Commit graph

134,929 commits

Author SHA1 Message Date
Axel Lin
ee7aa6ce41 Input: kbtab - fix incorrect size parameter in usb_buffer_free
The size allocated by usb_buffer_alloc() is 8, however the size passed
to usb_buffer_free() is 10.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 22:34:30 -07:00
Dmitry Torokhov
893d1cdd53 Input: acecad - don't advertise mouse events
The device does not emit events for left/right/middle mouse buttons
so it should not mark them as supported in capabilities bitmaps.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 22:34:24 -07:00
Dmitry Torokhov
b426571cea Input: acecad - fix some formatting issues
Also switch to using input_set_abd_params() helper.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 22:34:19 -07:00
Dmitry Torokhov
5492f6f801 Input: acecad - simplify usb_acecad_disconnect()
There is no need to check whether acecad structure is attached to the
interface; if it isn't and we are called we have much bigger problems.
Also no need to call usb_kill_urb() in usb_acecad_disconnect() since
it is being called in usb_acecad_close().

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 22:34:15 -07:00
Axel Lin
2ef2ed5976 Input: acecad - fix incorrect size parameter in usb_buffer_free
The size allocated by usb_buffer_alloc() is 8, however the size passed to
usb_buffer_free() in usb_acecad_disconnect() is 10.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 22:34:09 -07:00
Philippe De Muyter
2545cf6e94 m68knommu: allow 4 coldfire serial ports
Fix driver/serial/mcf.c for 4-ports coldfire's (e.g. MCF5484).

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21 14:56:00 +10:00
Philippe De Muyter
3732b68f22 m68knommu: fix coldfire tcdrain
Fix tcdrain on coldfire uarts.
Currently with coldfire uarts tcdrain returns without waiting for txempty,
because (tx)fifosize is 0.  Fix that and call uart_update_timeout when
setting the baud rate, otherwise tcdrain will wait for an half our :)
Also constify mcf_uart_ops.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-04-21 13:43:06 +10:00
David S. Miller
cb903bf4ee tg3: Enable GRO by default.
This was merely an oversight when I added the *_gro_receive()
calls.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 18:49:45 -07:00
David S. Miller
e4fc9d15db niu: Enable GRO by default.
This was merely an oversight when I added the napi_gro_receive()
calls.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 18:44:52 -07:00
David S. Miller
e46754f8c9 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-04-20 17:57:56 -07:00
Eric Dumazet
aa39514516 net: sk_sleep() helper
Define a new function to return the waitqueue of a "struct sock".

static inline wait_queue_head_t *sk_sleep(struct sock *sk)
{
	return sk->sk_sleep;
}

Change all read occurrences of sk_sleep by a call to this function.

Needed for a future RCU conversion. sk_sleep wont be a field directly
available.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 16:37:13 -07:00
Chris Ball
c205d93253 viafb: Add 1200x900 DCON/LCD panel modes for OLPC XO-1.5
[jc: extensive merge conflict fixes]
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-04-20 14:23:20 -06:00
Jonathan Corbet
1317824376 viafb: complete support for VX800/VX855 accelerated framebuffer
This patch is a painful merge of change
a90bab567ece3e915d0ccd55ab00c9bb333fa8c0 (viafb: Add support for 2D
accelerated framebuffer on VX800/VX855) in the OLPC tree, originally by
Harald Welte.  Harald's changelog read:

	The VX800/VX820 and the VX855/VX875 chipsets have a different 2D
    	acceleration engine called "M1".  The M1 engine has some subtle
    	(and some not-so-subtle) differences to the previous engines, so
    	support for accelerated framebuffer on those chipsets was disabled
    	so far.

This merge tries to preserve Harald's changes in the framework of the
much-changed 2.6.34 viafb code.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20 14:23:20 -06:00
Harald Welte
107ea34db4 viafb: Determine type of 2D engine and store it in chip_info
This will help us for the upcoming support for 2D acceleration using
the M1 engine.

[jc: fixed merge conflicts]
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
2010-04-20 14:23:19 -06:00
Jonathan Corbet
f1b99aa9db viafb: Unify duplicated set_bpp() code
As suggested by Florian: make both mode-setting paths use the same code.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20 14:23:19 -06:00
Jonathan Corbet
9ca43cf41d viafb: Retain GEMODE reserved bits
Commit c3e2567384 (viafb: 2D engine rewrite)
changed the setting of the GEMODE register so that the reserved bits are no
longer preserved.  Fix that; at the same time, move this code to its own
function and restore the use of symbolic constants.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20 14:23:19 -06:00
Jonathan Corbet
1b1f8cd299 viafb: Unmap the frame buffer on initialization error
This was part of Harald's "make viafb a first-class citizen using
pci_driver" patch, but somehow got dropped when that patch went into
mainline.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20 14:23:18 -06:00
Harald Welte
b72a5070c7 viafb: use proper pci config API
This patch alters viafb to use the proper Linux in-kernel API to access
PCI configuration space, rather than poking at I/O ports by itself.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
2010-04-20 14:23:18 -06:00
Harald Welte
109771a68b viafb: Fix various resource leaks during module_init()
The current code executed from module_init() in viafb does not have
proper error checking and [partial] resoure release paths in case
an error happens half way through driver initialization.

This patch adresses the most obvious of those issues, such as a
leftover i2c bus if module_init (and thus module load) fails.

[jc: fixed merge conflicts]
[jc: also restored -ENOMEM return on ioremap() fail]

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
2010-04-20 14:23:18 -06:00
Linus Torvalds
27ee896370 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix error handling in cm4000_cs.c
  drivers/pcmcia: Add missing local_irq_restore
  serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33)
  pcmcia: avoid late calls to pccard_validate_cis
  pcmcia: fix ioport size calculation in rsrc_nonstatic
  pcmcia: re-start on MFC override
  pcmcia: fix io_probe due to parent (PCI) resources
  pcmcia: use previously assigned IRQ for all card functions
2010-04-20 09:21:19 -07:00
Linus Torvalds
186837ca3a Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: delay vblank cleanup until after driver unload
2010-04-20 09:20:11 -07:00
Felix Fietkau
58b5190e74 ath9k: set the STBC flag in rate control if the peer supports it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:52:39 -04:00
Felix Fietkau
074a8c0db2 ath9k: add support for Tx and Rx STBC
Supported only for single stream rates by the hardware

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:52:36 -04:00
Felix Fietkau
3bb065a742 ath9k: initialize the number of tx/rx streams correctly
AR9300 based hardware can 3x3 MCS rates, this should be set in the
HT capabilities.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:54 -04:00
Felix Fietkau
c666387682 ath9k: reduce the bits_per_symbol table size, support more streams
Instead of increasing bits_per_symbol for supporting more streams, keep
it single-stream only and multiply the values by the numer of streams.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
0e668cde0d ath9k: update the ath_max_4ms_framelen table
Include MCS0-31 and also add SGI for HT20. This makes it
possible to support more different rate combinations with
newer hardware.

Based on a patch by Selvam. T.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
7817e4ceb6 ath9k: update the MCS mask for MCS16 and above
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
0a8cea844d ath9k: clean up tx buffer handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
c9c99e5e44 ath9k: check for specific rx stuck conditions and recover from them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:52 -04:00
Holger Schurig
55ee82b500 ath5k: basic support for survey
This adds the first element of survey data, the noise floor figure.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:52 -04:00
Holger Schurig
1289723ef2 mac80211: sample survey implementation for mac80211 & hwsim
This adds the survey function to both mac80211 itself and to mac80211_hwsim.
For the latter driver, we simply invent some noise level.A real driver which
cannot determine the real channel noise MUST NOT report any noise, especially
not a magically conjured one :-)

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:52 -04:00
Daniel Yingqiang Ma
03ceedea97 ath9k: Group Key fix for VAPs
When I set up multiple VAPs with ath9k, I encountered an issue that
the traffic may be lost after a while.

The detailed phenomenon is
1. After a while the clients connected to one of these VAPs will get
into a state that no broadcast/multicast packets can be transfered
successfully while the unicast packets can be transfered normally.
2. Minutes latter the unitcast packets transfer will fail as well,
because the ARP entry is expired and it can't be freshed due to the
broadcast trouble.

It's caused by the group key overwritten and someone discussed this
issue in ath9k-devel maillist before, but haven't work out a fix yet.

I referred the method in madwifi, and made a patch for ath9k.
The method is to set the high bit of the sender(AP)'s address, and
associated that mac and the group key. It requires the hardware
supports multicast frame key search. It seems true for AR9160.

Not sure whether it's the correct way to fix this issue. But it seems
to work in my test. The patch is attached, feel free to revise it.

Signed-off-by: Daniel Yingqiang ma <yma.cool@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:51 -04:00
Lin Ming
0f849d2cc6 ACPICA: Minimize the differences between linux GPE code and ACPICA code base
We have ported Rafael's major GPE changes
(ACPI: Use GPE reference counting to support shared GPEs) into ACPICA code base.
But the port and Rafael's original patch have some differences, so we made
below patch to make linux GPE code consistent with ACPICA code base.

Most changes are about comments and coding styles.
Other noticeable changes are based on:

Rafael: Reduce code duplication related to GPE lookup
https://patchwork.kernel.org/patch/86237/

Rafael: Always use the same lock for GPE locking
https://patchwork.kernel.org/patch/90471/

A new field gpe_count in struct acpi_gpe_block_info to record the number
of individual GPEs in block.

Rename acpi_ev_save_method_info to acpi_ev_match_gpe_method.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Lin Ming
aa2110cb1a ACPI: add boot option acpi=copy_dsdt to fix corrupt DSDT
Some BIOS on Toshiba machines corrupt the DSDT, so add a new
boot option acpi=copy_dsdt to workaround it.
Add warning message to ask users to use this option if corrupt DSDT detected.

Also build a DMI blacklist to check it and automatically copy DSDT.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Bob Moore
43323cb4c4 ACPICA: Update DSDT copy/detection.
Move initialization of DSDT pointer. Emit address of DSDT
in the dump of both table headers (good/bad DSDT).
Now handles the case where the root table can be reallocated,
which would invalidate the original pointer.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Lin Ming
69ec87efa8 ACPICA: Add subsystem option to force copy of DSDT to local memory
Optionally copy the entire DSDT to local memory (instead of
simply mapping it.) There are some BIOSs that corrupt or replace
the original DSDT, creating the need for this option. Default is
FALSE, do not copy the DSDT.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Lin Ming
729df0f848 ACPICA: Add detection of corrupted/replaced DSDT
This change adds support to detect a DSDT that has been corrupted
and/or replaced from outside the OS (by firmware). This is
typically catastrophic for the system, but has been seen on
some machines.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Bob Moore
c1637e9c64 ACPICA: Add write support for DataTable operation regions
The original implementation only supported reading from a DataTable
region. However, some machines have been seen that actually write
to the ACPI table contained in such a region. This change adds
support for writing to a DataTable region.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:15 -04:00
Alexey Starikovskiy
333b04ae33 ACPICA: Fix for acpi_reallocate_root_table for incorrect root table copy
When copying the root table to the new allocation, the length
used was incorrect. The new size was used instead of the current
table size, meaning too much data was copied.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:15 -04:00
Bob Moore
a7499bc84e ACPICA: Update comments/headers, no functional change
Also split some long lines.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:15 -04:00
Lin Ming
e0f40281d5 ACPICA: Fix for possible fault in acpi_ex_release_mutex
Fixed a problem with the AML Mutex handling function
acpi_ex_release_mutex where the function could fault under the very
rare condition when the interpreter has blocked, the interpreter
lock is released, the interpreter is then reentered via the
same thread, and attempts to acquire a mutex that was previously
acquired. FreeBSD report 140979.

http://www.freebsd.org/cgi/query-pr.cgi?pr=140979

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:53 -04:00
Bob Moore
f6a22b0bc4 ACPICA: Standardize integer output for ACPICA warnings/errors
Always use 0x prefix for hex output, use %u for integer output
(all integers are unsigned.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:52 -04:00
Lin Ming
4cdf1a562b ACPICA: Enhance configuration for output of AML Debug Object
This change will enable debug object output via a global variable,
acpi_gbl_enable_aml_debug_object. This will help with remote machine
debugging. Also, moved all debug object support code to a new
file, exdebug.c. Entire debug object module can now be
configured out of the ACPICA build if desired.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:49 -04:00
H Hartley Sweeten
1ca5d2f019 mtd/maps/physmap: catch failure to register MTD_PHYSMAP_COMPAT device
If the default Kconfig values are used with MTD_PHYSMAP_COMPAT you end
up with a resource where end < start.  This causes __request_resource to
return a conflict which then returns an -EBUSY error code.  The current
physmap.c code just assumes that the platfom_device_register will always
succeed.

Catch this failure during the physmap_init and propogate the error.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-04-20 08:53:52 +01:00
Daniel Mack
7fbef0d1e2 Input: eeti_ts - cancel pending work when going to suspend
This fixes a race between the suspend code and input events.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 00:44:20 -07:00
Takashi Iwai
5f57d67da8 Input: Add support of Synaptics Clickpad device
The new type of touchpads can be detected via a new query command
0x0c. The clickpad flags are in cap[0]:4 and cap[1]:0 bits.

When the device is detected, the driver now reports only the left
button as the supported buttons so that X11 driver can detect that
the device is Clickpad. A Clickpad device gives the button events
only as the middle button. The kernel driver morphs to the left
button. The real handling of Clickpad is done rather in X driver
side.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 00:42:40 -07:00
Dmitry Torokhov
6d327cb03f Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops"
This reverts commit 5e28d8eb68 since
the magic knock does not work for this model of the touchpad and the
device stays in PS/2 compatibility mode.
2010-04-20 00:37:21 -07:00
Dave Airlie
10fd883ce3 agp/intel: put back check that we have a driver for the bridge.
On my 945 laptop + radeon GPU, I was getting an oops on boot without this
check which seems to have gotten dropped in the rework.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 16:38:18 +10:00
Dave Airlie
d4b74bf078 Revert "drm/i915: Configure the TV sense state correctly on GM45 to make TV detection reliable"
Eric mentioned on irc this patch was bad, so revert it.

This reverts commit fb8b5a39b6.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:25:51 +10:00
Jesse Barnes
b78315f051 drm: delay vblank cleanup until after driver unload
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload
paths, so don't clean up the vblank related structures until after
driver unload.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:22:38 +10:00