Commit graph

134,929 commits

Author SHA1 Message Date
Kulikov Vasiliy
3a8f2d3c71 staging: rtl8187e: call disable_pci_device() if pci_probe() failed
Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:09 -07:00
Dan Carpenter
f090386309 Staging: quickstart: acpi_status is unsigned
acpi_bus_register_driver() returns an int, not acpi_status.  It returns
zero on success and negative error codes on failure, but acpi_status is
unsigned.  We can just use "ret" here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:09 -07:00
Dan Carpenter
0b6e7220ed Staging: ti-st: writing past end of array
In the original source it would write past the end of the array before
returning the error code.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:09 -07:00
Dan Carpenter
2a8a4b7530 Staging: rtl8192e: add curly braces to if statement
In the original code there was some extra semicolons after the if
statement:
	if (!channel_map[ieee->current_network.channel]);
						       ^^^
>From the indenting it looked like that should be curly braces instead.

Also I made some white space changes to stop checkpatch.pl from
complaining.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:08 -07:00
Dan Carpenter
f22f99e101 Staging: lirc: remove unneeded variable
We never use control_req so I removed it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:08 -07:00
Kulikov Vasiliy
4fd09f900a staging: spectra: call disable_pci_device() if pci_probe() failed
Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:08 -07:00
Kulikov Vasiliy
beef969724 staging: rtl8187se: call disable_pci_device() if pci_probe() failed
Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:07 -07:00
Kulikov Vasiliy
036b00e091 staging: crystalhd: call disable_pci_device() if pci_probe() failed
Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:48:07 -07:00
Javier Martinez Canillas
b6cdc4056f staging: xgifb: use DEFINE_PCI_DEVICE_TABLE() macro
Use DEFINE_PCI_DEVICE_TABLE() to make xgifb_pci_table const and marked as __devinitconst

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:30 -07:00
Javier Martinez Canillas
16f08494f4 staging: comedi (cb_pcidas): use PCI_DEVICE() macro
This is the first of a patch series that uses PCI_DEVICE() macro for pci table entries on comedi drivers and thus improving readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:30 -07:00
Javier Martinez Canillas
07c2412a5e staging: comedi (cb_pcidda): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:30 -07:00
Javier Martinez Canillas
0924f2f06b staging: comedi (cb_pcidio): user PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:29 -07:00
Javier Martinez Canillas
e43d94e52a staging: comedi (rtd520): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:29 -07:00
Javier Martinez Canillas
51a6c8d058 staging: comedi (me4000): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:29 -07:00
Javier Martinez Canillas
37907697db staging: comedi (cb_pcimdas): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:29 -07:00
Javier Martinez Canillas
81b621dafc staging: comedi (adv_pci_dio): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:29 -07:00
Javier Martinez Canillas
e27b81d5bb staging: comedi (adl_pci6208): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:28 -07:00
Javier Martinez Canillas
20b6a7f3d5 staging: comedi (adl_pci9118): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:28 -07:00
Javier Martinez Canillas
7af6fb13ca staging: comedi (skel): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:28 -07:00
Javier Martinez Canillas
d991058efb staging: comedi (adv_pci1710): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:28 -07:00
Javier Martinez Canillas
494a3dd3b9 staging: comedi (adv_pci1723): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:27 -07:00
Javier Martinez Canillas
7feb75ac05 staging: comedi (cb_pcidas64): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:27 -07:00
Javier Martinez Canillas
a9ef0a8fab staging: comedi (dt3000): use PCI_DEVICE() macro
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 14:32:27 -07:00
Neil Munro
4819a3667e Staging: RT2860: Fixed the spacing error in oid.h
Fixed the single spacing error in oid.h.

Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:54:30 -07:00
Neil Munro
a2b4e5f447 Staging: RT2860: Fixed both coding style errors in eeprom.h
Fixed two coding style errors in the form of pointer style issues in eeprom.h.

Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:53:20 -07:00
Roberto Rodriguez Alkala
bed49c6945 staging: otus: fix compile warning and some style issues
In today linux-next I got a compile warning in staging/otus driver.
This patch solves the issue and also improves the coding style.

Signed-off-by: Roberto Rodriguez Alcala <rralcala@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:52:30 -07:00
Denis Kirjanov
1033f1f7ef Staging: slicoss: Remove explicit arch dependencies
Remove explicit arch dependencies

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:52:28 -07:00
Luis R. Rodriguez
904879748d ath9k_hw: fix parsing of HT40 5 GHz CTLs
The 5 GHz CTL indexes were not being read for all hardware
devices due to the masking out through the CTL_MODE_M mask
being one bit too short. Without this the calibrated regulatory
maximum values were not being picked up when devices operate
on 5 GHz in HT40 mode. The final output power used for Atheros
devices is the minimum between the calibrated CTL values and
what CRDA provides.

Cc: stable@kernel.org [2.6.27+]
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31 14:52:23 -04:00
Luis R. Rodriguez
803288e61e ath9k_hw: Fix EEPROM uncompress block reading on AR9003
The EEPROM is compressed on AR9003, upon decompression
the wrong upper limit was being used for the block which
prevented the 5 GHz CTL indexes from being used, which are
stored towards the end of the EEPROM block. This fix allows
the actual intended regulatory limits to be used on AR9003
hardware.

Cc: stable@kernel.org [2.6.36+]
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31 14:52:23 -04:00
Manuel Stahl
11f05c7715 staging: iio: hmc5843 change ABI to comply with documentation
this one completes my last patch set to compile fine for all drivers.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Datta, Shubhrajyoti <shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:48 -07:00
Manuel Stahl
4f64b80144 staging: iio sync scale units
g     -> ms/s^2
deg   -> rad
deg/s -> rad/s
some temperatures still broken

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:03 -07:00
Manuel Stahl
51a0a5b021 staging: iio sync drivers with current ABI
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:02 -07:00
Manuel Stahl
5770b8ffaf staging: iio partial documentation update
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:02 -07:00
Manuel Stahl
bf32963cbe staging: iio move scan_elements into ring buffer
tested with sca3000, adis16400

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:02 -07:00
Manuel Stahl
07e6229e42 staging: iio: lis3l02dq adjust lis3l02dq_configure_ring
Now fits other driver's structure for easier modification.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:01 -07:00
Manuel Stahl
ffcab07a74 staging: iio rename ring attributes
bps -> bytes_per_datum
ring_enable -> enable

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:42:01 -07:00
Dan Carpenter
213fd22704 Staging: iio: signedness bug
i2c_smbus_read_byte_data() returns an s32 type.  We need to change
"rate" to signed for the error handling to work.

Also I changed it to propogate the error code instead of just returning
-EINVAL.  Other error codes could be -EAGAIN for example.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:40:35 -07:00
Julia Lawall
d1ae4da731 drivers/staging/iio: call mutex_unlock in error handling code
Adjust the error handling code so that it benefits from the call to
mutex_unlock at the end of the function.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@rcu exists@
position p1;
expression E;
@@

mutex_lock@p1(E);
...
mutex_unlock(E);

@exists@
position rcu.p1;
expression E;
@@

*mutex_lock@p1(E);
... when != mutex_unlock(E);
?*return ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:40:35 -07:00
Dan Carpenter
e3a92cdedf Staging: vt6656: problems in error handling
The first kfree(pDevice) is pointless because pDevice is NULL.  The
second kfree(pDevice) is a double free because pDevice is the driver's
private data and that is already freed by free_netdev(netdev).  Also the
free_netdev() error path doesn't call usb_put_dev().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:35:06 -07:00
Luis Bosch
fe149785a4 staging: vt6656: resolved checkpatch finding
Added spaces in for loop arguments.

Signed-off-by: Luis Bosch <luis.bosch@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:35:06 -07:00
Victor Rosales
62e7e96148 staging: vt6656: removed extra spaces
Removed spaces between functions name and parenthesis.

Signed-off-by: Victor Rosales <victorhrosales@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:35:05 -07:00
Alejandro Emanuel Paredes
4846cbc13a staging: vt6656: changed comments convention and removed spaces before tab
resolved checkpatch finding

Signed-off-by: Alejandro Emanuel Paredes <aleparedes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:34:53 -07:00
Andres More
731047f904 staging: vt6656: removed macro to test bits
Removed custom macro used to test bits.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:31:26 -07:00
Andres More
27264fb8c7 staging: vt6656: removed NDIS_STATUS int redefinition
Removed int redefinition for function results.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:31:26 -07:00
Andres More
203e4615ee staging: vt6656: removed custom definitions of Ethernet packet types
Removed some unused definitions of Ethernet packet types, also replaced
two of them with in-kernel counterparts from include/linux/if_ether.h

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:31:25 -07:00
Ivan Gomez Castellanos
bd5dc30e3e staging: tidspbridge: Remove services.c and services.h
The services_init() and services_exit() functions don't do anything,
so they are removed, and as these are the only two functions defined
in services.c and services.h, then these files are also removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:23:17 -07:00
Ivan Gomez Castellanos
220344f254 staging: tidspbridge: Remove cfg.c and cfg.h files
So far, the cfg.c file is empty, and the function prototypes in cfg.h
are not used in any place. So they can be removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:23:16 -07:00
Ivan Gomez Castellanos
b87561f748 staging: tidspbridge: Remove cfg_set_object()
As the services directory is going to be removed, the cfg_set_object
function has also to be removed.

Since the driver object handle is retrieved from the drv_data structure,
then the word "Registry" is replaced by "driver data" in the comments.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:23:16 -07:00
Ivan Gomez Castellanos
a47d4deebf staging: tidspbridge: Remove cfg_set_dev_object()
As the services directory is going to be removed, the cfg_set_dev_object
function has also to be removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:23:16 -07:00
Ivan Gomez Castellanos
73b87a9166 staging: tidspbridge: Remove cfg_get_object()
As the services directory is going to be removed, the cfg_get_object
function has also to be removed.

Since the driver object handle is retrieved from the drv_data structure,
then the word "Registry" is replaced by "driver data" in the comments.

Also, the hdrv_obj is not used in function omap34_xx_bridge_remove(), so
it is removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:23:15 -07:00