Commit graph

134,929 commits

Author SHA1 Message Date
Mike Frysinger
b6de860651 rtc-bfin: fix state restoration when resuming
Much (but not all) of the RTC state is kept in the RTC peripheral which
has its own power domain.  Periodically (1 HZ), that state is synced from
one power domain to the other (peripheral->core).  When we are resuming,
we need to wait for the sync to occur so that we don't get a mismatch of
reading undefined state in the rest of the driver.

Further, once the externally maintained bits have been synced back into
the core, we then need to restore the bits maintained in the core.  In our
particular case, that is just the write completion interrupt bit.

If we don't do any of this, working with the RTC causes ~5 second delays
from time to time after waking up due to the write completion interrupt
never firing.

Reported-by: Michael Dean <mdean@aeronix.com>
Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:22 -07:00
Mike Frysinger
110b7e9698 rtc-bfin: fix inverted logic in suspend path
The int_clear helper takes a bitmask of interrupts to keep, not to
disable.  When suspending without wakeup enabled, we want to disable
all interrupts, so use 0 (keep none) instead of -1 (keep all).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:22 -07:00
David Vrabel
f3c65b2870 mmc: avoid getting CID on SDIO-only cards
The introduction of support for SD combo cards breaks the initialization
of all CSR SDIO chips.  The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR
chips to be reset (this is non-standard behavior).

When initializing an SDIO card check for a combo card by using the memory
present bit in the R4 response to IO_SEND_OP_COND (CMD5).  This avoids the
call to mmc_sd_get_cid() on an SDIO-only card.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Acked-by: Michal Mirolaw <mirq-linux@rere.qmqm.pl>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:22 -07:00
Linus Torvalds
152831be91 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  ARM: Update mach-types
  ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions"
  ARM: Ensure PTE modifications via dma_alloc_coherent are visible
  ARM: 6359/1: ep93xx: move clock initialization earlier
  Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"
  ARM: 6352/1: perf: fix event validation
  ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7
  ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM
  ARM: 6330/1: perf: reword comments relating to perf_event_do_pending
  ARM: pxa168fb: fix section mismatch
  ARM: pxa: Make id const in pwm_probe()
  ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300
  ARM: pxa: remove __init from cpufreq_driver->init()
  ARM: imx: set cache line size to 64 bytes for i.MX5
  mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function
  mxc/tzic: add base address when accessing TZIC registers
  ARM: mach-shmobile: ap4evb: fix write protect for SDHI1
  ARM: mach-shmobile: ap4evb: modify FSI2 ID
  ARM: mach-shmobile: do not enable the PLLC2 clock on init
  ARM: mach-shmobile: Clock framework comment fix
  ...
2010-09-09 18:31:34 -07:00
Russell King
de9ea203d1 Merge branch 'origin' 2010-09-09 22:38:43 +01:00
Cam Macdonell
0e52247a2e PCI: fix pci_resource_alignment prototype
This fixes the prototype for both pci_resource_alignment() and
pci_sriov_resource_alignment().

Patch started as debugging effort from Cam Macdonell.

Cc: Cam Macdonell <cam@cs.ualberta.ca>
Cc: Avi Kivity <avi@redhat.com>
[chrisw: add iov bits]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 13:41:25 -07:00
James Smart
78d16341fa [SCSI] scsi_transport_fc: fix blocked bsg request when fc object deleted
When an rport is "blocked" and a bsg request is received, the bsg request gets
placed on the queue but the queue stalls. If the fc object is then deleted - the
bsg queue never restarts and keeps the reference on the object, and stops the
overall teardown.

This patch restarts the bsg queue on teardown and drains any pending requests,
allowing the teardown to succeed.

Signed-off-by: Carl Lajeunesse <carl.lajeunesse@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:37:40 -05:00
Christof Schmitt
91978465b1 [SCSI] zfcp: Reorder registration of initial SCSI device
Make sure that the rport registration did complete and then register
SCSI device directly. Otherwise the unit_enqueue would race with the
call to zfcp_scsi_queue_unit_register.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:36:44 -05:00
Wayne Boyer
634651fab3 [SCSI] ipr: reverse the isr optimization changes
The isr optimization patch that was submitted a few months ago
exposed problems with receiving and handling spurious HRRQ interrutps.

commit 64ffdb7622
Author: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Date:   Wed May 19 11:56:13 2010 -0700

    [SCSI] ipr: improve interrupt service routine performance

That patch is reverted with this one.  A new patch will be submitted
once the issue is better understood and properly handled in the driver.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:36:15 -05:00
Martin K. Petersen
6014759c92 [SCSI] scsi_debug: Update thin provisioning support
The previous thin provisioning support was not very user friendly
because it depended on all the relevant options being set on the command
line.

Implement support for the Thin Provisioning VPD page from SBC3 r24 and
add module options for TPU (UNMAP) and TPWS (WRITE SAME (16) with UNMAP
bit).  This allows us to have sane default and to enable thin
provisioning with a simple tpu=1 or tpws=1 on the command line depending
on whether we want UNMAP or WRITE SAME behavior.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:34:40 -05:00
Randy Dunlap
47259658ed [SCSI] fix kconfig dependency warnings related to SCSI_SAS_ATTRS
Fix kconfig dependency warnings in scsi/Kconfig:

warning: (SCSI_SAS_LIBSAS && SCSI || SCSI_MPT2SAS && SCSI_LOWLEVEL && PCI && SCSI || FUSION_SAS && FUSION && PCI && SCSI) selects SCSI_SAS_ATTRS which has unmet direct dependencies (SCSI && BLK_DEV_BSG)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:34:01 -05:00
Dan Carpenter
0caeb91c8d [SCSI] pm8001: handle allocation failures
Return -ENOMEM if the allocations fail.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:31:54 -05:00
Randy Dunlap
e6d4ef4509 [SCSI] iscsi transport: fix kernel-doc notation
Fix typo in scsi_transport_iscsi.c kernel-doc notation:

Warning(drivers/scsi/scsi_transport_iscsi.c:548): No description found for parameter 'cmd'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:30:08 -05:00
Heiko Carstens
b40d8ed4e4 topology/sysfs: Provide book id and siblings attributes
Create attributes:

 /sys/devices/system/cpu/cpuX/topology/book_id
 /sys/devices/system/cpu/cpuX/topology/book_siblings

which show the book id and the book siblings of a cpu.

Unlike the attributes for SMT and MC these attributes are only present if
CONFIG_SCHED_BOOK is set. There is no reason to pollute sysfs for every
architecture with unused attributes.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100831082844.435648457@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:41:25 +02:00
Tejun Heo
f1f5a807b0 ahci: fix hang on failed softreset
ahci_do_softreset() compared the current time and deadline in reverse
when calculating timeout for SRST issue.  The result is that if
@deadline is in future, SRST is issued with 0 timeout, which hasn't
caused any problem because it later waits for DRDY with the correct
timeout.  If deadline is already exceeded by the time SRST is about to
be issued, the timeout calculation underflows and if the device
doesn't respond, timeout doesn't trigger for a _very_ long time.

Reverse the incorrect comparison order.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Gwendal Grignou <gwendal@google.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-09 14:19:18 -04:00
Jean Delvare
673424c089 pata_artop: Fix device ID parity check
x % 1 always evaluates to 0, which clearly isn't the intent. The
author probably had "% 2" or "& 1" in mind, and mispelled it.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-09 14:19:18 -04:00
Chris Wilson
5ba2aaaaa1 drm/i915/debug: Include Ironlake in self-refresh status
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09 19:14:06 +01:00
Chris Wilson
df0e924883 drm/i915: Make the connector->encoder relationship explicit
Currently we have a exact mapping of a connector onto an encoder for its
whole lifetime. Make this an explicit property of the structure and so
simplify the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:43 +01:00
Chris Wilson
f875c15a4f drm/i915: Use the direct mapping of pipe->crtc
Why iterate all the crtcs to find the pipe, when we already know which
crtc is attached to which pipe?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:36 +01:00
Chris Wilson
4ef69c7a64 drm/i915: Rename intel_encoder->enc to base for consistency
[Patch is slightly larger than is strictly necessary to fixup
surrounding checkpatch.pl errors.]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:13 +01:00
Linus Torvalds
26a94e81de Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix hang with modified FIN handling on A0 cards
  RDMA/nes: Change state to closing after FIN
  RDMA/nes: Fix double CLOSE event indication crash
  RDMA/nes: Write correct register write to set TX pause param
  RDMA/cxgb3: Don't exceed the max HW CQ depth
2010-09-09 08:58:52 -07:00
James Bottomley
3a5c19c23d [SCSI] fix use-after-free in scsi_init_io()
we're using a pointer through a freed command to reset the request,
which has shown up as an oops with slab poisoning:

Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 09:58:18 -05:00
Chris Wilson
7839d956fc drm/i915: Double check that the wait_request is not pending before warning
If we are busy, then we may have woken up the wait_request handler but
not yet serviced it before the hang check fires. So in hang check,
double check that the i915_gem_do_wait_request() is still pending the
wake-up before declaring all hope lost.

Fixes regression with e78d73b16b.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30073
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09 09:18:00 +01:00
David S. Miller
e199e6136c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-09-08 23:49:04 -07:00
Greg Kroah-Hartman
6b5e073663 Staging: fix Makefile so broadcom driver will actually build.
It would be nice if people tested their patches before sending
them to me...

Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 23:14:18 -07:00
Henry Ptasinski
a9533e7ea3 Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 23:09:11 -07:00
Linus Walleij
25c8e03bdb spi/pl022: move probe call to subsys_initcall()
The PL022 SPI bus is sometimes used for early stuff like
regulators that need to be present at module_init() time, so
we move this to a subsys_initcall().

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08 22:50:10 -06:00
Eric Dumazet
972c40b5be KS8851: Correct RX packet allocation
Use netdev_alloc_skb_ip_align() helper and do correct allocation

Tested-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:47:13 -07:00
Stephen Hemminger
f27e21a813 atlx: make strings const
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:32:12 -07:00
Nikitas Angelinas
baa5251e8c Staging: vt6656: use ARRAY_SIZE macro in channel.c
Replace (sizeof(ChannelRuleTab) / sizeof(ChannelRuleTab[0])) with
ARRAY_SIZE(ChannelRuleTab) in drivers/staging/vt6656/channel.c

Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:31:25 -07:00
Maurice Dawson
842ec6ba3b Staging: comedi: fix space coding style issue in adl_pci9111.c
This is a patch to the adl_pci9111.c file that fixes up multiple please,
no space for starting a line warnings, found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:31:24 -07:00
Ondrej Zary
92e32eaee2 cxacru: ignore cx82310_eth devices
Ignore ADSL routers, which can have the same vendor and product IDs
as ADSL modems but should be handled by the cx82310_eth driver.

This intentionally ignores device IDs that aren't currently handled
by cx82310_eth. There may be other device IDs that perhaps shouldn't
be claimed by cxacru.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:29:20 -07:00
Vipin Mehta
fbc69d379c staging: ath6kl: Eliminating the symlink to 2.0 header files
Moving the AR6002 hw 2.0 specific register definitions files from
the hw.0 directory to a new directory, 'hw' within hw2.0.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:26:41 -07:00
Mike McCormack
533d1ffe41 Staging: rtl8192e: Less verbose function headers
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:26 -07:00
Mike McCormack
7f440f49d1 Staging: rtl8192e: Fix indent in some places
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:25 -07:00
Mike McCormack
1dc4dbbf7b Staging: rtl8192e: Remove some redundant comments
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:25 -07:00
Mike McCormack
51ae5d558f Staging: rtl8192e: Remove extern and redundant declarations
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:24 -07:00
Mike McCormack
196bd68726 Staging: rtl8192e: Remove function with no effect
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:23 -07:00
Mike McCormack
b6d5e884ab Staging: rtl8192e: Remove unused macros
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:22 -07:00
Mike McCormack
f347140583 Staging: rtl8192e: Remove some commented out code
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:22 -07:00
Mike McCormack
d5abdf72be Staging: rtl8192e: Remove function name comments at end of functions
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:21 -07:00
Mike McCormack
49e57f2fc0 Staging: rtl8192e: Remove some redundant code
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:21:20 -07:00
Stephen Hemminger
f8942e07a3 staging: Beeceem USB Wimax driver
The Sprint 4G network uses a Wimax dongle with Beecem
chipset. The driver is typical of out of tree drivers, but
maybe useful for people, and the hardware is readily available.

Here is a staging ready version (i.e warts and all)

0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1
1. Consolidated files in staging
2. Remove Dos cr/lf
3. Remove unnecessary ioctl from usbbcm_fops

Applied patches that were in the developer pack, surprising
there were ones for 2.6.35 already.

This is compile tested only, see TODO for what still needs
to be done.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08 21:15:06 -07:00
Daniel De Graaf
7808121b9a xenbus: avoid zero returns from read()
It is possible to get a zero return from read() in instances where the
queue is not empty but has no elements with data to deliver to the user.
Since a zero return from read is an error indicator, resume waiting or
return -EAGAIN (for a nonblocking fd) in this case.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-09-09 10:48:22 +10:00
Colin Cross
152e1d5920 PM: Prevent waiting forever on asynchronous resume after failing suspend
During suspend, the power.completion is expected to be set when a
device has not yet started suspending.  Set it on init to fix a
corner case where a device is resumed when its parent has never
suspended.

Consider three drivers, A, B, and C.  The parent of A is C, and C
has async_suspend set.  On boot, C->power.completion is initialized
to 0.

During the first suspend:
suspend_devices_and_enter(...)
 dpm_resume(...)
  device_suspend(A)
  device_suspend(B) returns error, aborts suspend
 dpm_resume_end(...)
   dpm_resume(...)
    device_resume(A)
     dpm_wait(A->parent == C)
      wait_for_completion(C->power.completion)

The wait_for_completion will never complete, because
complete_all(C->power.completion) will only be called from
device_suspend(C) or device_resume(C), neither of which is called
if suspend is aborted before C.

After a successful suspend->resume cycle, where B doesn't abort
suspend, C->power.completion is left in the completed state by the
call to device_resume(C), and the same call path will work if B
aborts suspend.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-09-09 00:49:43 +02:00
Greg Rose
2b1b8edfe2 ixgbevf: Removed unneeded HW struct members
The VF has no flash and can only do memory mapped I/O.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 14:46:29 -07:00
Joe Perches
7ca647bdad drivers/net/ixgbe/ixgbe_main.c: Add ixgbe_psum
Reduce indentation in a couple of places
Add static function ixgbe_psum
Add temporary for adapter->stats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 14:46:28 -07:00
Joe Perches
c7689578f5 drivers/net/ixgbe/ixgbe_main.c: Use pr_<level>
Did not add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
because no printk in this module used message prefixing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 14:46:28 -07:00
Joe Perches
e8e9f6966a drivers/net/ixgbe/ixgbe_main.c: Checkpatch cleanups
Whitespace cleanups.
Move inline keyword after function type declarations.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 14:46:27 -07:00
Alexander Duyck
933d41f1f2 ixgbe: fix TX ring enable issues seen when VMDQ is enabled
The ordering of operations was messed up in the init and as a result when
VMDQ was enabled we were trying to enable TX rings before setting the VFTE
bits. This resulted in a ring that appeared to fail to enable when in fact
it was blocked because the VFTE bits were cleared after the reset.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 14:46:26 -07:00