[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.
[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of CHAs from the discovery table on some SPR variants is
incorrect, because of a firmware issue. An accurate number can be read
from the MSR UNC_CBO_CONFIG.
Fixes: 949b11381f ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com
Printing the other clock types should not be conditioned on being able
to print OD_SCLK. Some GPUs currently have limited capability of only
printing a subset of these.
Since this condition was introduced in v5.18-rc1, reading from
`pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15
(2021).
Fixes: 79c65f3fcb ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jonatas Esteves <jntesteves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise, the power source switching will fail due to message
unavailable.
Fixes: bf4823267a ("drm/amd/pm: fix possible power mode mismatch between driver and PMFW")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Put back the radeon_dp_work_func logic. It seems that
handling DP RX interrupts is necessary to make some
panels work. This was removed with the MST support,
but it regresses some systems so add it back. While
we are here, add the proper mutex locking.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c28 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
JP Kobryn says:
====================
Due to the way the datasec maps like bss, data, rodata are memory
mapped, they cannot be resized with bpf_map__set_value_size() like
non-datasec maps can. This series offers a way to allow the resizing of
datasec maps, by having the mapped regions resized as needed and also
adjusting associated BTF info if possible.
The thought behind this is to allow for use cases where a given datasec
needs to scale to for example the number of CPU's present. A bpf program
can have a global array in a data section with an initial length and
before loading the bpf program, the array length could be extended to
match the CPU count. The selftests included in this series perform this
scaling to an arbitrary value to demonstrate how it can work.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch adds test coverage for resizing datasec maps. The first two
subtests resize the bss and custom data sections. In both cases, an
initial array (of length one) has its element set to one. After resizing
the rest of the array is filled with ones as well. A BPF program is then
run to sum the respective arrays and back on the userspace side the sum
is checked to be equal to the number of elements.
The third subtest attempts to perform resizing under conditions that
will result in either the resize failing or the BTF info being cleared.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-3-inwardvessel@gmail.com
This patch updates bpf_map__set_value_size() so that if the given map is
memory mapped, it will attempt to resize the mapped region. Initial
contents of the mapped region are preserved. BTF is not required, but
after the mapping is resized an attempt is made to adjust the associated
BTF information if the following criteria is met:
- BTF info is present
- the map is a datasec
- the final variable in the datasec is an array
... the resulting BTF info will be updated so that the final array
variable is associated with a new BTF array type sized to cover the
requested size.
Note that the initial resizing of the memory mapped region can succeed
while the subsequent BTF adjustment can fail. In this case, BTF info is
dropped from the map by clearing the key and value type.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-2-inwardvessel@gmail.com
A collection of fixes that came in since the merge window, plus an
update to MAINTAINERS. The Cadence fixes are coming from the addition
of device mode support, they required a couple of incremental updates in
order to get something that works robustly for both device and
controller modes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4HEACgkQJNaLcl1U
h9CtTwf9FTN7lDQ0UsAUel68HzaCctuqjtk4cnMooXQSvcLQFRiMVayzLEKFq1dy
bOnPcmAA66sIOccFHNgfDNFSjpOCTWlX4hF1bsX2SvaKPfU2IIlXPTs7z1P8zQW3
hKRrpfXqNObBNNqW/8qcHWsEJGfNQm/+/ag2KQz7pR2t9fnIIC73xOxtBMP7Otyj
wuKmWF71c6hY/TnZiBPutiA9immw9iu8A1DiZL0QAEcZDw2V0ZsPFKiJLHBnTs5W
TrzgDdcm2gRs+GM00O52dMLE1TvPhsPiJsd5XDkPZtlqVGs2dgeBT9aUS1Fus0v0
yEzJRxHYvJZ6Y9rbtLFDMYxKTVSXmQ==
=i5bz
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of fixes that came in since the merge window, plus an
update to MAINTAINERS.
The Cadence fixes are coming from the addition of device mode support,
they required a couple of incremental updates in order to get
something that works robustly for both device and controller modes"
* tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence: Interleave write of TX and read of RX FIFO
spi: dw: Replace spi->chip_select references with function calls
spi: MAINTAINERS: drop Krzysztof Kozlowski from Samsung SPI
spi: spi-cadence: Only overlap FIFO transactions in slave mode
spi: spi-cadence: Avoid read of RX FIFO before its ready
spi: spi-geni-qcom: Select FIFO mode for chip select
Some fixes that came in since the merge window, nothing terribly
exciting - a couple of driver specific fixes and a fix for the error
handling when setting up the debugfs for the devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt32UACgkQJNaLcl1U
h9AYBwf/XcDtTL93J9iXMTTmablx7yg7wv5SZSpE0Kmk7p4GF10XUFNtCoJCBpt3
EPOviUPHRO0O8HqubzLgAc/gp3qo17s1rrGTecyF4DZpHT3lrP4ZUsAzF5mlzv45
aHU4EtKiOTerUiF1wsmgMMyyXCrz3ccl8727hNyPWuaoTDi7TJMkKbrUjvNW1qvN
ckK/f+Of0tWcBRLrMopyqqOjO+NnLyWv2fCGgYEF0cK8/XwBgpJMGx1ECaaxmCNH
E5y46Nx1S0Yl+0kZs8vv/3oyepr0m/KnDIEm7dX8ufKEFY9Rh6eo4wJIhuYhrMyP
GcTJA6UFzKTJENnLJowThvZxvOyXFQ==
=toGp
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Some fixes that came in since the merge window, nothing terribly
exciting - a couple of driver specific fixes and a fix for the error
handling when setting up the debugfs for the devices"
* tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6359: add read check for PMIC MT6359
regulator: Fix error checking for debugfs_create_dir
regulator: pca9450: Fix BUCK2 enable_mask
- Fix error propagation for the non-block-device I/O paths
MMC host:
- sdhci-cadence: Fix an error path during probe
- sdhci-esdhc-imx: Fix support for the "no-mmc-hs400" DT property
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmRt0GQXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnH2Q//VDjF3KnCd/vEk+QJGwIMtnuc
t0WzQNee6b0l9kGpHGNRzfGb/fnvi+Lzse8E7BAzkDhsyEXaP1OUelelHgclR6ek
JtrclumPwTVLhCSHjyQcbdVN1toXvCIkiB3R3LM9lG7Ps06wmtJLcLq5ZTQ++q8S
gCa73HC+2oUoV3ojyt2G4/4ZhW0alYrY1uuB/9sLdunwyWP8k8v88slUTGttK+TY
PLvqfXThHHIuge19GzpkejwLU/L30cRbk+DFcgRm7DTeztIjfdkvLSxrUyPk15d7
lc+QIRbFuERU34WQWTEPCEdJ5e3/tXkX/pIoZZEzYfDUSF6Nu0n/KqnTpMgOWRYK
LJaDlACZqXm6uEpMiMt8dqI4Zlx9fSfNVCshSi3iLRM/hZ5iFX04P3na7RRIv8a3
96tZ5U6WPRMV8sqakKlRgq8p32/GqWrjar3wex5wPzd0zqRtaLmqueWgx0hp2NJl
1fHS6ZYeGKTfOOeVbJIzm/PmBEIhK4H9HqVdbztJZlDkBsu44dTESWdMRdlvvv6v
1o/oZb5umNl083yh1AJpbLCfwN4ISMLQXTOh8NolB9uCtyprZDeGANZV7LE4cnAo
hS7OCCI/ubf7CNNK+rN6LwiD91A2fOqoKUaNtTy2z38gSzRQJ8vNzfdBD8XxZQDT
mDRTmE2mYEa6g3XNrr4=
=PkZ2
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix error propagation for the non-block-device I/O paths
MMC host:
- sdhci-cadence: Fix an error path during probe
- sdhci-esdhc-imx: Fix support for the 'no-mmc-hs400' DT property"
* tag 'mmc-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works
mmc: sdhci-cadence: Fix an error handling path in sdhci_cdns_probe()
mmc: block: ensure error propagation for non-blk
Prior to the commit "763bd29fd3 ("thermal: int340x_thermal: Use
sysfs_emit_at() instead of scnprintf()", there was a new line after each
UUID string.
With the newline removed, existing user space like "thermald" fails to
compare each supported UUID as it is using getline() to read UUID and
apply correct thermal table.
To avoid breaking existing user space, add newline after each UUID string.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 763bd29fd3 ("thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()")
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'end_sector' is compared to 'rdev->recovery_offset', which is offset to
rdev, however, commit e82ed3a4fb ("md/raid6: refactor
raid5_read_one_chunk") changes the calculation of 'end_sector' to offset
to the array. Fix this miscalculation.
Fixes: e82ed3a4fb ("md/raid6: refactor raid5_read_one_chunk")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230524014118.3172781-1-yukuai1@huaweicloud.com
amd_pstate active mode driver is only compatible with static governors.
Therefore it doesn't need fast_switch functionality. Remove
fast_switch_possible flag from amd_pstate active mode driver.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Schedutil normally calls the adjust_perf callback for drivers with
adjust_perf callback available and fast_switch_possible flag set.
However, when frequency invariance is disabled and schedutil tries to
invoke fast_switch. So, there is a chance of kernel crash if this
function pointer is not set. To protect against this scenario add
fast_switch callback to amd_pstate driver.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since at least kernel 6.1, flush_dcache_page() is called with IRQs
disabled, e.g. from aio_complete().
But the current implementation for flush_dcache_page() on parisc
unintentionally re-enables IRQs, which may lead to deadlocks.
Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore()
for the flush_dcache_mmap_*lock() macros instead.
Cc: linux-parisc@vger.kernel.org
Cc: stable@kernel.org # 5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Russell King says:
====================
net: pcs: xpcs: cleanups for clause 73 support
This series cleans up xpcs code, moving much of the clause 73 code
out of the driver into places where others can make use of it.
Specifically, we add a helper to convert a clause 73 advertisement
to ethtool link modes to mdio.h, and a helper to resolve the clause
73 negotiation state to phylink, which includes the pause modes.
In doing this cleanup, several issues were identified with the
original xpcs implementation:
1) it masks the link partner advertisement with its own advertisement
so userspace can't see what the full link partner advertisement
was.
2) it was always setting pause modes irrespective of the advertisements
on either end of the link.
3) it was reading the STAT1 registers multiple times. Reading STAT1
has the side effect of unlatching the link-down status, so
multiple reads should be avoided.
This patch series addresses the first two first by addressing the
issues, and then by moving over to the new helpers. The third issue
is solved by restructuring the xpcs code.
====================
Link: https://lore.kernel.org/r/ZGyR/jDyYTYzRklg@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid reading the STAT1 registers more than once while getting the PCS
state, as this register contains latching-low bits that are lost after
the first read.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use phylink_resolve_c73() to resolve the clause 73 autonegotiation
result.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xpcs was indicating symmetric pause should be enabled regardless of
the advertisements by either party. Fix this to use
linkmode_resolve_pause() now that we're no longer obliterating the
link partner's advertisement by logically anding it with our own.
This is transitional, the function will be entirely replaced with
phylink_resolve_c73() in the following patch.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lp_advertising is supposed to reflect the link partner's advertisement
unmodified by the local advertisement, but xpcs bitwise ands it with
the local advertisement prior to calculating the resolution of the
negotiation.
Fix this by moving the bitwise and to xpcs_resolve_lpa_c73() so it can
place the results in a temporary bitmap before passing that to
ixpcs_get_max_usxgmii_speed().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert xpcs clause 73 reading to use the newly introduced
mii_c73_to_linkmode() helper to translate the link partner
advertisement to an ethtool bitmap.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read the clause 73 link partner advertisement in a loop and then
translate to the ethtool modes.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function to resolve clause 73 negotiation according to the
priority resolution function described in clause 73.3.6.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phylink had two chunks of code virtually the same for resolving the
negotiated pause modes. Factor this down to one function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to convert a clause 73 advertisement to an ethtool bitmap.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit bf5e758f02 ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.
Commit 6c796996ee ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.
Fix this by making use of the fallback functions for sysfs population.
Fixes: bf5e758f02 ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
In the pvcalls_new_active_socket() function, most error paths call
pvcalls_back_release_active(fedata->dev, fedata, map) which calls
sock_release() on "sock". The bug is that the caller also frees sock.
Fix this by making every error path in pvcalls_new_active_socket()
release the sock, and don't free it in the caller.
Fixes: 5db4d286a8 ("xen/pvcalls: implement connect command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountain
Signed-off-by: Juergen Gross <jgross@suse.com>
The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.
While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Since the dawn of time bio_check_eod has a check for a non-zero size of
the device. This doesn't really make any sense as we never want to send
I/O to a device that's been set to zero size, or never moved out of that.
I am a bit surprised we haven't caught this for a long time, but the
removal of the extra validation inside of zram caused syzbot to trip
over this issue recently. I've added a Fixes tag for that commit, but
the issue really goes back way before git history.
Fixes: 9fe95babc7 ("zram: remove valid_io_request")
Reported-by: syzbot+b8d61a58b7c7ebd2c8e0@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230524060538.1593686-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit ef69d2559f ("riscv: Move early dtb mapping into the fixmap
region") wrongly moved the #ifndef CONFIG_BUILTIN_DTB surrounding the pa
variable definition in create_fdt_early_page_table(), so move it back to
its right place to quiet the following warning:
../arch/riscv/mm/init.c: In function ‘create_fdt_early_page_table’:
../arch/riscv/mm/init.c:925:12: warning: unused variable ‘pa’ [-Wunused-variable]
925 | uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);
Fixes: ef69d2559f ("riscv: Move early dtb mapping into the fixmap region")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230519131311.391960-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The kernel kgdb break instructions should only be handled when running
in kernel context.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
The kernel kprobes break instructions should only be handled when running
in kernel context.
Cc: <stable@vger.kernel.org> # v5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
In case a machine can't power-off itself on system shutdown,
allow the user to reboot it by pressing the RETURN key.
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
The preorder callback on the kvm_pgtable_stage2_map() path can replace
a table with a block, then recursively free the detached table. The
higher-level walking logic stashes the old page table entry and
then walks the freed table, invoking the leaf callback and
potentially freeing pgtable pages prematurely.
In normal operation, the call to tear down the detached stage-2
is indirected and uses an RCU callback to trigger the freeing.
RCU is not available to pKVM, which is where this bug is
triggered.
Change the behavior of the walker to reload the page table entry
after invoking the walker callback on preorder traversal, as it
does for leaf entries.
Tested on Pixel 6.
Fixes: 5c359cca1f ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make")
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230522103258.402272-1-tabba@google.com
We appear to have missed the Set/Way CMOs when adding MTE support.
Not that we really expect anyone to use them, but you never know
what stupidity some people can come up with...
Treat these mostly like we deal with the classic S/W CMOs, only
with an additional check that MTE really is enabled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230515204601.1270428-3-maz@kernel.org
Add the missing Set/Way CMOs that apply to tagged memory.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230515204601.1270428-2-maz@kernel.org
We may get an empty response with zero length at the beginning of
the driver start and get following UBSAN error. Since there is no
content(SDRT_NONE) for the response, just return and skip the response
handling to avoid this problem.
Test pass : SDIO wifi throughput test with this patch
[ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12
[ 126.980709] index -1 is out of range for type 'u32 [4]'
[ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1
[ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[ 126.980833] Call Trace:
[ 126.980845] <TASK>
[ 126.980860] dump_stack_lvl+0x48/0x70
[ 126.980895] dump_stack+0x10/0x20
[ 126.980916] ubsan_epilogue+0x9/0x40
[ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90
[ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300]
[ 126.981018] ? _raw_spin_unlock+0x18/0x40
[ 126.981042] ? finish_task_switch+0x175/0x6f0
[ 126.981070] ? __switch_to+0x42e/0xda0
[ 126.981089] ? __switch_to_asm+0x3a/0x80
[ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300]
[ 126.981174] ? __kasan_check_read+0x11/0x20
[ 126.981204] process_one_work+0x7ee/0x13d0
[ 126.981246] worker_thread+0x53c/0x1240
[ 126.981291] kthread+0x2b8/0x370
[ 126.981312] ? __pfx_worker_thread+0x10/0x10
[ 126.981336] ? __pfx_kthread+0x10/0x10
[ 126.981359] ret_from_fork+0x29/0x50
[ 126.981400] </TASK>
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a lightweight spinlock check which uses only two instructions
per spinlock call. It detects if a spinlock has been trashed by
some memory corruption and then halts the kernel. It will not detect
uninitialized spinlocks, for which CONFIG_DEBUG_SPINLOCK needs to
be enabled.
This lightweight spinlock check shouldn't influence runtime, so it's
safe to enable it by default.
The __ARCH_SPIN_LOCK_UNLOCKED_VAL constant has been choosen small enough
to be able to be loaded by one LDI assembler statement.
Signed-off-by: Helge Deller <deller@gmx.de>
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately the maple tree requires us to explicitly lock it so we need
to take the RCU read lock while iterating. When syncing this means that we
end up trying to write out register values while holding the RCU read lock
which triggers lockdep issues since that is an atomic context but most
buses can't be used in atomic context. Pause the iteration and drop the
lock for each register we check to avoid this.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230523-regcache-maple-sync-lock-v1-1-530e4d68dfab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire code as it is only supports Bulk register writes and
it does not support multi-register writes.
Any drivers that set can_multi_write and use regmap_multi_reg_write() will
easily endup with programming the hardware incorrectly without any errors.
So, add this check in bus code to be able to validate the drivers config.
Fixes: 522272047d ("regmap: sdw: Remove 8-bit value size restriction")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154747.5429-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4skACgkQJNaLcl1U
h9Cl2gf8CnINVsSuzSgRqvpaxSpsEufghFJrlVtNPJxJz6z+1X+sz/bsq3ceuIWl
56kJ9V0FgdcFJn8PtzJWSMvY/iwyMjAVrCl7cPqPlEIRrelQUihEteDQiL+lGrPn
m0zkFWywW+r+KuzgoEosqL6/cDx7iR2NsELm/z/6aobsJRwVii7DigGAym9TNvwf
dKvxy3uSX+XbCR7BTadO4wn4iHZ0/BkgYxUu4KckTgFDqHQHwrnbZNLhr0w214el
bQuQOD0o6n8ZhBabOYv6j+TpwMO9qI/PjqJtn+fOZRi4pSmF1HlHL+8HLbukzblA
FcsQJdXyKNzEbgHKTamOul9hgx4q4w==
=H2J9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
The GFNI routines in the AVX version of the ARIA implementation now use
explicit VMOVDQA instructions to load the constant input vectors, which
means they must be 16 byte aligned. So ensure that this is the case, by
dropping the section split and the incorrect .align 8 directive, and
emitting the constants into the 16-byte aligned section instead.
Note that the AVX2 version of this code deviates from this pattern, and
does not require a similar fix, given that it loads these contants as
8-byte memory operands, for which AVX2 permits any alignment.
Cc: Taehee Yoo <ap420073@gmail.com>
Fixes: 8b84475318 ("crypto: x86/aria-avx - Do not use avx2 instructions")
Reported-by: syzbot+a6abcf08bad8b18fd198@syzkaller.appspotmail.com
Tested-by: syzbot+a6abcf08bad8b18fd198@syzkaller.appspotmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jiri Pirko says:
====================
devlink: small port_new/del() cleanup
This patchset cleans up couple of leftovers after recent devlink locking
changes. Previously, both port_new/dev() commands were called without
holding instance lock. Currently all devlink commands are called with
instance lock held.
The first patch just removes redundant port notification.
The second one removes couple of outdated comments.
The last patch changes port_dev() to have devlink_port pointer as an arg
instead of port_index, which makes it similar to the rest of port
related ops.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>