Commit graph

134,929 commits

Author SHA1 Message Date
Jens Axboe
6a7cc883d6 Merge branch 'for-jens' of git://git.drbd.org/linux-2.6-drbd into for-linus 2010-05-04 08:48:53 +02:00
Florian Ragwitz
e938fbfd4a Input: elantech - ignore high bits in the position coordinates
In older versions of the elantech hardware/firmware those bits always
were unset, so it didn't actually matter, but newer versions seem to
use those high bits for something else, screwing up the coordinates
we report to the input layer for those devices.

Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03 23:35:11 -07:00
Florian Ragwitz
f81bc788ff Input: elantech - allow forcing Elantech protocol
Apparently hardware vendors now ship elantech touchpads with different version
magic. This options allows for them to be tested easier with the current driver
in order to add their magic to the whitelist later.

Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03 23:34:33 -07:00
Florian Ragwitz
225c61aad3 Input: elantech - fix firmware version check
The check determining whether device should use 4- or 6-byte packets
was trying to compare firmware with 2.48, but was failing on majors
greater than 2. The new check ensures that versions like 4.1 are
checked properly.

Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03 23:34:13 -07:00
Jarod Wilson
5132088697 Input: ati_remote - add some missing devices from lirc_atiusb
The (out-of-tree) lirc_atiusb driver has a much longer list of devices
it supports.  Some of them look like they may just be guesses at possible
device IDs, but a few are definitely confirmed devices.  This adds the
nVidia-branded RF receiver and the X10 Lola Wireless Video Sender device
(which contains an RF receiver) to the list of devices in ati_remote.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03 23:33:22 -07:00
David S. Miller
0a12761bcd forcedeth: Kill NAPI config options.
All distributions enable it, therefore no significant body of users
are even testing the driver with it disabled.  And making NAPI
configurable is heavily discouraged anyways.

I left the MSI-X interrupt enabling thing in an "#if 0" block
so hopefully someone can debug that and it can get re-enabled.
Probably it was just one of the NVIDIA chipset MSI erratas that
we work handle these days in the PCI quirks (see drivers/pci/quirks.c
and stuff like nvenet_msi_disable()).

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:33:05 -07:00
Eric Miao
16b32e0c9e Input: remove obsolete {corgi,spitz,tosa}kbd.c
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03 23:32:22 -07:00
Tom Herbert
53f224cc5f forcedeth: GRO support
Add GRO support to forcedeth.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:24:19 -07:00
David S. Miller
1827d2e943 net: ep93xx_eth stops receiving packets
Receiving small packet(s) in a fast pace leads to not receiving any
packets at all after some time.

After ethernet packet(s) arrived the receive descriptor is incremented
by the number of frames processed. If another packet arrives while
processing, this is processed in another call of ep93xx_rx. This
second call leads that too many receive descriptors getting released.

This fix increments, even in these case, the right number of processed
receive descriptors.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 23:21:27 -07:00
David S. Miller
52a60ed2da phy/micrel: Add module device ID table for autoloading.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:48:29 -07:00
David S. Miller
0f7ca5917e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-05-03 15:45:52 -07:00
David J. Choi
d050700918 drivers/net/phy: micrel phy driver
This is the first version of phy driver from Micrel Inc.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:43:26 -07:00
Michael S. Tsirkin
55afbd0810 macvtap: add ioctl to modify vnet header size
This adds TUNSETVNETHDRSZ/TUNGETVNETHDRSZ support
to macvtap.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
2010-05-04 01:35:47 +03:00
Peter Korsgaard
e9162ab161 dm9601: fix phy/eeprom write routine
Use correct bit positions in DM_SHARED_CTRL register for writes.

Michael Planes recently encountered a 'KY-RS9600 USB-LAN converter', which
came with a driver CD containing a Linux driver. This driver turns out to
be a copy of dm9601.c with symbols renamed and my copyright stripped.
That aside, it did contain 1 functional change in dm_write_shared_word(),
and after checking the datasheet the original value was indeed wrong
(read versus write bits).

On Michaels HW, this change bumps receive speed from ~30KB/s to ~900KB/s.
On other devices the difference is less spectacular, but still significant
(~30%).

Reported-by: Michael Planes <michael.planes@free.fr>
CC: stable@kernel.org
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:26:30 -07:00
David S. Miller
26d27844df Revert "ixgbe: disable MSI-X by default on certain Cisco adapters"
This reverts commit d5ffd75a27.

As requested by Jeff Kircher.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 15:18:22 -07:00
Phil Carmody
9414e99672 oprofile: protect from not being in an IRQ context
http://lkml.org/lkml/2010/4/27/285

Protect against dereferencing regs when it's NULL, and
force a magic number into pc to prevent too deep processing.
This approach permits the dropped samples to be tallied as
invalid Instruction Pointer events.

e.g. output from about 15mins at 10kHz sample rate:
Nr. samples received: 2565380
Nr. samples lost invalid pc: 4

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-03 23:02:39 +02:00
Lars Ellenberg
5c3c7e64bb drbd: don't expose failed local READ to upper layers
fix regression introduced in 8.3.3:
 commit a9b17323f2875f5d9b132c2b476a750bf44b10c7
 Author: Lars Ellenberg <lars.ellenberg@linbit.com>
 Date:   Wed Aug 12 15:18:33 2009 +0200

     out-of-spinlock completion of master bio

 : (bio_rw(bio) == READA)
    ? read_completed_with_error
    : read_ahead_completed_with_error;

is obviously not what was intended.

No one noticed because of
 * page-cache at work,
 * local RAIDs

Impact:
Failed local READs are not retried remotely,
but errored to upper layers, causing filesystems
to remount read-only, or worse.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-03 22:40:16 +02:00
Simon Arlott
19937d0482 ppp_generic: handle non-linear skbs when passing them to pppd
Frequently when using PPPoE with an interface MTU greater than 1500,
the skb is likely to be non-linear. If the skb needs to be passed to
pppd then the skb data must be read correctly.

The previous commit fixes an issue with accidentally sending skbs
to pppd based on an invalid read of the protocol type. When that
error occurred pppd was reading invalid skb data too.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 13:27:00 -07:00
Simon Arlott
ea8420e9f5 ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
In ppp_input(), PPP_PROTO(skb) may refer to invalid data in the skb.

If this happens and (proto >= 0xc000 || proto == PPP_CCPFRAG) then
the packet is passed directly to pppd.

This occurs frequently when using PPPoE with an interface MTU
greater than 1500 because the skb is more likely to be non-linear.

The next 2 bytes need to be pulled in ppp_input(). The pull of 2
bytes in ppp_receive_frame() has been removed as it is no longer
required.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 13:27:00 -07:00
John W. Linville
52c7738618 iwmc3200wifi: fix busted iwm_debugfs_init definition
Looks like we missed removing the return statement in the non-CONFIG_IWM_DEBUG
dummy implementation of iwm_debugfs_init...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 16:21:10 -04:00
John W. Linville
1d7d969dd0 Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 2010-05-03 14:53:49 -04:00
Xose Vazquez Perez
12ef116bf7 wireless: rt2x00: rt2800usb: be in sync with latest windows drivers.
0x07d1,0x3c17 D-Link Wireless N 150 USB Adapter DWA-125
0x1b75,0x3071 Ovislink Airlive WN-301USB
0x1d4d,0x0011 Pegatron Ralink RT3072 802.11b/g/n Wireless Lan USB Device
0x083a,0xf511 Arcadyan 802.11 USB Wireless LAN Card
0x13d3,0x3322 AzureWave 802.11 n/g/b USB Wireless LAN Card

Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:12 -04:00
Johannes Berg
23ff98fc21 mac80211_hwsim: fix double-scan detection
Currently, hwsim will always detect a double scan
after the first one has finished ...

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:11 -04:00
Johannes Berg
a75b4363ea mac80211: allow controlling aggregation manually
This allows enabling TX and disabling both TX and
RX aggregation sessions manually in debugfs. It is
very useful for debugging session initiation and
teardown problems since with this you don't have
to force a lot of traffic to get aggregation and
thus have less data to analyse.

Also, to debug mac80211 code itself, make hwsim
"support" aggregation sessions. It will still just
transfer the frame, but go through the setup and
teardown handshakes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:10 -04:00
David Kilroy
07cefe7ac9 orinoco_usb: implement fw download
This involves some refactorring of the common fw download code to
substitute ezusb versions of various functions.

Note that WPA-enabled firmwares (9.xx series) will not work fully with
orinoco_usb yet.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:09 -04:00
David Kilroy
fc97431a50 orinoco_usb: avoid in_atomic
We expect to be either in process contect or soft interrupt context. So
use in_softirq instead.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:08 -04:00
David Kilroy
9afac70a73 orinoco: add orinoco_usb driver
This driver uses the core orinoco modules for the bulk of
the functionality. The low level hermes routines (for local bus
cards) are replaced, the driver supplies its own ndo_xmit_start
function, and locking is done with the _bh variant.

Some recent functionality is not available to the USB cards yet
(firmware loading and WPA).

Out-of-tree driver originally written by Manuel Estrada Sainz.

Thanks to Mark Davis for supplying hardware to test the updates.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:08 -04:00
David Kilroy
bcad6e80f3 orinoco: encapsulate driver locking
Local bus and USB drivers will need to do locking differently.

The original orinoco_usb patches had a boolean variable controlling
whether spin_lock_bh was used, or irq based locking. This version
provides wrappers for the lock functions and the drivers specify the
functions pointers needed.

This will introduce a performance penalty, but I'm not expecting it to
be noticable.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:07 -04:00
David Kilroy
593ef09c9e orinoco: allow driver to specify netdev_ops
Allow the main drivers to specify a custom version of the net_device_ops
structure. This is required by orinoco_usb to supply a separate transmit
function.

Export existing net_device_ops callbacks so that the drivers can reuse
some of the existing code.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:06 -04:00
David Kilroy
b42f2074de orinoco: add hermes_ops
Pave the way for introducing USB alternative functions.

Force callers to dereference ops instead of providing wrappers.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:53:06 -04:00
John W. Linville
c7ab1a4dcb b43legacy: Added get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:51:47 -04:00
John W. Linville
354b4f04f2 b43: Added get_survey callback in order to get channel noise
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:51:46 -04:00
John W. Linville
91639c76bf rt2x00: remove now unused noise field from struct rxdone_entry_desc
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
2010-05-03 14:51:46 -04:00
John W. Linville
1f55c12cef iwmc3200wifi: cleanup unneeded debugfs error handling
"iwl: cleanup: remove unneeded error handling" missed the one in
if_sdio_debugfs_init().

I don't think we even need to check -ENODEV ourselves because if
DEBUG_FS is not compiled in, all the debugfs utility functions will
become no-op.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03 14:46:37 -04:00
Antonio Ospite
fddb33f2e8 HID: sony: fix sony_set_operational_bt
Don't send the report type as part of the data, this prevents the
controller from going into the operational state at all.

This is completely equivalent to what the code originally meant to accomplish:
as per in net/bluetooth/hidp/core.c::hidp_output_raw_report(), by using
HID_FEATURE_REPORT here, what will be actually sent is
(HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE) which is exactly 0x53.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 17:19:03 +02:00
Linus Torvalds
37e27e36bc Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
2010-05-03 07:54:08 -07:00
Henrik Kretzschmar
7d7fb0e6eb cocbalt_lcdfb: correct sections
Since the drivers probe call was changed from .init.text
to .devinit.text in commit c2e13037e6
the fb_fix_screeninfo structure must be
changed from .init.data to .devinit.data, too.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 15:42:58 +02:00
Bruno Prémont
9d71ea057b HID: add PM support to PicoLCD device
Add PM support in order to turn off backlight on suspend, restore
it on resume and especially restore complete state on reset-resume.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 15:25:52 +02:00
Jiri Kosina
d6d53cbc6b Merge branch 'hid-suspend' into picolcd 2010-05-03 15:25:35 +02:00
Rafi Rubin
ed7e2ca24b HID: ntrig: Remove unused macro, TripleTap and QuadTap
Removing the higher number taps.  Their usage was incorrect
and even if correct they should not be used for a touch screen.
_MT_ events should be used to communicate multiple fingers.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 15:23:11 +02:00
Rafi Rubin
250d377522 HID: ntrig: TipSwitch for single touch mode touch.
Include TipSwitch in the touch detection decision for some single touch
firmwares.  Confidence and InRange are high for all finger events
including those used to indicate the finger is no longer in contact with
the sensor.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 15:23:11 +02:00
Dinh Nguyen
5a25ad84e0 mxc: Add generic USB HW initialization for MX51
This patch adds USB HW initializiation code to /plat-mxc/ehci.c.
	-Sets some specific PHY settings
Renames mxc_set_usbcontrol to mxc_initialize_usb_hw.
Adds new register bit defines for the USB HW on Freescale
SoCs.

This patch applies to 2.6.34-rc6.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-03 15:18:13 +02:00
Dominik Brodowski
cc83b08fc7 pcmcia: avoid pccard_validate_cis failure in resume callpath
If the PCMCIA CIS changed before a resume event (e.g. due to
a card exchange while being suspended, possibly also during
a call to "pccardctl reset"), also set the function count to
zero so that the subsequent call to pccard_validate_cis() does
not fail.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-03 14:34:44 +02:00
Michael S. Tsirkin
d9d52b5178 tun: add ioctl to modify vnet header size
virtio added mergeable buffers mode where 2 bytes of extra info is put
after vnet header but before actual data (tun does not need this data).
In hindsight, it would have been better to add the new info *before* the
packet: as it is, users need a lot of tricky code to skip the extra 2
bytes in the middle of the iovec, and in fact applications seem to get
it wrong, and only work with specific iovec layout.  The fact we might
need to split iovec also means we might in theory overflow iovec max
size.

This patch adds a simpler way for applications to handle this,
and future proofs the interface against further extensions,
by making the size of the virtio net header configurable
from userspace. As a result, tun driver will simply
skip the extra 2 bytes on both input and output.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
2010-05-03 12:33:13 +03:00
Wim Van Sebroeck
d557f651b3 watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT.
Fix the MODULE_PARM_DESC so that the code can compile again.

reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-03 08:58:56 +00:00
Ingo Molnar
53ba4f2fa7 Merge commit 'v2.6.34-rc6' into core/locking 2010-05-03 09:17:01 +02:00
Kevin Cernekee
70d38b9625 UBI: remove reboot notifier
The UBI reboot notifier causes problems with hibernation.  Move this
functionality into the low-level MTD driver instead.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-05-03 09:08:13 +03:00
David S. Miller
7ef527377b Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-05-02 22:02:06 -07:00
Herbert Xu
df2071bd08 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2010-05-03 11:28:58 +08:00
Dmitry Kasatkin
8628e7c890 crypto: omap - sha1 & md5 driver
Earlier kernel contained omap sha1 and md5 driver, which was not maintained,
was not ported to new crypto APIs and removed from the source tree.

- implements async  crypto API using dma and cpu.
- supports multiple sham instances if available
- hmac
- concurrent requests

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-03 11:10:59 +08:00