When a node is removed that held a PW/EX lock, the
existing master node should invalidate the lvb on the
resource due to the purged lock.
Previously, the existing master node was invalidating
the lvb if it found only NL/CR locks on the resource
during recovery for the removed node. This could lead
to cases where it invalidated the lvb and shouldn't
have, or cases where it should have invalidated and
didn't.
When recovery selects a *new* master node for a
resource, and that new master finds only NL/CR locks
on the resource after lock recovery, it should
invalidate the lvb. This case was handled correctly
(but was incorrectly applied to the existing master
case also.)
When a process exits while holding a PW/EX lock,
the lvb on the resource should be invalidated.
This was not happening.
The lvb contents and VALNOTVALID flag should be
recovered before granting locks in recovery so that
the recovered lvb state is provided in the callback.
The lvb was being recovered after the lock was granted.
Signed-off-by: David Teigland <teigland@redhat.com>
There are also a few imx6 improvement patches in there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJQpeRkAAoJEFBXWFqHsHzOHMoH/3pxLWMHlaFFN70gm33GIEpj
6/P0afKhjEseQDfbvLPfRPwHTQIkw/xQ2rfSrZGUnhgAGN2SfOcxiREFpdChgqyb
b5kO+3oQpnQTFce6tuqCI8j4LAqr63AHhJPWZuDEBaR52Vs0i9gYr2Zwv7i+iUh7
fuLu+NDQLKOkEW7W97FRFVWKRGmSMhJYvhNn+kgleFUhvzUKpJ6n7kFsT05BSl97
EiJHtVxOv+RtlFvx7jrTr18NM2i4Kb4IzEfLzgYOowK9cwfNuhnaxsQvAUiGSa+z
EuvXdKN2btW0PtqHVBPdz5T0OzTyJheaCETKTqz0XM32/SVz5Ma3gZEEDagGLiw=
=zBAI
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo <shawn.guo@linaro.org>:
It's based on imx/multiplatform branch. Most of them are dts changes.
There are also a few imx6 improvement patches in there.
* tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx6q: select ARM and PL310 errata
ARM: imx6q: print silicon version on boot
ARM i.MX dts: Consistently add labels to devicenodes
ARM: dts: imx6q-sabresd: add volume up/down gpio keys
ARM: dts: imx53: pinctl update
ARM: imx: enable cpufreq for imx6q
ARM: dts: imx6q: enable snvs lp rtc
ARM: dts: imx6q-sabreauto: Add basic support
ARM: imx6q: let users input debug uart port number
ARM: dts: imx53-qsb: Make DA9053 regulator functional
ARM: dts: imx53-qsb: Use pinctrl for gpio-led
ARM i.MX dtsi: Add default bus-width property for esdhc controller
Signed-off-by: Arnd Bregmann <arnd@arndb.de>
source updates. One timer improvement and one defconfig update are
also included there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJQpeyAAAoJEFBXWFqHsHzOgpsH/3b8dVbanZFsAwm5z1rF2DY2
xrI5Xjqmk8K76CoZopRjQo/u6/SFbARzhClzCywBZKeVDM4Ah15bAN7wABmLgaVV
xMDF8pA9mDZCzRwKEH6SG85n2/lMupG6qjbDNG22FXYfUAYJRxopoSDdNjfkvYr0
Da5ZcvC9qvYnyyp37vYTI6CVO4EgJseoirvaJOKCALb5FFpzq0QEkEYK6IIx7pg3
j9K2ZPy4/MIrsQQMyiv9AFEbUkUWy+deuTHv9Sl8+ddoqPtqNy4EfICt+no5uBmp
frDg003/67Pz/fIm7lJ5IMBF4X0TW4OqMv9c2afG8/kJP34rXnBJVHdLKil731k=
=jEM1
-----END PGP SIGNATURE-----
Merge tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo <shawn.guo@linaro.org>:
It's mxs device tree changes for 3.8. The majority is device tree
source updates. One timer improvement and one defconfig update are
also included there.
* tag 'mxs-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs_defconfig: Improve USB related support
ARM: mxs: apf28dev: Add I2C and SPI support
ARM: mxs: Setup scheduler clock
ARM: dts: mxs: Add hog pins to Crystalfontz boards
ARM: dts: cfa10036: Use pinctrl for power led
ARM: mxs: apf28dev: Add LCD and backlight support
ARM: mxs: apf28dev: Add pinctrl and gpios
ARM: dts: mxs: Add 16 bits LCD screen muxing options for I.MX28
ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board
ARM: mx28: Skip OCOTP FEC MAC setup if in DT
ARM: dts: mxs: Add PWM3 muxing options for i.MX28
ARM: mxs: Add support for the Armadeus Systems APF28 module
ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion board
ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led
ARM: dts: imx23-olinuxino: Remove unneeded "default-on"
ARM: dts: imx28-evk: Use pinctrl for gpio-led
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From Michal Simek <michal.simek@xilinx.com>:
These are based on previous patches (arm-soc zynq/cleanup branch).
The branch is still based on rc3 but I have also tried to merged it
with the v3.7-rc5 and there is no issue.
* 'arm-next' of git://git.xilinx.com/linux-xlnx:
ARM: zynq: add clk binding support to the ttc
ARM: zynq: use zynq clk bindings
clk: Add support for fundamental zynq clks
ARM: zynq: dts: split up device tree
ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
ARM: zynq: dts: add description of the second uart
ARM: zynq: move arm-specific sys_timer out of ttc
zynq: move static peripheral mappings
zynq: remove use of CLKDEV_LOOKUP
zynq: use pl310 device tree bindings
zynq: use GIC device tree bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit "ARM: OMAP2+: Add device-tree support for 32kHz counter"
added structure omap_counter_match to the OMAP2 timer code. When
CONFIG_OMAP_32K_TIMER is not defined this structure generates the
following as it is not used.
CC arch/arm/mach-omap2/timer.o
arch/arm/mach-omap2/timer.c:163:28: warning: 'omap_counter_match'
defined but not used [-Wunused-variable]
Move the definition of omap_counter_match to avoid this warning when
CONFIG_OMAP_32K_TIMER is not set.
Thanks to Kevin Hilman for tracking down and reporting this problem.
Reported-by: Kevin Hilam <khilman@deeprootsystems.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Some source files are including dmtimer.h but not actually using any dmtimer
definitions or functions. Therefore, remove the inclusion dmtimer.h from these
source files.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Omar Ramirez Luna <omar.luna@linaro.org>
Remove unnecessary declaration of structure omap_dm_timer from dmtimer.h and
move the actual declaration of structure omap_dm_timer towards top of dmtimer.h
to avoid any compilation errors.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
The function omap_dm_timer_init_one() declares two local variables of
type int that are used to store the return value of functions called.
One such local variable is sufficient and so remove one of these local
variables.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
The OMAP2+ system timer code stores the physical address of the timer
but never uses it. Remove this and clean-up the code by removing the
local variable "size" and changing the names of the local variables
mem_rsrc and irq_rsrc to mem and irq, respectively.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
The omap_dm_timer_prepare function is a local function only used in the
dmtimer.c file. Therefore, make this a static function and remove its
declaration from the dmtimer.h file.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Only OMAP1 devices use the omap_dm_timer_reset() and so require the
omap_dm_timer_wait_for_reset() and __omap_dm_timer_reset() functions.
Therefore combine these into a single function called omap_dm_timer_reset()
and simplify the code.
The omap_dm_timer_reset() function is now the only place that is using the
omap_dm_timer structure member "sys_stat". Therefore, remove this member and
just use the register offset definition to simplify and clean-up the code. The
TISTAT register is only present on revision 1 timers and so check for this in
the omap_dm_timer_reset() function.
Please note that for OMAP1 devices, the TIOCP_CFG register does not have the
clock-activity field and so when we reset the timer for an OMAP1 device we
only need to configure the idle-mode field in the TIOCP_CFG register.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
accesses the interrupt controller memory causing random IRQ acknowledge.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=Ak+r
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 bugfix from Catalin Marinas:
"Arm64 page permission bug fix.
Without this fix, the CPU speculatively accesses the interrupt
controller memory causing random IRQ acknowledge."
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Distinguish between user and kernel XN bits
Add Samuel Iglesias Gonsalvez, Jens Taprogge and Greg Kroah-Hartman as
maintainers for the Industry Pack subsystem.
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the HDMI output found on Tamonten Evaluation Carrier boards.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Enable the HDMI output found on Plutux boards.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Hook up the required regulators, I2C DDC adapter and hotplug detect GPIO
to the Tamonten HDMI output. Carrier boards still need to explicitly
enable the output to use it.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Enable host1x, and the HDMI output. Harmony also has a DVI port with an
HDMI form-factor connector, driven by Tegra's LVDS output. This isn't
enabled yet, due to potential issues with having multiple outputs enabled.
Correct DDC I2C frequency to 100KHz.
Add dummy/fixed regulators to satisfy the HDMI driver.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
[swarren: add commit description, remove enable of DVI port]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
commit to avoid merge clashes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=7BtO
-----END PGP SIGNATURE-----
Merge tag 'mtu-clk-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/multiplatform
From Linus Walleij <linus.walleij@linaro.org>:
This tag contains two MTU patches based on top of the ux500 sparse IRQ
commit to avoid merge clashes.
* tag 'mtu-clk-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
clocksource/mtu-nomadik: use apb_pclk
clk: ux500: Register mtu apb_pclocks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable host1x, and the HDMI output. Harmony also has an optional LCD,
and a VGA output. The former isn't enabled due to potential issues with
having multiple outputs enabled. The latter isn't enabled since the
driver doesn't support VGA yet anyway.
Correct DDC I2C frequency to 100KHz.
Based on work by Thierry Reding for TrimSlice.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The ipack subsystem is cleaned up enough to now move out of the staging
tree, and into drivers/ipack.
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=CFfP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6 into next/dt
From Sascha Hauer <s.hauer@pengutronix.de>:
ARM i.MX dt updates for 3.8
* tag 'imx-dt' of git://git.pengutronix.de/git/imx/linux-2.6:
Add device tree file for the armadeus apf27
ARM i.MX: Add Ka-Ro TX25 devicetree
ARM i.MX25: Add devicetree
ARM i.MX25: Add devicetree support
ARM i.MX25: Add missing clock gates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adapt the copyright clause to CERN guidelines, as it has the copyright over
them.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
based on imx-multiplatform branch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=P3UZ
-----END PGP SIGNATURE-----
Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc
From Sascha Hauer <s.hauer@pengutronix.de>:
ARM i.MX SoC updates
based on imx-multiplatform branch.
* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
ARM i.MX51 babbage: Add display support
ARM i.MX6: Add IPU support
ARM i.MX51: Add IPU support
ARM i.MX53: Add IPU support
ARM i.MX5: switch IPU clk support to devicetree bindings
ARM i.MX6: fix ldb_di_sel mux
ARM i.MX51: setup MIPI during startup
mx2_camera: Fix regression caused by clock conversion
ARM: clk-imx27: Add missing clock for mx2-camera
ARM i.MX27: Fix low reference clock path
ARM: dts: imx27-3ds: Remove local watchdog inclusion
watchdog: Support imx watchdog on SOC_IMX53
ARM: mach-imx: Support for DryIce RTC in i.MX53
ARM : i.MX27 : split code for allocation of ressources of camera and eMMA
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull HID fix from Jiri Kosina:
"This has a build fix for architectures where memcmp() is macro, from
Jiri Slaby"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: microsoft: do not use compound literal - fix build
On AArch64, the meaning of the XN bit has changed to UXN (user). The PXN
(privileged) bit must be set to prevent kernel execution. Without the
PXN bit set, the CPU may speculatively access device memory. This patch
ensures that all the mappings that the kernel must not execute from
(including user mappings) have the PXN bit set.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Here are some USB fixes for the 3.7 tree.
Nothing huge here, just a number of tiny bugfixes resolving issues that
have been found, and two reverts of patches that were found to have
caused problems.
All of these have been in linux-next already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlCmRoUACgkQMUfUDdst+ynwAACg2if9XANSq4+GqdR7lSF5jCRO
hwMAoNh7XAM4GEXPB9m3rB395p9rHsN0
=31VS
-----END PGP SIGNATURE-----
Merge tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are some USB fixes for the 3.7 tree.
Nothing huge here, just a number of tiny bugfixes resolving issues
that have been found, and two reverts of patches that were found to
have caused problems.
All of these have been in linux-next already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "USB/host: Cleanup unneccessary irq disable code"
USB: option: add Alcatel X220/X500D USB IDs
USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs
USB: keyspan: fix typo causing GPF on open
USB: fix build with XEN and EARLY_PRINTK_DBGP enabled but USB_SUPPORT disabled
USB: usb_wwan: fix bulk-urb allocation
usb: otg: Fix build errors if USB_MUSB_OMAP2PLUS is selected as module
usb: musb: ux500: fix 'musbid' undeclared error in ux500_remove()
Revert "usb: musb: use DMA mode 1 whenever possible"
Here are two TTY driver fixes for 3.7-rc5.
They resolve a bug in the hvc driver that has been reported, and fix a
problem with the list of device ids in the max310x serial driver.
Both have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlCmRekACgkQMUfUDdst+ym94QCfZXb34WBxejNff2PowH9GZ7zL
NNAAoLi2YFB68la0KYxQ8zWBakL/QeyZ
=w8fs
-----END PGP SIGNATURE-----
Merge tag 'tty-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fixes from Greg Kroah-Hartman:
"Here are two TTY driver fixes for 3.7-rc5.
They resolve a bug in the hvc driver that has been reported, and fix a
problem with the list of device ids in the max310x serial driver.
Both have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: max310x: Add terminating entry for spi_device_id table
TTY: hvc_console, fix port reference count going to zero prematurely
Here is a single patch, a revert of an android driver patch, that
resolves a bug that has been reported in the Android alarm driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlCmRx4ACgkQMUfUDdst+yl3DwCbB9ekMEOeU8kRPiFozI8m702t
JbsAnikKlAk+EmoufP46+3+PVKh7582d
=pRqt
-----END PGP SIGNATURE-----
Merge tag 'staging-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg Kroah-Hartman:
"Here is a single patch, a revert of an android driver patch, that
resolves a bug that has been reported in the Android alarm driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "Staging: Android alarm: IOCTL command encoding fix"
another one fixing the check of a GPIO for USB host overcurrent.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJQphQoAAoJEAf03oE53VmQDs0H/1SCQfdQY8iLNs+3WGYhGngG
vMID1KWKmX6URrppi2gklr8weUoqYIVIA8I7+hLvr33tGrmSPRDrGV6vI5m0wAiJ
nkDNAkcGJ6dh/hhotakjqqKLkNtD1xDdErHMOO77fAK811gQj1sVp+8S+UwDQUf7
O1bbMpMar2/3c6cLb27GE7M4FrLwjmCnQxyQWyBrckPhPMzYNw3MbcW3CINXSYBY
q/FtFX7nsl2cfPsz8M2KCB43SKZT/bizkPnnjA5QQDhUPlsyTQWdS2z1RAwP2SZn
3WXoL4t4bNo1Ynusz416pB3djHqJwhxxWYxdMD91nIUXmmXkvIg+fWsdaNmaBI0=
=wlxI
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
From Nicolas Ferre <nicolas.ferre@atmel.com>:
Two little fixes, one related to the move to sparse irq and
another one fixing the check of a GPIO for USB host overcurrent.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/usbh: fix overcurrent gpio setup
ARM: at91/AT91SAM9G45: fix crypto peripherals irq issue due to sparse irq support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull s390 patches from Martin Schwidefsky:
"Some more bug fixes and a config change.
The signal bug is nasty, if the clock_gettime vdso function is
interrupted by a signal while in access-register-mode we end up with
an endless signal loop until the signal stack is full. The config
change is for aligned struct pages, gives us 8% improvement with
hackbench."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/3215: fix tty close handling
s390/mm: have 16 byte aligned struct pages
s390/gup: fix access_ok() usage in __get_user_pages_fast()
s390/gup: add missing TASK_SIZE check to get_user_pages_fast()
s390/topology: fix core id vs physical package id mix-up
s390/signal: set correct address space control
The babbage board has a DVI-I output which allows to output analog
and digital signals simultaneously. This patch adds support for it
to the devicetree. The DDC signals are not wired up on the board, so
DRM will fall back on default VESA modes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
This adds the IPU device to the devicetree along with the necessary pinctrl
settings for the parallel display outputs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
The i.MX5 clk support has platform based clock bindings for the
IPU. IPU support is devicetree only, so move them over to devicetree
based bindings. Also, enable MIPI clocks which do not have a device
associated with, but still need to be enabled to do graphics on
i.MX51.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
This adds the mmdc_ch1 as a possible parent for the ldb_di clk.
According to the datasheet, this clock can be selected at this mux.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
The MIPI interface has to be initialized for proper IPU support.
The MIPI officially is not supported, but still needs initialization.
This patch adds this to the SoC startup as all it does is poking
some magic values into registers for which we do not have documentation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Pull drm fixes from Dave Airlie:
"All pretty normal: one TTM oops fix, one radeon, a few intel and a
vmwgfx fix."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/ttm: remove unneeded preempt_disable/enable
ttm: Clear the ttm page allocated from high memory zone correctly
vmwgfx: return an -EFAULT if copy_to_user() fails
drm/radeon: fix logic error in atombios_encoders.c
drm/i915: do not ignore eDP bpc settings from vbt
drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
drm/i915/crt: fix DPMS standby and suspend mode handling
Since mx27 transitioned to the commmon clock framework in 3.5, the correct way
to acquire the csi clock is to get csi_ahb and csi_per clocks separately.
By not doing so the camera sensor does not probe correctly:
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
mx2-camera mx2-camera.0: Camera driver attached to camera 0
ov2640 0-0030: Product ID error fb:fb
mx2-camera mx2-camera.0: Camera driver detached from camera 0
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000
Adapt the mx2_camera driver to the new clock framework and make it functional
again.
Tested-by: Gaëtan Carlier <gcembed@gmail.com>
Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
During the clock conversion for mx27 the "per4_gate" clock was missed to get
registered as a dependency of mx2-camera driver.
In the old mx27 clock driver we used to have:
DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);
,so does the same in the new clock driver
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX27 clock tree can either be driven from a 26MHz oscillator
or from a 32768Hz oscillator. The latter was not properly implemented,
the mux between these two pathes was missing. Add this mux and while
at it rename the 'prem' (premultiplier) clk to 'fpm' (Frequency
Pre-Multiplier) to better match the datasheet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx27.dtsi already register the watchdog, so no need to do it in the board dts
file.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes watchdog support after devicetree switch for imx53
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch enables support for i.MX53 in addition to i.MX25 by providing a
dummy clock on i.MX53 since this one doesn't have a separate clock for internal
RTC but the driver requests one.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is to prepare addition of m2m-emmapp driver otherwise
IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor is
needed.
IMX_HAVE_PLATFORM_MX2_EMMA define has been added.
Changes since v1:
- Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform
due to pending patch in linux-media tree that will call
imx27_add_mx2_emmaprp().
Signed-off-by: Gaëtan Carlier <gcembed@gmail.com>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
clk-provider.h. This pull request fixes the regression by removing inline
usage from those function declarations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Y6xa
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull another clk layer fix from Michael Turquette:
"GCC 4.7 users get compilation errors from unnecessary use of inline in
clk-provider.h. This pull request fixes the regression by removing
inline usage from those function declarations."
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
clk: remove inline usage from clk-provider.h
I ported the driver supplied by SystemBase to mainline.
As the driver had MODULE_LICENSE("GPL") it is declared as a GPL module
and thus I have the right to distribute it upstream. Note, I did the
bare minimum to get it working. It still needs a lot of loving.
Cc: hjchoi <hjchoi@sysbas.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>