Commit graph

134,929 commits

Author SHA1 Message Date
Dominik Brodowski
cdb138080b pcmcia: do not use win_req_t when calling pcmcia_request_window()
Instead of win_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem
ranges. After a call to pcmcia_request_window(), the windows found there
are reserved and may be used until pcmcia_release_window() is called.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-mtd@lists.infradead.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:21 +02:00
Chris Wilson
891b48cfc8 drm/i915: Avoid blocking the kworker thread on a stuck mutex
Just reschedule the retire requests again if the device is currently
busy. The request list will be pruned along other paths so will never
grow unbounded and so we can afford to miss the occasional pruning.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-29 12:26:37 +01:00
Chris Wilson
3d2a812ae4 drm/i915/debug: Remove default WATCH_BUF
Replaced by tracepoints.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-29 11:41:19 +01:00
Chris Wilson
97d1ebaf81 drm/i915/debug: Remove defunct WATCH_LRU
This has bitrotted through inuse and superseded by tracing and debugfs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-29 11:41:18 +01:00
Jassi Brar
0c92ecf10d spi/s3c64xx: Correction for 16,32 bits bus width
We can't do without setting channel and bus width to
same size. In order to do that, use loop read/writes in
polling mode and appropriate burst size in DMA mode.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 17:31:33 +09:00
Jassi Brar
b42a81ca0f spi/s3c64xx: Consider the clk_from_cmu flag
Newer SoCs have the SPI clock scaling control in platform's
clock management unit. Inorder for such SoCs to work, we need
to check the flag clk_from_cmu before making any clock changes.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 17:31:33 +09:00
Jassi Brar
e02ddd442a spi/s3c64xx: Prevent unnecessary map-unmap
Since we use DMA mode only for xfers bigger than FIFO size,
do not map/unmap buffers for polling mode transfers.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 17:31:31 +09:00
Julia Lawall
4a4fd47155 spi/amba-pl022: Fix error case return statement.
The return -EINVAL appears to only make sense if the if branch that it is
aligned with is taken, and the indentation indicates that this is the
authors intent, so move it into that branch.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 17:31:30 +09:00
Julia Lawall
e447d3588e spi/orion: Drop unnecessary null test
list_for_each_entry binds its first argument to a non-null value, and thus
any null test on the value of that argument is superfluous.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
iterator I;
expression x,E;
@@

I(x,...) { <...
- (x != NULL) &&
  E
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 17:31:29 +09:00
Felipe Balbi
079a176d87 spi: omap2_mcspi: make use of dev_vdbg()
dev_vdbg() is only compiled when VERBOSE is defined, so
there's no need to wrap dev_dbg() on #ifdef VERBOSE .. #endif
as we can use dev_vdbg() directly.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 17:31:29 +09:00
Kevin Liu
90182317a9 mfd: Fix max8925 irq control bit incorrect setting
In max8925_irq_sync_unlock(), irq control bit is set at the same time.
Zero means enabling irq, and one means disabling irq.

The original code is:
	irq_chg[0] &= irq_data->enable;

It should be changed to:
	irq_chg[0] &= ~irq_data->enable;

Otherwise, irq control bit is mess.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-29 10:14:53 +02:00
Mark Brown
c9d66d3515 mfd: Ignore non-GPIO IRQs when setting wm831x IRQ types
The driver was originally tested with an additional patch which
made this unneeded but that patch had issuges and got lost on the
way to mainline, causing problems when the errors are reported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Cc: stable@kernel.org
2010-09-29 10:14:52 +02:00
Grazvydas Ignotas
66be8f6cec OMAP: DSS2: make filter coefficient tables human readable
Reorganize scaler FIR filter data as FIR value tables from raw
register values. This makes them easier to understand and simplifies
register programming code.

No functional changes.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-09-29 10:34:46 +03:00
Jarkko Nikula
dd9c8bfbf0 OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel
This panel driver is using SPI for its communication so add CONFIG_SPI
dependency.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Roger Quadros <roger.quadros@nokia.com>
Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-09-29 10:34:46 +03:00
Michal Simek
2548558445 of: MTD: Fix OF probing on little-endian systems
Convert big-endian DTB to little-endian if necessary.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 15:28:14 +09:00
Michal Simek
a04e78b857 of: GPIO: Fix OF probing on little-endian systems
DTB is always big-endian that's why is necessary
to convert it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-29 15:28:08 +09:00
Thomas Gleixner
557d0540b9 IB/umad: Make user_mad semaphore a real one
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 20:52:21 -07:00
Joe Perches
fc4ec9bd82 RDMA/amso1100: Remove KERN_<level> from pr_<level> use
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 20:51:20 -07:00
Dan Carpenter
4d8d6389b2 RDMA/nes: Remove unneeded variable
Just a small cleanup.  The "passive_state" variable isn't used any
more after commit dae58728dc ("RDMA/nes: Fix double CLOSE event
indication crash")

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 20:50:07 -07:00
Eli Cohen
0498628f97 mlx4_core: Allow log_mtts_per_seg up to 7
As there are now machines with a lot more physical memory, we need to
be able to register more memory. This patch lifts the upper limit of
log_mtts_per_seg from 5 to 7, increasing the amount of memory that can
be registered.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 20:48:49 -07:00
Len Brown
9587a678fa Merge branch 'meego-7093' into idle-release 2010-09-28 23:30:58 -04:00
Len Brown
e9a64ed499 acpi_idle: add missing \n to printk
otherwise, these two lines print as one:

ACPI: acpi_idle yielding to intel_idle
ACPI: SSDT 3f5d8741 00203 (v02 PmRef  Cpu0Ist 00003000 INTL 20050624)

Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 23:30:40 -04:00
Namhyung Kim
3265eba0be intel_idle: add missing __percpu markup
intel_idle_cpuidle_devices is a percpu pointer
but was missing __percpu markup.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 23:30:39 -04:00
Thomas Weber
68f160125f intel_idle: Change mode 755 => 644
Remove execution permission from source file.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 23:30:39 -04:00
Lucas De Marchi
20e3341bb1 cpuidle: Fix typos
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 23:30:38 -04:00
Zhang Rui
337279ce3a ACPI: Disable Windows Vista compatibility for Toshiba P305D
Disable the Windows Vista (SP1) compatibility for Toshiba P305D.

http://bugzilla.kernel.org/show_bug.cgi?id=14736

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 22:48:55 -04:00
Andrea Gelmini
25cb1bfdd8 ACPI: Kconfig: fix typo.
"power of" -> "power off"

Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 21:38:20 -04:00
Lucas De Marchi
58f87ed0d4 ACPI: Fix typos
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 21:38:19 -04:00
Zhang Rui
e9f74c489c ACPI video: fix a poor warning message
Fix a vague warning message.

https://bugzilla.kernel.org/show_bug.cgi?id=16599

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 21:38:01 -04:00
Zhang Rui
ec652b351f ACPI: fix build warnings resulting from merge window conflict
drivers/acpi/sysfs.c:154: warning: passing argument 1 of '__check_old_set_param' from incompatible pointer type
include/linux/moduleparam.h:165: note: expected 'int (*)(const char *, struct kernel_param *)' but argument is of type 'int (*)(const char *, const struct kernel_param *)'

Introduced by commit 1c8fce27e2 ("ACPI:
introduce drivers/acpi/sysfs.c") interacting with commit
9bbb9e5a33 ("param: use ops in struct
kernel_param, rather than get and set fns directly").

Use module_param_cb instead of the obsoleted module_param_call to fix a build warning.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 21:38:01 -04:00
Wey-Yi Guy
62cb3c6ac4 iwlagn: API v5 for 6050 series device
For 6050 series device, change the supported API version

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28 17:43:10 -07:00
Shanyu Zhao
6d6a1afdc5 iwlwifi: send DC calib config to runtime ucode
Since uCode is responsible for doing DC calibration, there's no need
to let init uCode to do initial DC calibration then send results
back to driver, then driver sends the results to runtime uCode.
Driver can simply tell runtime uCode to do DC calibration.

Actually, this patch does not disable DC calib for init uCode. It just
prevent driver from saving and sending the DC calib results (from init
ucode) to runtime uCode. The driver still uses 0xffffffff in
CALIB_CFG_CMD for init ucode.

Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28 16:57:06 -07:00
Shanyu Zhao
02796d77cb iwlagn: set CSR register for 6050g2 devices
For 6050g2 devices driver needs to set a special bit to CSR register
so that uCode can do things correctly in calibration routines.

Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28 16:56:03 -07:00
Shanyu Zhao
6b5ce50142 iwlwifi: add iwl_nic_ops structure to iwl_ops
iwlwifi driver supports multiple devices. Since some device needs
special configuration we create a new iwl_nic_ops structure which is
configurable per device. Currently there is only one function pointer
inside this structure: additional_nic_config().

The iwl_nic_ops structure is added to the top level in struct iwl_ops,
making it easier to change per device. Duplication of the iwl_lib_ops
structure is no longer needed.

With this new ops the previous function pointer set_calib_version is
no longer needed since it is just a per device nic configuration.

As part of the code restructuring, a bug is addressed. Indication of
calib version to uCode is only needed for 6050 devices, however,
current implementation set calib version for all 6000 devices for
which DC calib is needed. To fix this, create iwl6050_ops for 6050
devices and only populate iwl_nic_ops in this structure.

Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28 16:55:25 -07:00
Jay Sternberg
1de19eccb3 iwlwifi: define 100 devices
add new structures and defines need to identify 100 devices.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28 16:52:35 -07:00
Chris Wilson
f573c66061 drm/i915/dvo: Fix panel and DDC i2c pins
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-28 23:34:44 +01:00
Chris Wilson
a8ed0b16a9 drm/i915: Tidy dvo_ch7017 and print out which chip we detect
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-28 23:33:17 +01:00
Len Brown
7a1d602f5f ACPI: EC: add Vista incompatibility DMI entry for Toshiba Satellite L355
https://bugzilla.kernel.org/show_bug.cgi?id=12641

Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 18:14:34 -04:00
Len Brown
bbb7030fbb ACPI: expand Vista blacklist to include SP1 and SP2
When we claim incompatibility with Vista,
include both Vista SP1 and SP2.

https://bugzilla.kernel.org/show_bug.cgi?id=12641

Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 17:48:49 -04:00
Len Brown
64a32307b7 ACPI: delete ZEPTO idle=nomwait DMI quirk
per comments in the bug report, this entry
seems to hurt at much as it helps.

https://bugzilla.kernel.org/show_bug.cgi?id=10807

Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 17:20:20 -04:00
Christian Lamparter
dc4769f0bb carl9170: interrupt urbs must not set URB_ZERO_PACKET
This patch fixes a bug in the driver which was
exposed by CONFIG_USB_DEBUG:
	"usb 1-1.6.3: BOGUS urb flags, 40 --> 0"

The transfer flag "URB_ZERO_PACKET" is only valid
for bulk urbs.

Reported-by: André Erdmann
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:58 -04:00
Bruno Randolf
eada7cad60 ath5k: Fix bitmasks and typos for PCU Diagnostic register
As reported by Ryan Niemi, some bitmasks in the register definition for the PCU
Diagnostic register (DIAG_SW) were missing a zero at the end. While at it fix
some typos and add more comments.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:57 -04:00
Bruno Randolf
28df897a42 ath5k: Disable interrupts in ath5k_hw_get_tsf64
The code in ath5k_hw_get_tsf64() is time critical and will return wrong results
if we get interrupted, so disable local interrupts.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:57 -04:00
Bruno Randolf
11f21df36c ath5k: Increase "fudge" for beacon timers
We use FUDGE to make sure the next TBTT is ahead of the current TU.
Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
configuration we need to make sure it is bigger than that.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:57 -04:00
Bruno Randolf
7f89612601 ath5k: Check and fix ATIM window
This patch adds sanity-checks for the beacon timers and especially the ATIM
window to ath5k. It is basically the same what i did for madwifi two years ago
and fixes a problem in IBSS mode which has been described as "ramping" pings.

See the code comments for a more detailed description and these links:

http://madwifi-project.org/ticket/1154
http://madwifi-project.org/changeset/3867
http://thread.gmane.org/gmane.linux.drivers.madwifi.devel/6066

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:57 -04:00
Bruno Randolf
4a79f2c517 ath5k: Remove unused variable for atim window
It's not used and it's unlikely we will ever implement ATIM.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:57 -04:00
Christian Lamparter
4bd437ea40 carl9170: revamp carl9170_tx_prepare
David Miller complained about the driver's excessive use
of variables in __packed structs. While I did not fully
agree with his sole "performance" argument on all accounts.
I do see some room for improvement in hot-paths on
architectures without an efficient access to unaligned
elements.

This first patch (dare I say?) optimizes an important tx
hot-path in the driver: carl9170_tx_prepare.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:56 -04:00
Christian Lamparter
9c655c8be9 carl9170: fix WARN_ON triggered by Broadcom HT STAs
Broadcom's Windows driver for the 4313 advertises
an ampdu density of 7 => 16 us. The AR9170 MAC on
the other hand only supports densities up to 8 us.

This patch removes the noisy WARN_ON, because
there is nothing we can do about it.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:56 -04:00
Christian Lamparter
cb139ecc0c carl9170: fix tx_ampdu_upload counter
tx_ampdu_upload was not decreased when an a-MPDU
frame had to be kicked out from the tx_pending
queues.

This broke ampdu aggregation, because the scheduler
waits until tx_ampdu_upload drops to zero, before
making the next aggregate.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:56 -04:00
Christian Lamparter
042c53f6e8 carl9170: remove lost-frame workaround
This patch removes some cruft, which survived
the RFC review phase.

Originally, carl9170_tx_ampdu_queue erroneously
dropped a lot of frames. As a result the ampdu
scheduler bogged down quite frequently and the
affected BA session timed out.

However this bug has been fixed and the WA and
its debugfs counter is no longer useful.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28 15:47:56 -04:00