Commit graph

1,187,593 commits

Author SHA1 Message Date
Alexis Lothoré
7a2dd00be8 net: dsa: mv88e6xxx: use mv88e6xxx_phy_is_internal in mv88e6xxx_port_ppu_updates
Make sure to use existing helper to get internal PHYs count instead of
redoing it manually

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
ca34593190 net: dsa: mv88e6xxx: pass directly chip structure to mv88e6xxx_phy_is_internal
Since this function is a simple helper, we do not need to pass a full
dsa_switch structure, we can directly pass the mv88e6xxx_chip structure.
Doing so will allow to share this function with any other function
not manipulating dsa_switch structure but needing info about number of
internal phys

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Alexis Lothoré
9229a9483d dt-bindings: net: dsa: marvell: add MV88E6361 switch to compatibility list
Marvell MV88E6361 is an 8-port switch derived from the
88E6393X/88E9193X/88E6191X switches family. Since its functional behavior
is very close to switches from this family, it can benefit from existing
drivers for this family, so add it to the list of compatible switches

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:54:33 -07:00
Jakub Kicinski
e180a33cf4 Merge branch 'add-layer-2-miss-indication-and-filtering'
Ido Schimmel says:

====================
Add layer 2 miss indication and filtering

tl;dr
=====

This patchset adds a single bit to the tc skb extension to indicate that
a packet encountered a layer 2 miss in the bridge and extends flower to
match on this metadata. This is required for non-DF (Designated
Forwarder) filtering in EVPN multi-homing which prevents decapsulated
BUM packets from being forwarded multiple times to the same multi-homed
host.

Background
==========

In a typical EVPN multi-homing setup each host is multi-homed using a
set of links called ES (Ethernet Segment, i.e., LAG) to multiple leaf
switches in a rack. These switches act as VTEPs and are not directly
connected (as opposed to MLAG), but can communicate with each other (as
well as with VTEPs in remote racks) via spine switches over L3.

When a host sends a BUM packet over ES1 to VTEP1, the VTEP will flood it
to other VTEPs in the network, including those connected to the host
over ES1. The receiving VTEPs must drop the packet and not forward it
back to the host. This is called "split-horizon filtering" (SPH) [1].

FRR configures SPH filtering using two tc filters. The first, an ingress
filter that matches on packets received from VTEP1 and marks them using
a fwmark (firewall mark). The second, an egress filter configured on the
LAG interface connected to the host that matches on the fwmark and drops
the packets. Example:

 # tc filter add dev vxlan0 ingress pref 1 proto all flower enc_src_ip $VTEP1_IP action skbedit mark 101
 # tc filter add dev bond0 egress pref 1 handle 101 fw action drop

Motivation
==========

For each ES, only one VTEP is elected by the control plane as the DF.
The DF is responsible for forwarding decapsulated BUM traffic to the
host over the ES. The non-DF VTEPs must drop such traffic as otherwise
the host will receive multiple copies of BUM traffic. This is called
"non-DF filtering" [2].

Filtering of multicast and broadcast traffic can be achieved using the
following flower filter:

 # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop

Unlike broadcast and multicast traffic, it is not currently possible to
filter unknown unicast traffic. The classification into unknown unicast
is performed by the bridge driver, but is not visible to other layers.

Implementation
==============

The proposed solution is to add a single bit to the tc skb extension
that is set by the bridge for packets that encountered an FDB or MDB
miss. The flower classifier is extended to be able to match on this new
metadata bit in a similar fashion to existing metadata options such as
'indev'.

A bit that is set for every flooded packet would also work, but it does
not allow us to differentiate between registered and unregistered
multicast traffic which might be useful in the future.

A relatively generic name is chosen for this bit - 'l2_miss' - to allow
its use to be extended to other layer 2 devices such as VXLAN, should a
use case arise.

With the above, the control plane can implement a non-DF filter using
the following tc filters:

 # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop
 # tc filter add dev bond0 egress pref 2 proto all flower indev vxlan0 l2_miss true action drop

The first drops broadcast and multicast traffic and the second drops
unknown unicast traffic.

Testing
=======

A test exercising the different permutations of the 'l2_miss' bit is
added in patch #8.

Patchset overview
=================

Patch #1 adds the new bit to the tc skb extension and sets it in the
bridge driver for packets that encountered a miss. The marking of the
packets and the use of this extension is protected by the
'tc_skb_ext_tc' static key in order to keep performance impact to a
minimum when the feature is not in use.

Patch #2 extends the flow dissector to dissect this information from the
tc skb extension into the 'FLOW_DISSECTOR_KEY_META' key.

Patch #3 extends the flower classifier to be able to match on the new
layer 2 miss metadata. The classifier enables the 'tc_skb_ext_tc' static
key upon the installation of the first filter that matches on 'l2_miss'
and disables the key upon the removal of the last filter that matches on
it.

Patch #4 rejects matching on the new metadata in drivers that already
support the 'FLOW_DISSECTOR_KEY_META' key.

Patches #5-#6 are small preparations in mlxsw.

Patch #7 extends mlxsw to be able to match on layer 2 miss.

Patch #8 adds a selftest.

iproute2 patches can be found here [3].

[1] https://datatracker.ietf.org/doc/html/rfc7432#section-8.3
[2] https://datatracker.ietf.org/doc/html/rfc7432#section-8.5
[3] https://github.com/idosch/iproute2/tree/submit/non_df_filter_v1
[4] https://lore.kernel.org/netdev/20230518113328.1952135-1-idosch@nvidia.com/
[5] https://lore.kernel.org/netdev/20230509070446.246088-1-idosch@nvidia.com/
====================

Link: https://lore.kernel.org/r/20230529114835.372140-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:02 -07:00
Ido Schimmel
8c33266ae2 selftests: forwarding: Add layer 2 miss test cases
Add test cases to verify that the bridge driver correctly marks layer 2
misses only when it should and that the flower classifier can match on
this metadata.

Example output:

 # ./tc_flower_l2_miss.sh
 TEST: L2 miss - Unicast                                             [ OK ]
 TEST: L2 miss - Multicast (IPv4)                                    [ OK ]
 TEST: L2 miss - Multicast (IPv6)                                    [ OK ]
 TEST: L2 miss - Link-local multicast (IPv4)                         [ OK ]
 TEST: L2 miss - Link-local multicast (IPv6)                         [ OK ]
 TEST: L2 miss - Broadcast                                           [ OK ]

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:01 -07:00
Ido Schimmel
caa4c58ab5 mlxsw: spectrum_flower: Add ability to match on layer 2 miss
Add the 'fdb_miss' key element to supported key blocks and make use of
it to match on layer 2 miss.

The key is only supported on Spectrum-{2,3,4}. An error is returned for
Spectrum-1 since the key element is not present in any of its key
blocks.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
0b9cd74b8d mlxsw: spectrum_flower: Do not force matching on iif
Currently, mlxsw only supports the 'ingress_ifindex' field in the
'FLOW_DISSECTOR_KEY_META' key, but subsequent patches are going to add
support for the 'l2_miss' field as well. It is valid to only match on
'l2_miss' without 'ingress_ifindex', so do not force matching on it.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
d04e265096 mlxsw: spectrum_flower: Split iif parsing to a separate function
Currently, mlxsw only supports the 'ingress_ifindex' field in the
'FLOW_DISSECTOR_KEY_META' key, but subsequent patches are going to add
support for the 'l2_miss' field as well. Split the parsing of the
'ingress_ifindex' field to a separate function to avoid nesting. No
functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
f4356947f0 flow_offload: Reject matching on layer 2 miss
Adjust drivers that support the 'FLOW_DISSECTOR_KEY_META' key to reject
filters that try to match on the newly added layer 2 miss field. Add an
extack message to clearly communicate the failure reason to user space.

The following users were not patched:

1. mtk_flow_offload_replace(): Only checks that the key is present, but
   does not do anything with it.
2. mlx5_tc_ct_set_tuple_match(): Used as part of netfilter offload,
   which does not make use of the new field, unlike tc.
3. get_netdev_from_rule() in nfp: Likewise.

Example:

 # tc filter add dev swp1 egress pref 1 proto all flower skip_sw l2_miss true action drop
 Error: mlxsw_spectrum: Can't match on "l2_miss".
 We have an error talking to the kernel

Acked-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
1a432018c0 net/sched: flower: Allow matching on layer 2 miss
Add the 'TCA_FLOWER_L2_MISS' netlink attribute that allows user space to
match on packets that encountered a layer 2 miss. The miss indication is
set as metadata in the tc skb extension by the bridge driver upon FDB or
MDB lookup miss and dissected by the flow dissector to the
'FLOW_DISSECTOR_KEY_META' key.

The use of this skb extension is guarded by the 'tc_skb_ext_tc' static
key. As such, enable / disable this key when filters that match on layer
2 miss are added / deleted.

Tested:

 # cat tc_skb_ext_tc.py
 #!/usr/bin/env -S drgn -s vmlinux

 refcount = prog["tc_skb_ext_tc"].key.enabled.counter.value_()
 print(f"tc_skb_ext_tc reference count is {refcount}")

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 0

 # tc filter add dev swp1 egress proto all handle 101 pref 1 flower src_mac 00:11:22:33:44:55 action drop
 # tc filter add dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:11:22:33:44:55 l2_miss true action drop
 # tc filter add dev swp1 egress proto all handle 103 pref 3 flower src_mac 00:11:22:33:44:55 l2_miss false action drop

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 2

 # tc filter replace dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:01:02:03:04:05 l2_miss false action drop

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 2

 # tc filter del dev swp1 egress proto all handle 103 pref 3 flower
 # tc filter del dev swp1 egress proto all handle 102 pref 2 flower
 # tc filter del dev swp1 egress proto all handle 101 pref 1 flower

 # ./tc_skb_ext_tc.py
 tc_skb_ext_tc reference count is 0

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
d5ccfd90df flow_dissector: Dissect layer 2 miss from tc skb extension
Extend the 'FLOW_DISSECTOR_KEY_META' key with a new 'l2_miss' field and
populate it from a field with the same name in the tc skb extension.
This field is set by the bridge driver for packets that incur an FDB or
MDB miss.

The next patch will extend the flower classifier to be able to match on
layer 2 misses.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Ido Schimmel
7b4858df3b skbuff: bridge: Add layer 2 miss indication
For EVPN non-DF (Designated Forwarder) filtering we need to be able to
prevent decapsulated traffic from being flooded to a multi-homed host.
Filtering of multicast and broadcast traffic can be achieved using the
following flower filter:

 # tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop

Unlike broadcast and multicast traffic, it is not currently possible to
filter unknown unicast traffic. The classification into unknown unicast
is performed by the bridge driver, but is not visible to other layers
such as tc.

Solve this by adding a new 'l2_miss' bit to the tc skb extension. Clear
the bit whenever a packet enters the bridge (received from a bridge port
or transmitted via the bridge) and set it if the packet did not match an
FDB or MDB entry. If there is no skb extension and the bit needs to be
cleared, then do not allocate one as no extension is equivalent to the
bit being cleared. The bit is not set for broadcast packets as they
never perform a lookup and therefore never incur a miss.

A bit that is set for every flooded packet would also work for the
current use case, but it does not allow us to differentiate between
registered and unregistered multicast traffic, which might be useful in
the future.

To keep the performance impact to a minimum, the marking of packets is
guarded by the 'tc_skb_ext_tc' static key. When 'false', the skb is not
touched and an skb extension is not allocated. Instead, only a
5 bytes nop is executed, as demonstrated below for the call site in
br_handle_frame().

Before the patch:

```
        memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
  c37b09:       49 c7 44 24 28 00 00    movq   $0x0,0x28(%r12)
  c37b10:       00 00

        p = br_port_get_rcu(skb->dev);
  c37b12:       49 8b 44 24 10          mov    0x10(%r12),%rax
        memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
  c37b17:       49 c7 44 24 30 00 00    movq   $0x0,0x30(%r12)
  c37b1e:       00 00
  c37b20:       49 c7 44 24 38 00 00    movq   $0x0,0x38(%r12)
  c37b27:       00 00
```

After the patch (when static key is disabled):

```
        memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
  c37c29:       49 c7 44 24 28 00 00    movq   $0x0,0x28(%r12)
  c37c30:       00 00
  c37c32:       49 8d 44 24 28          lea    0x28(%r12),%rax
  c37c37:       48 c7 40 08 00 00 00    movq   $0x0,0x8(%rax)
  c37c3e:       00
  c37c3f:       48 c7 40 10 00 00 00    movq   $0x0,0x10(%rax)
  c37c46:       00

#ifdef CONFIG_HAVE_JUMP_LABEL_HACK

static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
{
        asm_volatile_goto("1:"
  c37c47:       0f 1f 44 00 00          nopl   0x0(%rax,%rax,1)
        br_tc_skb_miss_set(skb, false);

        p = br_port_get_rcu(skb->dev);
  c37c4c:       49 8b 44 24 10          mov    0x10(%r12),%rax
```

Subsequent patches will extend the flower classifier to be able to match
on the new 'l2_miss' bit and enable / disable the static key when
filters that match on it are added / deleted.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:37:00 -07:00
Zhengchao Shao
36eec020fa net: sched: fix NULL pointer dereference in mq_attach
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq

The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178

This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.

Fixes: 6ec1c69a8f ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:40 -07:00
Jakub Kicinski
bb50f12c69 Merge branch 'net-sched-fixes-for-sch_ingress-and-sch_clsact'
Peilin Ye says:

====================
net/sched: Fixes for sch_ingress and sch_clsact

These are v6 fixes for ingress and clsact Qdiscs, including only first 4
patches (already tested and reviewed) from v5.  Patch 5 and 6 from
previous versions are still under discussion and will be sent separately.

[a] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b

Link to v5: https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/
Link to v4: https://lore.kernel.org/r/cover.1684825171.git.peilin.ye@bytedance.com/
Link to v3 (incomplete): https://lore.kernel.org/r/cover.1684821877.git.peilin.ye@bytedance.com/
Link to v2: https://lore.kernel.org/r/cover.1684796705.git.peilin.ye@bytedance.com/
Link to v1: https://lore.kernel.org/r/cover.1683326865.git.peilin.ye@bytedance.com/
====================

Link: https://lore.kernel.org/r/cover.1685388545.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:06 -07:00
Peilin Ye
9de95df5d1 net/sched: Prohibit regrafting ingress or clsact Qdiscs
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:

  $ ip link add ifb0 type ifb
  $ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
  $ tc qdisc add dev ifb0 clsact
  $ tc qdisc link dev ifb0 handle ffff: parent 1:1
  $ tc qdisc show dev ifb0
  qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
  qdisc clsact ffff: parent ffff:fff1 refcnt 2
                                      ^^^^^^^^

clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.

ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT).  Prohibit regrafting them.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:05 -07:00
Peilin Ye
f85fa45d4a net/sched: Reserve TC_H_INGRESS (TC_H_CLSACT) for ingress (clsact) Qdiscs
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):

  $ ip link add name ifb0 type ifb
  $ tc qdisc add dev ifb0 parent ffff:fff1 htb
  $ tc qdisc add dev ifb0 clsact
  Error: Exclusivity flag on, cannot modify.
  $ drgn
  ...
  >>> ifb0 = netdev_get_by_name(prog, "ifb0")
  >>> qdisc = ifb0.ingress_queue.qdisc_sleeping
  >>> print(qdisc.ops.id.string_().decode())
  htb
  >>> qdisc.flags.value_() # TCQ_F_INGRESS
  2

Only allow ingress and clsact Qdiscs under ffff:fff1.  Return -EINVAL
for everything else.  Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:05 -07:00
Peilin Ye
5eeebfe6c4 net/sched: sch_clsact: Only create under TC_H_CLSACT
clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS).  Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.

Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:05 -07:00
Peilin Ye
c7cfbd1150 net/sched: sch_ingress: Only create under TC_H_INGRESS
ingress Qdiscs are only supposed to be created under TC_H_INGRESS.
Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to
mq_init().

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 23:31:04 -07:00
Uday Shankar
c7275ce6a5 nvme: improve handling of long keep alives
Upon keep alive completion, nvme_keep_alive_work is scheduled with the
same delay every time. If keep alive commands are completing slowly,
this may cause a keep alive timeout. The following trace illustrates the
issue, taking KATO = 8 and TBKAS off for simplicity:

1. t = 0: run nvme_keep_alive_work, send keep alive
2. t = ε: keep alive reaches controller, controller restarts its keep
          alive timer
3. t = 4: host receives keep alive completion, schedules
          nvme_keep_alive_work with delay 4
4. t = 8: run nvme_keep_alive_work, send keep alive

Here, a keep alive having RTT of 4 causes a delay of at least 8 - ε
between the controller receiving successive keep alives. With ε small,
the controller is likely to detect a keep alive timeout.

Fix this by calculating the RTT of the keep alive command, and adjusting
the scheduling delay of the next keep alive work accordingly.

Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-05-30 20:57:42 -07:00
Linus Torvalds
48b1320a67 for-6.4-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmR2TDwACgkQxWXV+ddt
 WDsMvQ/+KgUXW+Liu5BaOyD5UzPL4BgHWiPTmJyRpsWTkGm8LE/yRCRoxqp1XbU+
 nOjQpjkxI+ziRgKpDTAGFK/w51TV9ECM5wyZiXx93TO6iaTOuYCtSnSsWylzEC1H
 q9I3znLJSWrnBPTktwTZ29rvKvXj1k3th8ypyI9ho7N+3H0Uzt2VIPxrH2oVXZNz
 f2vkjSX9pKGN5zxM2ahd3Nde4Ma6yAlJLD+pnlYK20zH/30cAXdJsUCsUqQLXDL1
 sUR++Br7qym3Wqn9Qa5R71IPJ1FieW2NaHgAz4dBBFfqe5PR7YCGL/Md6G+CFJ1E
 qLLFOWpELpqkeQdvivBnMZWqgpw+54Pdfuqxg7VylEmUc1y6CK4ab5XctpXIf75h
 6bK0RPZ7D9jZl6JukkWftoS4XnW2cseyEfHneDMZDty4v1bxwR6g7i4ZTym413Gx
 Td1Z+G6BN5O5ih0Pc0CgSS3QnndWTUl3LAHiuxRErrK4dxpeuQlDTGWWY7YVyRPJ
 O9yC24GbHyWYBYHtNACEn6/GlXQjtswhjlHxqONmQfnstZL7Fz8si9EQEOWwssJE
 PIlb022a1mvR42yHr64TE0SzpDZbMY8mnULAsSrWgPXh3IAt1ztUuJajcFs84MZr
 qWewi4F/3wDAB0m1lUbAOmeBbpAw5gSGHhwBrjdK3EWJr2kxQ50=
 =viyP
 -----END PGP SIGNATURE-----

Merge tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "One bug fix and two build warning fixes:

   - call proper end bio callback for metadata RAID0 in a rare case of
     an unaligned block

   - fix uninitialized variable (reported by gcc 10.2)

   - fix warning about potential access beyond array bounds on mips64
     with 64k pages (runtime check would not allow that)"

* tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix csum_tree_block page iteration to avoid tripping on -Werror=array-bounds
  btrfs: fix an uninitialized variable warning in btrfs_log_inode
  btrfs: call btrfs_orig_bbio_end_io in btrfs_end_bio_work
2023-05-30 17:23:50 -04:00
Linus Torvalds
afead42fdf perf tools fixes for v6.4: 2nd batch
- Fix BPF CO-RE naming convention for checking the availability of fields on
   'union perf_mem_data_src' on the running kernel.
 
 - Remove the use of llvm-strip on BPF skel object files, not needed, fixes a
   build breakage when the llvm package, that contains it in most distros, isn't
   installed.
 
 - Fix tools that use both evsel->{bpf_counter_list,bpf_filters}, removing them from a
   union.
 
 - Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
   previously it was working only when using the '-n' alternative.
 
 - Don't stop building when both binutils-devel and a C++ compiler isn't
   available to compile the alternative C++ demangle support code, disable that
   feature instead.
 
 - Sync the linux/in.h and coresight-pmu.h header copies with the kernel sources.
 
 - Fix relative include path to cs-etm.h.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZHY9egAKCRCyPKLppCJ+
 JzbBAQCv+i0j/+garWKCTSe33yztzQGS6jxu/YzQrbQO427DMwEA9fJgp/r2OQC5
 wMM5gng2fPaHe6Hs4cnPL/SzMxLC2gQ=
 =fHRR
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix BPF CO-RE naming convention for checking the availability of
   fields on 'union perf_mem_data_src' on the running kernel

 - Remove the use of llvm-strip on BPF skel object files, not needed,
   fixes a build breakage when the llvm package, that contains it in
   most distros, isn't installed

 - Fix tools that use both evsel->{bpf_counter_list,bpf_filters},
   removing them from a union

 - Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
   previously it was working only when using the '-n' alternative

 - Don't stop building when both binutils-devel and a C++ compiler isn't
   available to compile the alternative C++ demangle support code,
   disable that feature instead

 - Sync the linux/in.h and coresight-pmu.h header copies with the kernel
   sources

 - Fix relative include path to cs-etm.h

* tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf evsel: Separate bpf_counter_list and bpf_filters, can be used at the same time
  tools headers UAPI: Sync the linux/in.h with the kernel sources
  perf cs-etm: Copy kernel coresight-pmu.h header
  perf bpf: Do not use llvm-strip on BPF binary
  perf build: Don't compile demangle-cxx.cpp if not necessary
  perf arm: Fix include path to cs-etm.h
  perf bpf filter: Fix a broken perf sample data naming for BPF CO-RE
  perf ftrace latency: Remove unnecessary "--" from --use-nsec option
2023-05-30 17:12:13 -04:00
Linus Torvalds
1683c329b6 regmap: Fixes for v6.4
The most important fix here is for missing dropping of the RCU read lock
 when syncing maple tree register caches, the physical devices I have
 that use the code don't do any syncing so I'd only ever tested this with
 virtual devices and missed the fact that we need to drop the lock in
 order to write to buses that need to sleep.  Otherwise there's a fix for
 an edge case when splitting up large batch writes which has been lurking
 for a long time, a check to make sure nobody writes new drivers with a
 bug that was found in several SoundWire drivers and a tweak to the way
 the new kunit tests are enabled to ensure they don't cause regmap to be
 enabled when it wouldn't otherwise be.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmR15dQACgkQJNaLcl1U
 h9BGKgf+NFD98ZNPsvOoFqAdG33yTDWISTf8FtIakM074vhz0xrBTFolqf/wmBGF
 8VEabgfpmLSyuGEizjK/YLDK4f143XBgivyXUH04vGeAQUx4MfBaf0DSxBlQLh4K
 K3LebH5QNQqdv9Qx7xMy7Y06r3KiQUxUvM8AINukspY0pmY8LtxyGLvv8T3kSpjz
 WU28umwPrNsr36TcSuowncvZmMJ7Y1kSEnNjer1cdVlJVn4cFzkl/Sashmy8Rg3g
 5Qmbg6Kuc6mLetoshtsculYntoLUJeCt6oX01Iq3cxVqkNi+mpOgwMOgjFFlwtrc
 fela1GXUFEKe31FKyQPE0DRKv697eg==
 =iAaD
 -----END PGP SIGNATURE-----

Merge tag 'regmap-fix-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fixes from Mark Brown:
 "The most important fix here is for missing dropping of the RCU read
  lock when syncing maple tree register caches, the physical devices I
  have that use the code don't do any syncing so I'd only ever tested
  this with virtual devices and missed the fact that we need to drop the
  lock in order to write to buses that need to sleep.

  Otherwise there's a fix for an edge case when splitting up large batch
  writes which has been lurking for a long time, a check to make sure
  nobody writes new drivers with a bug that was found in several
  SoundWire drivers and a tweak to the way the new kunit tests are
  enabled to ensure they don't cause regmap to be enabled when it
  wouldn't otherwise be"

* tag 'regmap-fix-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Drop the RCU read lock while syncing registers
  regmap: sdw: check for invalid multi-register writes config
  regmap: Account for register length when chunking
  regmap: REGMAP_KUNIT should not select REGMAP
2023-05-30 17:07:25 -04:00
Linus Torvalds
6d86b56f54 modules-6.4-rc5
A fix is provided for ia64. Even though ia64 is on life support it helps
 to fix issues if we can. Thanks to Linus for doing tons of the ia64
 debugging.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmR2JPsSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinwGIQAIrm0qpwVgDvh98B/anYDVbPpdn1U+/I
 s9LBUMZCMIVEHGoOUU7YV3QGMh27OFvsNW72ggrgPuCbOgPzAfyxLJZoNY1nLURO
 ZWSi2Jg4Om82BTP/Vw79yDjikLjJWAUKT/nHuyJxOnLKVsjKrlKuX+UAPXCqMv1O
 yukZnCoQx6c57iRFLrpGq/+OM4Y/vZ2w8zeb5/HOSvVglkIITlXvcMUXmk0JxtS5
 Rr5R14F59BZnpQD5F3hYYvIWycM2DYNdHA5FFPLt1US6TAXjYlk/hf6jgEmHxvHI
 jN6U3qG0Wm8VO9ZlPXzwKYTPmHhc5llXqSlkXILuYke79w1dS1BINJb7dg3LcGna
 eq2IX0ZwxC4SicvDDFWZGmriwIIYbR7jWrSmtTr7W1HIb5mICIrXSuG0150xaCYv
 fc79brpBRm5me+py+WYkFKqT3DKkGHdB85+c7iXPToZeHY8v6581t3R4XQSHzPF6
 JY0Uhlsb17Korbsl8Iw2FFQ8K8DRjLpeeQnDU7iwEuGpZrPSx872o8pDNH1rnmIp
 wIOjfnjWc5arlCPjWWc0Ga/np7ewBP4Zw4Ff4AFyZG1ISrTmzFBWQI7TqyemjC9v
 RTIBN5QmJIW6Zai/7oL5xNapRJCO250+dg1G8uOka2dklfnLdKxIBafWBa+/Znmn
 ZpmhFljq1w3y
 =h/VF
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull modules fix from Luis Chamberlain:
 "A fix is provided for ia64. Even though ia64 is on life support it
  helps to fix issues if we can. Thanks to Linus for doing tons of the
  ia64 debugging"

* tag 'modules-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: fix module load for ia64
2023-05-30 15:49:40 -04:00
Theodore Ts'o
eb1f822c76 ext4: enable the lazy init thread when remounting read/write
In commit a44be64bbe ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super.  However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started.  This can cause generic/231 to fail in ext4's
nojournal mode.

Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.

Fixes a44be64bbe ("ext4: don't clear SB_RDONLY when remounting r/w until...")

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-30 15:33:57 -04:00
Jan Kara
1077b2d53e ext4: fix fsync for non-directories
Commit e360c6ed72 ("ext4: Drop special handling of journalled data
from ext4_sync_file()") simplified ext4_sync_file() by dropping special
handling of journalled data mode as it was not needed anymore. However
that branch was also used for directories and symlinks and since the
fastcommit code does not track metadata changes to non-regular files, the
change has caused e.g. fsync(2) on directories to not commit transaction
as it should. Fix the problem by adding handling for non-regular files.

Fixes: e360c6ed72 ("ext4: Drop special handling of journalled data from ext4_sync_file()")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/all/ZFqO3xVnmhL7zv1x@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230524104453.8734-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-30 15:33:57 -04:00
Theodore Ts'o
aff3bea953 ext4: add lockdep annotations for i_data_sem for ea_inode's
Treat i_data_sem for ea_inodes as being in their own lockdep class to
avoid lockdep complaints about ext4_setattr's use of inode_lock() on
normal inodes potentially causing lock ordering with i_data_sem on
ea_inodes in ext4_xattr_inode_write().  However, ea_inodes will be
operated on by ext4_setattr(), so this isn't a problem.

Cc: stable@kernel.org
Link: https://syzkaller.appspot.com/bug?extid=298c5d8fb4a128bc27b0
Reported-by: syzbot+298c5d8fb4a128bc27b0@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-5-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-30 15:33:57 -04:00
Theodore Ts'o
2bc7e7c1a3 ext4: disallow ea_inodes with extended attributes
An ea_inode stores the value of an extended attribute; it can not have
extended attributes itself, or this will cause recursive nightmares.
Add a check in ext4_iget() to make sure this is the case.

Cc: stable@kernel.org
Reported-by: syzbot+e44749b6ba4d0434cd47@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-4-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-30 15:33:57 -04:00
Theodore Ts'o
b928dfdcb2 ext4: set lockdep subclass for the ea_inode in ext4_xattr_inode_cache_find()
If the ea_inode has been pushed out of the inode cache while there is
still a reference in the mb_cache, the lockdep subclass will not be
set on the inode, which can lead to some lockdep false positives.

Fixes: 33d201e027 ("ext4: fix lockdep warning about recursive inode locking")
Cc: stable@kernel.org
Reported-by: syzbot+d4b971e744b1f5439336@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-3-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-30 15:33:50 -04:00
Jakub Kicinski
2e246bca98 Merge branch 'devlink-move-port-ops-into-separate-structure'
Jiri Pirko says:

====================
devlink: move port ops into separate structure

In devlink, some of the objects have separate ops registered alongside
with the object itself. Port however have ops in devlink_ops structure.
For drivers what register multiple kinds of ports with different ops
this is not convenient.

This patchset changes does following changes:
1) Introduces devlink_port_ops with functions that allow devlink port
   to be registered passing a pointer to driver port ops. (patch #1)
2) Converts drivers to define port_ops and register ports passing the
   ops pointer. (patches #2, #3, #4, #6, #8, and #9)
3) Moves ops from devlink_ops struct to devlink_port_ops.
   (patches #5, #7, #10-15)

No functional changes.
====================

Link: https://lore.kernel.org/r/20230526102841.2226553-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:22 -07:00
Jiri Pirko
4b5ed2b5a1 devlink: save devlink_port_ops into a variable in devlink_port_function_validate()
Now when the original ops variable is removed, introduce it again
but this time for devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
216ba9f4ad devlink: move port_del() to devlink_port_ops
Move port_del() from devlink_ops into newly introduced devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
216aa67f3e devlink: move port_fn_state_get/set() to devlink_port_ops
Move port_fn_state_get/set() from devlink_ops into newly introduced
devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
4a490d7154 devlink: move port_fn_migratable_get/set() to devlink_port_ops
Move port_fn_migratable_get/set() from devlink_ops into newly introduced
devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
933c13275c devlink: move port_fn_roce_get/set() to devlink_port_ops
Move port_fn_roce_get/set() from devlink_ops into newly introduced
devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
71c93e37cf devlink: move port_fn_hw_addr_get/set() to devlink_port_ops
Move port_fn_hw_addr_get/set() from devlink_ops into newly introduced
devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
aa3aff8264 mlx5: register devlink ports with ops
Use newly introduce devlink port registration function variant and
register devlink port passing ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
7bfb3d0a83 sfc: register devlink port with ops
Use newly introduce devlink port registration function variant and
register devlink port passing ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
65a4c44bf9 devlink: move port_type_set() op into devlink_port_ops
Move port_type_set() from devlink_ops into newly introduced
devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
8a756d91d2 mlx4: register devlink port with ops
Use newly introduce devlink port registration function variant and
register devlink port passing ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
f58a3e4dfe devlink: move port_split/unsplit() ops into devlink_port_ops
Move port_split/unsplit() from devlink_ops into newly introduced
devlink_port_ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
ab8ccc6c13 nfp: devlink: register devlink port with ops
Use newly introduce devlink port registration function variant and
register devlink port passing ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:20 -07:00
Jiri Pirko
865a1a1b97 mlxsw_core: register devlink port with ops
Use newly introduce devlink port registration function variant and
register devlink port passing ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:19 -07:00
Jiri Pirko
b285768537 ice: register devlink port for PF with ops
Use newly introduce devlink port registration function variant and
register devlink port passing ops.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:19 -07:00
Jiri Pirko
6acdf43d8a devlink: introduce port ops placeholder
In devlink, some of the objects have separate ops registered alongside
with the object itself. Port however have ops in devlink_ops structure.
For drivers what register multiple kinds of ports with different ops
this is not convenient. Introduce devlink_port_ops and a set
of functions that allow drivers to pass ops pointer during
port registration.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30 10:32:19 -07:00
Uwe Kleine-König
d19663edc9 fbdev: bw2: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-30 18:33:25 +02:00
Uwe Kleine-König
a3ce8c8ffb fbdev: broadsheetfb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-30 18:33:25 +02:00
Uwe Kleine-König
4b88b6e1c4 fbdev: au1200fb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-30 18:33:25 +02:00
Uwe Kleine-König
bf76544d45 fbdev: au1100fb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-30 18:33:25 +02:00
Uwe Kleine-König
4369e38a6f fbdev: arcfb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-30 18:33:25 +02:00
Uwe Kleine-König
d00394e139 fbdev: au1100fb: Drop if with an always false condition
The driver core never calls a remove callback with the platform_device
pointer being NULL. So the check for this condition can just be dropped.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-30 18:33:25 +02:00