Commit graph

134,929 commits

Author SHA1 Message Date
Chris Wilson
045e769ab6 drm/i915: Handle GPU hangs during fault gracefully.
Instead of killing the process, just return no page found and reschedule
the process giving the GPU some time to (hopefully) recover.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-07 09:18:22 +00:00
Greg Kroah-Hartman
557a3dac2c Staging: ath6kl: remove empty files that mess with 'distclean'
These two .h files would get removed from the tree when doing
	make distclean

It turns out they are not needed at all, so just delete them which fixes
people's git trees when doing development.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-06 11:27:04 -07:00
Vivek Goyal
d017bf6b4f floppy: fix another use-after-free
While scanning the floopy code due to c093ee4f07 ("floppy: fix
use-after-free in module load failure path"), I found one more instance
of trying to access disk->queue pointer after doing put_disk() on
gendisk.  For some reason , floppy moule still loads/unloads fine.  The
object is probably still around with right pointer values.

 o There seems to be one more instance of trying to cleanup the request
   queue after we have called put_disk() on associated gendisk.

 o This fix is more out of code inspection.  Even without this fix for
   some reason I am able to load/unload floppy module without any
   issues.

 o Floppy module loads/unloads fine after the fix.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-06 07:49:56 -07:00
Greg Kroah-Hartman
1db01135df TTY: move .gitignore from drivers/char/ to drivers/tty/vt/
The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to
be ignored by git, so move the .gitignore file that was doing it to the
properly location now that the files have moved as well.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-05 22:18:23 -07:00
Linus Torvalds
151f52f09c ipw2x00: remove the right /proc/net entry
Commit 27ae60f8f7 ("ipw2x00: replace "ieee80211" with "libipw" where
appropriate") changed DRV_NAME to be "libipw", but didn't properly fix
up the places where it was used to specify the name for the /proc/net/
directory.

For backwards compatibility reasons, that directory name remained
"ieee80211", but due to the DRV_NAME change, the error case printouts
and the cleanup functions now used "libipw" instead.  Which made it all
fail badly.

For example, on module unload as reported by Randy:

  WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e()
  name 'libipw'

because it's trying to unregister a /proc directory that obviously
doesn't even exist.

Clean it all up to use DRV_PROCNAME for the actual /proc directory name.

Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 18:57:04 -07:00
Linus Torvalds
c093ee4f07 floppy: fix use-after-free in module load failure path
Commit 488211844e ("floppy: switch to one queue per drive instead of
sharing a queue") introduced a use-after-free.  We do "put_disk()" on
the disk device _before_ we then clean up the queue associated with that
disk.

Move the put_disk() down to avoid dereferencing a free'd data structure.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 17:45:59 -07:00
Linus Torvalds
4b4a2700f4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits)
  inet_diag: Make sure we actually run the same bytecode we audited.
  netlink: Make nlmsg_find_attr take a const nlmsghdr*.
  fib: fib_result_assign() should not change fib refcounts
  netfilter: ip6_tables: fix information leak to userspace
  cls_cgroup: Fix crash on module unload
  memory corruption in X.25 facilities parsing
  net dst: fix percpu_counter list corruption and poison overwritten
  rds: Remove kfreed tcp conn from list
  rds: Lost locking in loop connection freeing
  de2104x: fix panic on load
  atl1 : fix panic on load
  netxen: remove unused firmware exports
  caif: Remove noisy printout when disconnecting caif socket
  caif: SPI-driver bugfix - incorrect padding.
  caif: Bugfix for socket priority, bindtodev and dbg channel.
  smsc911x: Set Ethernet EEPROM size to supported device's size
  ipv4: netfilter: ip_tables: fix information leak to userland
  ipv4: netfilter: arp_tables: fix information leak to userland
  cxgb4vf: remove call to stop TX queues at load time.
  cxgb4: remove call to stop TX queues at load time.
  ...
2010-11-05 15:25:48 -07:00
Linus Torvalds
f69fa76482 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix race when reading count in AR descriptor
  firewire: ohci: avoid reallocation of AR buffers
  firewire: ohci: fix race in AR split packet handling
  firewire: ohci: fix buffer overflow in AR split packet handling
2010-11-05 14:17:22 -07:00
Linus Torvalds
b312e131cb Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (ltc4261) Fix error message format
  hwmon: (ltc4261) Add missing newline in debug message
2010-11-05 14:15:17 -07:00
Jean Delvare
475200c088 hwmon: (ltc4261) Fix error message format
adapter->id is deprecated and not set by any adapter driver, so this
was certainly not what the author wanted to use. adapter->nr maybe,
but as dev_err() already includes this value, as well as the client's
address, there's no point repeating them. Better print a simple error
message in plain English words.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-05 10:17:19 -07:00
Guenter Roeck
69f8b74193 hwmon: (ltc4261) Add missing newline in debug message
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-05 10:17:19 -07:00
Randy Dunlap
65f75ace23 leds-net5501: taints kernel, add license
Add MODULE_LICENSE() that matches file comments so that kernel
is not tainted.

	leds_net5501: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 09:51:56 -07:00
Greg Kroah-Hartman
60d4ae8d43 TTY: create drivers/tty/vt and move the vt code there
The vt and other related code is moved into the drivers/tty/vt directory.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-05 08:16:52 -07:00
Greg Kroah-Hartman
96fd7ce58f TTY: create drivers/tty and move the tty core files there
The tty code should be in its own subdirectory and not in the char
driver with all of the cruft that is currently there.

Based on work done by Arnd Bergmann <arnd@arndb.de>

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-05 08:10:33 -07:00
Ben Collins
0e4de059d9 solo6x10: Implement working P2M descriptor more DMA
We have to insert 1 dead descriptor first (all zereos), and then the real
data descriptors after that.

Everything uses descriptor mode now (8800 interrupts per second for display
v4l2 is now down to ~96).

Signed-off-by: Ben Collins <bcollins@bluecherry.net>
2010-11-05 10:29:33 -04:00
Heikki Krogerus
19aab56c7f usb: musb: Fix handling of spurious SESSREQ
Rely on VBUS being valid on top off B device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@nokia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:17:35 +02:00
Ming Lei
b212091474 usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time
musb driver still may write MUSB_DEVCTL register after clock is disabled
in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc
module is loaded for the 2nd time.

The patch fixes the kernel oops in this case.

[1] kernel oops when loading musb_hdrc module for the 2nd time

[   93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[   93.387847] bus: 'platform': add driver musb_hdrc
[   93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[   93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[   93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable  0x0
[   93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[   93.405395] musb_hdrc: MHDRC RTL version 1.400
[   93.405426] musb_hdrc: setup fifo_mode 3
[   93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64
[   93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512
[   93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512
[   93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512
[   93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512
[   93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256
[   93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256
[   93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms
[   93.405944] device: 'gadget': device_add
[   93.406921] PM: Adding info for No Bus:gadget
[   93.406951] musb_init_controller 2136: OTG mode, status 0, dev80
[   93.407379] musb_do_idle 51: musb_do_idle: state=1
[   93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc'
[   93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc
[  124.486938] bus: 'platform': remove driver musb_hdrc
[  124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend
[  124.491424] device: 'gadget': device_unregister
[  124.491424] PM: Removing info for No Bus:gadget
[  124.495269]  gadget: musb_gadget_release
[  124.498992] driver: 'musb_hdrc': driver_release
[  129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5
[  129.576934] bus: 'platform': add driver musb_hdrc
[  129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc
[  129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc
[  129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume
[  129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404
[  129.600830] Internal error: : 1028 [#1]
[  129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev
[  129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc]
[  129.619964] CPU: 0    Not tainted  (2.6.36-next-20101021+ #372)
[  129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc]
[  129.632415] LR is at mark_held_locks+0x64/0x94
[  129.637084] pc : [<bf032198>]    lr : [<c00ad7c4>]    psr: 20000013
[  129.637084] sp : c6d5fcb0  ip : c6d5fc38  fp : c6d5fcd4
[  129.649139] r10: c6e72180  r9 : fa0ab000  r8 : c05612e8
[  129.654602] r7 : 0000005c  r6 : c0559cc8  r5 : c6e72180  r4 : c0561548
[  129.661468] r3 : 04d60047  r2 : fa0ab000  r1 : c07169d8  r0 : 00000000
[  129.668304] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  129.675811] Control: 10c5387d  Table: 86e4c019  DAC: 00000015
[  129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0)
[  129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000)
[  129.692626] fca0:                                     fa0ab000 c0555c54 c6d5fcd4 c0561548
[  129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8
[  129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40
[  129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc
[  129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330
[  129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0
[  129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0
[  129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74
[  129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8
[  129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8
[  129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08
[  129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222
[  129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000
[  129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278
[  129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4
[  129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8
[  129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4
[  129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0
[  129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8
[  129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28
[  129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000
[  129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388
[  129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac
[  129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8
[  129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a
[  129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b
[  129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c
[  129.924499] Backtrace:
[  129.927185] [<bf0320e8>] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [<bf03140c>] (musb_probe+0x250/0xf2c [musb_hdrc])
[  129.938781]  r6:c05612e0 r5:00000003 r4:c0561548
[  129.943695] [<bf0311bc>] (musb_probe+0x0/0xf2c [musb_hdrc]) from [<c029a398>] (platform_drv_probe+0x20/0x24)
[  129.954040] [<c029a378>] (platform_drv_probe+0x0/0x24) from [<c0299120>] (driver_probe_device+0x10c/0x264)
[  129.964172] [<c0299014>] (driver_probe_device+0x0/0x264) from [<c0299314>] (__driver_attach+0x9c/0xa0)
[  129.973968] [<c0299278>] (__driver_attach+0x0/0xa0) from [<c02987d4>] (bus_for_each_dev+0x68/0x94)
[  129.983367]  r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000
[  129.989349] [<c029876c>] (bus_for_each_dev+0x0/0x94) from [<c0298ea4>] (driver_attach+0x24/0x28)
[  129.998565]  r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000
[  130.004547] [<c0298e80>] (driver_attach+0x0/0x28) from [<c0297f84>] (bus_add_driver+0xd0/0x274)
[  130.013671] [<c0297eb4>] (bus_add_driver+0x0/0x274) from [<c0299614>] (driver_register+0x78/0x158)
[  130.023101] [<c029959c>] (driver_register+0x0/0x158) from [<c029a868>] (platform_driver_register+0x5c/0x60)
[  130.033325]  r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0
[  130.039276] [<c029a80c>] (platform_driver_register+0x0/0x60) from [<c029a88c>] (platform_driver_probe+0x20/0xa8)
[  130.050018] [<c029a86c>] (platform_driver_probe+0x0/0xa8) from [<bf03104c>] (musb_init+0x4c/0x54 [musb_hdrc])
[  130.060424]  r5:000b9008 r4:0010281c
[  130.064239] [<bf031000>] (musb_init+0x0/0x54 [musb_hdrc]) from [<c00463dc>] (do_one_initcall+0x3c/0x1c0)
[  130.074218] [<c00463a0>] (do_one_initcall+0x0/0x1c0) from [<c00bb9b8>] (sys_init_module+0xbc/0x1d0)
[  130.083709] [<c00bb8fc>] (sys_init_module+0x0/0x1d0) from [<c0052000>] (ret_fast_syscall+0x0/0x3c)
[  130.093109]  r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e
[  130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404)
[  130.105621] ---[ end trace 1d0bd69deb79164d ]---

Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:16:32 +02:00
Bob Liu
9c7564620f USB: musb: blackfin: push clkin value to platform resources
In order to not touch the driver file for different xtal usage,
push the clkin value to board file and calculate the register
value instead of hardcoding it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:13:32 +02:00
Bob Liu
68f64714dc USB: musb: blackfin: fix dynamic device<->host changing
We need to restart the timer in order to recognize USB devices in
host-only mode.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:12:22 +02:00
Bob Liu
1e393c6eec USB: musb: blackfin: pm: make it work
Split the USB MMR init steps out into a helper func that both the platform
init and the resume code may call.

Then while suspending, the gpio_vrsel will change from high to low which
will generate a wakeup event and resume the system immediately, so we need
to manually drive it low before we sleep.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:10:57 +02:00
Bob Liu
32d5dc9520 USB: musb: pm: don't rely fully on clock support
Since clock support is optional across processors, don't make the whole
musb pm paths depend upon it.  Just conditionalize the clock accesses.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 14:08:15 +02:00
Ian Jeffray
5d726f5add USB: musb: blackfin: fix musb_read_txhubport() definition
The new MUSB power code needs musb_read_txhubport() to
return a value (so stub it as 0 like the other Blackfin
hub funcs).

Signed-off-by: Ian Jeffray <ian@jeffray.co.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:59:32 +02:00
Ming Lei
31c9909b51 USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
Commit 9f445cb29918dc488b7a9a92ef018599cce33df7[USB: musb: disable
double buffering for older RTL versions] tries to disable double
buffer mode by writing endpoint hw max packet size to TXMAP/RXMAP.

First the approach can break full speed and cause overflow problems.
We should always set those registers with the actual max packet size
from endpoint descriptor.

Second, the problem describe by commit 9f445cb299
was caused by musb gadget driver; nothing to do with RTL revision as
originaly suspected.

The real fix to the problem is to always use actual max packet
size from endpoint descriptor to config TXMAP/RXMAP registers.

Cc: Cliff Cai <cliff.cai@analog.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:56:17 +02:00
Grazvydas Ignotas
120d074c58 usb: musb: don't leave PHY enabled on shutdown()
Some actions like musb_platform_exit are only performed on module
removal and not on shutdown, which results in PHY being left enabled
on reboot at least. This is sometimes causing strange failures after
reboot (observed on OMAP3 pandora board), when DEVCTL does not report
VBUS state correctly due to unknown reasons (possibly because of
communication issues between musb IP and PHY). Running
musb_platform_exit before reset seems to resolve that issue.

Move some exit code from musb_remove() to musb_shutdown() so that it
is performed on both module removal and shutdown/reset. Also convert
the host check so that it doesn't need #ifdef.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:48:09 +02:00
Rahul Ruikar
e2c3404523 usb: musb: musb_gadget: fix resource leakage in error path
In function musb_gadget_setup() call put_device()
when device_register() fails.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:43:14 +02:00
Ming Lei
9001d80df9 usb: musb: gadget: fix dma mode 0 in double buffer Rx case
1, In Rx double buffer case, FIFO may have two packets, so
rxstate should be called to unload fifo if RXPKTRDY is set
even the current request has not been completed.

2, Commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85
introduces autoclear to support double buffer in dma mode 0,
so remove clearing RXPKTRDY manually for dma mode 0.

3, Commit c7af6b29ffeffbeb28caf39e5b2ce29b11807c7d may break
dma mode 1 for non-doublebuffer endpoint, fix it.

With this patch, either usbtest #5 or g_file_storage(writing
file to device in usb host) or g_ether have been tested OK in
double buffer case(using fifo mode 3). Also, this patch has
been verified that single buffer case can't be broken.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05 13:42:31 +02:00
Ben Collins
319fb3bacc solo6x10: Updates to videobuf-dma-sg functions for latest kernel
Signed-off-by: Ben Collins <bcollins@bluecherry.net>
2010-11-04 23:20:31 -04:00
Ben Collins
f62de9be26 solo6x10: Conversion to videobuf-dma-sg (from dma-cont)
Full rewrite of the P2M DMA Engine to support scatter gather and take
advantage of some of the features of the hardware. This includes using
repeat DMA operations and line-mode transfers (for copying OSG and
video display buffers).

What isn't working: For some reason, descriptor mode is not working. I've
implemented a psuedo version (still has one-interrupt per DMA operation),
but we would get huge improvements if we could hand off a ring of
descriptors to the P2M and get back one interrupt when it was done with
all of them.

Documentation is very vague on this, and even the ODM example code
half attempts to get it right, but comments it out of the driver
because it just doesn't work *sigh*

Converts all v4l2 to dma-sg. So long slow dma-contiguous, but hello
more interrupts :(

Signed-off-by: Ben Collins <bcollins@bluecherry.net>
2010-11-04 22:51:17 -04:00
Ben Collins
1194cf4308 solo6x10: Update TODO
Signed-off-by: Ben Collins <bcollins@bluecherry.net>
2010-11-04 22:42:25 -04:00
Ben Collins
98e2d5a802 solo6x10: Spaces to tabs
Signed-off-by: Ben Collins <bcollins@bluecherry.net>
2010-11-04 22:37:15 -04:00
Daniel Vetter
75e9e9158f drm/i915: kill mappable/fenceable disdinction
a00b10c360 "Only enforce fence limits inside the GTT" also
added a fenceable/mappable disdinction when binding/pinning buffers.
This only complicates the code with no pratical gain:

- In execbuffer this matters on for g33/pineview, as this is the only
  chip that needs fences and has an unmappable gtt area. But fences
  are only possible in the mappable part of the gtt, so need_fence
  implies need_mappable. And need_mappable is only set independantly
  with relocations which implies (for sane userspace) that the buffer
  is untiled.

- The overlay code is only really used on i8xx, which doesn't have
  unmappable gtt. And it doesn't support tiled buffers, currently.

- For all other buffers it's a bug to pass in a tiled bo.

In short, this disdinction doesn't have any practical gain.

I've also reverted mapping the overlay and context pages as possibly
unmappable. It's not worth being overtly clever here, all the big
gains from unmappable are for execbuf bos.

Also add a comment for a clever optimization that confused me
while reading the original patch by Chris Wilson.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-04 19:02:03 +00:00
Daniel Vetter
818f2a3cc3 drm/i915: revert pageflip/mappable related abi breakage
In a00b10c360 "Only enforce fence limits inside the GTT"
Chris Wilson implemented an optimization to only pin framebuffers
as mappable for crtc_set_base (but not for pageflips). This breaks
the abi, eg: A double buffering mesa client might leave the last
framebuffer in unmappable space on close. A subsequent glReadPix
by a frontbuffer rendering client then goes boom. My pretty anal
mappable/unmappable consistency checking detected this, see

https://bugs.freedesktop.org/show_bug.cgi?id=31286

Chris Wilson tried to fix this in 085ce26437 by pinning
tiled framebuffers into mappable space. This
a) renders the original optimization of not forcing framebuffers
   for pageflipping clients into mappable pointless because all our
   scanout buffers are tiled by default.
b) doesn't solve the problem for untiled framebuffers.

So kill this. Emperically it's no gain anyway because framebuffers are
being reused by the ddx and hence there's no chance for them to get
constanly bounced between mappable and unmappable.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-04 18:55:59 +00:00
Herbert Xu
c054a076a1 crypto: padlock - Fix AES-CBC handling on odd-block-sized input
On certain VIA chipsets AES-CBC requires the input/output to be
a multiple of 64 bytes.  We had a workaround for this but it was
buggy as it sent the whole input for processing when it is meant
to only send the initial number of blocks which makes the rest
a multiple of 64 bytes.

As expected this causes memory corruption whenever the workaround
kicks in.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-04 14:38:39 -04:00
Benjamin LaHaise
8c5188b6d3 Input: atkbd - add 'terminal' parameter for IBM Terminal keyboards
Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate
using a protocol similar, but not identical to the AT keyboard protocol.
(Models known to be like this include 6110344, 6110668, 1390876, 1386887, and
possibly others.)

When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they
can be connected to a standard PC, with three caveats:

a) They can only use scancode set 3; requests to use anything else are
quietly ignored.
b) The AT Command to request Make, Break and Repeat codes is not properly
interpreted.
c) The top function keys on a 122 key keyboard, and the arrow/edit keys in
the middle of the board send non-standard scancodes.

C) is easily taken care of in userspace, by use of setkeycodes
B) can be taken care of by a userspace hack (that makes the kernel complain
in dmesg)
A) is fixable in theory, but on the keyboard i tested on (6110668), it seems
to be detected unoverridably as Set 2, causing userspace oddities that make
it harder to fix C).

Enclosed is a small patch to the kernel that fixes A) and B) in the kernel,
making it much easier to fix C) in userspace. It adds a single kernel
command line parameter that overrides the detection that sets these boards
as set 2, and instead of sending the Make-break-repeat command to the
keyboard, it sends the make-break command, which is properly recognized by
these keyboards. Software level key repeating seems to make up for the lack
of hardware repeat codes perfectly.

Without manually setting the command line parameter (tentatively named
atkbd.terminal), this code has no effect, and the driver works exactly as
before.

See also:

http://www.seasip.info/VintagePC/ibm_1390876.html
http://www.seasip.info/VintagePC/ibm_6110344.html
http://geekhack.org/showwiki.php?title=Island:7306

Signed-off-by: Erika Quinn <erikas.aubade@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04 10:30:48 -07:00
Jesse Barnes
73b14484fb Input: i8042 - add Sony VAIOs to MUX blacklist
The Sony VPCZ1 doesn't support active multiplexing and trying to enable
it causes keyboard to stop working. Since most (all?) VAIOs do not have
external PS/2 ports nor they implement active multiplexing properly, and
trying to enable MUX usually messes up keyboard/touchpad, let's simply
disable MUX probing based on board name (VAIO).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04 08:39:11 -07:00
Henrik Rydberg
5a39ce5b49 HID: egalax: Use kzalloc
To avoid unnecessary explicit initialization, allocate zeroed memory.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-04 11:04:44 -04:00
Michael S. Tsirkin
8b7347aab6 vhost: get/put_user -> __get/__put_user
We do access_ok checks on all ring values on an ioctl,
so we don't need to redo them on each access.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:12 +02:00
Michael S. Tsirkin
dfe5ac5b18 vhost: copy_to_user -> __copy_to_user
We do access_ok checks at setup time, so we don't need to
redo them on each access.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:11 +02:00
Michael S. Tsirkin
64e1c80748 vhost-net: batch use/unuse mm
Move use/unuse mm to vhost.c which makes it possible to batch these
operations.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:11 +02:00
Michael S. Tsirkin
533a19b4b8 vhost: put mm after thread stop
makes it possible to batch use/unuse mm

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:10 +02:00
Chris Wilson
46168f3936 Merge branch 'drm-intel-fixes' into drm-intel-next 2010-11-04 09:40:36 +00:00
Zhenyu Wang
16a02cf08a agp/intel: fix cache control for sandybridge
This is broken from 97ef1bdd0b.
Let's set the correct bit for LLC+MLC and LLC only.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-04 09:39:50 +00:00
Zhenyu Wang
8d0f567082 agp/intel: restore cache behavior on sandybridge
This restores cache behavior for default AGP_USER_MEMORY as
uncached, and leave default AGP_USER_CACHED_MEMORY as LLC only.
I've seen different cache behavior on one sandybridge desktop CPU vs.
another mobile CPU. Until we figure out how to detect the real cache
config, restore back to the original behavior now.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-04 09:39:28 +00:00
Zhenyu Wang
e07ac3a0b1 drm/i915; Don't apply Ironlake FDI clock workaround to Sandybridge
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-04 09:39:15 +00:00
Zhenyu Wang
5e84e1a487 drm/i915: Fix KMS regression on Sandybridge/CPT
We should enable FDI normal training on Sandybridge/CPT system
as well.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
[ickle: removed unrelated chunks]
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-04 09:39:08 +00:00
Eric Dumazet
53ab2221da de2104x: fix panic on load
Its now illegal to call netif_stop_queue() before register_netdev()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03 18:50:06 -07:00
Eric Dumazet
7b8e824651 atl1 : fix panic on load
Its now illegal to call netif_stop_queue() before register_netdev()

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03 18:50:05 -07:00
Amerigo Wang
1c260e49d5 netxen: remove unused firmware exports
Quote from Amit Salecha:

"Actually I was not updated, NX_UNIFIED_ROMIMAGE_NAME (phanfw.bin) is already
submitted and its present in linux-firmware.git.

I will get back to you on NX_P2_MN_ROMIMAGE_NAME, NX_P3_CT_ROMIMAGE_NAME and
NX_P3_MN_ROMIMAGE_NAME. Whether this will be submitted ?"

We have to remove these, otherwise we will get wrong info from modinfo.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dhananjay Phadke <dhananjay.phadke@qlogic.com>
Cc: Narender Kumar <narender.kumar@qlogic.com>
Acked-by:  Amit Kumar Salecha <amit.salecha@qlogic.com>--
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03 18:50:05 -07:00
Sjur Brændeland
2c24a5d1b4 caif: SPI-driver bugfix - incorrect padding.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03 18:50:03 -07:00
John Faith
6cc0e949af smsc911x: Set Ethernet EEPROM size to supported device's size
The SMSC911x supports 128 x 8-bit EEPROMs.  Increase the EEPROM size
so more than just the MAC address can be stored.

Signed-off-by: John Faith <jfaith7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03 18:50:02 -07:00