Add hot plug detect gpio to the HDMI connector.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node names should be generic and DT schema expects certain pattern.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node names should be generic and DT schema expects certain pattern:
imx50-kobo-aura.dtb: gpio-leds: 'on' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
imx6dl-yapp4-draco.dtb: led-controller@30: 'chan@0', 'chan@1', 'chan@2' do not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node names should be generic and DT schema expects certain pattern:
freescale/imx8mm-emcon-avari.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
Remove the now obsolete disable-over-current flag from module-level
device-tree imx8mm-verdin.dtsi and leave it as already mentioned to
the people actually implementing the carrier-board to implement this.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
Remove the now obsolete disable-over-current flag from module-level
device-tree imx6qdl-colibri.dtsi and leave it as already mentioned to
the people actually implementing the carrier-board to implement this.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
Remove the now obsolete disable-over-current flag from module-level
device-tree imx6qdl-apalis.dtsi and leave it as already mentioned to
the people actually implementing the carrier-board to implement this.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following build warning is seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
The imx6qdl-gw560x board does not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
Fixes: b8a559feff ("ARM: dts: imx: add Gateworks Ventana GW5600 support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 8b646cfb84 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard")
Fixes: 6418fd9241 ("ARM: dts: imx7d-pico: Add support for the nymph baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 47246fafef ("ARM: dts: imx6ul-pico: Add support for the dwarf baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'regulator-compatible' is not a valid property according to
nxp,pca9450-regulator.yaml and causes the following warning:
DTC_CHK arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb
...
pmic@25: regulators:LDO1: Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Remove the invalid 'regulator-compatible' property.
Cc: Teresa Remmet <t.remmet@phytec.de>
Fixes: 88f7f6bcca ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add ranges, #address-cells and #size-cells properties to the sram
node to fix the following warnings when checking sram.yaml:
make dtbs_check DT_SCHEMA_FILES=sram.yaml
...
arch/arm/boot/dts/imx51-apf51.dtb: sram@1ffe0000: '#address-cells' is a required property
From schema: Documentation/devicetree/bindings/sram/sram.yaml
arch/arm/boot/dts/imx51-apf51.dtb: sram@1ffe0000: '#size-cells' is a required property
From schema: Documentation/devicetree/bindings/sram/sram.yaml
arch/arm/boot/dts/imx51-apf51.dtb: sram@1ffe0000: 'ranges' is a required property
From schema: Documentation/devicetree/bindings/sram/sram.yaml
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add ranges, #address-cells and #size-cells properties to the sram
node to fix the following warnings when checking sram.yaml:
make dtbs_check DT_SCHEMA_FILES=sram.yaml
...
DTC_CHK arch/arm/boot/dts/imx53-qsb.dtb
arch/arm/boot/dts/imx53-qsb.dtb: sram@f8000000: '#address-cells' is a required property
From schema: Documentation/devicetree/bindings/sram/sram.yaml
/home/fabio/linux-next/arch/arm/boot/dts/imx53-qsb.dtb: sram@f8000000: '#size-cells' is a required property
From schema: Documentation/devicetree/bindings/sram/sram.yaml
/home/fabio/linux-next/arch/arm/boot/dts/imx53-qsb.dtb: sram@f8000000: 'ranges' is a required property
From schema: Documentation/devicetree/bindings/sram/sram.yaml
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit cf7f3f4fa9 ("clk: imx8mp: fix usb_root_clk parent"),
usb_root_clk is no longer for suspend clock so update dts accordingly
to use right bus clock and suspend clock.
Fixes: fb8587a2c1 ("arm64: dtsi: imx8mp: add usb nodes")
Cc: stable@vger.kernel.org # ed1f4ccfe9: clk: imx: imx8mp: add shared clk gate for usb suspend clk
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
NXP internal information shows that the PHY refclk is gated by the
GLOBAL_TX_PIX_CLK_EN bit, so to allow the PHY PLL to lock without the
LCDIF being already active, tie this bit to the HDMI_TX_PHY power
domain.
Fixes: e3442022f5 ("soc: imx: add i.MX8MP HDMI blk-ctrl")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Arthur Simchaev <Arthur.Simchaev@wdc.com> says:
Read any descriptor with a maximum size of QUERY_DESC_MAX_SIZE.
According to the spec the device returns the actual size. Thus can
improve code readability and save CPU cycles. While at it, clean up
few leftovers around the descriptor size parameter.
Link: https://lore.kernel.org/r/1670763911-8695-1-git-send-email-Arthur.Simchaev@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There shouldn't be any restriction of the descriptor size (not the
descriptor id for that matter) up to QUERY_DESC_MAX_SIZE. According to the
spec, the caller can use any descriptor size, and it is up to the device to
return the actual size. Therefore there shouldn't be any sizes hardcoded
in the kernel, nor any need to cache it, hence the
ufshcd_map_desc_id_to_length() function is redundant. Always read the
descriptors with QUERY_DESC_MAX_SIZE size.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Suggested-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
len argument is not used anymore in ufshcd_set_active_icc_lvl() function.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Always read the descriptor with QUERY_DESC_MAX_SIZE. According to the
spec, the device returns the actual size.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We used to use the extended-feature field in the device descriptor as an
indication that the device supported UFS 2.2 or later. Remove that as this
check is specifically done few lines above.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
The patches in this series are a first step towards integrating
support in the upstream kernel for the UFS controller in the Pixel 6
and 7.
[mkp: resolve conflict with RPMB series]
Link: https://lore.kernel.org/r/20221208234358.252031-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify the UFSHCD core to allow 'struct ufshcd_sg_entry' to be
variable-length. The default is the standard length, but variants can
override ufs_hba::sg_entry_size with a larger value if there are
vendor-specific fields following the standard ones.
This is needed to support inline encryption with ufs-exynos (FMP).
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
[ bvanassche: edited commit message and introduced CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for adding an additional ufshcd_clock_scaling_prepare() call with a
different timeout.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wait at most 20 ms before rechecking the doorbells instead of waiting for a
potentially long time between doorbell checks.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
dev_err() statements are better to use than pr_err(), so switch to those.
In a similar vein, the check on the dev_req_params pointer here is not
needed, the two places this function is called never pass in a NULL
pointer, so instead of using dev_err() there just remove it.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This bitmask is unconditionally set in the current driver, so all
conditionals using it can be considered bit rot.
Let's take the current default conditional path everywhere and remove
dbg_print_en from the driver.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current implementation has abstractions that don't give any benefits.
The print_fn callback (and its only callback implementation,
ufs_qcom_dump_regs_wrapper()) was only used by
ufs_qcom_print_hw_debug_reg_all() and just multiplies len by 4 before
calling ufshcd_dump_regs().
ufs_qcom_print_hw_debug_reg_all() is only called by
ufs_qcom_dump_dbg_regs().
There's no real gain in those abstractions, so let's just do the work
directly in ufs_qcom_dump_dbg_regs() (the dbg_register_dump callback).
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This code path is only called through one function, and the HBA struct is
already accessed in ufshcd_vops_dbg_register_dump() prior to calling so
there is no way for it to be NULL.
Likewise, the print_fn callback is always supplied within this driver and
is always provided.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add advanced RPMB support in ufs_bsg:
1. According to the UFS specification, only one RPMB operation can be
performed at any time. We can ensure this by using reserved slot and
its dev_cmd sync operation protection mechanism.
2. For Advanced RPMB, RPMB metadata is packaged in an EHS (Extra Header
Segment) of a command UPIU, and the corresponding reply EHS (from the
device) should also be returned to the user space. bsg_job->request
and bsg_job->reply allow us to pass and return EHS from/back to
userspace.
Compared to normal/legacy RPMB, the advantages of advanced RPMB are:
1. The data length in the Advanced RPMB data read/write command can be
larger than 4KB. For the legacy RPMB, the data length in a single RPMB
data transfer is 256 bytes.
2. All of the advanced RPMB operations will be a single command. For
legacy RPMB, take the read write-counter value as an example, you need
two commands (first SECURITY PROTOCOL OUT, then second SECURITY
PROTOCOL IN).
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need to fill in the total EHS length in UTP Transfer Request Descriptor.
Add this functionality to ufshcd_prepare_req_desc_hdr().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Check UFS Advanced RPMB LU enablement during ufshcd_lu_init().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Take out the "map scatter-gather list to prdt" part of the code in
ufshcd_map_sg() and split it into a new function ufshcd_sgl_to_prdt().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move sg_copy_from_buffer() below its associated case statement.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove checks on job->request_len and job->reply_len because msgcode checks
in a subseqent commit will rule out malicious requests.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the comments in struct ufs_bsg_reply and its usage, the result
should be signed int, not __u32.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at
runtime when the Intel SST-PP (Intel Speed Select Technology -
Performance Profile) level is changed.
Enhance the code to use updated tjmax when programming the thermal
interrupt thresholds.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup the code by using Intel TCC library for TCC (Thermal Control
Circuitry) MSR access.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup the code by using Intel TCC library for TCC (Thermal Control
Circuitry) MSR access.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup the code by using Intel TCC library for TCC (Thermal Control
Circuitry) MSR access.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup the code by using Intel TCC library for TCC (Thermal Control
Circuitry) MSR access.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are several different drivers that accesses the Intel TCC
(thermal control circuitry) MSRs, and each of them has its own
implementation for the same functionalities, e.g. getting the current
temperature, getting the tj_max, and getting/setting the tj_max offset.
Introduce a library to unify the code for Intel CPU TCC MSR access.
At the same time, ensure the temperature is got based on the updated
tjmax value because tjmax can be changed at runtime for cases like
the Intel SST-PP (Intel Speed Select Technology - Performance Profile)
level change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>