Commit graph

134,929 commits

Author SHA1 Message Date
Linus Lüssing
641ee3f8f4 Staging: batman-adv: Unify sysfs file names with their bat_priv atomics
Both sysfs entries and variable names shall be as descriptive as
possible while not exceeding a certain length. This patch renames
bat_priv atomics to be equally descriptive with their according sysfs
entries.

Unifying sysfs and bat_priv atomic names also makes it easier to find
each others pendant.

The reduced ("type"-)information which was previously indicated with a
_enabled for booleans got substituted by a comment in bat_priv.

This patch has also been done in regards for the future BAT_ATTR_*
macros (they only need one name argument instead of a file and variable
name).

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:11 -08:00
Marek Lindner
420193573f Staging: batman-adv: softif bridge loop avoidance
By connecting multiple batman-adv mesh nodes to the same ethernet
segment a loop can be created when the soft-interface is bridged
into that ethernet segment. A simple visualization of the loop
involving the most common case - a LAN as ethernet segment:

node1  <-- LAN  -->  node2
   |                   |
 wifi  <-- mesh -->  wifi

Packets from the LAN (e.g. ARP broadcasts) will circle forever from
node1 or node2 over the mesh back into the LAN.

This patch adds the functionality to detect other batman-adv nodes
connected to the LAN and select a 'gateway' to talk to the
non-batman-adv devices on this LAN. All traffic from and to the mesh
will be handled by this gateway to avoid the loop. OGMs received via
the soft-interface are interpreted as 'port announcements' to locate
potential batman-adv nodes. The patch can also deal with vlans on
top of batX and offers a list of LAN neighbors via debugfs.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:11 -08:00
Andreas Langer
225f7b0b95 Staging: batman-adv: reassemble fragmented skb if mtu allows it
Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:10 -08:00
Andreas Langer
9061109ab1 Staging: batman-adv: fragment forwarded packets
If a packet is too big to be forwarded over an interface it will be
fragmented on-the-fly (if fragmentation is enabled).

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:10 -08:00
Andreas Langer
b8cd75445e Staging: batman-adv: remove redundant is_my_mac() check in route_unicast_packet
Callers should check the if the received packet is for us before it
calls route_unicast_packet.

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:10 -08:00
Andreas Langer
f3cc7595d2 Staging: batman-adv: move skb reassembly of fragmented packets into dedicated function
Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:10 -08:00
Andreas Langer
8bbde32cf5 Staging: batman-adv: add frag_ prefix to all fragmentation related functions
Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:09 -08:00
Andreas Langer
49b588e79f Staging: batman-adv: restructure fragmentation to handle batman unicast packets
The unicast_frag_send_skb() function expected 'raw' packets (without any
batman-adv header) to fragment them. This needs to be changed, so that
this function is able to fragment packets that already traveled inside
the mesh but need to be fragmented now.

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:09 -08:00
Marek Lindner
3f427604d6 Staging: batman-adv: use rcu callbacks when freeing batman_if
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:09 -08:00
Marek Lindner
b4abfcd4c7 Staging: batman-adv: convert batman_if custom refcounting to kref functions
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:09 -08:00
Sven Eckelmann
bd27509f49 Staging: batman-adv: Don't remove interface with spinlock held
We call a lot of the netdevice code when holding if_list_lock which will
spin the whole time. This is not necessary because we only want to
protect the access to the list to be serialized. An extra queue can be
used which hold all interfaces which should be removed and then use that
queue without any locks for netdevice cleanup.

Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:09 -08:00
Sven Eckelmann
43fc987224 Staging: batman-adv: Add new sysfs files to README
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:08 -08:00
Marek Lindner
2f1646788f Staging: batman-adv: ensure that eth_type_trans gets linear memory
eth_type_trans tries to pull data with the length of the ethernet header
from the skb. We only ensured that enough data for the first ethernet
header and the batman header is available in non-paged memory of the skb
and not for the ethernet after the batman header.

eth_type_trans would fail sometimes with drivers which don't ensure that
all there data is perfectly linearised.

Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:08 -08:00
Sven Eckelmann
4f26559156 Staging: batman-adv: Replace Andrew Lunn as Staging maintainer
Andrew Lunn didn't submit patches to staging since a while and may not
be the right person for new patches.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:09:08 -08:00
Michael Hennerich
4f76548299 staging: iio: dac: ad5446: Remove unused sign member from chip specific information structure
Remove unused sign member from chip specific information structure
Fix typos

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:06:46 -08:00
Michael Hennerich
d846263da4 staging: iio: dac: ad5446: Enable driver support for AD5620/AD5640/AD5660 DA converters
Initial support for single channel, 12-/14-/16-Bit nanoDAC with On-Chip Reference

staging: iio: dac: ad5446: Fix according to review feedback

Review feedback by Jonathan Cameron:
	Use kernel doc style to document headers.
	Turn data into a union
	Add some comments for clarity

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:06:06 -08:00
Jonathan Cameron
f386caa3cd staging: iio: documentation rewrite and cleanup of sysfs documetation
Change to capital syntax for documetation e.g. 'inX-inY_raw'
Use multiple 'What:' entries rather than wild cards or options so
as to make the documentation clearer and easier to search.
Some trivial spelling fixes.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:05:36 -08:00
Jonathan Cameron
fe34604844 staging: iio: adis16260 add suppport for adis16255 and adis16250.
Unusual element is addition of 'negate' and 'axis' platform data
to ensure we support all the functionality of the adis16255 driver
currently in staging.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Matthias Brugger <mensch0815@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:04:48 -08:00
Jonathan Cameron
a9672951a5 staging: iio: adis16260 add id table support
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:04:48 -08:00
Michael Hennerich
2b4756aa36 staging: iio: adc: Enable driver support for ad7887 AD converter
Enable support for AD7887:  SPI Micropower, 2-Channel, 125 kSPS, 12-Bit ADC

staging: iio: adc: Fix according to review feedback

Review feedback by Jonathan Cameron:
	Combine statements.
	Document struct members.
	Remove redundant variable initialization.
	Simplify multichannel scan from ring logic.
	Fix coding style.

[v2]
staging: iio: adc: ad7887: Fix typos

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:02:56 -08:00
Michael Hennerich
b5a4948175 staging: iio: dac: Enable driver support for AD5444 and AD5446 DA converters
Enable support for AD5444 and AD5446:  12-/14-Bit High Bandwidth
Multiplying DACs with Serial Interface.

staging: iio: dac: Add support for AD5541A, AD5512A digital to analog convertors

staging: iio: dac: Fix according to review feedback

Review feedback by Jonathan Cameron:
	Remove spurious new line.
	Document struct members.
	Remove redundant variable initialization.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 11:02:55 -08:00
Huang Weiyi
95bd48578b staging: brcm80211: remove duplicated #include
Remove duplicated #include('s) in
  drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 10:59:50 -08:00
Randy Dunlap
72f9fc7c81 staging: easycap needs smp_lock.h, fixes build error
Add header file to fix build error:

drivers/staging/easycap/easycap_main.c:4251: error: implicit declaration of function 'lock_kernel'
drivers/staging/easycap/easycap_main.c:4254: error: implicit declaration of function 'unlock_kernel'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 10:53:14 -08:00
Marek Lindner
b6faaae1a1 Staging: batman-adv: ensure that eth_type_trans gets linear memory
eth_type_trans tries to pull data with the length of the ethernet header
from the skb. We only ensured that enough data for the first ethernet
header and the batman header is available in non-paged memory of the skb
and not for the ethernet after the batman header.

eth_type_trans would fail sometimes with drivers which don't ensure that
all there data is perfectly linearised.

The failure was noticed through a kernel bug Oops generated by the
skb_pull inside eth_type_trans.

Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 10:53:14 -08:00
Sven Eckelmann
9ee898739b Staging: batman-adv: Don't remove interface with spinlock held
We call a lot of the netdevice code when holding if_list_lock which will
spin the whole time. This is not necessary because we only want to
protect the access to the list to be serialized. An extra queue can be
used which hold all interfaces which should be removed and then use that
queue without any locks for netdevice cleanup.

We create a "scheduling while atomic" Oops when calling different
netdevice related functions inside a spinlock protected area on a
preemtible kernel.

Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 10:53:14 -08:00
Arend van Spriel
6df78338e7 staging: brcm80211: updated maintainers contact information
Open-source development team extended so contacts updated.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 10:53:14 -08:00
Chris Wilson
c5d1b51d35 drm/i915: Clear pfit registers when not used by any outputs
... otherwise the panel-fitter may be left enabled with random settings
and cause unintended filtering (i.e. blurring of native modes on external
panels).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31942
Reported-and-tested-by: Ben Kohler <bkohler@gmail.com>
Tested-by: Ciprian Docan <docan@eden.rutgers.edu>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-29 18:45:01 +00:00
Greg Kroah-Hartman
8d7ee9c498 Merge branch 'master' into work 2010-11-29 10:44:22 -08:00
Toshiharu Okada
50a4205333 pch_gbe driver: The wrong of initializer entry
The wrong of initializer entry was modified.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29 08:51:34 -08:00
Toshiharu Okada
a1dcfcb7f2 pch_gbe dreiver: chang author
This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake".
I update the Kconfig, renamed "Topcliff" to "EG20T".

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29 08:51:33 -08:00
Simon Wood
d65c3768af HID: add support for F430 Force Feedback Wheel
This patch adds USB IDs to enable force feedback on the Thrustmaster
F430 wheel.

Antonio did the work, I just converted to git patch to include in Kernel.

Reported-by: Antonio Orefice <aorefice77@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-29 17:41:23 +01:00
Mac Lin
760efe6910 USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs
The CNS3XXX SOC has include USB EHCI and OHCI compatible controllers.
This patch adds the necessary glue logic to allow ehci-hcd and ohci-hcd
drivers to work on CNS3XXX

The EHCI and OHCI controllers share a common clock control and reset
bit, therefore additional check for the timming of enabling and disabling
is required. The USB bit of PLL Power Down Control is also shared by OTG,
24MHzUART clock, Crypto clock, PCIe reference clock, and Clock Scale
Generator. Therefore we only ensure it is enabled, while not disabling it.

Signed-off-by: Mac Lin <mkl0301@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-29 18:32:47 +03:00
Michael S. Tsirkin
e4dde731ae vhost: correctly set bits of dirty pages
Fix two bugs in dirty page logging:
When counting pages we should increase address by 1 instead of
VHOST_PAGE_SIZE. Make log_write() correctly process requests
that cross pages with write_address not starting at page boundary.

Reported-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-29 10:26:55 +02:00
Keith Packard
c5027dec02 drm: record monitor status in output_poll_execute
In order to correctly report monitor connected status changes, the
previous monitor status must be recorded in the connector->status
value instead of being discarded.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-29 16:27:57 +10:00
Keith Packard
bf9dc102e2 drm: Set connector DPMS status to ON in drm_crtc_helper_set_config
When setting a new crtc configuration, force the DPMS state of all
connectors to ON. Otherwise, they'll be left at OFF and a future mode set
that disables the specified connector will not turn the connector off.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-29 16:27:56 +10:00
Nishanth Aravamudan
f6aedd8606 powerpc/macio: Ensure all dma routines get copied over
Also add a comment to dev_archdata, indicating that changes there need
to be verified against the driver code.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29 15:48:21 +11:00
Tracey Dent
72b962d3bb powerpc/ps3: Replace the use of <module>-objs with <module>-y
Changed <module>-objs to <module>-y in Makefile.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29 15:48:19 +11:00
Srikanth Krishnakar
8cb7c71bda rtc-cmos.c : Fix warning on PowerPC
The following warning is seen while compilation of PowerPC kernel:

 CC      drivers/rtc/rtc-cmos.o
drivers/rtc/rtc-cmos.c:697:2: warning: #warning Assuming 128 bytes
of RTC+NVRAM address space, not 64 bytes.

Fix it by adding defined(__powerpc__).

Signed-off-by: Srikanth Krishnakar <skrishna@mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29 15:48:19 +11:00
Joe Perches
5a71c61b77 drivers/char/hvc_vio: Use static const char arrays
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29 15:48:18 +11:00
Yang Li
d830418e40 ucc_geth: fix ucc halt problem in half duplex mode
In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size),
the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation
of the QE Reference Manual.  But that will sometimes cause tx halt
while working in half duplex mode.

According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO
threshold size can cause UCC to halt), setting UTFTT less than
[(UTFS x (M - 8)/M) - 128] will prevent this from happening
(M is the minimum buffer size).

The patch changes UTFTT back to 256.

Signed-off-by: Li Yang <leoli@freescale.com>
Cc: Jean-Denis Boyer <jdboyer@media5corp.com>
Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:36:57 -08:00
Scott J. Goldman
e9248fbd6b vmxnet3: fix compilation when RSS is disabled
If RSS is disabled, we can ifdef out some RSS specific code. This fixes
the compile error found by Randy Dunlap.

Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:25:33 -08:00
Breno Leitao
5c7e57f7cd ehea: Add some info messages and fix an issue
This patch adds some debug information about ehea not being able to
allocate enough spaces. Also it correctly updates the amount of available
skb.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:15:22 -08:00
Frank Blaschka
8fa9208e30 qeth: l3 fix len in tso hdr
The tso hdr is longer then the regular l3 hdr. Fix the calculation
of the total len by accounting the size of the tso hdr.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:13:18 -08:00
Ursula Braun
2b6203bb7d qeth: enable interface setup if LAN is offline
Device initialization of a qeth device contains a STARTLAN step.
This step may fail, if cable is not yet plugged in. The qeth device
stays in state HARDSETUP until cable is plugged in. This prevents
further preparational initialization steps of the qeth device and
its network interface. This patch makes sure initialization of qeth
device continues, even though cable is not yet plugged in.
Once carrier is available, qeth is notified, triggers a recovery
which results in a working network interface.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:13:17 -08:00
Joe Perches
cdac082e05 drivers/s390/net: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:13:17 -08:00
Sachin Sant
f3aa3136d9 qeth lcs: convert mc rwlock to RCU
Commit 1d7138de87
igmp: RCU conversion of in_dev->mc_list

converted rwlock to RCU.

Update the s390 network drivers(qeth & lcs) code to adapt to this change.
V2 : Changes based on suggestions given by Eric Dumazet

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:13:16 -08:00
Giuseppe Cavallaro
5e95596897 stmmac: fix stmmac_resume removing not yet used shutdown flag
The commit to convert to use the dev_pm_ops struct
introduces a bug. The shutdown flag is not yet used
because the hibernation on memory is done by using
the freeze callback.
Thanks to Vlad for having reported it.

Reported-by: Vlad Lungu <vlad.lungu@windriver.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:10:53 -08:00
Szymon Janc
de855b992d forcedeth: use usleep_range not msleep for small sleeps
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:06:59 -08:00
Szymon Janc
34cf97eb25 forcedeth: do not use assignment in if conditions
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:06:58 -08:00
Szymon Janc
5504e1397c forcedeth: include <linux/io.h> and <linux/uaccess.h> instead of <asm/io.h> and <asm/uaccess.h> as suggested by checkpatch
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:06:58 -08:00