need
to duplicate the computation.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221231173055.42384-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 21:55:17 +01:00
Samuel Holland
5ee541ae71 clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock
The DRAM controller clock is only allowed to change frequency while the
DRAM chips are in self-refresh. To support this, changes to the CLK_DRAM
mux and divider have no effect until acknowledged by the memory dynamic
frequency scaling (MDFS) hardware inside the DRAM controller. (There is
a SDRCLK_UPD bit in DRAM_CFG_REG which should serve a similar purpose,
but this bit actually does nothing.)

However, the MDFS hardware in H3 appears to be broken. Triggering a
frequency change using the procedure from similar SoCs (A64/H5) hangs
the hardware. Additionally, the vendor BSP specifically avoids using the
MDFS hardware on H3, instead performing all DRAM PHY parameter updates
and resets in software.

Thus, it is effectively impossible to change the CLK_DRAM mux/divider,
so those features should not be modeled. Add CLK_SET_RATE_PARENT so
frequency changes apply to PLL_DDR instead.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221229042230.24532-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 21:54:09 +01:00
Yuan Can
f71eaf2708 bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.

Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 21:35:01 +01:00
Randy Dunlap
5dc6470273 clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues
Use '-' to separate the function name and its description.
Use '%' on constants in kernel-doc notation.
Use the kernel-doc Return: format for function return values.

Fixes this warning:
ccu_mmc_timing.c:21: warning: No description found for return value of 'sunxi_ccu_set_mmc_timing_mode'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221122184844.6794-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-08 21:32:26 +01:00
Marijn Suijten
d45e5744ab drm/msm/dpu: Print interrupt index in addition to the mask
The mask only describes the `irq_idx % 32` part, making it generally
impossible to deduce what interrupt is being enabled/disabled.  Since
`debug/core_irq` in debugfs (and other prints) also include the full
`DPU_IRQ_IDX()` value, print the same full value here for easier
correlation instead of only adding the `irq_idx / 32` part.

Furthermore, make the dbgstr messages more consistent.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512460/
Link: https://lore.kernel.org/r/20221121222456.437815-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-08 22:21:08 +02:00
Hui Tang
21e9a838f5 drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init()
Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might
be NULL and will cause null pointer dereference later.

Therefore, it might be better to check it and directly return -ENOMEM.

Fixes: 77b001acdc ("drm/msm/dpu: add the writeback connector layer")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512277/
Link: https://lore.kernel.org/r/20221119055518.179937-1-tanghui20@huawei.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-08 22:18:46 +02:00
Konrad Dybcio
a685d27f22 drm/msm/dpu1: Remove INTF4 IRQ from SDM845 IRQ mask
SDM845 only has INTF0-3 and has no business caring about the INTF4 irq.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/510463/
Link: https://lore.kernel.org/r/20221107103739.8993-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-08 22:15:17 +02:00
Linus Torvalds
1fe4fd6f5c Fixes for 6.2-rc1:
- Remove some incorrect assertions.
  - Fix compiler warnings about variables that could be static.
  - Fix an off by one error when computing the maximum btree height that
    can cause repair failures.
  - Fix the bulkstat-single ioctl not returning the root inode when asked
    to do that.
  - Convey NOFS state to inodegc workers to avoid recursion in reclaim.
  - Fix unnecessary variable initializations.
  - Fix a bug that could result in corruption of the busy extent tree.
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmO29K4ACgkQ+H93GTRK
 tOtzKQ//cOz2OIQoNUnrHCrGEy7hd1HmSwTRfDbJtP6F38b3cygEhXzPBDN5J6+7
 /u/rqAfjmSe/upIjrVJ30agbSoPqSmVBY+P0rGoTCnlbdVLakVy2Cj5NDJO8UrMm
 neqHU7dNZNoCZb8phqS7U7+fUYDgNB9BM9m0b/vaIOwOBYUupvQ3M5DH+claCjDh
 3PNpTmNhuMmQrURB7XlbPQSq9cznGtVwqHu8Q4O1obfxQwlmcbJ/0aJ2asDleeAo
 zPQDZuPxtgISZ3hqpMBD9qZaHY2jEB0TY0FNZJkw01byNDTxvEPEO5jCOK+RJkNJ
 WFi+5Rd+DgxHITiqzL3ks+kv64ATFjyZHScp9JRpU7a6h2zuq2MDnRAUJo5DUxqT
 q6WGrJewmGZE/nSCKezpxH61iR9AiYPcM5m4nX1KXUfQajwCrYyKPRMSijw25Xn4
 rzF5/YQZhEIquzqHhet7kQJgZhmYROzrybaZ4tY8fZPJ3uAQb/sMCE08CgBowmrB
 u7bG+SU7tyX0HkpKNPv8Vnfcd3Fh94k83tEEGHaMY5VEi5GiKaa6w+a90DLRZcOI
 ZGRQG6df7Ot7uMFZftMZxJV9E5Pi7FbrKotUaw7/5SdAYkoAZ4CYzmpGc9KOFmmh
 EffHdkR7ppFxC8EhYjKIWtlSspJZmJqPbqQ1x0FTQCpq0V+FbNY=
 =tWyP
 -----END PGP SIGNATURE-----

Merge tag 'xfs-6.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

 - Remove some incorrect assertions

 - Fix compiler warnings about variables that could be static

 - Fix an off by one error when computing the maximum btree height that
   can cause repair failures

 - Fix the bulkstat-single ioctl not returning the root inode when asked
   to do that

 - Convey NOFS state to inodegc workers to avoid recursion in reclaim

 - Fix unnecessary variable initializations

 - Fix a bug that could result in corruption of the busy extent tree

* tag 'xfs-6.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix extent busy updating
  xfs: xfs_qm: remove unnecessary ‘0’ values from error
  xfs: Fix deadlock on xfs_inodegc_worker
  xfs: get root inode correctly at bulkstat
  xfs: fix off-by-one error in xfs_btree_space_to_height
  xfs: make xfs_iomap_page_ops static
  xfs: don't assert if cmap covers imap after cycling lock
2023-01-08 12:11:45 -06:00
Linus Torvalds
b7bfaa761d Linux 6.2-rc3 v6.2-rc3 2023-01-08 11:49:43 -06:00
Jens Axboe
e6db6f9398 io_uring/io-wq: only free worker if it was allocated for creation
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.

Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-08 10:39:17 -07:00
Aaron Thompson
115d9d77bb mm: Always release pages to the buddy allocator in memblock_free_late().
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.

In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().

For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.

One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.

For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:

v6.2-rc2:
  # grep -E 'Node|spanned|present|managed' /proc/zoneinfo
  Node 0, zone      DMA
          spanned  4095
          present  3999
          managed  3840
  Node 0, zone    DMA32
          spanned  246652
          present  245868
          managed  178867

v6.2-rc2 + patch:
  # grep -E 'Node|spanned|present|managed' /proc/zoneinfo
  Node 0, zone      DMA
          spanned  4095
          present  3999
          managed  3840
  Node 0, zone    DMA32
          spanned  246652
          present  245868
          managed  222816   # +43,949 pages

Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
2023-01-08 18:49:33 +02:00
Takashi Sakamoto
c38d8cff9c ALSA: firewire-lib: code refactoring for cache position in sequence replay
When sequence replay is enabled for media clock recovery, current
implementation refers to cache of sequence descriptors in tx packets, then
fulfil sequence descriptors for rx packets. The initialization for rx
packets is done before starting packet streaming, while it can be postponed
till the cache has enough entries for the replay.

This commit refactors for the purpose as well as minor code change for
renaming of structure member.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-08 15:00:11 +01:00
Takashi Sakamoto
cccddec49c ALSA: firewire-lib: code refactoring for cache position in tx packets
When sequence replay is enabled for media clock recovery, current
implementation caches sequence descriptors from packet descriptors in tx
packets. Helper function for the purpose do not necessarily have good
readability.

This commit refactors relevant functions by renaming structure members,
function name, and function local variables.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-08 15:00:10 +01:00
Takashi Sakamoto
f2bdee856f ALSA: firewire-lib: code refactoring for pool position in rx packets
When scheduling transmission of rx packets, current implementation
fulfils packet descriptors after pooling sequence descriptors. It is for
packet queueing. Besides the implementations do not necessarily have
good readability.

This commit refactors them by adding function local variables and
function arguments.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-08 15:00:09 +01:00
Takashi Sakamoto
119c446a48 ALSA: firewire-lib: code refactoring for helper functions to pool sequence in rx packets
When scheduling transmission of rx packets, current implementation pools
sequence descriptors at first for media clock. Two methods are used for
the purpose depending on four cases, while the implementations do not
necessarily have good readability.

This commit refactors them by adding function pointers and functions
arguments.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-08 15:00:08 +01:00
Linus Torvalds
93928d485d powerpc fixes for 6.2 #2
- Three fixes for various bogosity in our linker script, revealed by the recent commit
    which changed discard behaviour with some toolchains.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmO6jPgTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgCF9D/470zmPnFsEbiMAq+rNCF3xF5kbWhrg
 z/SSaVVC00F6VmHguV6tEbur92j08XFlFE9JGZ3Gj2VW/w79q7Ix6HIBApHsqbOK
 7o6cojDF9KxsBNZf+eAAteFdUdFZC8gg1VX6rIc6xf7Ju9DA1ZaiRqGO+DFnRXSk
 tWngp2otZoUSLpWT9tGkwKHRw+jqtT/2baKG8PPBIBzKEbOEzBOxtraWdv5urm9B
 fTVolMkr/Nk2UuqpMHd+CutP09sQdmMburZWzaxoZ0crB824YoJjMQGEZdeQFzbD
 GERE55vST24iCDKu50o7j1adHdSP+5lkgM2UyFi4LEQYJZ2tKlOR+MhwBv3okNGo
 zFzOObgjbT24e5Bw58G952WR3+25JgZRGgjDH0JXdpVe6peyPx/X9J/GyVeXz/fW
 SnWCYLpLwbSm1jtBtF4TbezxxwHgtHjf7TIlyly6NDJMW3vmhZZy1H5mH+cy41BU
 wbMPhtfcGlPO+GB0ZxAg5pYQoLT6aP/p3n2rwv6fgaIPyLmbrRAGrJ3afZRGkWo0
 7/a11ShvFk1ahNg+kGh0q2ubLO0jlIh3EpwVHldpqWoHjCkiXdNCz3D+R0LUqkw6
 nQLwO4JD0JnhR3o2NtliGEXWhkBlTXdQn+CUC2V0tgvDg0mrRGy1Za9qSfWkd81k
 lYp9bJoBz32MVw==
 =QBMl
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Three fixes for various bogosity in our linker script, revealed
   by the recent commit which changed discard behaviour with some
   toolchains.

* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vmlinux.lds: Don't discard .comment
  powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
  powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT
2023-01-08 06:55:08 -07:00
Olivier Moysan
bfcae956d9 iio: adc: stm32-dfsdm: add id registers support
Add support of identification registers to STM32 DFSDM
to allow hardware capabilities discovery and configuration check.
The number of filters and channels, are read from registers,
when they are available.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20230105125331.328275-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 13:11:03 +00:00
Luca Weiss
14e5b7ab19 iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel
Define the ADC channel used for battery identification purposes so it
can be used in drivers.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-1-82ca8f2db741@fairphone.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 13:03:10 +00:00
Stephan Gerhold
721a2a7edc iio: magnetometer: st_magn: Add LSM303C
The magnetometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS3MDL magnetometer, so just
add the new st,lsm303c-magn compatible for the existing definitions.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 13:01:02 +00:00
Stephan Gerhold
23fd6f0bd6 iio: accel: st_accel: Add LSM303C
The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-accel compatible for the existing definitions.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 13:01:02 +00:00
Stephan Gerhold
4aaf3e4027 dt-bindings: iio: st-sensors: Add LSM303C accelerometer+magnetometer
The ST LSM303C [1] is a accelerometer and magnetometer combo sensor
compatible with the existing ST sensor bindings. Accelerometer and
magnetometer are exposed through separate I2C/SPI devices, so document
separate compatibles with -accel and -magn suffix.

[1]: https://www.st.com/resource/en/datasheet/lsm303c.pdf

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 13:01:02 +00:00
Alexander Vorwerk
eae3e6f1c8 drivers: iio: cdc: Drop redundant if check
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Vorwerk <zabe@avorwerk.net>
Link: https://lore.kernel.org/r/20230105025351.12099-1-zabe@avorwerk.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 12:59:44 +00:00
Vladimir Oltean
c9c1d6d820 iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
The following kernel linkage error:

st_lsm6dsx_core.o: in function `st_lsm6dsx_sw_buffers_setup':
st_lsm6dsx_core.c:2578: undefined reference to `devm_iio_triggered_buffer_setup_ext'

is caused by the fact that the object owning devm_iio_triggered_buffer_setup_ext()
(drivers/iio/buffer/industrialio-triggered-buffer.o) is allowed to be
built as module when its user (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c)
is built-in.

The st_lsm6dsx driver already has a "select IIO_BUFFER", so add another
select for IIO_TRIGGERED_BUFFER, to make that option follow what is set
for the st_lsm6dsx driver. This is similar to what other iio drivers do.

Fixes: 2cfb2180c3 ("iio: imu: st_lsm6dsx: introduce sw trigger support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230103130348.1733467-1-vladimir.oltean@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 12:14:45 +00:00
Andy Shevchenko
591a6bc7f4 iio: adc: max11410: Use asm intead of asm-generic
There is no point to specify asm-generic for the unaligned.h.
Drop the 'generic' suffix and move the inclusion to be after
the non-IIO linux/* ones.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230103144903.39905-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 12:13:09 +00:00
Andy Shevchenko
4b570fe0d4 iio: adc: ti-adc128s052: Sort headers
Sort the headers in alphabetic order in order to ease
the maintenance for this part.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 12:12:10 +00:00
Andy Shevchenko
c87d5e94fc iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() use
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused and code is obfuscated
by ifdeffery.

Drop anti-pattern of ACPI_PTR() use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 12:12:10 +00:00
Andy Shevchenko
d5f0da0c69 iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
The spi_get_device_match_data() helps to get driver data from the
firmware node or SPI ID table. Use it instead of open coding.

While at it, switch ID tables to provide an acrual pointers to
the configuration data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 12:12:10 +00:00
Jonathan Cameron
b7b81d1c65 iio: adc: ep93xx: Enable wider build testing with COMPILE_TEST
It is useful to be able to build this driver without needing
to build support for ARCH_EP93XX.

Also add an explicit dependency on HAS_IOMEM so we have
devm_platform_ioremap_resource() etc available.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20221231144128.489810-1-jic23@kernel.org
2023-01-08 12:04:01 +00:00
Uros Bizjak
4e1da8fe03
posix_acl: Use try_cmpxchg in get_acl
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old
in get_acl. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).

No functional change intended.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-08 12:37:49 +01:00
Linus Torvalds
e9ffbf16ca memblock: small fixes in kernel-doc and tests
* Fix kernel-doc for memblock_phys_free() to use correct names for the
   counterpart allocation methods
 * Fix compilation error in memblock tests
 -----BEGIN PGP SIGNATURE-----
 
 iQFMBAABCAA2FiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmO6bMYYHG1pa2UucmFw
 b3BvcnRAZ21haWwuY29tAAoJEDkDhibLDv2RUt8H/Ayh8cO8kpKbJ2jH9eFwba6T
 JPOv5P3hjKHbY+NMGG9MfAUTMw6Lxa59EiC+xGyPFWrtt/ZpKgaaBznxSC7dkVYy
 XarzK3zulZmL4BdjBQearXXj5gSkZnuEHb9Pjs19GLDnGoRJczoHYG6rXlAWh1sg
 w4H4g4QyHKYqqUlnbDi0GTIaaKY76Uprw6x6w8xwtmdUw9+1edqnoN9fRJxY9AwM
 7ez7FR6rJ5g7AgcLfa/dTaCZgloLPKVdMI+q29lBXM5xDrUpxeEfXg5iU7Hax+rT
 4o43HXGVGyiuWYlgdWd9B18M4Xma55K1Q+cQ3cELsAvq7XACvQcA6xi0QnFfgpU=
 =DNKq
 -----END PGP SIGNATURE-----

Merge tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock

Pull memblock fixes from Mike Rapoport:
 "Small fixes in kernel-doc and tests:

   - Fix kernel-doc for memblock_phys_free() to use correct names for
     the counterpart allocation methods

   - Fix compilation error in memblock tests"

* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Fix doc for memblock_phys_free
  memblock tests: Fix compilation error.
2023-01-08 02:54:24 -08:00
David S. Miller
571f3dd0d0 rxrpc fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmO5PdsACgkQ+7dXa6fL
 C2uy4Q/9HhTnnMngwgxx8c8P/fNFjxLKHUhPeILqhBgestVoWjQXtgM7DWam0V13
 numjNevavZESSbVJFOcP13ul0PcHgkZyOXtjHkSH+P9vZeWX8rC92ANzKLpBOrqK
 lGCBjin9H24dSCFMy5V7cCz23/31jpMAE3SWNd9WDTUe0CjRNWkmB3RNIZupPj2Q
 xTtiy4OGC3KVe/PeduEfvwQ+UXQ0GCP+UaP5aLT06NfW+qPKGRN3JTYli3yq4cbP
 MR2N5CxE6VraphjSWvob/JixOWBAl6VKXrCRXtyYL1iT0c75CDNeTHqSMg19rAKB
 7uBZJD3QgrtmUo07yW3UPK7hZF9/ovlZFnvzbWBSSXCWia+2WW0Ysk9V3TN+TwE2
 mquZRe2M7yxlfwNqGBzjotpHf4AMCMzV50QmW6V3tjhR4KBR2SvUyV9rdQdv0lZh
 Ymq9L776kH9HRkV8WS/JZpHlLJ2Lvjyk3gGstCq9y/HMqB2n/bKFPXcnGdpxRaQC
 ZE94VcQtloLeYCeEMv+FMyg2Pi3GrtRXkQVJqpDTWRfsNpJp5Wlbdm8WSF+QwhWX
 59MLILsnPqjPdcruiL8kSVPI40vBvbnHHJbBaDip2EM+IS4dSCWqoaHyYSoM7/BO
 c6SPcFOkv8syjroudH1XRlH9bnObvSQOVtZE8PDjjsfJrPEpI+Y=
 =iwoA
 -----END PGP SIGNATURE-----

Merge tag 'rxrpc-fixes-20230107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Fix race between call connection, data transmit and call disconnect

Here are patches to fix an oops[1] caused by a race between call
connection, initial packet transmission and call disconnection which
results in something like:

        kernel BUG at net/rxrpc/peer_object.c:413!

when the syzbot test is run.  The problem is that the connection procedure
is effectively split across two threads and can get expanded by taking an
interrupt, thereby adding the call to the peer error distribution list
*after* it has been disconnected (say by the rxrpc socket shutting down).

The easiest solution is to look at the fourth set of I/O thread
conversion/SACK table expansion patches that didn't get applied[2] and take
from it those patches that move call connection and disconnection into the
I/O thread.  Moving these things into the I/O thread means that the
sequencing is managed by all being done in the same thread - and the race
can no longer happen.

This is preferable to introducing an extra lock as adding an extra lock
would make the I/O thread have to wait for the app thread in yet another
place.

The changes can be considered as a number of logical parts:

 (1) Move all of the call state changes into the I/O thread.

 (2) Make client connection ID space per-local endpoint so that the I/O
     thread doesn't need locks to access it.

 (3) Move actual abort generation into the I/O thread and clean it up.  If
     sendmsg or recvmsg want to cause an abort, they have to delegate it.

 (4) Offload the setting up of the security context on a connection to the
     thread of one of the apps that's starting a call.  We don't want to be
     doing any sort of crypto in the I/O thread.

 (5) Connect calls (ie. assign them to channel slots on connections) in the
     I/O thread.  Calls are set up by sendmsg/kafs and passed to the I/O
     thread to connect.  Connections are allocated in the I/O thread after
     this.

 (6) Disconnect calls in the I/O thread.

I've also added a patch for an unrelated bug that cropped up during
testing, whereby a race can occur between an incoming call and socket
shutdown.

Note that whilst this fixes the original syzbot bug, another bug may get
triggered if this one is fixed:

        INFO: rcu detected stall in corrupted
        rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P5792 } 2657 jiffies s: 2825 root: 0x0/T
        rcu: blocking rcu_node structures (internal RCU debug):

It doesn't look this should be anything to do with rxrpc, though, as I've
tested an additional patch[3] that removes practically all the RCU usage
from rxrpc and it still occurs.  It seems likely that it is being caused by
something in the tunnelling setup that the syzbot test does, but there's
not enough info to go on.  It also seems unlikely to be anything to do with
the afs driver as the test doesn't use that.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-07 23:10:33 +00:00
Ben Dooks
43d5f5d636 riscv: dts: sifive: fu740: fix size of pcie 32bit memory
The 32-bit memory resource is needed for non-prefetchable memory
allocations on the PCIe bus, however with some cards (such as the
SM768) the system fails to allocate memory from this.

Checking the allocation against the datasheet, it looks like there
has been a mis-calcualation of the resource for the first memory
region (0x0060090000..0x0070ffffff) which in the data-sheet for
the fu740 (v1p2) is from 0x0060000000..0x007fffffff. Changing
this to allocate from 0x0060090000..0x007fffffff fixes the probing
issues.

Fixes: ae80d51480 ("riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC")
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: stable@vger.kernel.org
Tested-by: Ron Economos <re@w6rz.net> # from IRC
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-01-07 19:31:37 +00:00
Linus Torvalds
9b43a525db NFS client fixes for Linux 6.2
Highlights include:
 
 Bugfixes
 - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
 - Fix a broken coalescing test in the pNFS file layout driver
 - Ensure that the access cache rcu path also applies the login test
 - Fix up for a sparse warning
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESQctxSBg8JpV8KqEZwvnipYKAPIFAmO5s6MACgkQZwvnipYK
 APJ8PA//aVnu+DqLTxeGnyr4HNIcm0su4TetghQabAf0S8nk69Ly8W+N+xCRwwCR
 /PvSe8j51tXVInpYQKSOTjDl8/0mq8cybf6N9DzDS0A+hKQfdK8jvPLU0yj/aZ6u
 D8x17ve7RjzLgw9minltq4eTvVIHpqSh/vVUyQhnj2A8qQlWrboXiQnLQAp5KBbq
 7NexvcajgfFHXm7S+edZ8NH5QZ20FNVskvzyrClp46DQLJcdNLHGJLp8tdeD31kE
 lsNBsLG0LxOFyBY28MbQptXalhBP8RRwYwxdSdIUnExzB7eKTLS6LgHuK9GV+EzL
 wSfRrnyM023momKmdFn3Fy/cRyeF1RwfQON+KAHo1cQ5fFiQS16p7lTELGkApyLc
 yOXGpAvaPJuuBJLM+Xi07ovhqpc7SjGmr7cjZslyasNtez60Le06oSihKnrgcKDx
 ZVh1pTc89O25GqGm161HaQJY9YU4XCtjxPv7rvdrlhO5Dkgxai293R5aXUFBz1dD
 tssv5a2DqIekrE29YaCi/RjIqkngCXHlwniFw/L3/aFRUyHqN9/MyxH5VeCRDI2T
 OJQRR056V1FXSBLH6Wuzs2Ixz2HnJCLR7LE0zAoPLm/RwW8CuNmEXu28jfU0Kcmt
 Hj5VyxYfnqEAGsUO0O2oNhOnxWY9OHvlvpb/9DWcke0ASpeScB4=
 =N6cT
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client fixes from Trond Myklebust:

 - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls

 - Fix a broken coalescing test in the pNFS file layout driver

 - Ensure that the access cache rcu path also applies the login test

 - Fix up for a sparse warning

* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix up a sparse warning
  NFS: Judge the file access cache's timestamp in rcu path
  pNFS/filelayout: Fix coalescing test for single DS
  SUNRPC: ensure the matching upcall is in-flight upon downcall
2023-01-07 10:38:11 -08:00