- Redesign the verifier error reporting: failures now carry source and
instruction annotations along with the causal event history that led
to them, making program rejections far easier to debug and repair
(Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and security
community needs where the kernel runs the signature verification at
BPF_PROG_LOAD time before the LSM admission hook (Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify kfunc
arguments purely from BTF into a generated bpf_func_proto which is
computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags
(Avinash Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for() loops
no longer pay a kfunc call on every iteration (Puranjay Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID sets
and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock instead
of relying on the verifier's hard-coded allowlist (Kaitao Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized kernel
heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release instructions
(Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and account
for preempt and IRQ disabled regions as overlapping RCU protection
(Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed may_goto
support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign tasks
and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap() O(1)
instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended register
where the REX prefix dropped the high destination register bit
(Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths
(Yiyang Chen)
- Fix the trampoline handling of 128-bit arguments and of return values
larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena, trampolines,
sockmap, cgroup, ring buffer, x86/arm64/riscv/s390 JITs, libbpf,
bpftool, resolve_btfids and selftests.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCaoNzBBUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIOb3QEAy5cyrLXY+VWofhsC9wULkHyETOdj
oTkdohQomZp4VhEA/1RZXdHVS1ANFgreWv0fMorUOHEKv2ZuNokfk3LWgW4L
=VRyL
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
-----BEGIN PGP SIGNATURE-----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=7+OR
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
"Core:
- fix long-standing force-feedback initialization race across the
subsystem (Dmitry Torokhov)
- switch to system_dfl_wq (Marco Crivellari)
AMD-SFH:
- support for tablet-mode switch for AMD SFH-based systems (Basavaraj
Natikar)
HyperX:
- support for HyperX QuadCast 2 (Benjamin Blume)
I2C-HID:
- support for devices that provide HID descriptor solely through
the ACPI _DSM method (XIE Zhibang)
Intel-THC-HID:
- support for full I2C bus config parameters (Even Xu)
Logitech:
- HID++ 2.0 repogrammable button support (Elliot Douglas)
- Bolt receiver support for HID++ devices (Erik Håkansson)
MSI:
- support for MSI Claw (Derek J. Clark)
Steam:
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
And many, many other fixes for various long standing issues that were
found by new modern tools, and quite a few device ID additions"
* tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (146 commits)
HID: tmff: Use 64-bit arithmetic for force feedback scaling
HID: multitouch: reclassify HTIX5288 to WIN_8_FORCE_MULTI_INPUT_NSMU
HID: sensor: custom: Fix field sysfs group cleanup on failure
HID: sensor: custom: Fix use-after-free in enable_sensor
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
HID: haptic: don't write an uninitialized value to unhandled usages
HID: intel-thc-hid: intel-quickspi: fix autosuspend cleanup during teardown
HID: intel-thc-hid: intel-quicki2c: fix autosuspend cleanup during teardown
HID: steam: Zero out inputs when disabling gamepad mode
HID: steam: Clean up locking
HID: steam: Don't set feature reports when disconnecting
HID: steam: Fix wording of connect/disconnect logs
HID: steam: Initial 2026 Steam Controller support
HID: steam: Refactor registration
HID: logitech: add Bolt receiver support for Logitech HID++ devices
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
HID: universal-pidff: stop the device when force-feedback init fails
HID: haptic: move FF initialization into .input_configured()
HID: logitech-hidpp: move FF initialization to .input_configured()
HID: megaworld: move FF initialization to .input_configured()
...
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improvements and code refactoring (Vicki Pfau)
The logical minimum and maximum values come from the HID report
descriptor and cover the full signed 32-bit range. Subtracting them in
an int can overflow before the force feedback value is scaled. The
subsequent multiplication can overflow as well, producing an incorrect
value despite the final range checks.
Use 64-bit intermediates for both scaling helpers, as done by commit
48d1677779 ("HID: pidff: Fix integer overflow in pidff_rescale") for
the same arithmetic in the PID driver. This keeps the arithmetic
defined for the complete descriptor range before the result is clamped.
Fixes: dc76c91214 ("Input: use new FF interface in the HID force feedback drivers")
Fixes: b27c9590ca ("HID: add support for Thrustmaster FGT Force Feedback wheel")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit b5e65ae557 ("HID: multitouch: Add quirk for Hantick 5288
touchpad") assigned MT_CLS_NSMU to the HTIX5288 (0911:5288). This was
necessary because the device sometimes fails to send touch release
signals when transitioning from >=2 fingers to <2 fingers, and
MT_QUIRK_NOT_SEEN_MEANS_UP fixes stuck touches by treating missing
contacts as released.
However, MT_CLS_NSMU only carries MT_QUIRK_NOT_SEEN_MEANS_UP. It
lacks MT_QUIRK_CONTACT_CNT_ACCURATE and MT_QUIRK_IGNORE_DUPLICATES.
As a result, after a two-finger scroll finger lift, the device still
reports stale coordinates from the released contact in subsequent
frames, and the driver overwrites the remaining active slot with
those frozen coordinates. The remaining finger appears stuck at the
lift position until all fingers are lifted.
This was confirmed via evtest on Arch Linux 7.1.3: after
TRACKING_ID=-1 for the released slot, every subsequent frame contained
duplicate position pairs -- the real moving finger's coordinates
followed by the lifted finger's frozen position, both attributed to
the active slot.
Reclassify the device to MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU
(0x0018), which preserves the original MT_QUIRK_NOT_SEEN_MEANS_UP
fix while adding the necessary Win8 quirks (CONTACT_CNT_ACCURATE,
IGNORE_DUPLICATES), preventing stale coordinate contamination.
The additional FORCE_MULTI_INPUT flag is harmless here: it separates
the mouse and touchpad collections into distinct input devices,
which is the standard behavior libinput already expects.
Fixes: b5e65ae557 ("HID: multitouch: Add quirk for Hantick 5288 touchpad")
Signed-off-by: Xianglin Lin <1021538027@qq.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array.
Fixes: 4a7de0519d ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519d ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
quickspi_hid_raw_request() receives the caller's buffer length in len, but
quickspi_get_report() never sees it and copies the whole device-supplied
response into buf regardless:
memcpy(buf, qsdev->report_buf, qsdev->report_len);
qsdev->report_len comes from the input report the touch controller returns,
while buf is sized to whatever the caller asked hidraw for through
HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf
with device-controlled content.
The intel-quicki2c sibling already passes the caller length down to
quicki2c_get_report() and validates the response against it before the
copy. Do the same here.
Fixes: 4138f21115 ("HID: intel-thc-hid: intel-quickspi: Complete THC QuickSPI driver")
Suggested-by: Sashiko AI <sashiko-bot@kernel.org>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
fill_effect_buf() initializes value only for the four haptic usages
handled by its switch, but writes it to field->value[] for every usage.
An unhandled usage can therefore receive either an uninitialized value
or one left over from the previous usage. hid_output_report() then
serializes that value into the effect's report buffer.
Skip unhandled usages instead. This also matches switch_mode(), which
only updates fields it recognizes.
Found with Clang's -Wconditional-uninitialized.
Fixes: 344ff35849 ("HID: haptic: initialize haptic device")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
quickspi_probe() calls pm_runtime_use_autosuspend(), but
quickspi_remove() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
remove path.
This issue was found by manual code inspection.
Fixes: 6912aaf3fd ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
quicki2c_probe() calls pm_runtime_use_autosuspend(), but
quicki2c_remove() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
remove path.
This issue was found by manual code inspection.
Fixes: 5f420e8215 ("HID: intel-thc-hid: intel-quicki2c: Add PM implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When gamepad mode is disabled the gamepad input devices will stop receiving
updates. However, in the case where there are buttons still pressed this
will appear as an indefinitely-held button. Instead we should zero out the
inputs to make it look like things are all released. We do the same thing
for gyroscope inputs to make sure it doesn't look like it's endlessly
rotating, but we freeze the accelerometer input since zero isn't a neutral
input on the surface of the Earth.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This cleans up several issues with locking behavior, including RCU accesses
not being guarded behind a lock.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When an input device is closed, we set a feature report to reset lizard
mode and IMU mode. However, if the input device is closed because it was
removed, then we will necessarily error out when sending this, resulting in
logged errors. Since an error here is expected, we should just fail
silently.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
It always said Controller, even on Deck. Since we special-case other
instances of Controller vs. Deck in strings, let's be consistent here too.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This brings support for the 2026 Steam Controller, comparably featureful to
the existing support for the Steam Deck.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This refactors and simplifies the registration/unregistration flow. Since
we now only perform registration when the client isn't opened anymore, the
logic for handling that can be removed, and the rest of the function
streamlined.
We also remove the previous assumption that we have a serial number to show
we're registered, replacing it with a single purpose boolean.
In a previous refactor the code for unregistering a battery if later
registration steps failed was accidentally left out. As a result, a
lingering power_supply object could get left over after the steam object
was torn down. This is also fixed here.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add Logitech Bolt receiver support to the Logitech HID receiver and
HID++ drivers.
Handle Bolt receiver notifications in hid-logitech-dj and add a
Bolt-specific initialization path in hid-logitech-hidpp, separate from
the existing Unifying receiver path.
This allows Bolt-connected HID++ devices to expose battery information
through the kernel power_supply path, so userspace tools can report
their battery status with the correct device model.
Also, treat HIDPP_ERROR_CONNECT_FAIL like other disconnected-device
errors when retrieving protocol version to avoid protocol error messages
when a Bolt device powers off.
Tested with:
- Logitech MX Keys for Business via Bolt receiver
Signed-off-by: Erik Håkansson <erikhakan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
sensor_hub_get_feature() clamps its return value to the caller's buffer
size, but the copy loop still copies field->report_size / 8 bytes for
each report value. A malicious HID descriptor can advertise a large
feature field size while an IIO caller supplies a small stack buffer,
such as a single s32, causing an out-of-bounds write.
HID core stores parsed report values in __s32 slots and clamps extracted
values to 32 bits. Reject feature fields that require more than one slot
per value, guard the total byte count calculation, and clamp each
per-value copy to the remaining caller buffer.
Fixes: 5459ada2b3 ("HID: sensor-hub: Fix packing of result buffer for feature report")
Cc: stable@kernel.org
Assisted-by: OpenAI:GPT-5.5-Cyber
Signed-off-by: Xingrui Li <baka9@bakabaka9.tech>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: f06bf8d94f ("HID: Add hid-universal-pidff driver and supported device ids")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Refactor hid_haptic_init() to take a direct pointer to input_dev and
integrate its invocation into hid_haptic_input_configured().
Update hid-multitouch to rely on the refactored callback to perform the
force-feedback initialization during the registration loop. This ensures
that force-feedback capabilities are set up before the input device is
registered and exposed to userspace, closing the registration race.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_connect(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start(). This is racy as the input device is
already registered and visible to userspace at that point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Generic force-feedback initialization (pidff) currently happens in
hid_connect() after hidinput_connect() has already registered the input
devices. This is racy as the device is live and visible to userspace
before FF support is fully set up.
Move the call to hdev->ff_init() into hidinput_connect(), ensuring it
runs before input_register_device() is called. This closes the race
window for standard PID-capable devices.
The initialization now also checks (connect_mask & HID_CONNECT_FF) and
!hid_has_ff_input() to avoid conflicts with custom FF implementations
and respect driver opt-outs.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Override input device open() and close() callbacks to enable and disable
the force-feedback workqueue item synchronously.
When the input device is opened by userspace, call hid_hw_open() and
enable_work(). When it is closed, disable_work_sync() ensures that any
pending or running work item is cancelled/flushed and no further work
items can be scheduled.
In close(), zero out magnitudes and issue a final report to turn off the
rumble motors on the physical controller before shutting down transport
I/O.
Pack strong and weak magnitudes into a single u32 integer using
WRITE_ONCE() and READ_ONCE() for atomic, lockless updates.
This allows eliminating the manual 'removed' boolean flag and spinlock
completely.
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
