Few fixes for Devicetree bindings and related docs, all for issues
introduced in v6.4-rc1 commits:
1. media/ov2685: fix number of possible data lanes, as old binding
explicitly mentioned one data lane. This fixes dt_binding_check
warnings like:
Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
2. Maintainers: correct path of Apple PWM binding. This fixes
refcheckdocs warning.
3. PCI/fsl,imx6q: correct parsing of assigned-clocks and related
properties and make the clocks more specific per PCI device (host or
endpoint). This fixes dtschema limitation and dt_binding_check
warnings like:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed
From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
-----BEGIN PGP SIGNATURE-----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=iuNU
-----END PGP SIGNATURE-----
Merge tag 'dt-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt
Pull devicetree binding fixes from Krzysztof Kozlowski:
"A few fixes for Devicetree bindings and related docs, all for issues
introduced in v6.4-rc1 commits:
- media/ov2685: fix number of possible data lanes, as old binding
explicitly mentioned one data lane. This fixes dt_binding_check
warnings like:
Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
- PCI/fsl,imx6q: correct parsing of assigned-clocks and related
properties and make the clocks more specific per PCI device (host
or endpoint). This fixes dtschema limitation and dt_binding_check
warnings like:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed
From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
- Maintainers: correct path of Apple PWM binding. This fixes
refcheckdocs warning"
* tag 'dt-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
dt-bindings: PCI: fsl,imx6q: fix assigned-clocks warning
MAINTAINERS: adjust file entry for ARM/APPLE MACHINE SUPPORT
media: dt-bindings: ov2685: Correct data-lanes attribute
Smatch complains that:
arcfb_probe() warn: 'irq' from request_irq() not released on lines: 587.
Fix error handling in the arcfb_probe() function. If IO addresses are
not provided or framebuffer registration fails, the code will jump to
the err_addr or err_register_fb label to release resources.
If IRQ request fails, previously allocated resources will be freed.
Fixes: 1154ea7dcd ("[PATCH] Framebuffer driver for Arc LCD board")
Signed-off-by: Zongjie Li <u202112089@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
When mgag200 switched from simple KMS to regular atomic helpers,
the initialization of the gamma settings was lost.
This leads to a black screen, if the bios/uefi doesn't use the same
pixel color depth.
v2: rebase on top of drm-misc-fixes, and add Cc stable tag.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2171155
Fixes: 1baf9127c4 ("drm/mgag200: Replace simple-KMS with regular atomic helpers")
Cc: <stable@vger.kernel.org>
Tested-by: Phil Oester <kernel@linuxace.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510131034.284078-1-jfalempe@redhat.com
For 8852CE, there is abnormal state called CMDPSR_FRZTO,
which occasionally happens in some platforms, and could be
found by firmware and fixed in current SER flow, so we add
suppress function to avoid verbose message for this resolved case.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508084335.42953-4-pkshih@realtek.com
Newer FW re-design SER (syetem error recovery) L1 (level 1) flow.
New L1 flow will expect two extra states before original L1 flow.
* Before:
fw --- M1 --> driver
fw <-- M2 --- driver
fw --- M3 --> driver
fw <-- M4 --- driver
fw --- M5 --> driver
* After:
fw --- pre-M0 --> driver
fw <-- post-M0 --- driver
fw --- M1 --> driver
fw <-- M2 --- driver
fw --- M3 --> driver
fw <-- M4 --- driver
fw --- M5 --> driver
Then before M1, FW gets one more interval to deal with things that FW
should have handled well. To consider backward/forward compatibility,
FW and driver won't change flow from M1 to M5. (only except that halt
trigger control will change a little bit.) So, there will be two differnt
starting points of SER L1.
* old FW: SER L1 starts from M1
* new FW: SER L1 starts from pre-M0
Then, driver adds the new SER L1 entry and also keep the original one
instead of changing it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508084335.42953-3-pkshih@realtek.com
RTL8851B keeps almost the same interrupt flow as RTL8852A and RTL8852B.
But, it uses a different bitmask for interrupt indicator of FW HALT C2H.
So, we make a chip judgement in pci when configuring interrupt mask.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508084335.42953-2-pkshih@realtek.com
U-NII-4 band, i.e 5.9GHz channels, can be supported by chip 8852C, 8852B
and 8851B. But, it is not supported by chip 8852A. Flag support_unii4 is
added in chip info and defined by chip accordingly to indicate that.
We reference this flag of runtime chip to decide whether to register
5.9GHz channels.
After that, we consider if U-NII-4 band is allowed by our regulatory
rule of U-NII-4. If chip::support_unii4 but not regd::allow_unii4,
we stll do not register 5.9GHz channels.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508081211.38760-4-pkshih@realtek.com
For realtek regulatory, there are following two kinds of configurations
to determine whether to allow UNII-4 band, i.e. 5.9GHz channels.
1. default setting according to whether chip support it or not
2. evaluate realtek ACPI DSM with RTW89_ACPI_DSM_FUNC_59G_EN (func. 6)
If (1) is false, we won't try (2) and just disallow UNII-4. Otherwise,
if (2) is not supported or returns a non-specific value, we follow the
default setting either. Besides, this commit aims to add decision logic
in rtw89 regulatory. Actually, driver doesn't register UNII-4 yet. That
will be handled by another commit.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508081211.38760-3-pkshih@realtek.com
Introduce realtek ACPI DSM method to get required BIOS
configurations. It will be used in the following commits.
And, enum rtw89_acpi_dsm_func is added for listing the functions
which are currently recognized.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508081211.38760-2-pkshih@realtek.com
The type of "mwifiex_adapter->nd_info" is "struct cfg80211_wowlan_nd_info",
not "struct cfg80211_wowlan_nd_match".
Use struct_size() to ease the computation of the needed size.
The current code over-allocates some memory, so is safe.
But it wastes 32 bytes.
Fixes: 7d7f07d8c5 ("mwifiex: add wowlan net-detect support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7a6074fb056d2181e058a3cc6048d8155c20aec7.1683371982.git.christophe.jaillet@wanadoo.fr
Call mutex_unlock(&rtwdev->mutex); before returning on this error path.
Fixes: f0e741e4dd ("wifi: rtw88: add bitmap for dynamic port settings")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ddd10a74-5982-4f65-8c59-c1cca558d239@kili.mountain
gfx 11.0.4 range starts from 0x80.
Fixes: 311d52367d ("drm/amdgpu: add soc21 common ip block support for GC 11.0.4")
Cc: stable@vger.kernel.org
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: Yogesh Mohan Marimuthu <Yogesh.Mohanmarimuthu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In recent access points, information element is longer as they include
additional data which exceeds 256 bytes. To accommodate longer
association response, increase the ASSOC response buffer.
Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230509172811.4953-1-amisha.patel@microchip.com
Mandatory WFA testcase
CT_Security_WPA2Personal_STA_RSNEBoundsVerification-AbsentRSNCap,
performs bounds verfication on Beacon and/or Probe response frames. It
failed and observed the reason to be absence of cipher suite and AKM
suite in RSN information. To fix this, enable the RSN flag before extracting RSN
capabilities.
Fixes: cd21d99e59 ("wifi: wilc1000: validate pairwise and authentication suite offsets")
Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230421181005.4865-1-amisha.patel@microchip.com
According to Mirsad the gpio-sim.sh test appears to FAIL in a wrong way
due to missing initialisation of shell variables:
4.2. Bias settings work correctly
cat: /sys/devices/platform/gpio-sim.0/gpiochip18/sim_gpio0/value: No such file or directory
./gpio-sim.sh: line 393: test: =: unary operator expected
bias setting does not work
GPIO gpio-sim test FAIL
After this change the test passed:
4.2. Bias settings work correctly
GPIO gpio-sim test PASS
His testing environment is AlmaLinux 8.7 on Lenovo desktop box with
the latest Linux kernel based on v6.2:
Linux 6.2.0-mglru-kmlk-andy-09238-gd2980d8d8265 x86_64
Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prevent further dpm casting on legacy asics without od_enabled in
amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain
in init sequence.
v2: add a macro to check legacy dpm instead of checking asic family/type
v3: refine macro name for naming consistency
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It was reported that soft dirty tracking doesn't work when using the
Radix MMU.
The tracking is supposed to work by clearing the soft dirty bit for a
mapping and then write protecting the PTE. If/when the page is written
to, a page fault occurs and the soft dirty bit is added back via
pte_mkdirty(). For example in wp_page_reuse():
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, vmf->address, vmf->pte, entry, 1))
update_mmu_cache(vma, vmf->address, vmf->pte);
Unfortunately on radix _PAGE_SOFTDIRTY is being dropped by
radix__ptep_set_access_flags(), called from ptep_set_access_flags(),
meaning the soft dirty bit is not set even though the page has been
written to.
Fix it by adding _PAGE_SOFTDIRTY to the set of bits that are able to be
changed in radix__ptep_set_access_flags().
Fixes: b0b5e9b130 ("powerpc/mm/radix: Add radix pte #defines")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: Dan Horák <dan@danny.cz>
Link: https://lore.kernel.org/r/20230511095558.56663a50f86bdc4cd97700b7@danny.cz
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230511114224.977423-1-mpe@ellerman.id.au
For development and testing purposes, the i915.force_probe module
parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of
devices that aren't supported by the driver.
The i915.force_probe module parameter is "unsafe" and setting it taints
the kernel. However, using the kconfig option does not.
Always taint the kernel when force probing a device that is not
supported.
v2: Drop "depends on EXPERT" to avoid build breakage (kernel test robot)
Fixes: 7ef5ef5cde ("drm/i915: add force_probe module parameter to replace alpha_support")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504103508.1818540-1-jani.nikula@intel.com
(cherry picked from commit 3312bb4ad0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
(cherry picked from commit 51f7008239)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
Fixes: 74a75dc908 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505082212.27089-1-stanislav.lisovskiy@intel.com
(cherry picked from commit 1d5b09f8da)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A pair of pre-Xe registers were being included in the Xe capture list.
GuC was rejecting those as being invalid and logging errors about
them. So, stop doing it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes: dce2bd5423 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-2-John.C.Harrison@Intel.com
(cherry picked from commit b049132d61)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Russell King says:
====================
net: mvneta: reduce size of TSO header allocation
With reference to
https://forum.turris.cz/t/random-kernel-exceptions-on-hbl-tos-7-0/18865/https://github.com/openwrt/openwrt/pull/12375#issuecomment-1528842334
It appears that mvneta attempts an order-6 allocation for the TSO
header memory. While this succeeds early on in the system's life time,
trying order-6 allocations later can result in failure due to memory
fragmentation.
Firstly, the reason it's so large is that we take the number of
transmit descriptors, and allocate a TSO header buffer for each, and
each TSO header is 256 bytes. The driver uses a simple mechanism to
determine the address - it uses the transmit descriptor index as an
index into the TSO header memory.
(The first obvious question is: do there need to be this
many? Won't each TSO header always have at least one bit
of data to go with it? In other words, wouldn't the maximum
number of TSO headers that a ring could accept be the number
of ring entries divided by 2?)
There is no real need for this memory to be an order-6 allocation,
since nothing in hardware requires this buffer to be contiguous.
Therefore, this series splits this order-6 allocation up into 32
order-1 allocations (8k pages on 4k page platforms), each giving
32 TSO headers per page.
In order to do this, these patches:
1) fix a horrible transmit path error-cleanup bug - the existing
code unmaps from the first descriptor that was allocated at
interface bringup, not the first descriptor that the packet
is using, resulting in the wrong descriptors being unmapped.
2) since xdp support was added, we now have buf->type which indicates
what this transmit buffer contains. Use this to mark TSO header
buffers.
3) get rid of IS_TSO_HEADER(), instead using buf->type to determine
whether this transmit buffer needs to be DMA-unmapped.
4) move tso_build_hdr() into mvneta_tso_put_hdr() to keep all the
TSO header building code together.
5) split the TSO header allocation into chunks of order-1 pages.
This has now been tested by the Turris folk and has been found to fix
the allocation error.
====================
Link: https://lore.kernel.org/r/ZFtuhJOC03qpASt2@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we no longer need to check whether the DMA address is within
the TSO header DMA memory range for the queue, we can allocate the TSO
header DMA memory in chunks rather than one contiguous order-6 chunk,
which can stress the kernel's memory subsystems to allocate.
Instead, use order-1 (8k) allocations, which will result in 32 order-1
pages containing 32 TSO headers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move tso_build_hdr() into mvneta_tso_put_hdr() so that all the TSO
header building code is in one place.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we use a different buffer type for TSO headers, we can use
buf->type to determine whether the original buffer was DMA-mapped or
not. The rules are:
MVNETA_TYPE_XDP_TX - from a DMA pool, no unmap is required
MVNETA_TYPE_XDP_NDO - dma_map_single()'d
MVNETA_TYPE_SKB - normal skbuff, dma_map_single()'d
MVNETA_TYPE_TSO - from the TSO buffer area
This means we only need to call dma_unmap_single() on the XDP_NDO and
SKB types of buffer, and we no longer need the private IS_TSO_HEADER()
which relies on the TSO region being contiguously allocated.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mark dma-mapped skbs and TSO buffers separately, so we can use
buf->type to identify their differences.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The transmit code assumes that the transmit descriptors that are used
begin with the first descriptor in the ring, but this may not be the
case. Fix this by providing a new function that dma-unmaps a range of
numbered descriptor entries, and use that to do the unmapping.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Error handler for etm_setup_aux can not release coresight path because
cpu mask was cleared when coresight_trace_id_get_cpu_id failed.
Call coresight_release_path function explicitly when alloc trace id filed.
Fixes: 4ff1fdb412 ("coresight: perf: traceid: Add perf ID allocation and notifiers")
Signed-off-by: Ruidong Tian <tianruidong@linux.alibaba.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425032416.125542-1-tianruidong@linux.alibaba.com
This code generates a Smatch warning:
drivers/hwtracing/coresight/coresight-tmc-etr.c:947 tmc_etr_buf_insert_barrier_packet()
error: uninitialized symbol 'bufp'.
The problem is that if tmc_sg_table_get_data() returns -EINVAL, then
when we test if "len < CORESIGHT_BARRIER_PKT_SIZE", the negative "len"
value is type promoted to a high unsigned long value which is greater
than CORESIGHT_BARRIER_PKT_SIZE. Fix this bug by adding an explicit
check for error codes.
Fixes: 75f4e3619f ("coresight: tmc-etr: Add transparent buffer management")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/7d33e244-d8b9-4c27-9653-883a13534b01@kili.mountain
Fix incorrect output that could occur when more attributes are used and
GPIO_V2_LINE_ATTR_ID_DEBOUNCE is not the first one.
Signed-off-by: Milo Spadacini <milo.spadacini@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently the SYN RTO schedule follows an exponential backoff
scheme, which can be unnecessarily conservative in cases where
there are link failures. In such cases, it's better to
aggressively try to retransmit packets, so it takes routers
less time to find a repath with a working link.
We chose a default value for this sysctl of 4, to follow
the macOS and IOS backoff scheme of 1,1,1,1,1,2,4,8, ...
MacOS and IOS have used this backoff schedule for over
a decade, since before this 2009 IETF presentation
discussed the behavior:
https://www.ietf.org/proceedings/75/slides/tcpm-1.pdf
This commit makes the SYN RTO schedule start with a number of
linear backoffs given by the following sysctl:
* tcp_syn_linear_timeouts
This changes the SYN RTO scheme to be: init_rto_val for
tcp_syn_linear_timeouts, exp backoff starting at init_rto_val
For example if init_rto_val = 1 and tcp_syn_linear_timeouts = 2, our
backoff scheme would be: 1, 1, 1, 2, 4, 8, 16, ...
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230509180558.2541885-1-morleyd.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>