Commit graph

134,929 commits

Author SHA1 Message Date
Eric Miao
c9840daa70 [ARM] pxa: correct SSCR0_SCR to support multiple SoCs
The previous definitions of SSCR0_SCR and SSCR0_SerClkDiv() prevented
them being used simultaneously when supporting multiple PXA SoCs, esp.
in drivers/spi/pxa2xx_spi.c, make them correct.

The change from SSCR0_SerClkDiv(2) to SSCR0_SCR(2), will make the result
a little bit different in pxa2xx_spi_probe(), however, since that's only
used as a default initialization value, it's acceptable.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:57 +02:00
Eric Miao
5700929d22 input: remove now deprecated corgi_ts.c touchscreen driver
The corgi touchscreen is now deprecated in favour of the generic ads7846.c
driver. The noise reduction technique used in corgi_ts.c, which is to wait
till vsync before ADC sampling, is also integrated into ads7846 driver now.
Provided that the original driver is not generic and is difficult to maintain,
it will be removed now.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-05-11 17:24:57 +02:00
Antonio Ospite
81cd584394 HID: hidraw: fix indentation
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:47:55 +02:00
Rafi Rubin
ab3f4980ec HID: ntrig: add filtering module parameters
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:45:22 +02:00
Rafi Rubin
eab32f5f65 HID: ntrig: add sysfs access to filter parameters
This should make it a little more convenient to tweak the filtering
parameters on the fly.  Also unlike load-time parameters, this provides
independent tuning for each device conntected.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:45:22 +02:00
Rafi Rubin
369db2a600 HID: ntrig: add sensitivity and responsiveness support
The old rejection size thresholds were too high for the 12" devices.
Larger surfaces like the Dell Studio17 exacerbated the problem since
contact size is reported on the same logical scale, making a contact
look smaller to the larger screen.

Since we have observed erroneous ghost events from these devices we
still need to filter the incoming stream.

The prior size threshold filter is still in place, though with
defaults set to leave it off.

This patch adds the two new classes of filters, those that reject
live frames before activation, and those that reject empty frames
until deactivation.  These filters are expressed in terms of a
simple state machine for clarity (I hope).

The activation filter has two components, slack and size, events
are discarded until either is satisfied.  Slack is defined as
the number of seemingly good contacts to read before accepting the
stream as valid (if the threshold is reached in the middle of a frame
the remainder of that frame is still discarded).

The deactivation filter discards empty frames until hitting a
deactivate slack.  This time measured in frames.  N-Trig devices
emit 5-8 (observed so far) empty frames at the end of multitouch
activity.  Ignoring the first few enables us to safely and gracefully
handle erroneous empty frames, thus preventing a change in the tool
state which would otherwise result in things like broken lines or
dragged objects being dropped in bad places.

Also, now that devices with different logical densities have
been observed, the aforementioned sizes are scaled from physical
to logical scales once those scales are identified.  Hopefully this
should mean that a given threshold value means the same thing across
differing devices.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:45:22 +02:00
Bill Pemberton
83897badcb agp: use NULL instead of 0 when pointer is needed
Fixes sparse warning:

drivers/char/agp/generic.c:1217:33: warning: Using plain integer as
NULL pointer

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:11:09 +02:00
Bill Pemberton
8356dda2a5 PCI: make bitfield unsigned
Fix sparse warning:

drivers/pci/pci.h:247:25: error: dubious one-bit signed bitfield

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
CC: linux-pci@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:07:20 +02:00
Bill Pemberton
c2d45b4da0 cciss: fix shadows sparse warning
Fix sparse warnings:

drivers/block/cciss.c:1591:37: warning: symbol 'i' shadows an earlier one
drivers/block/cciss.c:2437:21: warning: symbol 'i' shadows an earlier one

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 09:59:26 +02:00
Henrik Rydberg
0559a53889 hwmon: (applesmc) Correct sysfs fan error handling
The current code will not remove the sysfs files for fan numbers three
and up. Also, upon exit, fans one and two are removed regardless of
their existence.  This patch cleans up the sysfs error handling for
the fans.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-11 09:17:47 +02:00
Ken Milmore
d1bf8cf6b9 hwmon: (asc7621) Bug fixes
* Allow fan minimum RPM to be set to zero without triggering alarms.
* Fix voltage scaling arithmetic and correct scale factors.
* Correct fan1-fan4 alarm bit shifts.
* Correct register address for temp3_smoothing_enable.
* Read the alarm registers with high priority.

Signed-off-by: Ken Milmore <ken.milmore@googlemail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-11 09:17:46 +02:00
Sergei Shtylyov
a9ddabc52c cmd640: fix kernel oops in test_irq() method
When implementing the test_iqr() method, I forgot that this driver is not an
ordinary PCI driver and also needs to support VLB variant of the chip. Moreover,
'hwif->dev' should be NULL, potentially causing oops in pci_read_config_byte().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-11 00:08:03 -07:00
Randy Dunlap
2395e463fe paride: fix menu indentation
Make the PARIDE menu be displayed correctly, with proper/expected
indentation, by moving the GDROM kconfig symbol, which was
splitting the PARIDE kconfig symbol from its dependent symbols.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-11 09:02:55 +02:00
Marek Vasut
513d8be988 Input: iforce - fix Guillemot Jet Leader 3D entry
USB ID entry for "Guillemot Jet Leader 3D" in iforce-main.c did not match
one used in iforce-usb.c

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-10 22:54:39 -07:00
Marek Vasut
d861f7bf14 Input: iforce - add Guillemot Jet Leader Force Feedback
This device features a RUDDER on the knob.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-10 22:54:24 -07:00
David S. Miller
de02d72bb3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-05-10 22:53:41 -07:00
Alex Deucher
8bf3aae621 drm/radeon/kms: fix copy pasto in disable encoders patch
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-11 14:53:56 +10:00
Jean Delvare
c9ff04c941 drm/radeon: Fix 3 regressions - since buffer rework
Commit b4fe945405 introduced 3 bugs,
fix them:

* Use the right command dword for second packet offset in
  RADEON_CNTL_PAINT/BITBLT_MULTI.
* Don't leak memory if drm_buffer_copy_from_user() fails.
* Don't call drm_buffer_unprocessed() unless drm_buffer_alloc() and
  drm_buffer_copy_from_user() have been called successfully first.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-11 14:01:48 +10:00
Johannes Berg
db125c787b iwlwifi: clear driver stations when going down
During a hw restart, mac80211 will attempt to
reconfigure all stations. Currently, that fails
and leads to warnings because we still have the
stations marked active. Therefore, clear all
stations when doing down.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:08 -07:00
Johannes Berg
63d4176933 iwlwifi: remove pointless HT check
Remove the check before invoking iwl_set_ht_add_station(),
since neither of the conditions in this check makes sense,
as either we pass in a NULL ht_info (first branch) or in
the IBSS case an ht_info with ht_enabled=false.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:07 -07:00
Johannes Berg
57f8db8934 iwlwifi: rename iwl_add_local_station
This function is now only used for the special
IBSS BSSID station, so rename it to indicate
this. The new name is iwl_add_bssid_station.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:07 -07:00
Johannes Berg
c1182743b6 iwlwifi: move iwl_find_station() to 4965
4965 code is the only thing that now still
needs iwl_find_station(), so move it there
and make it static. Everything else can
rely on the station data passed by mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:06 -07:00
Johannes Berg
bdbb612fb2 iwlwifi: use iwl_sta_id() for TKIP key update
With the station ID being stored in the
station struct, which mac80211 gives us
for TKIP phase 1 key updates, we can also
remove the use of iwl_find_station() in
that code path.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:06 -07:00
Johannes Berg
619753ff57 iwlagn: use iwl_sta_id() for aggregation
With the station ID being stored in the
station struct, which mac80211 gives us
for aggregation callbacks, we can also
remove the use of iwl_find_station() in
those code paths.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:06 -07:00
Johannes Berg
2a87c26bbe iwlwifi: use iwl_find_station less
Since we now store the station ID in each station
struct, many places need not look at the station
table any more since they can just pull the station
ID out of the struct. Remove iwl_get_sta_id() and
use iwl_sta_id() instead as appropriate.

This reduces the amount of code needed to find the
right station significantly, and works since
mac80211 passes the station only after it has been
fully initialised, ie. even if TX races with
station addition it will only be passed to TX once
the addition is complete.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:05 -07:00
Johannes Berg
64ba9a54c6 iwlwifi: add iwl_sta_id()
In places where the station struct is
guaranteed to exist (presumably), use
this helper to get the station ID out
of it (and warn if there's no station
struct after all).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:04 -07:00
Johannes Berg
fd1af15d0a iwlwifi: track station IDs
mac80211 allows us to store private data per
station, so put the station ID there. This
allows us to avoid the station ID lookup when
removing regular stations. To also be able to
avoid the lookup to remove the special IBSS
BSSID station, track its ID in the per-vif
private data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:04 -07:00
Wey-Yi Guy
4ff739747d iwlwifi: provide more comments for cfg structure
Provide comments for newly added cfg parameters

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:03 -07:00
Wey-Yi Guy
470356b891 iwlwifi: "tx power per chain" are part of ucode_tx_stats
Move "tx power per chain" into ucode_tx_stats, it is debugging
information provided by uCode as part of statistics notification.

The "tx power per chain" parameters are optional parameters which only
supported by 6000 series device today; those are reserved fields for all
the other devices.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:03 -07:00
Reinette Chatre
3bce606626 iwlagn: work around rate scaling reset delay
When station is using an HT channel to communicate to AP and communication
is lost then driver will first be notified that channel is not an HT
channel anymore before AP station is removed. A consequence of that is that
the driver will know that it is not communicating on HT anymore, but the
rate scaling table is still under the impression it is operating in HT. Any
time after driver has been notified channel is not HT anymore there will
thus be a firmware SYSASSERT when the current active LQ command is sent.

A workaround for this issue is to not send a LQ command in the short time between
being notified channel is not HT anymore and rate scaling table being
updated.

This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2173

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:02 -07:00
Johannes Berg
2c810ccdba iwlwifi: rework broadcast station management
Currently, the broadcast station is managed along
with the interface type, rather than always being
present. That leads to a bug with injection -- it
is currently not possible to inject frames when
the only virtual interface is a monitor, because
in that the required broadcast station is missing.

Additionally, allocating and deallocating the
broadcast station's LQ all the time is wasteful,
and the code to support this is fairly complex.

So this changes completely the way we manage the
broadcast station. Rather than manage it along
with any interface, we now allocate it when we
bring the device up, and remove it again when we
bring the device down. When we bring the device
up, we don't immediately program the broadcast
station into it, instead we just mark it active
and rely on the next restore cycle to upload it
to the device. This works because an unassociated
RXON is always required at least once to set up
device parameters, which implies a reprogramming
of stations into the device.

As we now manage all stations properly, there no
longer is a need for forcing a clearing of them
via iwl_clear_ucode_stations(), which can become
a lot simpler.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:02 -07:00
Johannes Berg
a6a0345c83 iwlwifi: split allocation/sending local station LQ
Rename iwl_sta_init_lq to iwl_sta_alloc_lq and
move sending it out into the caller.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:02 -07:00
Johannes Berg
156b70d17c iwlwifi: fix iwl_sta_init_lq station ID
The "is_ap" argument to iwl_sta_init_lq is never true,
so it and the corresponding code can be removed. However,
it needs to have the station ID because it is also used
for the IBSS BSSID station, and that doesn't have the
broadcast ID.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:01 -07:00
Johannes Berg
59c02b4149 iwlwifi: note that priv->bssid is used only by 3945
The bssid member of struct iwl_priv is now
only used by 3945 code, so note that. It
shouldn't be used by any other code in the
future.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:01 -07:00
Johannes Berg
ca3c1f59dc iwlwifi: use vif in iwl_ht_conf
Pass the virtual interface pointer to iwl_ht_conf()
so it doesn't need to rely on iw_mode and other
global variables.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:09:00 -07:00
Johannes Berg
3a065ab3b5 iwlwifi: remove useless priv->vif check
This check is not useful, since we now no
longer dereference priv->vif at this spot.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:59 -07:00
Johannes Berg
832f47e333 iwlagn: use virtual interface in TX aggregation handling
Most of the TX aggregation handling can be passed
the virtual interface directly instead of having
to rely on priv->vif.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:59 -07:00
Johannes Berg
1dda6d2837 iwlwifi: push virtual interface through
Rather than keeping every bit of information
around in priv and the virtual interface, add
a virtual interface to many functions and use
the information directly from it.

This removes beacon_int, assoc_capability and
assoc_id from struct iwl_priv.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:58 -07:00
Johannes Berg
3474ad635d iwlwifi: apply filter flags directly
Since iwl_configure_filter can now sleep since
the mac80211 callback was changed, we can now
apply filter flags changes directly.

Also, while at it, make the code a bit more
generic with a local macro. There's no need
to check changed_flags since we apply all at
the same time anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:58 -07:00
Johannes Berg
eafdfbd32a iwlagn: use vif->type to check station
We need not check iw_mode, since we have
the vif pointer available.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:57 -07:00
Johannes Berg
93286db501 iwlagn: move iwl_get_ra_sta_id to 4965
This function is only needed by 4965, so
it need not be in core code and can be
made static.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:57 -07:00
Johannes Berg
159605dd5e iwlwifi: remove rts_threshold
We never use that member of struct iwl_priv.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:56 -07:00
Abhijeet Kolekar
a29576a784 iwl3945: add plcp error checking
Add plcp error checking for 3945. After threshold of plcp
is reached , it resets the radio

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:56 -07:00
Johannes Berg
dd7a2509b3 iwlagn: implement loading a new firmware file type
The old firmware file type does not allow indicating
any firmware capabilities, which we frequently want
to make things easier.

This implements a new firmware type that is based on
a TLV structure, and adds a TLV for the maximum length
of probe requests in scans.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:55 -07:00
Johannes Berg
0e9a44dc0b iwlagn: prepare for new firmware file format
Currently the first four bytes in a firmware file
indicate the major, minor and api versions as well
as the serial number. These combined can never be
zero, so we can use that special case for a new,
future, file format.

This patch simply shuffles the code and prepares
for that new format.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:55 -07:00
Johannes Berg
d1358f62d4 iwlwifi: move eeprom version printout to eeprom init
It doesn't belong into firmware loading,
it should instead be printed after loading
the EEPROM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:54 -07:00
Johannes Berg
22adba2a69 iwlwifi: remove ucode virtual functions
AGN devices all use the same ucode operations,
except for 4965, because 4965 uses only v1 file
headers.

Therefore, we can remove all the indirection
we have here and just code the API distinction
in place, with a small special case for 4965.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:54 -07:00
Johannes Berg
93b1a2f919 iwl3945: remove ucode access indirection
As these function pointers will always point to
the 3945 functions, we can just call them directly
and avoid the indirection.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:53 -07:00
Johannes Berg
3e4de7616f iwlagn: show and store firmware build number
We currently display the build number only if debugging
is enabled, but it is really helpful so show it all the
time. Also store it so it can be retrieved later via
ethtool.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:53 -07:00
Johannes Berg
1fa61b2e79 iwlwifi: manage IBSS station properly
Currently iwlwifi will eventually exhaust the station
table when adding the BSSID station for IBSS mode,
unless the interface is set down.

The new mac80211 ibss joined/left notification allows
us to fix that easily by moving the code to add the
IBSS station to the notification, and also adding
code to remove it again when we leave the IBSS.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10 15:08:53 -07:00