1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=PGBg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nYVY
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario
Limonciello).
* acpi-x86:
ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=GkR1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kJMa
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
-----BEGIN PGP SIGNATURE-----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=aZXM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=D6Q8
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.4
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
* tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
Link: https://lore.kernel.org/r/20230414024302.2411985-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Zhaoyang fixes an of_iomap() leak in the STB BIU driver
- Florian removes the bare-metal ARM suspend/resume code which has long
been replaced by the standard PSCI suspend/resume.
-----BEGIN PGP SIGNATURE-----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=ZP5N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xvHb
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.4/drivers' of https://github.com/Broadcom/stblinux into soc/drivers
This pull request contains Broadcom SoCs drivers changes for 6.4, please
pull the following:
- Zhaoyang fixes an of_iomap() leak in the STB BIU driver
- Florian removes the bare-metal ARM suspend/resume code which has long
been replaced by the standard PSCI suspend/resume.
* tag 'arm-soc/for-6.4/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: biuctrl: fix of_iomap leak
soc: bcm: brcmstb: Remove bare-metal ARM suspend/resume code
kbuild, soc: bcm: bcm2835-power: remove MODULE_LICENSE in non-modules
kbuild, soc: bcm: raspberrypi-power: remove MODULE_LICENSE in non-modules
bus: brcmstb_gisb: Use devm_platform_get_and_ioremap_resource()
Link: https://lore.kernel.org/r/20230410232606.1917803-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When the "extra device ports" configuration was first added, the
additional mxp_device_port_connect_info registers were added around the
existing mxp_mesh_port_connect_info registers. What I missed about
CMN-700 is that it shuffled them around to remove this discontinuity.
As such, tweak the definitions and factor out a helper for reading these
registers so we can deal with this discrepancy easily, which does at
least allow nicely tidying up the callsites. With this we can then also
do the nice thing and skip accesses completely rather than relying on
RES0 behaviour where we know the extra registers aren't defined.
Fixes: 23760a0144 ("perf/arm-cmn: Add CMN-700 support")
Reported-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/71d129241d4d7923cde72a0e5b4c8d2f6084525f.1681295193.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently only the first attempt to single-step has any effect. After
that all further stepping remains "stuck" at the same program counter
value.
Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
PSTATE.SS=1 should be set at each step before transferring the PE to the
'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
since the second single-step.
After the first single-step, the PE transferes to the 'Inactive' state,
with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
kernel_active_single_step()=true. Then the PE transferes to the
'Active-pending' state when ERET and returns to the debugger by step
exception.
Before this patch:
==================
Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb>
[0]kdb>
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
is enabled addr at ffffa45c13d09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb>
After this patch:
=================
Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
[1]kdb>
Fixes: 44679a4f14 ("arm64: KGDB: Add step debugging support")
Co-developed-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
So far io_req_complete_post() only covers DEFER_TASKRUN by completing
request via task work when the request is completed from IOWQ.
However, uring command could be completed from any context, and if io
uring is setup with DEFER_TASKRUN, the command is required to be
completed from current context, otherwise wait on IORING_ENTER_GETEVENTS
can't be wakeup, and may hang forever.
The issue can be observed on removing ublk device, but turns out it is
one generic issue for uring command & DEFER_TASKRUN, so solve it in
io_uring core code.
Fixes: e6aeb2721d ("io_uring: complete all requests in task context")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/b3fc9991-4c53-9218-a8cc-5b4dd3952108@kernel.dk/
Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
-----BEGIN PGP SIGNATURE-----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=Bo2w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wYqZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.4
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
* tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
dt-bindings: firmware: document Qualcomm SC8180X SCM
dt-bindings: sram: qcom,imem: document SM6375 IMEM
soc: qcom: icc-bwmon: Handle global registers correctly
soc: qcom: icc-bwmon: Remove unused struct member
soc: qcom: smsm: Use dev_err_probe()
firmware: qcom_scm: Add SM6375 compatible
soc: qcom: llcc: Add configuration data for SM7150
dt-bindings: arm: msm: Add LLCC for SM7150
dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994
soc: qcom: pmic_glink: register ucsi aux device
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
firmware: qcom_scm: Clear download bit during reboot
dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible
dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
firmware: qcom_scm: Use fixed width src vm bitmap
dt-bindings: firmware: qcom,scm: document IPQ5332 SCM
dt-bindings: scm: Add compatible for IPQ9574
soc: qcom: rpmpd: Remove useless comments
...
Link: https://lore.kernel.org/r/20230410152421.4477-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
bcma/main.c uses of_dma_configure() which is declared in of_device.h.
of_device.h gets implicitly included by of_platform.h, but that is going
to be removed soon.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230410232701.1561613-1-robh@kernel.org
Pull MD updates from Song:
"- md/bitmap: Optimal last page size, by Jon Derrick
- Various raid10 fixes, by Yu Kuai and Li Nan
- md: add error_handlers for raid0 and linear, by Mariusz Tkaczyk"
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
md: Move sb writer loop to its own function
md/raid10: Fix typo in comment (replacment -> replacement)
md: make kobj_type structures constant
md/raid10: fix null-ptr-deref in raid10_sync_request
md/raid10: fix task hung in raid10d
Handle them the same way as the devices with 3-4 USB out endpoints.
This is needed for the RTL8192FU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ef4bc66d-84f5-4021-efd7-1787d097519c@gmail.com
Add some new members to rtl8xxxu_fileops and use them instead of
checking priv->rtl_chip.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/e24a5534-6e33-cfb9-0634-0caf4646513f@gmail.com
- Use dev_err_probe() for imx-scu driver to silences EPROBE_DEFER
messages.
- Add LVDS LPI2C and PWM power domains for scu-pd driver.
- A series from Jindong Yue to support module build of imx8m soc driver.
- Update imx8m-blk-ctrl driver to scan child nodes for binding drivers.
- Reorder structure members in imx8m-blk-ctrl driver by following
clang-analyzer suggestion.
- Update imx-weim bus driver to use helper function for "ranges"
parsing.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxG6sUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5k3gf/QJR0kN9aj9AYrkMFYQoIMPGEmBek
2f72o4APQU96hM9bHKcpoEz7lPRlZH6WLip6pZCCEr9SExc2teOsyGEVB33NtNqd
u8AipscSF3Snl2ZCYYwc8hd1RlXdIv/mM0R8CyURjdyE06rW3DN0rTjyf5GH2sYn
HXFgUL5ks5xclINZFyL3tMatuSNGfpB2iGFl10b1BES0jiDYNN1QXNoUbwsKsyQE
FRjRQJXpIo4gJj5hFufxWFODAnk6BZh7CVMM6Ec0J+kLVAzX7X2T3hh6R4TABDGF
yX/M+hH6HpGxhDlOg7To97iMXCS3CR51CDDn+VHtJ9TL1t6pI49aB4un0A==
=UfBF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FNEr
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers update for 6.4:
- Use dev_err_probe() for imx-scu driver to silences EPROBE_DEFER
messages.
- Add LVDS LPI2C and PWM power domains for scu-pd driver.
- A series from Jindong Yue to support module build of imx8m soc driver.
- Update imx8m-blk-ctrl driver to scan child nodes for binding drivers.
- Reorder structure members in imx8m-blk-ctrl driver by following
clang-analyzer suggestion.
- Update imx-weim bus driver to use helper function for "ranges"
parsing.
* tag 'imx-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: reordering the fields
soc: imx8m: Support building imx8m soc driver as module
soc: imx8m: Add MODULE_LICENSE
soc: imx: imx8m-blk-ctrl: Add MODULE_LICENSE
soc: imx: imx8m-blk-ctrl: Use dev_pm_domain_attach_by_name
soc: imx: imx8mp-blk-ctrl: Add MODULE_LICENSE
soc: imx: imx8mp-blk-ctrl: Fix typo of imx8m_blk_ctrl_of_match
soc: imx: imx8mp-blk-ctrl: Use dev_pm_domain_attach_by_name
soc: imx: imx8m-blk-ctrl: Scan subnodes and bind drivers to them
firmware: imx: scu-pd: add missed lvds lpi2c and pwm power domains
bus: imx-weim: Remove open coded "ranges" parsing
firmware: imx: scu: use dev_err_probe
Link: https://lore.kernel.org/r/20230408101928.280271-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add SDIO ids for use with the muRata 1YN (Cypress CYW43439).
The odd thing about this is that the previous 1YN populated
on M.2 card for evaluation purposes had BRCM SDIO vendor ID,
while the chip populated on real hardware has a Cypress one.
The device ID also differs between the two devices. But they
are both 43439 otherwise, so add the IDs for both.
On-device 1YN (43439), the new one, chip label reads "1YN":
```
/sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device
0x04b4
0xbd3d
```
EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4":
```
/sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device
0x02d0
0xa9a6
```
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de
Microchip:
Mailbox controller & client changes for the system controller on
PolarFire SoC. The controller bits have been acked by Jassi.
Primarily the changes work around a "hardware" bug (really the system
controller's software, but it may as well be hardware as customers
cannot change it) where interrupts are not generated if a service fails.
The mailbox controller driver is tweaked to use polling, rather than
interrupt, mode and there are some changes to timeout code required in
the client driver as a result. There's some opportunistic cleanup that I
performed while doing the swap too.
Canaan:
A single fix for some randconfig issues that crop up when !mmu is
enabled for 32-bit kernels, due to my changes in a previous release that
swapped out select based entablement of the driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZC8mSgAKCRB4tDGHoIJi
0pA9AP4hFbaP41qbMdXb4mX4bxCwZxZt9M2+6JZoa1zmNZ7CIAD+Ip8fgHJzpIjC
m0hZ3fmZh/8F+GuOYY1qytEpCkK3Cw0=
=xY/y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5R1cACgkQYKtH/8kJ
Uic/8Q//XzDaRG+IR6IcaYtv8PQd37L83FCYvNCqIBdkWzKa40wTadPzgCnRtaL/
2dUjvNGdDBNPL+EVGiVXEHbDYfQzyjfKZ+gaaVpdGrpY7OnZ7/E1AItFGn1ICeac
OpCai9a05bfm2QCmDt1c9tbHoxzT21Lt2oGnpEmdJa505JUmYUsRrrJ88l71u/9b
ZaoHAwlmE2WaZkYF2fgN6KAWKHHyvDc0ha1E08qZ13Rv8L1n6JblnmJK8PdFeRRN
3/J8cFGOSb+gqjFCGXbYmWhlGmdg+hSxaTRN3jqlKg0Vm4Ck9LNj2+C5FoUl8Va/
vkH2ZBH9ciA2pMBPtilB9mf98IkgeqLwT3M8tQf0NZ2rzkcGBWVQ+9a66rxWWZBf
dq5ML/MtznPsUljJcjR7Jlun8DBpDe01ICpZHR+YVa6jsa+Quepnc0/pyzqnT55Z
8E0L07cktBUvXbIKi+q/GgKV1wbr+0z4x5u63dUPksJxDsM/Fazuxv3wxv7ZcVKK
Ii0Fl9O1SLDA1lXK69rGLF5zKbwulPnA1q2GC5vrfolJWShw0FLO2KSu/mT3s2Ri
tg7m8uIkvEKCVoFlSeX93n/mUEfmFONBPS9HH+rE+BtK00cIoRdJET2IQjkIssN8
Rv+YTIPT1skNAbLPlzE88UZ7Pd3IqpKssKYybt0X2qrISmZo5Yg=
=vLWl
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC drivers for v6.4
Microchip:
Mailbox controller & client changes for the system controller on
PolarFire SoC. The controller bits have been acked by Jassi.
Primarily the changes work around a "hardware" bug (really the system
controller's software, but it may as well be hardware as customers
cannot change it) where interrupts are not generated if a service fails.
The mailbox controller driver is tweaked to use polling, rather than
interrupt, mode and there are some changes to timeout code required in
the client driver as a result. There's some opportunistic cleanup that I
performed while doing the swap too.
Canaan:
A single fix for some randconfig issues that crop up when !mmu is
enabled for 32-bit kernels, due to my changes in a previous release that
swapped out select based entablement of the driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: mpfs: add a prefix to rx_callback()
soc: microchip: mpfs: handle timeouts and failed services differently
soc: microchip: mpfs: simplify error handling in mpfs_blocking_transaction()
soc: microchip: mpfs: use a consistent completion timeout
soc: microchip: mpfs: fix some horrible alignment
mailbox: mpfs: check the service status in .tx_done()
mailbox: mpfs: ditch a useless busy check
mailbox: mpfs: switch to txdone_poll
mailbox: mpfs: fix an incorrect mask width
soc: canaan: Make K210_SYSCTL depend on CLK_K210
Link: https://lore.kernel.org/r/20230406-islamist-mop-81d651b8830d@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use primary channel index to determine which 5 MHz mask should be enable.
This mask is used to prevent noise from channel edge to effect CCA
threshold in wide bandwidth (>= 40 MHZ).
Fixes: 1b00e9236a ("rtw89: 8852c: add set channel of BB part")
Fixes: 6b0698984e ("wifi: rtw89: 8852b: add chip_ops::set_channel")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230406072841.8308-1-pkshih@realtek.com
These tables contain BB and RF parameters that driver will load them into
registers. It also contains TX power according to country, band, rate and
so on. Increasing thermal can cause TX power degraded, so power tracking
tables are defined to compensate TX power.
Internal version of these tables:
- HALBB_029_106_15 (V17)
- HALRF_029_00_089
* Radio A 0x22
* NCTL 0x5
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230401142548.55466-3-pkshih@realtek.com
These tables contain BB and RF parameters that driver will load them into
registers. It also contains TX power according to country, band, rate and
so on. Increasing thermal can cause TX power degraded, so power tracking
tables are defined to compensate TX power.
Internal version of these tables:
- HALBB_029_106_15 (V17)
- HALRF_029_00_089
* Radio A 0x22
* NCTL 0x5
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230401142548.55466-2-pkshih@realtek.com
Many settings of 8851B are the same as 8852B or 8852A, like DLE (Data link
engine), security engine and so on. Update them according to hardware
design.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330133324.19538-4-pkshih@realtek.com
For two RF paths chips, we normally set path B as main path by default.
8851B has single one RF path, so set TX path to A and set mapping of
path B to 0.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330133324.19538-3-pkshih@realtek.com
The chip contains digital and analog parts, and each of them has its own
version number. This is used by BT coexistence mechanism to make strategy
decision for different analog version.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330133324.19538-2-pkshih@realtek.com
Turn on hardware CFO (central frequency offset) compensation based on IC
capability, and improve digital CFO compensation accuracy by using
more fixed points number.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330132352.13647-1-pkshih@realtek.com
One chip can have different RFE (RF front end) types which we will judge
at runtime. And, different RFE types may use different RF parameter tables.
Though we didn't really meet this case previously, we are going to meet it
on upcoming chip RTL8851B. So, this commit handles parameter tables for
runtime RFE type.
We now encapsulate rtw89_txpwr_rule_<2/5/6>ghz tables into rtw89_rfe_parms.
Then, each chip defines its default parameter tables, and if needed, it can
configure extra parameter tables by RFE type. Finally we determine runtime
parameter tables by RFE type if one is configured. Otherwise, we use the
default parameter tables.
For now, we just move all settings under default parameter tables. We will
configure parameter tables by RFE types in separate commits afterwards.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330080331.37155-1-pkshih@realtek.com
This contains minor fixes and cleanups. Note that one of the patches
here includes ARM firmware changes, but I picked that up after checking
with Sudeep and Rob because it didn't seem worth splitting it up any
further.
-----BEGIN PGP SIGNATURE-----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=xTHK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3Yhy
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.4-rc1
This contains minor fixes and cleanups. Note that one of the patches
here includes ARM firmware changes, but I picked that up after checking
with Sudeep and Rob because it didn't seem worth splitting it up any
further.
* tag 'tegra-for-6.4-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: Use of_property_present() for testing DT property presence
firmware: tegra: bpmp: Fix error paths in debugfs
Link: https://lore.kernel.org/r/20230406124804.970394-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains various minor cleanups and fixes as well as support for several
more wake events on Tegra234.
-----BEGIN PGP SIGNATURE-----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=lDCY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CjZi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.4-rc1
Contains various minor cleanups and fixes as well as support for several
more wake events on Tegra234.
* tag 'tegra-for-6.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
soc/tegra: pmc: Support software wake-up for SPE
soc/tegra: pmc: Add wake source interrupt for MGBE
soc/tegra: pmc: Add the PMIC wake event for Tegra234
soc/tegra: bpmp: Actually free memory on error path
soc/tegra: cbb: remove linux/version.h
Link: https://lore.kernel.org/r/20230406124804.970394-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the discuss threads [1] [2], new firmware format break user space
because older drivers can't recognize new firmware format. To avoid this,
the new format will be named rtw89/rtw8852b_fw-1.bin and only new driver
try to load it. Old drivers only load original and understandable firmware
rtw89/rtw8852b_fw.bin.
More, new driver will be still backward compatible with old firmware, so
original firmware can be used by new driver.
If there is newer firmware format is introduced, rtw89/rtw8852b_fw-2.bin
will be given. The same rules will be applied like above. So, we will have
firmware like below in linux-firmware in the future.
rtw89/rtw8852b_fw-2.bin
rtw89/rtw8852b_fw-1.bin
rtw89/rtw8852b_fw.bin
After this patch, MODULE_FIRMWARE() of 8852A/B/C become
rtw89/rtw8852a_fw.bin
rtw89/rtw8852b_fw-1.bin
rtw89/rtw8852c_fw.bin
[1] https://lore.kernel.org/linux-wireless/df1ce994-3368-a57e-7078-8bdcccf4a1fd@gmail.com/T/#m24cb43be31a762d0ea70bf07f27ae96c59f6931b
[2] https://bugzilla.kernel.org/show_bug.cgi?id=217207
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320130606.20777-4-pkshih@realtek.com
Since we are going to load more than one firmware and some are not
presented or optional, using asynchronous API request_firmware_nowait()
will become complicated. Also, we want to use firmware_request_nowarn()
to avoid warning messages when loading optional files. So, use
schedule_work to be simpler.
To abstract loading a firmware or file, define a struct rtw89_fw_req_info
containing a struct firmware and a completion to ensure this firmware is
loaded completely.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320130606.20777-3-pkshih@realtek.com
In early feature bitmap obtained from rtw89_early_fw_feature_recognize(),
the bits needed to check get increased. It's more friendly to work with
RTW89_CHK_FW_FEATURE(). So, we concentrate the flow of iterating FW feature
configures and calling RTW89_SET_FW_FEATURE() for various uses. And then,
we adjust rtw89_early_fw_feature_recognize() for RTW89_CHK_FW_FEATURE().
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320130606.20777-2-pkshih@realtek.com
This contains a single commit to drop MODULE_LICENSE() from a driver
that can't be built as a module since that can now confuse tooling.
-----BEGIN PGP SIGNATURE-----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=LKp/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=k9qX
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
ARM: tegra: Core changes for v6.4-rc1
This contains a single commit to drop MODULE_LICENSE() from a driver
that can't be built as a module since that can now confuse tooling.
* tag 'tegra-for-6.4-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove MODULE_LICENSE in non-modules
Link: https://lore.kernel.org/r/20230406124804.970394-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just one bugfix and one improvement to how forwarded syslogs are sent to
dmesg.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCZC5yjgAKCRAd+FPLCI8z
YnjIAPwLA3EmD7ZGkGN9HXeY1zQ777FSuOgnWCqr5YJtSYg/ogD/TlLSafLhjWIP
jqiGJ/v0qfNqgb80T6n4eDJ4rtz4+AY=
=ESHf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yLnT
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-6.4' of https://github.com/AsahiLinux/linux into soc/drivers
Apple SoC RTKit updates for 6.4.
Just one bugfix and one improvement to how forwarded syslogs are sent to
dmesg.
* tag 'asahi-soc-rtkit-6.4' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Crop syslog messages
soc: apple: rtkit: Fix buffer address field width
Link: https://lore.kernel.org/r/0dbd2dc1-6a2c-5b21-354b-d8314937e8e7@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We used to store operating channel info after associated. However, scan
might happen before that. Without switching back to operating channel,
authentication or association might fail. Therefore, we switch back to
operating channel when the scanning vif's BSSID is non-zero, which
implies connected or during attempt to connect.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-6-pkshih@realtek.com
Use POWER_ON flag to make sure power on/off is symmetric. Since both
remain_on_channel and hw_scan both alter the power state, this makes
sure that we don't enter/leave IPS mode twice.
Also, replace IPS related functions with inline function that does
similar logic so we can track it more easily.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-5-pkshih@realtek.com
Add support of remain on channel ops. Since channel context is
required to enable multi-channel concurrent(MCC) and the current
ROC in mac80211 don't support more than 1 channel context, add this
to let P2P and other protocols relying on this work as expected.
The off-channel duration and cancel timing is purely controlled by
upper layers.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-4-pkshih@realtek.com
Allocate a per-skb completion to track those skbs we are interested in
and wait for them to complete transmission with TX status.
Normally, the completion object is freed by wait side, but it could be
timeout result that complete side should free the object instead. Add a
owner field with RCU to determine which side should free the object.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-3-pkshih@realtek.com
Adding this supports beacon filter and connection quality monitor.
To make host CPU wake up less, let firmware perform signal
monitoring and beacon processing, then notify driver upon signal
changes or beacon loss.
This feature needs firmware 0.27.56 or newer to support it.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-2-pkshih@realtek.com
please pull the following:
- Rob makes use of the of_address_to_resource() helper instead of open
coding it in the Kona SMC code.
-----BEGIN PGP SIGNATURE-----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=xsFP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iU7z
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux into soc/arm
This pull request contains ARM-based platform code changes for 6.4,
please pull the following:
- Rob makes use of the of_address_to_resource() helper instead of open
coding it in the Kona SMC code.
* tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux:
ARM: bcm: Use of_address_to_resource()
Link: https://lore.kernel.org/r/20230410232606.1917803-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Use of_cpu_node_to_id() to read CPU node 'reg'.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO7RwAKCRCKwlD9ZEnx
cN5MAP96emLuyEeV2srYuaCTWhPRuJ8ze0gSyoRiMHNJz4EWOwD+Ii2AswTIWhwU
D6mJcLY5fqUTin9sdboT3S18gHJlFAw=
=B76T
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=o8j1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/arm
Renesas ARM SoC updates for v6.4
- Use of_cpu_node_to_id() to read CPU node 'reg'.
* tag 'renesas-arm-soc-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: sh-mobile: Use of_cpu_node_to_id() to read CPU node 'reg'
Link: https://lore.kernel.org/r/cover.1681113113.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of changes from Oleksij Rempel which make it possible
to configure Ethernet refclock from device tree.
- Use common DT helpers to test DT property presence and read boolean
properties.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxHpoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7V+AgArHo+ztgKv4vCde0GanzBpRmxdJRd
oE/DJzIXgbWM4yajJm25x7LQV02atxU2+ssw17/x/Ac2xMXg6NPkBrqXlyylbJQG
+a8k/qX7pBipM3vjlIxJGBf3+BNCYDP/QPRemSQzmOY8kydGfympT0Ck/kuWsEca
FsAe77W4WpcEBQcB/dj5D33K+kr6bkkEwm1Ip07taR1KFUpFNB3FV7CD8rXa1LHn
SyFxk5SfdQZhuCArwZwUQjc6ZxJInECG8PBqfMSGOX/ueoByAY5I4GHB4GWRv0BD
j7N2C/Eg9hvbKWJ+ErlPuqB/H2gVhncAYIwHzdlKyZTN3jN/ztuQ7JQhTg==
=MjV8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G9TP
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC changes for 6.4:
- A couple of changes from Oleksij Rempel which make it possible
to configure Ethernet refclock from device tree.
- Use common DT helpers to test DT property presence and read boolean
properties.
* tag 'imx-soc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Use of_property_read_bool() for boolean properties
ARM: mxs: Use of_property_present() for testing DT property presence
ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite
ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is present
Link: https://lore.kernel.org/r/20230408101928.280271-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
