Commit graph

547,770 commits

Author SHA1 Message Date
Chris Wilson
5e4f518959 drm/i915: Prevent TLB error on first execution on SNB
Long ago I found that I was getting sporadic errors when booting SNB,
with the symptom being that the first batch died with IPEHR != *ACTHD,
typically caused by the TLB being invalid. These magically disappeared
if I held the forcewake during the entire ring initialisation sequence.
(It can probably be shortened to a short critical section, but the whole
initialisation is full of register writes and so we would be taking and
releasing forcewake almost continually, and so holding it over the
entire sequence will probably be a net win!)

Note some of the kernels I encounted the issue already had the deferred
forcewake release, so it is still relevant.

I know that there have been a few other reports with similar failure
conditions on SNB, I think such as
References: https://bugs.freedesktop.org/show_bug.cgi?id=80913

v2: Wrap i915_gem_init_hw() with its own security blanket as we take
that path following resume and reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 15:30:23 +02:00
Sudip Mukherjee
e936351a61 staging: sm750fb: wrong type for print
mention correct format specifier while printing.
fixes all the build warnings about incorrect argument type while
printing.
since this is a framebuffer device and it should follow what the
framebuffer layer is suggesting in struct fb_fix_screeninfo at
smem_start and mmio_start, so accordingly changed the datatypes of
vidmem_start, vidreg_start, vidmem_size and vidreg_size.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-10 13:56:23 +01:00
Denys Vlasenko
263042e463 x86/asm/entry/64: Save user RSP in pt_regs->sp on SYSCALL64 fastpath
Prepare for the removal of 'usersp', by simplifying PER_CPU(old_rsp) usage:

  - use it only as temp storage

  - store the userspace stack pointer immediately in pt_regs->sp
    on syscall entry, instead of using it later, on syscall exit.

  - change C code to use pt_regs->sp only, instead of PER_CPU(old_rsp)
    and task->thread.usersp.

FIXUP/RESTORE_TOP_OF_STACK are simplified as well.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425926364-9526-4-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-10 13:56:10 +01:00
Denys Vlasenko
616ab249f1 x86/asm/entry/64: Remove stub_iopl
stub_iopl is no longer needed: pt_regs->flags needs no fixing up
after previous change. Remove it.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425984307-2143-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-10 13:56:10 +01:00
Denys Vlasenko
29722cd4ef x86/asm/entry/64: Save R11 into pt_regs->flags on SYSCALL64 fastpath
Before this patch, R11 was saved in pt_regs->r11.

Which looks natural, but requires messy shuffling to/from iret
frame whenever ptrace or e.g. sys_iopl() wants to modify flags -
because that's how this register is used by SYSCALL/SYSRET.

This patch saves R11 in pt_regs->flags, and uses that value for
the SYSRET64 instruction. Shuffling is eliminated.

FIXUP/RESTORE_TOP_OF_STACK are simplified.

stub_iopl is no longer needed: pt_regs->flags needs no fixing up.

Testing shows that syscall fast path is ~54.3 ns before
and after the patch (on 2.7 GHz Sandy Bridge CPU).

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425926364-9526-2-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-10 13:56:10 +01:00
Dan Carpenter
b3924dd7a9 fbdev: pm3fb: cleanup some confusing indenting
This if statement should be pushed out one tab to line up with the rest.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-03-10 14:47:09 +02:00
Nicholas Mc Guire
7dea97e037 hyperv: hyperv_fb: match wait_for_completion_timeout return type
The return type of wait_for_completion_timeout is unsigned long not
int. This patch fixes up the declarations only.

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-03-10 14:37:46 +02:00
Nicholas Mc Guire
17713ce09d video: fbdev: use msecs_to_jiffies for time conversions
This is only an API consolidation and should make things more readable by
replacing  var * HZ / 1000  by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-03-10 14:32:13 +02:00
Axel Lin
739ae3452d phy: berlin-usb: Set drvdata for phy and use it
At the context where we have pointer to struct phy, it's useful to call
phy_get_drvdata() to get the address of priv. With this change, we can
remove the to_phy_berlin_usb_priv() macro and remove *phy from struct
phy_berlin_usb_priv.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 17:18:09 +05:30
Yannick Guerrini
ce99198131 ALSA: firewire: Fix trivial typos in comments
Change 'propper' to 'proper'
Change 'paramters' to 'parameters'
Change 'SYT_INTEVAL' to 'SYT_INTERVAL'
Change 'aligh'/'alighed' to 'align'/'aligned'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 12:40:30 +01:00
Stephen Rothwell
7e476c7dd8 regulator: fixes for regulator_set_optimum_mode name change
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10 10:39:32 +00:00
Mark Brown
eb5bc2a213 Linux 4.0-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
 mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
 kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
 fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
 V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
 qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
 =Xkue
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc3' into asoc-rt5670

Linux 4.0-rc3

Conflicts:
	sound/soc/codecs/rt5670.c
2015-03-10 10:37:02 +00:00
Florian Fainelli
1b4bd60876 ARM: 8309/1: l2c: enforce use of cache-level property
Make sure that we can read the "cache-level" property from the L2 cache
controller node, and ensure its value is 2.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-10 10:24:56 +00:00
Hongzhou Yang
359f9365d3 arm64: dts: mt8173: Add pinctrl/GPIO/EINT node for mt8173.
Add pinctrl, GPIO and EINT node to mt8173.dtsi.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-03-10 11:20:30 +01:00
Mika Kuoppala
0cd0caad99 drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
commit 05a2fb157e ("drm/i915: Consolidate forcewake code")
failed to take into account that we have used to reset both
the gen6 style and the multithreaded style forcewake registers.
This is due to fact that ivb can use either, depending on how the
bios has set up the machine.

Mimic the old semantics before we have determined the correct variety
and reset both before the ecobus probe.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 11:56:57 +02:00
Chris Wilson
762e45836a drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
This fixes a regression from

commit 5ed0bdf21a
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Wed Jul 16 21:05:06 2014 +0000

    drm: i915: Use nsec based interfaces

that made a negative timeout return immediately rather than the
previously defined behaviour of waiting indefinitely.

Testcase: igt/gem_wait
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89494
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: fixed a checkpatch complaint about whitespace.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 11:55:03 +02:00
Aaro Koskinen
efdb6f6edb crypto: octeon - enable OCTEON SHA1/256/512 module selection
Enable user to select OCTEON SHA1/256/512 modules.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:49:34 +11:00
Aaro Koskinen
fbaa4dfd51 crypto: octeon - add SHA512 module
Add OCTEON SHA512 module.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:48:58 +11:00
Aaro Koskinen
c3d0def620 crypto: octeon - add SHA256 module
Add OCTEON SHA256 module.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:48:58 +11:00
Aaro Koskinen
82be2dcfa6 crypto: octeon - add SHA1 module
Add OCTEON SHA1 module.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:48:58 +11:00
Aaro Koskinen
da3cd5d7a7 crypto: octeon - add instruction definitions for SHA1/256/512
Add instruction definitions for SHA1/256/512.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:48:57 +11:00
Aaro Koskinen
c3bc38d9fb crypto: octeon - always disable preemption when using crypto engine
Always disable preemption on behalf of the drivers when crypto engine
is taken into use. This will simplify the usage.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:48:57 +11:00
Aaro Koskinen
9b2de7ff42 crypto: octeon - don't disable bottom half in octeon-md5
Don't disable bottom half while the crypto engine is in use, as it
should be unnecessary: All kernel crypto engine usage is wrapped with
crypto engine state save/restore, so if we get interrupted by softirq
that uses crypto they should save and restore our context.

This actually fixes an issue when running OCTEON MD5 with interrupts
disabled (tcrypt mode=302). There's a WARNING because the module is
trying to enable the bottom half with irqs disabled:

[   52.656610] ------------[ cut here ]------------
[   52.661439] WARNING: CPU: 1 PID: 428 at /home/aaro/git/linux/kernel/softirq.c:150 __local_bh_enable_ip+0x9c/0xd8()
[   52.671780] Modules linked in: tcrypt(+)
[...]
[   52.763539] [<ffffffff8114082c>] warn_slowpath_common+0x94/0xd8
[   52.769465] [<ffffffff81144614>] __local_bh_enable_ip+0x9c/0xd8
[   52.775390] [<ffffffff81119574>] octeon_md5_final+0x12c/0x1e8
[   52.781144] [<ffffffff81337050>] shash_compat_digest+0xd0/0x1b0

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:48:56 +11:00
Jiri Kosina
0e4f93e501 goldfish: goldfish_tty_probe() is not using 'i' any more
The only place where 'i' has been used was a dead code that
got removed by 2a2483685a ("goldfish: remove unreachable line
of code"). Remove the last reference to the variable as well.

Fixes: 2a2483685a ("goldfish: remove unreachable line of code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-10 10:45:30 +01:00
Dave Gordon
6c51d46f13 drm/i915: use in_interrupt() not in_irq() to check context
The kernel in_irq() function tests for hard-IRQ context only, so if a
system is run with the kernel 'threadirqs' option selected, the test in
intel_check_page_flip() generates lots of warnings, because then it gets
called in soft-IRQ context.

We can instead use in_interrupt() which allows for either type of
interrupt, while still detecting and complaining about misuse of the
page flip code if it is ever called from non-interrupt context.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89321
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 11:16:54 +02:00
Laurent Pinchart
7eb5f302bb drm: Check in setcrtc if the primary plane supports the fb pixel format
Drivers implementing the universal planes API report the list of
supported pixel formats for the primary plane. Make sure the fb passed
to the setcrtc ioctl is compatible.

Drivers not implementing the universal planes API will have no format
reported for the primary plane, skip the check in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:36 +01:00
Chris Wilson
c484f02d0f drm: Lighten sysfs connector 'status'
Since the beginning, sysfs/connector/status has done a heavyweight
detection of the current connector status. But no user, such as upowerd
or logind, has ever desired to initiate a probe. Move the probing into a
new attribute so that existing readers get the behaviour they desire.

v2: David Herrmann suggested using "echo detect > /sys/.../status" to
trigger the probing, which is a fine idea. This extends that to also
allow the user to apply the force detection overrides at runtime.

v3: Now with airlied's email address fixed! Requires sysfs_streq()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:36 +01:00
Daniel Vetter
3461b30b3e drm/plane-helper: unexport drm_primary_helper_create_plane
We shouldn't tempt driver writers into using this since it uses a
default format list which is likely wrong. And when that's done we can
simplify the code a bit, too.

Noticed while reviewing a patch from Laurent.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-10 09:59:35 +01:00
Laurent Pinchart
ead8610d42 drm: Share plane pixel format check code between legacy and atomic
Both the legacy and atomic helpers need to check whether a plane
supports a given pixel format. The code is currently duplicated, share
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Slightly extend the docbook.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:35 +01:00
Yannick Guerrini
2a97acd637 drm: Fix trivial typos in comments
Change 'pixes' to 'pixels'
Change 'enabel' to 'enable'
Change 'enabeling' to 'enabling'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:34 +01:00
Jani Nikula
6b1e3f6154 drm/dp: add DPCD definitions from eDP 1.4
Add a number of DPCD definitions from eDP 1.4.

v2: s/DP_ALPM_LOCK_TIMEOUT_ERROR_STATUS/DP_ALPM_LOCK_TIMEOUT_ERROR/
   (Sonika)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:34 +01:00
Jani Nikula
9474675afa drm/dp: add DPCD definitions from DP 1.1 and 1.2a
Add a number of DPCD definitions from DP 1.1 and 1.2a.

v2: drop wrong DP version reference, rename DP training set macros
(Sonika).

Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:33 +01:00
Daniel Vetter
220dd2bc43 drm: Fixup racy refcounting in plane_force_disable
Originally it was impossible to be dropping the last refcount in this
function since there was always one around still from the idr. But in

commit 83f45fc360
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 6 09:10:18 2014 +0200

    drm: Don't grab an fb reference for the idr

we've switched to weak references, broke that assumption but forgot to
fix it up.

Since we still force-disable planes it's only possible to hit this
when racing multiple rmfb with fbdev restoring or similar evil things.
As long as userspace is nice it's impossible to hit the BUG_ON.

But the BUG_ON would most likely be hit from fbdev code, which usually
invovles the console_lock besides all modeset locks. So very likely
we'd never get the bug reports if this was hit in the wild, hence
better be safe than sorry and backport.

Spotted by Matt Roper while reviewing other patches.

Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-10 09:59:33 +01:00
Tvrtko Ursulin
aaed1aa540 drm/i915: Rotation property is now handled in DRM core
So no need to have code which never gets called in the driver.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:33 +01:00
Tvrtko Ursulin
4cda09ca59 drm: Complete moving rotation property to core
Commit 1da30627fc "drm: Add rotation value to
plane state" moved the rotation property to DRM core but only did the set
property part. This does the get property part as well.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:32 +01:00
Jani Nikula
0e71244c1b drm/dp: add DPCD definitions from eDP 1.2
Mostly display control related DPCD addresses.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:32 +01:00
Jani Nikula
bd5da992b9 drm/dp: indentation and ordering cleanups
Keep the DPCD macros ordered by address, and make indentation conform to
the rest of the file.

commit e045d20bef
Author: Sonika Jindal <sonika.jindal@intel.com>
Date:   Thu Feb 19 13:16:44 2015 +0530

    drm: Adding edp1.4 specific dpcd macros

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:31 +01:00
Daniel Vetter
2e3afd47ab drm/atomic-helper: Fix kerneldoc for prepare_planes
Copypaste-fail from cleanup_planes. Reported by Tvrtko.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-10 09:59:31 +01:00
Daniel Vetter
844285317c drm: Remove redundant code in the getencoder ioctl
When enabling atomic state object for this ioctl in

commit abd69c55dd
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Nov 25 23:50:05 2014 +0100

    drm: Handle atomic state properly in kms getfoo ioctl

I've forgotten to remove this hunk in one of the later revisions.
drm_encoder_get_crtc already does this.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-10 09:59:30 +01:00
Axel Lin
298fe56ee2 phy: ti-pipe3: Remove unneeded ifdef CONFIG_OF guard and of_match_ptr
if !CONFIG_OF, the probe fails.
This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are
not needed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:28 +05:30
Axel Lin
52a4a72a1a phy: omap-usb2: Remove unneeded ifdef CONFIG_OF guard and of_match_ptr
if !CONFIG_OF, the probe fails.
This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are
not needed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:27 +05:30
Axel Lin
1f9ba767d5 phy: omap-control: Remove unneeded ifdef CONFIG_OF guard and of_match_ptr
if !CONFIG_OF, the probe fails.
This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are
not needed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:27 +05:30
Axel Lin
320c3fcec6 phy: miphy28lp: Use PTR_ERR_OR_ZERO
PTR_ERR_OR_ZERO simplifies the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Gabriel Fernandez<gabriel.fernandez@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:27 +05:30
Axel Lin
f8f55393b2 phy: berlin-sata: Use devm_kcalloc at appropriate place
Prefer devm_kcalloc over devm_kzalloc with multiply.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:27 +05:30
Axel Lin
8fd0ea395f phy: xgene: Use PTR_ERR_OR_ZERO
Also remove unneeded goto and rc variable.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:27 +05:30
Axel Lin
82ffb676c8 phy: berlin-usb: Use PTR_ERR_OR_ZERO
PTR_ERR_OR_ZERO simplifies the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 14:12:27 +05:30
qipeng.zha
549e783f6a pinctrl: update direction_output function of cherryview driver
From the comments of gpiod_direction_output(), need to set @value
as initial output, so update the lowlevel routine to make it work.

Signed-off-by: jason.cj.chen<jason.cj.chen@intel.com>
Signed-off-by: qipeng.zha <qipeng.zha@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-10 09:02:23 +01:00
Oleg Nesterov
1d23c4518b x86/fpu: Factor out memset(xstate, 0) in fpu_finit() paths
fx_finit() has two users but only fpu_finit() needs to clear
xstate, alloc_bootmem_align() in setup_init_fpu_buf() returns
zero-filled memory.

And note that both memset()'s look confusing. Yes, offsetof() is
0 for ->fxsave or ->fsave, but it would be cleaner to turn
them into a single memset() which zeroes fpu->state.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1425967585-4725-2-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/20150302183257.GC23085@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-10 07:14:31 +01:00
Oleg Nesterov
e7f180dcd8 x86/fpu: Change xstateregs_get()/set() to use ->xsave.i387 rather than ->fxsave
This is a cosmetic change: xstateregs_get() and xstateregs_set()
abuse ->fxsave to access xsave->i387.sw_reserved.

This practice is correct, ->fxsave and xsave->i387 share the same memory,
but IMHO this looks confusing.

And we can make this code more readable if we add a
"struct xsave_struct *" local variable as well.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1425967585-4725-1-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/20150302183237.GB23085@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-10 07:14:31 +01:00
Wanpeng Li
44fb085bfa sched/deadline: Add rq->clock update skip for dl task yield
This patch adds rq->clock update skip for SCHED_DEADLINE task yield,
to tell update_rq_clock() that we've just updated the clock, so that
we don't do a microscopic update in schedule() and double the
fastpath cost.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1425961200-3809-1-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-10 05:46:50 +01:00