Under harsh testing conditions, including low memory, the guest would
stop receiving packets. With this patch applied we no longer see any
problems in the driver while performing these tests for extended periods
of time.
Make sure napi is scheduled subsequent to each napi_enable.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Olaf Kirch <okir@suse.de>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert all the parisc driver interrupt handlers (dino, eisa, gsc,
iosapic and superio) as well as the cpu interrupts. Prepare
show_interrupts for GENERIC_HARDIRQS_NO_DEPRECATED and finally selects
that Kconfig option
[jejb: compile and testing fixes]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
amd64_debug_display_dimm_sizes() reports the distribution of the DIMMs
on each DRAM controller and its chip select sizes. Thus, the last don't
have anything to do with whether we're running in ganged DCT mode or not
- their sizes don't change all of a sudden. Fix that by removing the
ganged-check and dump DCT0's config for DCT1 when in ganged mode since
they're identical.
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong.
I should have modified tseg1_min not tseg2_min.
This patch reverts tseg2_min to 1 and set tseg1_min to 2.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
after these changes omap1_defconfig and omap2plus_defconfig don't have any
section mismatches any more, making it plausible that the patches earlier
in this series are OK.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These changes are fixing some build problem I had when compiling
without BCMDBG being set.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH V2 3/3] drivers/staging: zcache: misc build/config
Makefiles and Kconfigs to build zcache in drivers/staging
There is a dependency on xvmalloc.* which in 2.6.37 resides
in drivers/staging/zram. Should this move or disappear,
some Makefile/Kconfig changes will be required.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH V2 2/3] drivers/staging: zcache: host services and PAM services
Zcache provides host services (memory allocation) for tmem,
a "shim" to interface cleancache and frontswap to tmem, and
two different page-addressable memory implemenations using
lzo1x compression. The first, "compression buddies" ("zbud")
compresses pairs of pages and supplies a shrinker interface
that allows entire pages to be reclaimed. The second is
a shim to xvMalloc which is more space-efficient but
less receptive to page reclamation. The first is used
for ephemeral pools and the second for persistent pools.
All ephemeral pools share the same memory, that is, even
pages from different pools can share the same page.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH V2 1/3] drivers/staging: zcache: in-kernel tmem code
Transcendent memory ("tmem") is a clean API/ABI that provides
for an efficient address translation and a set of highly
concurrent access methods to copy data between a page-oriented
data source (e.g. cleancache or frontswap) and a page-addressable
memory ("PAM") data store. Of critical importance, the PAM data
store is of unknown (and possibly varying) size so any individual
access may succeed or fail as defined by the API/ABI.
Tmem exports a basic set of access methods (e.g. put, get,
flush, flush object, new pool, and destroy pool) which are
normally called from a "host" (e.g. zcache).
To be functional, two sets of "ops" must be registered by the
host, one to provide "host services" (memory allocation) and
one to provide page-addressable memory ("PAM") hooks.
Tmem supports one or more "clients", each which can provide
a set of "pools" to partition pages. Each pool contains
a set of "objects"; each object holds pointers to some number
of PAM page descriptors ("pampd"), indexed by an "index" number.
This triple <pool id, object id, index> is sometimes referred
to as a "handle". Tmem's primary function is to essentially
provide address translation of handles into pampds and move
data appropriately.
As an example, for cleancache, a pool maps to a filesystem,
an object maps to a file, and the index is the page offset
into the file. And in this patch, zcache is the host and
each PAM descriptor points to a compressed page of data.
Tmem supports two kinds of pages: "ephemeral" and "persistent".
Ephemeral pages may be asynchronously reclaimed "bottoms up"
so the data structures and concurrency model must allow for
this. For example, each pampd must retain sufficient information
to invalidate tmem's handle-to-pampd translation.
its containing object so that, on reclaim, all tmem data
structures can be made consistent.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a complete rewrite of the AD9832/35 driver.
Purpose was to move this driver to the recently
created API for such devices.
Changes since V1:
IIO: DDS: AD9832 / AD9835 driver: Apply review feedback
Save a few bytes, use union for data allocated for spi buffers.
Remove use of device IDs.
Fix comments.
Make master clock mclk always type unsigned long.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a new trigger that can be invoked by writing
the sysfs file: trigger_now. This approach can be valuable during
automated testing or in situations, where other trigger methods
are not applicable. For example no RTC or spare GPIOs.
Last but not least we can allow user space applications to produce triggers.
IIO: TRIGGER: Apply review feedback by Greg Kroah-Hartman
Changes since v1:
Add sysfs documentation.
Change license notice.
Add module alias.
Add more Kconfig help text
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change return values type from u16 to int because all functions
use ft1000_control function which return int.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some cases try to modify const strings, and in any event the
CVS revision strings have not changed in over ten years making
these printouts completely worthless.
Just kill all of this stuff off.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I2C address range included 0x2a, which the chips do not support.
Replace with 0x29 which is supported but was missing.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
LM64 has 16 degrees Celsius temperature offset on all
remote sensor registers.
This was not considered When LM64 support was added to lm63.c.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
If we have an EDID for a digital panel, but we are probing a non-TMDS
connector then we know that this is a false detection, and vice versa.
This should reduce the number of bogus outputs on multi-function
adapters that report the same output on multiple connectors.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34101
Reported-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca>
Tested-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Taken from the fork of the driver at:
http://code.google.com/p/easy-slow-down-manager/
which should no longer be needed now that the in-kernel driver now
supports these laptops.
Cc: Kobelkov Sergey <sergeyko81@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Combo devices have TX statistics on different place, because
struct statistics_rx_bt and struct statistics_rx have different
size. User proper values on combo devices instead of random data.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Make ack health code easies to read. Compared to previous
code, we do not print debug messages when expected_ack_cnt_delta == 0
and also do check against negative deltas.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
No functional change, make recover from statistics code
easies to read.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The variable appears in both ath_softc and ath_beacon_config.
The struct ath_beacon_config is embedded in ath_softc. The redundant
variable was added by commit id 57c4d7b4c4.
Signed-off-by: Steve Brown <sbrown@cortland.com>
Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Info was provided by Soeren Sonnenburg <bugreports@nn7.de>
Cc: Soeren Sonnenburg <bugreports@nn7.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From: Randy Dunlap <randy.dunlap@oracle.com>
softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h.
drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree'
drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=654599
Many users report very low speed problem on 3945 devices,
this patch fixes problem, but only for some of them.
For unknown reason, sometimes after hw scanning, device is not able
to receive frames at high rate. Since plcp health check may request
hw scan to "reset radio", performance problem start to be observable
after update kernel to .35, where plcp check was introduced.
Bug reporter confirmed that removing plcp check fixed problem for him.
Reported-and-tested-by: SilvioTO <silviotoya@yahoo.it>
Cc: stable@kernel.org # 2.6.35+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This driver will be in a deadlock, When the rx offload is set by ethtool.
The pch_gbe_reinit_locked function was modified.
Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These were introduced with the patch, "staging: samsung-laptop: Extend
samsung-laptop platform driver to support another flavor of its platform
BIOS."
Cc: Ingmar Steen <iksteen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These were introduced with the patch, "staging: samsung-laptop: Extend
samsung-laptop platform driver to support another flavor of its platform
BIOS."
Cc: Ingmar Steen <iksteen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are currently two implementations of the Samsung BIOS that controls the rfkill
switch, backlight brightness / power and performance level. The samsung-laptop driver
implements the BIOS flavor with the SECLINUX signature, this patch implements talking
to the other BIOS with 'SwSmi@' signature. Both expose very similar functionality and
way of accessing the commands. The differences are mostly offsets, command identifiers
and some values.
This patch introduces a sabi_config structure that contains information on identifying
and accessing specific SABI flavors.
Signed-off-by: Ingmar Steen <iksteen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed the Following coding Style Issues:
drivers/staging/quickstart/quickstart.c:8: ERROR: trailing whitespace
drivers/staging/quickstart/quickstart.c:144: ERROR: spaces required around that '?' (ctx:VxV)
drivers/staging/quickstart/quickstart.c:144: ERROR: spaces required around that ':' (ctx:VxV)
Signed-off-by: Timo von Holtz <tvh@informatik.uni-kiel.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
