Ensure we select the WM1250-EV1 as the current software system
configuration demands it.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Those two tuners were always maintained. As I have devices with
tea5767, this is marked as Maintained.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While this file was always maintained, there was no explicit entry
for it.
There aren't many things happening at tm6000 side for a long time:
Driver works. This chip is already not sold anymore, so I don't
expect much changes on its side.
So, add a new entry with status equal to Odd fixes to better
reflect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While this file was always maintained, there was no explicit entry
for it.
There aren't many things happening at saa7134 side for a long time:
Driver works, and it is stable. When new patches are submitted,
they're new boards addition for hardware I don't have.
So, add a new entry with status equal to Odd fixes to better
reflect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While this file was always maintained, there was no explicit entry
for it.
There aren't many things happening at cx88 side for a long time:
Driver works, and it is stable. When new patches are submitted,
they're new boards addition for hardware I don't have.
So, add a new entry with status equal to Odd fixes to better
reflect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The kernel_thread() changes for FRV don't work, and FRV fails to boot,
starting with:
commit 02ce496f15
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Sep 18 22:18:51 2012 -0400
Subject: frv: split ret_from_fork, simplify kernel_thread() a lot
The problem is that the userspace registers are completely cleared when a
kernel thread is created and all subsequent user threads are then copied from
that. Unfortunately, however, the TBR and PSR registers are restored from the
pt_regs and the values they should be set to are clobbered by the memset.
Instead, copy across the old user registers as normal, and then merely alter
GR8 and GR9 in it if we're going to execute a kernel thread.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the preemption handling in FRV code where the PREEMPT_ACTIVE value is
incorrectly loaded into the threadinfo flags rather than the threadinfo
preemption count.
Unfortunately, the code cannot be simply converted to use
preempt_schedule_irq() as is because FRV uses virtual interrupt disablement to
cut down on the cost of actually disabling interrupts and thus
local_irq_enable() doesn't actually enable interrupts.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Al Viro <viro@ZenIV.linux.org.uk>
gcc-4.1.2 inlines weak functions, which causes FRV to fail when the dummy
thread_info_cache_init() gets inlined into start_kernel().
Signed-off-by: David Howells <dhowells@redhat.com>
Don't let objcopy transfer the GNU build_id note into the loadable image as it
is located at address 0 and the image ends up >3G in size.
Signed-off-by: David Howells <dhowells@redhat.com>
There aren't many things happening at bttv side for a long time:
Driver works, and it is stable. When new patches are submitted,
they're new boards addition for hardware I don't have. So,
move its status to Odd fixes to better reflect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In fact, the callers of dev_pm_qos_add_request(),
dev_pm_qos_update_request() and dev_pm_qos_remove_request() for
requests of type DEV_PM_QOS_FLAGS need to ensure that the target
device is not RPM_SUSPENDED before using any of these functions (or
be prepared for the new PM QoS flags to take effect after the device
has been resumed). Document this in their kerneldoc comments.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
userspace can query the original ipv4 destination address of a REDIRECTed
connection via
getsockopt(m_sock, SOL_IP, SO_ORIGINAL_DST, &m_server_addr, &addrsize)
but for ipv6 no such option existed.
This adds getsockopt(..., IPPROTO_IPV6, IP6T_SO_ORIGINAL_DST, ...).
Without this, userspace needs to parse /proc or use ctnetlink, which
appears to be overkill.
This uses option number 80 for IP6T_SO_ORIGINAL_DST, which is spare,
to use the same number we use in the IPv4 socket option SO_ORIGINAL_DST.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the TSC deadline mode is supported, LAPIC timer one-shot mode can be
implemented using IA32_TSC_DEADLINE MSR. An interrupt will be generated
when the TSC value equals or exceeds the value in the IA32_TSC_DEADLINE
MSR.
This enables us to skip the APIC calibration during boot. Also, in
xapic mode, this enables us to skip the uncached apic access to re-arm
the APIC timer.
As this timer ticks at the high frequency TSC rate, we use the
TSC_DIVISOR (32) to work with the 32-bit restrictions in the
clockevent API's to avoid 64-bit divides etc (frequency is u32 and
"unsigned long" in the set_next_event(), max_delta limits the next
event to 32-bit for 32-bit kernel).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: venki@google.com
Cc: len.brown@intel.com
Link: http://lkml.kernel.org/r/1350941878.6017.31.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When watching the irqs name of tegra i2c, all instances
irq name shows as tegra_i2c.
Passing the device name properly to have the irq names with
instance like tegra-i2c.0, tegra-i2c.1 etc.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Make sure to clk_prepare as well as clk_enable.
Signed-off-by: Philippe Begnic <philippe.begnic@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
This I2C master can do DMA and PIOQUEUE (PIO with FIFO). Originally,
only PIOQUEUE was supported and it had issues, then DMA support was added
this cycle. The original intention was to keep PIOQUEUE since it has
less overhead what is nice for small transfers. However, runtime
switching between PIOQEUE and DMA depending on the transfer size never
worked despite a lot of trying. Since PIOQUEUE mode itself was flaky
(polling at places where interrupts failed to work) and the
implementation also imposed a size limit for transfers, it is best to
remove the support, so users don't fall over its limitations. It also
makes the driver a lot cleaner and more robust. If somebody really wants
less overhead, plain PIO mode could still be implemented with the
addidtional advantage that this mode is also available on MX23, too.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
The driver leaves the device in power-down state anyway,
so there is nothing to do on suspend.
On resume, we just have to make sure the range and ADC
values are updated in the device since it may have been
powered down in suspend.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
If we encounter a leading '+' sign just skip over it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When parsing a fixed point number IIO stops parsing the string once it has
reached the last requested decimal place. This means that the remainder of the
string is silently accepted regardless, of whether it is part of a valid number
or not. This patch modifies the code to scan the whole string and only accept
valid numbers. Since fract_mult is 0 after the last decimal place any digit that
may follows won't affect the result.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently when parsing a fix-point number we silently skip any additional '.'
found in the string. E.g. '1.2.3.4' gets parsed as '1.234'. This patch
disallows this and returns an error if more than one '.' is encountered.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
remove unnecessary semicolon from the macro definition
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Daniel's backmerge
commit c2fb791692
Merge: 29de6ce6f0c058
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Oct 22 14:34:51 2012 +0200
Merge tag 'v3.7-rc2' into drm-intel-next-queued
to solve conflicts blew up (either git or Daniel was trying to be too
clever for their own good; it's usually convenient to blame tools ;) and
caused the changes of
commit 0c96c65b48
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed Sep 26 18:43:10 2012 +0300
drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag
in ironlake_crtc_mode_set() to be dropped.
Fix the call in ironlake_crtc_mode_set() again, and while at it, also fix
the new, copy-pasted haswell_crtc_mode_set() to use adjusted_mode.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the mother board version number is odd, emmaprp() for
format conversion + UVC camera will be used.
Otherwise mx2_camera and m2m-deinterlacer will be registered.
For both cases Coda video codec is registered.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no driver for it yet, so it will use spidev.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=X45P
-----END PGP SIGNATURE-----
Merge tag 'xtensa-next-20121101' of git://github.com/czankel/xtensa-linux
Pull Xtensa fixes from Chris Zankel:
"Some important bug fixes.
With the change to uapi, there was a bug introduced that results in an
empty syscall table (mult-inclusion bug). Switching to the generic
thread/execve allowed us to fix a bug we had in vfork()."
* tag 'xtensa-next-20121101' of git://github.com/czankel/xtensa-linux:
xtensa: switch to generic sys_execve()
xtensa: switch to generic kernel_execve()
xtensa: switch to generic kernel_thread()
xtensa: reset windowbase/windowstart when cloning the VM
xtensa: use physical addresses for bus addresses
xtensa: allow multi-inclusion for uapi/unistd.h
When buffer sharing with the i915 and using a 1680x1050 monitor,
the i915 gives is a 6912 buffer for the 6720 width, the code doesn't
render this properly as it uses one value to set the base address for
reading from the vmap and for where to start on the device.
This fixes it by calculating the values correctly for the device and
for the pixmap. No idea how I haven't seen this before now.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
The following fixes build errors on sparc. Without any DT support,
of_match_ptr is NULL and the below is a no-op. However, if just
CONFIG_OF is defined then so is of_match_ptr.
All useful parts of the gpio-fan DT support rely on CONFIG_OF_GPIO
anyway, so of_match_table should too.
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Inki writes:
"As I posted before, we have added a new git repository for Exynos drm
to MAINTAINERS file so change it to new one like below,
from git://git.infradead.org/users/kmpark/linux-samsung
to git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos
And this pull request includes the following:
- fix display on issue when user requested dpms mode changing.
- add git repository for Exynos drm to MAINTAINERS file.
- add support for ARCH_MULTIPLATFORM.
- and code clean."
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: exynos: removed warning due to missing typecast for mixer driver data
drm/exynos: add support for ARCH_MULTIPLATFORM
MAINTAINERS: Add git repository for Exynos DRM
drm/exynos: fix display on issue
Alex writes:
"This request is mostly load detection fixes from Egbert and me."
* 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add load detection support for ext DAC on R200 (v2)
DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms().
DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips.
DRM/Radeon: Clean up code in TV DAC load detection.
drm/radeon: fix ATPX function documentation
drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon
DRM/Radeon: On DVI-I use Load Detection when EDID is bogus.
DRM/Radeon: Fix primary DAC Load Detection for RV100 chips.
DRM/Radeon: Fix Load Detection on legacy primary DAC.
Daniel Vetter writes"
Nothing big at all for -fixes, just small stuff:
- Two patches to fix bugs on i830M
- ums regression fixer due to kicking firmeware fbs (Chris)
- tune down a too loud warning (Jani)
- be more careful with sdvo infoframes, which fixes a long-standing
sdvo-hdmi regression"
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Only kick out vesafb if we takeover the fbcon with KMS
drm/i915: be less verbose about inability to provide vendor backlight
drm/i915: clear the entire sdvo infoframe buffer
drm/i915: VGA needs to be on pipe A on i830M
drm/i915: fix overlay on i830M
The actual parameter order of hci_get_route is (dst, src) and not (src,
dst). All current callers use the right order but the header file shows
the parameters in the wrong order.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Since we have started to use local_amp_id for local AMP
Controller Id it makes sense to rename ctrl_id to remote_amp_id
since it represents remote AMP controller Id.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Add processing L2CAP Create Chan Request. When channel is created
save associated high speed link hs_hcon.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When receiving HCI Phylink Complete event run amp_physical_cfm
which initialize BR/EDR L2CAP channel associated with High Speed
link and run l2cap_physical_cfm which shall send L2CAP Create
Chan Request.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When deciding whether to send EFS configuration response with success,
check rather for existence of High Speed physical link hs_hcon then
ctrl_id. There might be cases when there is ctrl_id but high speed link
is not established yet.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Disconnect logical link for high speed channel hs_hchan
associated with L2CAP channel chan.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When receiving HCI Event: Command Status for Create Physical Link
with Error code remove AMP hcon.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
After physical link is created logical link needs to be created.
The process starts after L2CAP channel is created and L2CAP
Configuration Response with result PENDING is received.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When logical link creation is completed we need to save hs_hchan
which represents logical link instead of hs_hcon representing
physical link. hs_hcon shall be saved when receiving physical link
complete event.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>