Commit graph

361,091 commits

Author SHA1 Message Date
Shiraz Hashim
e0b9c2109b CLK: SPEAr13xx: Fix mux clock names
This patch updates mux clock names of multiple clocks. It updates _clk with
_mclk to make it more readable.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-21 11:45:30 -08:00
Rajeev Kumar
df2449aba4 CLK: SPEAr: Fix dev_id & con_id for multiple clocks
dev_id & con_id names of multiple clocks are incorrect. This patch fixes these
names with the names that come via DT.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Bhavna Yadav <bhavna.yadav@st.com>
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-21 11:45:19 -08:00
John W. Linville
75c8ec71fb Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2012-11-21 14:43:51 -05:00
Hans Verkuil
6b0d5d344a [media] adv7604: Replace prim_mode by mode
Changes the way the primary mode is handled:
- Remove it from platform_data since it doesn't belong there.
- Add a new mode enum for use with s_routing.
- Collapse the two HDMI modes into one HDMI mode: when setting up the
  timings manually we do not need to select HDMI_COMP mode. That's only
  needed when selecting a preset.
This patch prepares for the next step where we switch to using the presets
where available.

Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:43:49 -02:00
Hans Verkuil
809396474f [media] adv7604: cleanup references
Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:42:57 -02:00
John W. Linville
1e60896fe0 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c
2012-11-21 14:38:49 -05:00
Thomas Gleixner
9c3f9e2816 Merge branch 'fortglx/3.8/time' of git://git.linaro.org/people/jstultz/linux into timers/core
Fix trivial conflicts in: kernel/time/tick-sched.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-11-21 20:31:52 +01:00
Olof Johansson
24025f6f58 Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:

Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12
SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA
PHY.

As I commented on [4/7], this branch merged pinctrl/samsung to support
pinctrl for exynos4x12 without useless merge conflicts.

* 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits)
  ARM: EXYNOS: DT Support for SATA and SATA PHY
  ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
  ARM: dts: Add node for touchscreen for exynos4210-trats
  ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats
  ARM: dts: Add node for i2c3 bus for exynos4210-trats
  ARM: dts: Add nodes for GPIO keys available on Trats
  ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats
  ARM: dts: Add nodes for pin controllers for exynos4x12
  pinctrl: samsung: Add support for EXYNOS4X12
  gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12
  ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12
  ARM: dts: add board dts file for EXYNOS4412 based SMDK board
  ARM: dts: Add support for EXYNOS4X12 SoCs
  ARM: EXYNOS: Add devicetree node for TMU driver for exynos5
  ARM: EXYNOS: Add devicetree node for TMU driver for exynos4
  ARM: EXYNOS: Add MFC device tree support
  ARM: dts: Enable serial controllers on Origen and SMDKV310
  Documentation: Update samsung-pinctrl device tree bindings documentation
  pinctrl: samsung: Add GPIO to IRQ translation
  pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT
  ...

Add/add conflicts in:
	arch/arm/boot/dts/exynos5250-smdk5250.dts
	arch/arm/boot/dts/exynos5250.dtsi
	arch/arm/mach-exynos/mach-exynos5-dt.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 11:30:32 -08:00
Seth Forshee
ad66786718 brcmsmac: Remove stray argument from debug macro
One of the debug macro invocations ended up with a stray 0 argument
where the format string should be. Remove it.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:05 -05:00
Seth Forshee
6940c9bed1 brcmsmac: Remove unused wlc_prio2prec_map and _BRCMS_PREC_* constants
Fixes sparse warning:
drivers/net/wireless/brcm80211/brcmsmac/main.c:308:10: sparse: symbol 'wlc_prio2prec_map' was not declared. Should it be static?

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:04 -05:00
Sujith Manoharan
580bdac386 ath9k: Remove 'stations' debugfs file
The 'stations' debugfs file has multiple issues. It doesn't scale
to an arbitrary number of associated stations and allocating
64K is not elegant either. Now that changes have been made in
mac80211 to support dynamic creation/deletion of driver-specific
debugfs files on station addition/removal, remove this file and
make use of the mac80211 hooks (which will be done in a sebsequent
patch).

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:04 -05:00
Sujith Manoharan
4d28f771ff ath9k: Fix rate control debugging
Update the rate statistics only when debugfs has been enabled
in ath9k and mac80211 and move the stat() functions under proper
conditionals.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:04 -05:00
Sujith Manoharan
1c11e10b6a ath9k: Fill remove_sta_debugfs() callback
Remove the rate control statistics debugfs file properly
via remove_sta_debugfs(). Also, check for both MAC80211_DEBUGFS
and ATH9K_DEBUGFS config options.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:04 -05:00
Sujith Manoharan
c0b74876ee ath9k: Add a debugfs file to dump queue statistics
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:03 -05:00
Sujith Manoharan
78ef731ce5 ath9k: Fix the 'xmit' debugfs file
The 'xmit' debugfs file has become big and unwieldy, fix
multiple issues with its usage:

* Store TX counters/statistics only for the 4 Access Categories.
  Use IEEE80211_NUM_ACS instead of ATH9K_NUM_TX_QUEUES.

* Move various utility macros to debug.h, they can be reused
  elsewhere.

* Remove tx_complete_poll_work_seen.

* Remove code that accesses various internal queue-specific
  variables without any locking whatsoever. HW/SW queue details
  will be handled in a subsequent patch.

* Do not print internal values like txq_headidx and txq_headidx.
  They were mostly unused anyway, considering code like:
  PRX("txq_tailidx:     ", txq_headidx);

* Handle 'txprocdesc' for EDMA too.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:03 -05:00
Sujith Manoharan
bea843c738 ath9k/ath9k_htc: Remove WME macros
Use the macros provided by mac80211 and remove redundant
declarations inside the drivers.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:02 -05:00
Stanislav Yakovlev
067293876e net/wireless: ipw2200: introduce ipw_set_geo function
Move regulatory domain initialization code to a separate function.

Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:02 -05:00
Rajkumar Manoharan
2884561a64 ath9k: stomp audio profiles on weak signal strength
On lower WLAN signal strength, WLAN downlink traffic might suffer
from retransmissions. At the mean time, playing SCO/A2DP profiles
is affecting WLAN stability. In such scenario, by stomping SCO/A2DP
BT traffic completely for a BTCOEX period, gives WLAN traffic an
oppertunity to recover PHY rate. It also improves WLAN stability at
lower RSSI without sacificing BT traffic.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:01 -05:00
Rajkumar Manoharan
b88083bfb3 ath9k: Fix MCI reset in BT cal_req
This patch reverts the commit "ath9k_hw: Wait BT calibration to complete"
and bail out from MCI interrupt routine for chip reset. The above commit
stalls the WLAN TCP traffic while bringing up and down the BT interface
iteratively. Fixing this properly by queueing up chip reset and bailing
out properly from tasklet routine.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:01 -05:00
Rajkumar Manoharan
ca90ef443c ath9k: Process FATAL interrupts at first
FATAL and WATCHDOG interrupts should be processed first followed
by others.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21 14:16:01 -05:00
Sean Young
37b0b4e90d [media] winbond-cir: add carrier detection
The winbond hardware has a counter for leading edges, which increases as
they are received. As we read raw IR from a fifo in an interrupt handler,
we cannot correlate them to specific IR pulses so we simply count all
pulses and edges until we go idle and disable the receiver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:06:17 -02:00
Sean Young
c496e716e0 [media] winbond-cir: increase IR receiver resolution
This is needed for carrier reporting.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:05:18 -02:00
Sean Young
e5eda7faea [media] winbond-cir: fix idle mode
The receiver is never disabled by idle mode since rxstate never gets set
to RXSTATE_ACTIVE, so we keep on getting interrupts after the first IR
activity ends. Note that ir_raw_event_reset() already calls
ir_raw_event_handle().

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:03:30 -02:00
Linus Walleij
70ee657714 clk: move IM-PD1 clocks to drivers/clk
The ARM IM-PD1 add-on module has a few clock of its own, let's
move also these down to the drivers/clk/versatile driver dir
and get rid of any remaining oldschool Integrator clocks.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-21 11:02:44 -08:00
Linus Walleij
7a9ad671ac clk: make ICST driver handle the VCO registers
It turns out that all platforms using the ICST VCO are really
just touching two registers, and in the same way as well: one
register with the VCO configuration as such, and one lock register
that makes it possible to write to the VCO.

Factor this register read/write into the ICST driver so we can
reuse it in the IM-PD1 driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-21 11:02:20 -08:00
Linus Walleij
401301ccdf clk: add GPLv2 headers to the Versatile clock files
The GPLv2 headers were missing and the subsystem maintainer likes
them so put them in. I am the copyright holder, so explicitly
licensing these under the GPLv2.

Reported-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-21 11:02:00 -08:00
Olof Johansson
e9f6d13513 Merge branch 'sunxi/soc2' into next/soc
From Maxime Ripard:

Here is a pull request to add the support for Allwinner A10 SoCs.

* sunxi/soc2:
  ARM: sunxi: Add sunxi restart function via onchip watchdog
  ARM: sunxi: Add sun4i and cubieboard support
  ARM: sunxi: Add earlyprintk support for UART0 (sun4i)
  ARM: sunxi: Restructure sunxi dts/dtsi files

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 10:52:44 -08:00
Jason Gunthorpe
1dc831bf53 ARM: Kirkwood: Update PCI-E fixup
- The code relies on rc_pci_fixup being called, which only happens
  when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting
  this causes a booting failure with a non-obvious cause.
- Update rc_pci_fixup to set the class properly, copying the
  more modern style from other places
- Correct the rc_pci_fixup comment

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 18:30:08 +00:00
Russell King - ARM Linux
d356cf5a74 Dove: Fix irq_to_pmu()
PMU interrupts start at IRQ_DOVE_PMU_START, not IRQ_DOVE_PMU_START + 1.
Fix the condition.  (It may have been less likely to occur had the code
been written "if (irq >= IRQ_DOVE_PMU_START" which imho is the easier
to understand notation, and matches the normal way of thinking about
these things.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 18:28:25 +00:00
Olof Johansson
01ba6dbf48 Merge branch 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards
From Kukjin Kim:

Here is Samsung boards update for v3.8 and most of them are updates
for S3C64XX Cragganmore board.

* 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Add missing device selects for Cragganmore
  ARM: EXYNOS: Add missing USB regulators for origen
  ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore
  ARM: S3C64XX: Add handset module to probed Glenfarclas modules
  ARM: S3C64XX: Add WM2200 module for Cragganmore
  ARM: S3C64XX: Add hookup for Deanston module on Cragganmore
  ARM: S3C64XX: Handle new Amrut modules on Cragganmore
  ARM: S3C64XX: Handle revision-specific differences in Cragganmore modules
  ARM: S3C64XX: Provide platform data for Tomatin/Balblair on Cragganmore
  ARM: S3C64XX: Update hookup for Arizona class devices
  ARM: S3C64XX: Add more Glenfarclas module ID strings

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 10:26:13 -08:00
Russell King - ARM Linux
5d3df93542 Dove: Attempt to fix PMU/RTC interrupts
Fix the acknowledgement of PMU interrupts on Dove: some Dove hardware
has not been sensibly designed so that interrupts can be handled in a
race free manner.  The PMU is one such instance.

The pending (aka 'cause') register is a bunch of RW bits, meaning that
these bits can be both cleared and set by software (confirmed on the
Armada-510 on the cubox.)

Hardware sets the appropriate bit when an interrupt is asserted, and
software is required to clear the bits which are to be processed.  If
we write ~(1 << bit), then we end up asserting every other interrupt
except the one we're processing.  So, we need to do a read-modify-write
cycle to clear the asserted bit.

However, any interrupts which occur in the middle of this cycle will
also be written back as zero, which will also clear the new interrupts.

The upshot of this is: there is _no_ way to safely clear down interrupts
in this register (and other similarly behaving interrupt pending
registers on this device.)  The patch below at least stops us creating
new interrupts.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21 18:25:11 +00:00
Olof Johansson
1f1ba83645 Merge branch 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc2
From Kukjin Kim:

This includes supporting legacy i2c controller and ARM down clock
support for exynos5 and small changes.

[olof: It contains a dependency on samsung/hdmi for HDMI DT bindings, for some reason.]

* 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Clock settings for SATA and SATA PHY
  ARM: EXYNOS: Add ARM down clock support
  ARM: EXYNOS: Fix i2c suspend/resume for legacy controller
  ARM: EXYNOS: Add aliases for i2c controller
  ARM: EXYNOS: Setup legacy i2c controller interrupts
  ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms
  ARM: EXYNOS: add clocks for exynos5 hdmi
  ARM: dts: add device tree support for exynos5 hdmiddc
  ARM: dts: add device tree support for exynos5 hdmiphy
  ARM: dts: add device tree support for exynos5 mixer
  ARM: dts: add device tree support for exynos5 hdmi
  ARM: EXYNOS: Add dp clock support for EXYNOS5
  ARM: SAMSUNG: call clk_get_rate for debugfs rate files
  ARM: SAMSUNG: add clock_tree debugfs file in clock

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 10:24:59 -08:00
Jonathan Cameron
be7fd3b86a iio:adc:ad7298 make the tx and rx buffers __be16
These buffers are a little interesting in that their
content may have variable endianness, but all but one
element will definitely be big endian.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2012-11-21 18:24:26 +00:00
Igor Grinberg
26f01998b0 ARM: OMAP3: cm-t3517: use GPTIMER for system clock
cm-t3517 starting from revision 1.2 does not have the 32K oscilator
wired to the AM3517 SoC.
Therefore switch to use the GPTIMER for system clock.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-21 10:20:43 -08:00
Olof Johansson
41739b60b3 Merge branch 'samsung/pinctrl' into next/soc
From Kukjin Kim:
Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12
SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA
PHY.

As I commented on [4/7], this branch merged pinctrl/samsung to support
pinctrl for exynos4x12 without useless merge conflicts.

* samsung/pinctrl:
  pinctrl: samsung: Update error check for unsigned variables
  pinctrl: samsung: Add support for EXYNOS4X12
  Documentation: Update samsung-pinctrl device tree bindings documentation
  pinctrl: samsung: Add GPIO to IRQ translation
  pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT
  pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts
  pinctrl: samsung: Use one GPIO chip per pin bank
  pinctrl: exynos: Use one IRQ domain per pin bank
  pinctrl: samsung: Include bank-specific eint offset in bank struct
  pinctrl: samsung: Hold pointer to driver data in bank struct
  pinctrl: samsung: Match pin banks with their device nodes
  ARM: dts: exynos4210-pinctrl: Add nodes for pin banks
  pinctrl: samsung: Distinguish between pin group and bank nodes
  pinctrl: samsung: Remove static pin enumerations
  pinctrl: samsung: Assing pin numbers dynamically
  pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank
  pinctrl: samsung: Detect and handle unsupported configuration types
2012-11-21 10:18:54 -08:00
Igor Grinberg
6f80b3bb8a ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
CONFIG_OMAP_32K_TIMER is kind of standing on the single zImage way.
Make OMAP2+ timer code independant from the CONFIG_OMAP_32K_TIMER
setting.
To remove the dependancy, several conversions/additions had to be done:
1) Timer initialization functions are named by the platform
   name and the clock source in use.
   This also makes it possible to define and use the GPTIMER as the
   clock source instead of the 32K timer on platforms that do not have
   the 32K timer ip block or the 32K timer is not wired on the board.
   Currently, the the timer is chosen in the machine_desc structure on
   per board basis. Later, DT should be used to choose the timer.
2) Settings under the CONFIG_OMAP_32K_TIMER option are used as defaults
   and those under !CONFIG_OMAP_32K_TIMER are removed.
   This removes the CONFIG_OMAP_32K_TIMER on OMAP2+ timer code.
3) Since we have all the timers defined inside machine_desc structure
   and we no longer need the fallback to gp_timer clock source in case
   32k_timer clock source is unavailable (namely on AM33xx), we no
   longer need the #ifdef around omap2_sync32k_clocksource_init()
   function. Remove the #ifdef CONFIG_OMAP_32K_TIMER around the
   omap2_sync32k_clocksource_init() function.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
2012-11-21 10:15:59 -08:00
Olof Johansson
4aa7cf79b1 Merge branch 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim:
This is for Samsung gpio stuff and got the ack from Linus Walleij.

* 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  gpio: samsung: use pr_* instead of printk
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
2012-11-21 10:13:53 -08:00
Olof Johansson
e642779b49 Merge branch 'next/hdmi-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
This is for adding support for DT based exynos5250 hdmi and it adds
device node for hdmi, mixer, hdmiphy and hdmiddc.

* 'next/hdmi-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms
  ARM: EXYNOS: add clocks for exynos5 hdmi
  ARM: dts: add device tree support for exynos5 hdmiddc
  ARM: dts: add device tree support for exynos5 hdmiphy
  ARM: dts: add device tree support for exynos5 mixer
  ARM: dts: add device tree support for exynos5 hdmi
2012-11-21 10:11:58 -08:00
Olof Johansson
007108a227 Merge branch 'next/cleanup-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
From Kukjin Kim:
* 'next/cleanup-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: S3C64XX: Statically define parent clock of "camera" clock
  ARM: S3C64XX: Remove duplicated camera clock
  ARM: EXYNOS: Add missing static storage class specifiers in clock-exynos5.c
  ARM: EXYNOS: Make combiner_of_init function static
  ARM: EXYNOS: Make s3c_device_i2c0 always use id 0
  ARM: EXYNOS: Remove wrongly placed usb2.0 PHY_CFG definition from PMU_REG
  ARM: EXYNOS: reorder inclusions of <linux/platform_data/xxx.h>
  ARM: EXYNOS: Remove unused static uart resource information
  ARM: EXYNOS: Remove static io-remapping for gic and combiner
  ARM: EXYNOS: Remove wrong I2S0 clock from peril clock
  ARM: EXYNOS: remove the MMC_CAP2_BROKEN_VOLTAGE
2012-11-21 10:10:37 -08:00
John W. Linville
d2ff5ee919 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2012-11-21 13:03:00 -05:00
Olof Johansson
24e93941f2 Merge branch 'clps711x/soc2' into next/soc
From Alexander Shiyan:

The main direction of this patchset - approaching the platform to the
possibility of using configurations with multiple platforms in a single
kernel. Added support of the majority of the necessary kernel symbol.
Also part of the driver code used only for the platform was moved to the
board code and converted to the use of standard drivers.

* clps711x/soc2:
  MAINTAINERS: Add ARM CLPS711X entry
  ARM: clps711x: Update defconfig due latest changes and new kernel symbols
  ARM: clps711x: Rename board files to match functionality
  ARM: clps711x: edb7211: Add support for NOR-Flash
  ARM: clps711x: Moving backlight controls of framebuffer driver to the board
  ARM: clps711x: p720t: Special driver for handling NAND memory is removed
  ARM: clps711x: Moving power management of framebuffer driver to the board
  ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed
  ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed
  ARM: clps711x: Add FIQ interrupt handling
  ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform
  ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform
  ARM: clps711x: cdb89712: Special driver for handling memory is removed
  ARM: clps711x: Always select AUTO_ZRELADDR for a platform
  ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed
  ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it
  ARM: clps711x: p720t: Using "leds-gpio" driver for LED control
  ARM: clps711x: Using platform_driver for ethernet device
2012-11-21 09:58:28 -08:00
John W. Linville
b311749477 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
	drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
	drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-21 12:57:56 -05:00
Alexander Shiyan
386ab5168b MAINTAINERS: Add ARM CLPS711X entry
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:47 -08:00
Alexander Shiyan
1a60fd762c ARM: clps711x: Update defconfig due latest changes and new kernel symbols
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:46 -08:00
Alexander Shiyan
53ee770035 ARM: clps711x: Rename board files to match functionality
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:46 -08:00
Alexander Shiyan
96754a1f86 ARM: clps711x: edb7211: Add support for NOR-Flash
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:45 -08:00
Alexander Shiyan
94760bf252 ARM: clps711x: Moving backlight controls of framebuffer driver to the board
This patch moves the backlight controls for clps711x-framebuffer driver
to the board code. To control we use "generic-bl" driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
[olof: fixed space/tab whitespace in drivers/video/clps711xfb.c]
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:45 -08:00
Alexander Shiyan
e377ca1e32 ARM: clps711x: p720t: Special driver for handling NAND memory is removed
This patch provide migration to using "gpio-nand" driver instead of using
special driver for handling NAND memory.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:44 -08:00
Alexander Shiyan
87c37b51ad ARM: clps711x: Moving power management of framebuffer driver to the board
This patch moves the power management for clps711x-framebuffer driver
to the board code. To control we use "platform-lcd" driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:44 -08:00
Alexander Shiyan
90383e0ac2 ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed
This patch provide migration to using "gpio-nand" and "basic-mmio-gpio"
drivers instead of using special driver for handling NAND memory.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 09:57:43 -08:00