Commit graph

361,091 commits

Author SHA1 Message Date
Padmanabh Ratnakar
67297ad8a6 be2net: Wait till resources are available for VF in error recovery
After FW error, driver should wait for NO_RESOURCE error to disappear before
proceeding with recovery.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 22:15:36 -04:00
Padmanabh Ratnakar
704e4c88f0 be2net: Fix change MAC operation for VF for Lancer
For changing MAC of VF from PF, delete MAC operation needs to be done before
assigning new MAC. Also in ndo_set_mac_address operation avoid delete MAC if
it has been already deleted by PF.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 22:15:36 -04:00
Padmanabh Ratnakar
d5c184731f be2net: Fix setting QoS for VF for Lancer
Use Lancer specific command to set QoS for VF.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 22:15:35 -04:00
Padmanabh Ratnakar
abb9395123 be2net: Fix driver load failure for different FW configs in Lancer
Driver assumes FW resource counts and capabilities while creating queues and
using functionality like RSS. This causes driver load to fail in FW configs
where resources and capabilities are reduced. Fix this by querying FW
configuration during probe and using resources and capabilities accordingly.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 22:15:35 -04:00
Arnaldo Carvalho de Melo
fc551f8d44 perf trace: Check if sample raw_data field is set
Sometimes we're segfaulting because we were expecting that the
perf_sample.raw_data field was set as requested, but in some cases
that needs further investigation, that field can be NULL, leading
to segfaults.

Make the tool more robust by checking that before calling any per event
handlers that may try to use that field.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g1fmodl6ys4lq8honbj1igoi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-21 23:07:36 -02:00
Arnaldo Carvalho de Melo
3a531260a1 perf trace: Validate syscall id before growing syscall table
In some cases the ID for a syscall read thru the raw_syscalls tracepoint
is bogus, still needs to be investigated why, but to make the tool more
robust first try to resolve the ID to a name via libaudit and if it
fails, don't grow the table.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0lsokw3xor7c4ijo45u6bauh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-21 23:07:36 -02:00
David S. Miller
e6e71054cd Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
This is a batch of fixes intended for the 3.7 stream.

Dan Carpenter brings a fix for a simple signedness bug that could
prevent the proper termination of a loop.

Felix Fietkau found a few more places that need to use
ieee80211_free_txskb for properly releasing SKBs used by mac80211.

Franky Lin offers a pair of brcmfmac fixes, both fixing simple state
reporting errors.

Hante Meuleman corrects an error reporting case that wasn't handling
all types of errors properly.

Johan Hedberg offers a fix for an issue discovered at the Bluetooth
UnPlug Fest.  Gustavo says "the patch fixes a failure to pair with
devices that support the LE Secure Connections feature."

Johannes Berg sends an iwlwifi fix to handle a message type that
is too large for the normal command mechanism.  He also provides a
mac80211 fix to use HT20 channels when HT40 channels are not permitted.

Jouni Malinen offers a mac80211 fix for a masking error that was
incorrectly marking some frames.

Piotr Haber provides a fix to make sure bcma devices are unregistered
properly.

Stanislav Yakovlev gives us a fix for a panic in the ipw2200 driver.

Stanislaw Gruszka sends a pair of fixes: one prevents a mismatch on
connection states between cfg80211 and mac80211; the other prevents
some frame corruption related to handling encryption.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:57:37 -04:00
Vipul Pandya
9a4da2cd99 cxgb4: Remove unnecessary #ifdef condition
This patch also fixes the build failure caused due to removal of #ifdef
CONFIG_CHELSIO_T4_OFFLOAD condition

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:46:03 -04:00
Rami Rosen
47b70db555 net:dev: remove double indentical assignment in dev_change_net_namespace().
This patch removes double assignment of err to -EINVAL in dev_change_net_namespace().

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:44:39 -04:00
Pavel Emelyanov
f7b86bfe8d sockopt: Make SO_BINDTODEVICE readable
The SO_BINDTODEVICE option is the only SOL_SOCKET one that can be set, but
cannot be get via sockopt API. The only way we can find the device id a
socket is bound to is via sock-diag interface. But the diag works only on
hashed sockets, while the opt in question can be set for yet unhashed one.

That said, in order to know what device a socket is bound to (we do want
to know this in checkpoint-restore project) I propose to make this option
getsockopt-able and report the respective device index.

Another solution to the problem might be to teach the sock-diag reporting
info on unhashed sockets. Should I go this way instead?

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:42:18 -04:00
Pavel Emelyanov
0da5f7c6d2 unix: Remove unused field from unix_sock
The struct sock *other one seem to be unused. Grep and make do not object.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:37:06 -04:00
Joe Perches
06e3041164 pktgen: Use ipv6_addr_any
Use the standard test for a non-zero ipv6 address.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:37:05 -04:00
Haiyang Zhang
3fbca4a2fe hyperv: Remove unnecessary comments in rndis_filter_receive_data()
Checked with Windows networking team, there is only one RNDIS message
in each netvsc packet.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21 20:35:40 -04:00
Dave Airlie
64acba6a7a Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel writes:
The big thing is the disabling of the hsw support by default, cc: stable.
We've aimed for basic hsw support in 3.6, but due to a few bad
happenstances we've screwed up and only 3.8 will have better modeset
support than vesa. To avoid yet another round of fallout from such a
gaffle on for the next platform we've added a module option to disable
early hw support by default. That should also give us more flexibility in
bring-up.

 Otherwise just small fixes:
 - 3 fixes from Egbert for sdvo corner cases
 - invert-brightness quirk entry from Egbert
 - revert a dp link training change, it regresses some setups
 - and shut up a spurious WARN in our gem fault handler.
 - regression fix for an oops on bit17 swizzling machines, introduce in 3.7
 - another no-lvds quirk

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Initialize obj->pages before use by i915_gem_object_do_bit17_swizzle()
  drm/i915: Add no-lvds quirk for Supermicro X7SPA-H
  drm/i915: Insert i915_preliminary_hw_support variable.
  drm/i915: shut up spurious WARN in the gtt fault handler
  Revert "drm/i915: Try harder to complete DP training pattern 1"
  DRM/i915: Restore sdvo_flags after dtd->mode->dtd Roundrtrip.
  DRM/i915: Don't clone SDVO LVDS with analog.
  DRM/i915: Add QUIRK_INVERT_BRIGHTNESS for NCR machines.
  DRM/i915: Don't delete DPLL Multiplier during DAC init.
2012-10-22 09:55:48 +10:00
Eric Sandeen
0be1fecd7e md faulty: use disk_stack_limits()
in:
fe86cdce block: do not artificially constrain max_sectors for stacking drivers

max_sectors defaults to UINT_MAX.  md faulty wasn't using
disk_stack_limits(), so inherited this large value as well.
This triggered a bug in XFS when stressed over md_faulty, when
a very large bio_alloc() failed.

That was on an older kernel, and I can't reproduce exactly the
same thing upstream, but I think the fix is appropriate in any
case.

Thanks to Mike Snitzer for pointing out the problem.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-22 10:44:55 +11:00
Tomasz Figa
61ef3c0bd3 ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dt
This patch adds missing initializer of .smp field of machine descriptor
of EXYNOS 4 DT machine.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-22 08:16:44 +09:00
Ingo Molnar
ef8ff74ed8 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent
Pull ftrace ring-buffer resizing fix from Steve Rostedt.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-21 19:53:34 +02:00
Jean Delvare
fd0587339d Documentation: Reflect the new location of the NMI watchdog info
Commit 9919cba7 ("watchdog: Update documentation") moved the
NMI watchdog documentation from nmi_watchdog.txt to
lockup-watchdogs.txt. Update the index file accordingly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/20121021120551.4656d99b@endymion.delvare
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-21 19:03:35 +02:00
Ingo Molnar
f38787f4f9 Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/urgent
Pull various uprobes bugfixes from Oleg Nesterov - mostly race and
failure path fixes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-21 18:18:17 +02:00
Ingo Molnar
0acfd009be Merge branch 'nohz/core' of git://github.com/fweisbec/linux-dynticks into timers/core
Pull uncontroversial cleanup/refactoring nohz patches from Frederic Weisbecker.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-21 18:14:02 +02:00
Ingo Molnar
957b9095ed Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
Pull event-wrapping Oprofile fix from Robert Richter.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-21 18:11:20 +02:00
Julia Lawall
edb6689386 ALSA: sound/isa/opti9xx/miro.c: eliminate possible double free
snd_miro_probe is a static function that is only called twice in the file
that defines it.  At each call site, its argument is freed using
snd_card_free.  Thus, there is no need for snd_miro_probe to call
snd_card_free on its argument on any of its error exit paths.

Because snd_card_free both reads the fields of its argument and kfrees its
argments, the results of the second snd_card_free should be unpredictable.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier f,free,a;
parameter list[n] ps;
type T;
expression e;
@@

f(ps,T a,...) {
  ... when any
      when != a = e
  if(...) { ... free(a); ... return ...; }
  ... when any
}

@@
identifier r.f,r.free;
expression x,a;
expression list[r.n] xs;
@@

* x = f(xs,a,...);
  if (...) { ... free(a); ... return ...; }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-21 14:17:43 +02:00
Pete Leigh
7a75e742fa ALSA: usb-audio: USB audio quirk for Roland VG-99 advanced mode
Without this quirk the VG-99 will work in standard mode (set under
USB on System menu page 2) giving 16 bits at 44.1 Khz audio in/out
but no midi, and is not recognised when set to advanced mode.

After applying this, I can also use the VG-99 in advanced mode: 24
24 bits audio in/out at 44.1 Khz, and midi in/out. Sysex is so far
untested.

In standard mode, the device appears with ID 0x00b3, so the
behaviour isn't affected by this quirk.

Thanks to Clemens Ladisch for simplifying and correcting my initial
attempt!

Signed-off-by: Pete Leigh <pete.leigh@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-21 12:05:03 +02:00
Takashi Iwai
999fc9f6aa ALSA: aloop - Close races at restarting the stream
There are small races opened in the check of running bit and the timer
lock.  Instead of adding yet more flag, just protect the whole racy
codes with the existing cable->lock.  As a bonus, we can get rid of
timer_lock now.

Reported-and-tested-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-21 10:53:14 +02:00
Wei Yongjun
950f40fdd4 ALSA: snd-usb: remove unused variable in init_pitch_v2()
The variable ep is initialized but never used
otherwise, so remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-21 10:43:27 +02:00
Takashi Iwai
4d4ca1e839 Merge branch 'dummy-ctl-inactive' of git://git.alsa-project.org/alsa-kprivate into for-next
Quite a few mixer applications do not handle deactivated controls
correctly.  This patch adds such controls to snd-dummy to make
crash^H^H^H^H^Htesting these apps easier.
2012-10-21 09:57:22 +02:00
Paul Walmsley
2bb2a5d30a ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver
The OMAP watchdog timer driver needs to determine what caused the SoC
to reset for its GETBOOTSTATUS ioctl.  So, define a set of standard
reset sources across OMAP SoCs.  For OMAP2xxx, 3xxx, and 4xxx SoCs,
define mappings from the SoC-specific reset source register bits to
the standardized reset source IDs.  Create SoC-specific PRM functions
that read the appropriate per-SoC register and use the mapping to
return the standardized reset bits.  Register the SoC-specific PRM
functions with the common PRM code via prm_register().  Create a
function in the common PRM code, prm_read_reset_sources(), that
calls the SoC-specific function, registered during boot.

This patch does not yet handle some SoCs, such as AM33xx.  Those SoCs
were not handled by the code this will replace.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 01:01:13 -06:00
Paul Walmsley
b5c5353d41 ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog)
On OMAP1, the existing OMAP watchdog driver reads a register directly
from a non-watchdog IP block.  It also does not convert the register's
contents into the standard WDIOF_* bits expected from the
GETBOOTSTATUS ioctl().

To move towards fixing these problems, create an function in
arch/arm/mach-omap1 to return the reset source data.  A subsequent
patch will provide this function to the watchdog driver via
platform_data.

In the long term, the best approach would be to move this function
to a new OMAP1 driver that handles access to the OMAP1 Clock
Generation and Reset Management IP block.  Then no platform_data would
be needed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 01:01:12 -06:00
Paul Walmsley
21325b25f4 ARM: OMAP2+: CM: prepare for use of cm_ll_data function pointers
There are several CM operations which behave similarly across OMAP2+
SoCs, but which have slight differences in their underlying
implementations.

This patch creates the support code for this function pointer
registration process.  No function pointers are included yet, but a
subsequent patch will create these for the module IDLEST registers.

This patch allows other code to use CM-provided data and operations
without needing to know which SoC is currently in use.  A further
description of the concept is provided in the patch entitled
"ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers".

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 01:01:12 -06:00
Paul Walmsley
e24c357374 ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers
There are several PRM operations which behave similarly across OMAP2+
SoCs, but which have slight differences in their underlying
implementations.  For example, to fetch the SoC's last reset sources,
different registers are read across OMAP2xxx, 3xxx, and 44xx, and
different bits are used on each SoC.  But the information returned is
so similar that a single, common interface for drivers is useful.

This patch creates the support code for this function pointer
registration process.  No function pointers are included yet, but a
subsequent patch will create one for the reset source API.

To illustrate the end goal with the above reset source example, each
per-SoC driver will use its own low-level implementation function --
e.g., prm2xxx.c would contain omap2xxx_prm_read_reset_sources().  This
function would read the appropriate register and remap the register
bits to a standard set of reset source bits.  When the prm2xxx.c
driver is loaded, it would register this function with the common PRM
driver, prm.c.  prm.c would then export a common function,
omap_prm_read_reset_sources().  Calling it would call through to the
function pointer for the currently-registered SoC PRM driver.  This
will allow other drivers to use PRM-provided data and operations
without needing to know which SoC is currently in use.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 01:01:11 -06:00
Paul Walmsley
4bd5259e53 ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM
Move the low-level SoC-specific clockdomain control functions into
cm*.c and prm*.c.  For example, OMAP2xxx low-level clockdomain
functions go into cm2xxx.c.  Then remove the unnecessary
clockdomain*xxx*.c files.

The objective is to centralize low-level CM and PRM register accesses
into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP
SoC-independent API to higher-level OMAP power management code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:11 -06:00
Paul Walmsley
ff4ae5d931 ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and
OMAP2xxx-specific macros into cm2xxx.[ch].  Move basic CM register
access functions into static inline functions in cm2xxx_3xxx.h,
leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c.

As part of this, split the CM and hwmod code that waits for devices to
become ready into SoC-specific functions.

This is in preparation for the upcoming move of this code to drivers/.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:11 -06:00
Paul Walmsley
498153995b ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM
Move the low-level SoC-specific powerdomain control functions into
prm*.c.  For example, OMAP2xxx low-level powerdomain functions go into
prm2xxx.c.  Then remove the unnecessary powerdomain*xxx*.c files.

The objective is to centralize low-level PRM register accesses into
the prm*.[ch] files, and then to export an OMAP SoC-independent API to
higher-level OMAP power management code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:10 -06:00
Paul Walmsley
139563ad27 ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files
Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and
OMAP2xxx-specific macros into prm2xxx.h.  (prm2xxx.c will be created
by a subsequent patch when it's needed.)  Move basic PRM register
access functions into static inline functions in prm2xxx_3xxx.h, leaving
only OMAP2/3 hardreset functions in prm2xxx_3xxx.c.

Also clarify the initcall function naming to reinforce that this code
is specifically for the PRM IP block.

This is in preparation for the upcoming powerdomain series and the
upcoming move of this code to drivers/.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:10 -06:00
Paul Walmsley
7a0c19337c ARM: OMAP2+: PRM: remove PRM weak functions
Remove the now-unused PRM weak functions from prm_common.c.  These
were formerly used to ensure that some OMAP2/3 PRM code would build on
OMAP4, but none of those functions ever would have worked on OMAP4 due
to an incompatible PRM register layout.  Now all that has been cleaned
up and these can be removed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:09 -06:00
Al Viro
a736427fa1 missing const in alpha callers of do_mount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-20 21:41:28 -04:00
Tejun Heo
ead5c47371 cgroup_freezer: don't use cgroup_lock_live_group()
freezer_read/write() used cgroup_lock_live_group() to synchronize
against task migration into and out of the target cgroup.
cgroup_lock_live_group() grabs the internal cgroup lock and using it
from outside cgroup core leads to complex and fragile locking
dependency issues which are difficult to resolve.

Now that freezer_can_attach() is replaced with freezer_attach() and
update_if_frozen() updated, nothing requires excluding migration
against freezer state reads and changes.

This patch removes cgroup_lock_live_group() and the matching
cgroup_unlock() usages.  The prone-to-bitrot, already outdated and
unnecessary global lock hierarchy documentation is replaced with
documentation in local scope.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Li Zefan <lizefan@huawei.com>
2012-10-20 16:33:12 -07:00
Tejun Heo
b4d18311d3 cgroup_freezer: prepare update_if_frozen() for locking change
Locking will change such that migration can happen while
freezer_read/write() is in progress.  This means that
update_if_frozen() can no longer assume that all tasks in the cgroup
coform to the current freezer state - newly migrated tasks which
haven't finished freezer_attach() yet might be in any state.

This patch updates update_if_frozen() such that it no longer verifies
task states against freezer state.  It now simply decides whether
FREEZING stage is complete.

This removal of verification makes it meaningless to call from
freezer_change_state().  Drop it and move the fast exit test from
freezer_read() - the only left caller - to update_if_frozen().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Li Zefan <lizefan@huawei.com>
2012-10-20 16:33:08 -07:00
Tejun Heo
8755ade683 cgroup_freezer: allow moving tasks in and out of a frozen cgroup
cgroup_freezer is one of the few users of cgroup_subsys->can_attach()
and uses it to prevent tasks from being migrated into or out of a
frozen cgroup.  This makes cgroup_freezer cumbersome to use especially
when co-mounted with other controllers.

->can_attach() is problematic in general as it can make co-mounting
multiple cgroups difficult - migrating tasks may fail for reasons
completely irrelevant for other controllers.  freezer_can_attach() in
particular is more problematic because it messes with cgroup internal
locking to ensure that the state verification performed at
freezer_can_attach() stays valid until migration is complete.

This patch replaces freezer_can_attach() with freezer_attach() so that
tasks are always allowed to migrate - they are nudged into the
conforming state from freezer_attach().  This means that there can be
tasks which are being migrated which don't conform to the current
cgroup_freezer state until freezer_attach() is complete.  Under the
current locking scheme, the only such place is freezer_fork() which is
updated to handle such window.

While this patch doesn't remove the use of internal cgroup locking
from freezer_read/write() paths, it removes the requirement to keep
the freezer state constant while migrating and enables such change.

Note that this creates a userland visible behavior change - FROZEN
cgroup can no longer be used to lock migrations in and out of the
cgroup.  This behavior change is intended.  I don't think the feature
is necessary - userland should coordinate accesses to cgroup fs anyway
- and even if the feature is needed cgroup_freezer is the completely
wrong place to implement it.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1350426526-14254-1-git-send-email-tj@kernel.org>
Cc: Matt Helsley <matthltc@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Li Zefan <lizefan@huawei.com>
2012-10-20 16:28:56 -07:00
Clemens Ladisch
16e434670e ALSA: dummy: allow disabling mixer controls
To make the testing of deactivated mixer controls easier (and for people
with common hardware, possible), add a control that deactivates some
other controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2012-10-20 23:46:13 +02:00
Paul E. McKenney
62da192129 rcu: Accelerate callbacks for CPU initiating a grace period
Because grace-period initialization is carried out by a separate
kthread, it might happen on a different CPU than the one that
had the callback needing a grace period -- which is where the
callback acceleration needs to happen.

Fortunately, rcu_start_gp() holds the root rcu_node structure's
->lock, which prevents a new grace period from starting.  This
allows this function to safely determine that a grace period has
not yet started, which in turn allows it to fully accelerate any
callbacks that it has pending.  This commit adds this acceleration.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-10-20 13:47:10 -07:00
Linus Torvalds
6f0c0580b7 Linux 3.7-rc2 v3.7-rc2 2012-10-20 12:11:32 -07:00
Chris Metcalf
0f8b983812 tile: support GENERIC_KERNEL_THREAD and GENERIC_KERNEL_EXECVE
Also provide an optimized current_pt_regs() while we're at it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-20 13:13:29 -04:00
Al Viro
733deca197 Drop struct pt_regs * argument in compat_sys_execve()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-20 13:13:11 -04:00
Greg Kroah-Hartman
47c153088b First round of fixes for IIO in 3.7 cycle, applies to 3.7-rc1.
Mostly a round of fixes for Analog Devices MEMs devices where some
 offset values were either completely incorrect, or in the wrong units.
 
 Also removal of an accidental duplicate entry in a Kconfig file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQgm3ZAAoJEFSFNJnE9BaIhgYP+wR1q2PnbTXhCwYkFl4oQp7/
 IyInTu9o0dOBD3yIxUxD8GRcbPfsdEmEXN8CqgsYlc5ne8XPJL2b7LdxcFuP6N3D
 o/umWETOPonLEegWoDM2b1Aw0NYV+EDqjd22U65yv7jcSCQLbOvFBtzNv2k1h5r/
 pp5/XzouRiFsDzjaWcNaBG7CKn9proepLR/nsEt2qIUb0TbGVig4asorfE2cs8A2
 JqLLk6EL0Pb9bSvQE1zo5GMdWTq3tmfT0qbgPDLc8JJ1FFgO7vBygB6JMxWyJs3R
 wo6/6PDrYs/JLfBaV/vH2cBG840gfWRNabanCMuYaC66ZsiSB6mudqtIAJWpDmB8
 9VV0UaX9tT/yZXO8Em38f75trpbMG+86VNwiPHXGU1/WjYGR0h9ZvpQzrSy3WFFg
 px+5TOL6nRjzUjqZ0vlSyW7iagr0qh7swNo1FeoRrGN++cAdkTiB+8tUe0Md2Rxl
 VwIIlJhys5KsWMEmtGs5aqGJYsedWR10iKvWq15e+O2WImiQF3CWtQMcBCDNpL0+
 Wnz+S6FhYFgy84Bngf6xVEZy1NMLl8kKDvBa3I44rw00I7XYM4goDViqMTCUdi7a
 u5AaqO5vP2YFGxfpcGovoDVJL4DutRnjw7HfBEp+9fGLAV/O+Jz3Gm3s7Felx03x
 M/YR2Sa7wvO/+SPyyzVE
 =Pt95
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

First round of fixes for IIO in 3.7 cycle, applies to 3.7-rc1.

Mostly a round of fixes for Analog Devices MEMs devices where some
offset values were either completely incorrect, or in the wrong units.

Also removal of an accidental duplicate entry in a Kconfig file.
2012-10-20 10:07:29 -07:00
Linus Torvalds
198190a188 Main changes:
- AArch64 Linux compilation fixes following 3.7-rc1 changes
   (MODULES_USE_ELF_RELA, update_vsyscall() prototype)
 - Unnecessary register setting in start_thread() (thanks to Al Viro)
 - ptrace fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.9 (GNU/Linux)
 
 iQIcBAABAgAGBQJQgsjyAAoJEGvWsS0AyF7xyZEP/2hIVC7OvY7zyqfvcTP+WxQr
 3ck30cEzzkssSHSU+M3wNRNQAhnuCoshvKZ+hJ8jephf71FyNYOVZOSlMUrmcF8p
 gahIfwmKQhOTmC5Rdb4f9lLaDJ4bXH70n33YrQKFkjYfcNwqe5+fdCcuvP+aZKJ+
 0BuXYlPczLkbi7ghcHl8kXr1E5mzzSQPlAUCw6R1+kEAYDCzXBT3uuLdIqcbQ62N
 bJ4BkMOAg51vFaMWMVZUtBq1f8zngc+QogCti6rubhAFfwcO0VS1zmELa28trIYa
 qyCr3eBeQq7v8M2crSqVrRdUDi1t5LjLZmP6RtfIkbfhCvrPuUg3N4votnPIgqT9
 MAkHUsH810jdO/iW7FBN3opuCvEejgx7JLGTjrM7TsjKDJjwG6u6Cmm8MEbiX8Pz
 8BMhm2k+BUnHkCOxiyi0hVVie81Xn9pxbdUzBSqDQnVYclZ3haJc1sXqnQDIuwn3
 QEKRAzxhXQZeE6wJu7+tuvmOs9G+wVARKfSaEyMPdAnVNLl8SN/vSqIPqJBuVa2X
 nCpuEOkX4yDVLcOyMePZvyyAlhLFH66K8q+CZtGv8Mn1+WR2mkiANKCW7mf1PEQk
 SNAYzlV7HcKYIJKq5Qpv91zi64UyAU6qgzeDUbuxFpOFlEDSWMbvixzUeyryXFYy
 fWevt1zE1plA02f2+9Wn
 =0gQo
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64

Pull arm64 fixes from Catalin Marinas:
 "Main changes:
   - AArch64 Linux compilation fixes following 3.7-rc1 changes
     (MODULES_USE_ELF_RELA, update_vsyscall() prototype)
   - Unnecessary register setting in start_thread() (thanks to Al Viro)
   - ptrace fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: fix alignment padding in assembly code
  arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints
  arm64: ptrace: make structure padding explicit for debug registers
  arm64: No need to set the x0-x2 registers in start_thread()
  arm64: Ignore memory blocks below PHYS_OFFSET
  arm64: Fix the update_vsyscall() prototype
  arm64: Select MODULES_USE_ELF_RELA
  arm64: Remove duplicate inclusion of mmu_context.h in smp.c
2012-10-20 09:48:10 -07:00
Takashi Iwai
cb766404e6 ALSA: hda - Fix silent headphone output from Toshiba P200
By some reason, Toshiba laptop doesn't like the EAPD turned up for the
headphone pin.  Add a fix up code to force to turn down EAPD for NID
0x15.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 18:20:55 +02:00
Marc Zyngier
aeed41a937 arm64: fix alignment padding in assembly code
An interesting effect of using the generic version of linkage.h
is that the padding is defined in terms of x86 NOPs, which can have
even more interesting effects when the assembly code looks like this:

ENTRY(func1)
	mov	x0, xzr
ENDPROC(func1)
	// fall through
ENTRY(func2)
	mov	x0, #1
	ret
ENDPROC(func2)

Admittedly, the code is not very nice. But having code from another
architecture doesn't look completely sane either.

The fix is to add arm64's version of linkage.h, which causes the insertion
of proper AArch64 NOPs.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-20 11:12:01 +01:00
Adrian Knoth
f27a64f997 ALSA: hdspm - Fix coding style in CTL_ELEM macros
checkpatch.pl discourages the use of spaces at the beginning of lines.
Some of the CTL_ELEM defines were not properly indented.

This patch replaces the leading spaces by tabs. No functionality is
changed, the commit is purely cosmetic.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:44:40 +02:00
Adrian Knoth
930f4ff078 ALSA: hdspm - Fix typo in kcontrol element on RME MADI cards
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-20 10:44:10 +02:00