There is a window on small filesytsems where specualtive
preallocation can be larger than that ENOSPC throttling thresholds,
resulting in specualtive preallocation trying to reserve more space
than there is space available. This causes immediate ENOSPC to be
triggered, prealloc to be turned off and flushing to occur. One the
next write (i.e. next 4k page), we do exactly the same thing, and so
effective drive into synchronous 4k writes by triggering ENOSPC
flushing on every page while in the window between the prealloc size
and the ENOSPC prealloc throttle threshold.
Fix this by checking to see if the prealloc size would consume all
free space, and throttle it appropriately to avoid premature
ENOSPC...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When _xfs_buf_find is passed an out of range address, it will fail
to find a relevant struct xfs_perag and oops with a null
dereference. This can happen when trying to walk a filesystem with a
metadata inode that has a partially corrupted extent map (i.e. the
block number returned is corrupt, but is otherwise intact) and we
try to read from the corrupted block address.
In this case, just fail the lookup. If it is readahead being issued,
it will simply not be done, but if it is real read that fails we
will get an error being reported. Ideally this case should result
in an EFSCORRUPTED error being reported, but we cannot return an
error through xfs_buf_read() or xfs_buf_get() so this lookup failure
may result in ENOMEM or EIO errors being reported instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This patch adds a better power filter hook for powering down unused
widgets in the generic parser.
The feature is enabled by setting hda_gen_spec.power_down_unused
flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the moment the MSR driver only relies upon file system
checks. This means that anything as root with any capability set
can write to MSRs. Historically that wasn't very interesting but
on modern processors the MSRs are such that writing to them
provides several ways to execute arbitary code in kernel space.
Sample code and documentation on doing this is circulating and
MSR attacks are used on Windows 64bit rootkits already.
In the Linux case you still need to be able to open the device
file so the impact is fairly limited and reduces the security of
some capability and security model based systems down towards
that of a generic "root owns the box" setup.
Therefore they should require CAP_SYS_RAWIO to prevent an
elevation of capabilities. The impact of this is fairly minimal
on most setups because they don't have heavy use of
capabilities. Those using SELinux, SMACK or AppArmor rules might
want to consider if their rulesets on the MSR driver could be
tighter.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Horses <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I ran out of free entries when I had CONFIG_DMA_API_DEBUG
enabled. Some other archs seem to default to 65536, so increase
this limit for x86 too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/50A612AA.7040206@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
----
Put the power state synchronization at the end of the parsing of
codec. This is necessary when the power filter is changed during the
codec probe. Since the first power-up sequence is performed without
the special filter, all widgets are supposed to be ON at this point.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The logic that resets the device is wrong. It should be resetting
just the layer that got read. Also, stop is needed before updating
the counters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The logic that resets the device is wrong. It should be resetting
just the layer that got read. Also, stop is needed before updating
the counters.
While there, rename it, as we'll soon introduce a postBER logic
there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Take advantage of multiple MSIs implementation on x86 - on
systems with IRQ remapping AHCI ports not only get assigned
separate MSI vectors - but also separate IRQs. As result,
interrupts generated by different ports could be serviced on
different CPUs rather than on a single one.
In cases when number of allocated MSIs is less than requested
the Sharing Last MSI mode does not get used, no matter
implemented in hardware or not. Instead, the driver assumes the
advantage of multiple MSIs is negated and falls back to the
single MSI mode as if MRSM bit was set (some Intel chips
implement this strategy anyway - MRSM bit gets set even if the
number of allocated MSIs exceeds the number of implemented ports).
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/15bf7ee314dd55f21ec7d2a01c47613cd8190a7c.1353324359.git.agordeev@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new function pci_enable_msi_block_auto() tries to allocate
maximum possible number of MSIs up to the number the device
supports. It generalizes a pattern when pci_enable_msi_block()
is contiguously called until it succeeds or fails.
Opposite to pci_enable_msi_block() which takes the number of
MSIs to allocate as a input parameter,
pci_enable_msi_block_auto() could be used by device drivers to
obtain the number of assigned MSIs and the number of MSIs the
device supports.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c3de2419df94a0f95ca1a6f755afc421486455e6.1353324359.git.agordeev@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MSI specification has several constraints in comparison with
MSI-X, most notable of them is the inability to configure MSIs
independently. As a result, it is impossible to dispatch
interrupts from different queues to different CPUs. This is
largely devalues the support of multiple MSIs in SMP systems.
Also, a necessity to allocate a contiguous block of vector
numbers for devices capable of multiple MSIs might cause a
considerable pressure on x86 interrupt vector allocator and
could lead to fragmentation of the interrupt vectors space.
This patch overcomes both drawbacks in presense of IRQ remapping
and lets devices take advantage of multiple queues and per-IRQ
affinity assignments.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c8bd86ff56b5fc118257436768aaa04489ac0a4c.1353324359.git.agordeev@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add both per-layer and global block error count and block count,
for PER and UCB measurements.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add a hook to struct hda_codec for filtering the target power state of
each widget when powering up/down. The current hackish EAPD check is
implemented as the default hook pointer, too.
This allows codec drivers to implement own power filter. In the
upcoming changes, the generic parser will have the better power filter
based on the active paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AC_VERB_GET_POWER_STATE returns the combined bits of the actual state
and the target state. Thus, comparing the obtained value directly
with the target value can't work. The value has to be shifted and
masked properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reschedule rq->curr if the first RT task has just been
pulled to the rq.
Signed-off-by: Kirill V Tkhai <tkhai@yandex.ru>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tkhai Kirill <tkhai@yandex.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/118761353614535@web28f.yandex.ru
Signed-off-by: Ingo Molnar <mingo@kernel.org>
From Pawel Moll:
- makes the V2P-CA15_A7 (a.k.a. TC2) work with 3.8 kernels
- improves vexpress-sysreg.c behaviour on arm64 platforms
* 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux:
mfd: vexpress-sysreg: Don't skip initialization on probe
ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree
ARM: vexpress: extend the MPIDR range used for pen release check
The u9540 stopped booting after the v3.7 merge window due to
a lack of common clk support and early PRCMU initialisation.
In this patch we rectify these issues, placing the u9540
development board back into a successfully booting state.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Because the register does not exist in gen5+.
This patch solves "unclaimed register" messages on Haswell after
suspend/resume.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One RM9200 setup option is the only C code change.
Some documentation changes can clarify the pinctrl use.
Then, some defconfig modifications are allowing the affected platforms
to boot.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRAPnqAAoJEAf03oE53VmQbeUH/04lzIgUv63RX2zQFD6Fi1zD
IeYBhfzeSP65CPMqyFnw+lrHUdCWn0JYdFM6/x7J8n1k2+SY3T7N95k5oXlnqO6e
pT/XGontWQIZkyL0jkrawbs5QtE0OYnkm8Ge97qlhul4XoIiyWLFFGDHE36dzcv/
K4FPrG9PVVhjFIiZB+v5I3CnhzLWJvozn9J2ceIZ5d0Z9dwLuHWgXGu6OM2ZRvOw
LR1r2YpnGTKUT0am6tmWm1W7PY6ZQOQXmx5qX/H2X6gRQdq690baYUTOYPK3ZckX
kdEa+pCOQHY1GgimFzUzAVfoCyYwllo1yAWaK2a4qR4kxcaeGd1BYqlKeCFIfRc=
=aKwA
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
From Nicolas Ferre:
Here are fixes for AT91 that are mainly related to device tree.
One RM9200 setup option is the only C code change.
Some documentation changes can clarify the pinctrl use.
Then, some defconfig modifications are allowing the affected platforms
to boot.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii
ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig
ARM: at91/at91_dt_defconfig: remove memory specification to cmdline
ARM: at91/dts: add macb mii pinctrl config for kizbox
ARM: at91: rm9200: remake the BGA as default version
ARM: at91: fix gpios on i2c-gpio for RM9200 DT
ARM: at91/at91sam9x5 DTS: add SCK USART pins
ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts
ARM: at91/at91-pinctrl documentation: fix typo and add some details
The arguments to call is_active_nid() in activate_amp() were swapped,
and this resulted in the muted amp on some SPDIF output pins.
Also, the index to be passed to is_active_nid() must be idx_to_check.
Otherwise it checks the wrong connection in the case of implicit aamix
connection paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
. perf build-id cache now can show DSOs present in a perf.data file that are
not in the cache, to integrate with build-id servers being put in place by
organizations such as Fedora.
. perf buildid-list -i an-elf-file-instead-of-a-perf.data is back showing its
build-id.
. No need to do feature checks when doing a 'make tags'
. Fix some 'perf test' errors and make them use the tracepoint evsel constructor.
. perf top now shares more of the evsel config/creation routines with 'record',
paving the way for further integration like 'top' snapshots, etc.
. perf top now supports DWARF callchains.
. perf evlist decodes sample_type and read_format, helping diagnose problems.
. Fix mmap limitations on 32-bit, fix from David Miller.
. perf diff fixes from Jiri Olsa.
. Ignore ABS symbols when loading data maps, fix from Namhyung Kim
. Hists improvements from Namhyung Kim
. Don't check configuration on make clean, from Namhyung Kim
. Fix dso__fprintf() print statement, from Stephane Eranian.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=r7FE
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. perf build-id cache now can show DSOs present in a perf.data file that are
not in the cache, to integrate with build-id servers being put in place by
organizations such as Fedora.
. perf buildid-list -i an-elf-file-instead-of-a-perf.data is back showing its
build-id.
. No need to do feature checks when doing a 'make tags'
. Fix some 'perf test' errors and make them use the tracepoint evsel constructor.
. perf top now shares more of the evsel config/creation routines with 'record',
paving the way for further integration like 'top' snapshots, etc.
. perf top now supports DWARF callchains.
. perf evlist decodes sample_type and read_format, helping diagnose problems.
. Fix mmap limitations on 32-bit, fix from David Miller.
. perf diff fixes from Jiri Olsa.
. Ignore ABS symbols when loading data maps, fix from Namhyung Kim
. Hists improvements from Namhyung Kim
. Don't check configuration on make clean, from Namhyung Kim
. Fix dso__fprintf() print statement, from Stephane Eranian.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__fuse_direct_io() allocates fuse-requests by calling fuse_get_req(fc, n). The
patch calculates 'n' based on iov[] array. This is useful because allocating
FUSE_MAX_PAGES_PER_REQ page pointers and descriptors for each fuse request
would be waste of memory in case of iov-s of smaller size.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Let fuse_get_user_pages() pack as many iov-s to a single fuse_req as
possible. This is very beneficial in case of iov[] consisting of many
iov-s of relatively small sizes (e.g. PAGE_SIZE).
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The patch makes preliminary work for the next patch optimizing scatter-gather
direct IO. The idea is to allow fuse_get_user_pages() to pack as many iov-s
to each fuse request as possible. So, here we only rework all related
call-paths to carry iov[] from fuse_direct_IO() to fuse_get_user_pages().
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The function does not modify iov_iter which 'i' points to.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Previously, anyone who set flag 'argpages' only filled req->pages[] and set
per-request page_offset. This patch re-works all cases where argpages=1 to
fill req->page_descs[] properly.
Having req->page_descs[] filled properly allows to re-work fuse_copy_pages()
to copy page fragments described by req->page_descs[]. This will be useful
for next patches optimizing direct_IO.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The ability to save page pointers along with lengths and offsets in fuse_req
will be useful to cover several iovec-s with a single fuse_req.
Per-request page_offset is removed because anybody who need it can use
req->page_descs[0].offset instead.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
fuse_do_ioctl() already calculates the number of pages it's going to use. It is
stored in 'num_pages' variable. So the patch simply uses it for allocating
fuse_req.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The patch allocates as many page pointers in fuse_req as needed to cover
interval [pos .. pos+len-1]. Inline helper fuse_wr_pages() is introduced
to hide this cumbersome arithmetic.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The patch uses 'nr_pages' argument of fuse_readpages() as heuristics for the
number of page pointers to allocate.
This can be improved further by taking in consideration fc->max_read and gaps
between page indices, but it's not clear whether it's worthy or not.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The patch reworks fuse_retrieve() to allocate only so many page pointers
as needed. The core part of the patch is the following calculation:
num_pages = (num + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
(thanks Miklos for formula). All other changes are mostly shuffling lines.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The patch categorizes all fuse_get_req() invocations into two categories:
- fuse_get_req_nopages(fc) - when caller doesn't care about req->pages
- fuse_get_req(fc, n) - when caller need n page pointers (n > 0)
Adding fuse_get_req_nopages() helps to avoid numerous fuse_get_req(fc, 0)
scattered over code. Now it's clear from the first glance when a caller need
fuse_req with page pointers.
The patch doesn't make any logic changes. In multi-page case, it silly
allocates array of FUSE_MAX_PAGES_PER_REQ page pointers. This will be amended
by future patches.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The patch removes inline array of FUSE_MAX_PAGES_PER_REQ page pointers from
fuse_req. Instead of that, req->pages may now point either to small inline
array or to an array allocated dynamically.
This essentially means that all callers of fuse_request_alloc[_nofs] should
pass the number of pages needed explicitly.
The patch doesn't make any logic changes.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
This patch implements readdirplus support in FUSE, similar to NFS.
The payload returned in the readdirplus call contains
'fuse_entry_out' structure thereby providing all the necessary inputs
for 'faking' a lookup() operation on the spot.
If the dentry and inode already existed (for e.g. in a re-run of ls -l)
then just the inode attributes timeout and dentry timeout are refreshed.
With a simple client->network->server implementation of a FUSE based
filesystem, the following performance observations were made:
Test: Performing a filesystem crawl over 20,000 files with
sh# time ls -lR /mnt
Without readdirplus:
Run 1: 18.1s
Run 2: 16.0s
Run 3: 16.2s
With readdirplus:
Run 1: 4.1s
Run 2: 3.8s
Run 3: 3.8s
The performance improvement is significant as it avoided 20,000 upcalls
calls (lookup). Cache consistency is no worse than what already is.
Signed-off-by: Anand V. Avati <avati@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Running the perf utility on a Ivybridge EP server we encounter
"not supported" events:
<not supported> L1-dcache-loads
<not supported> L1-dcache-load-misses
<not supported> L1-dcache-stores
<not supported> L1-dcache-store-misses
<not supported> L1-dcache-prefetches
<not supported> L1-dcache-prefetch-misses
This patch adds support for this processor.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Youquan Song <youquan.song@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355851223-27705-1-git-send-email-youquan.song@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The address range of sync_global_pgds() should be [start, end],
but we pass [start, end) to this function.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Converting macros to functions unhide type problems before
changes will be integrated and trigger problems on other
architectures.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no need to have two checks for "associated"
in ieee80211_sta_restart(), make the first one locked
to not race (unlikely at this point during resume)
and remove the second check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit "cfg80211: check radar interface combinations" a regression
was introduced which might lead to NULL dereference if the argument
chan = NULL, which might happen in IBSS/wext case (and probably
others).
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An existing mesh station entry may change its rate
capabilities, so call rate_control_rate_update() to notify
the rate control.
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
[fix compilation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
