Commit graph

361,091 commits

Author SHA1 Message Date
David Ahern
1342798cc1 perf tool: Precise mode requires exclude_guest
Summary of events per Peter:

  "Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This
  either results in guest memory corruption and or the hardware faulting and
  'crashing' the virtual machine.  Therefore we have to disable PEBS on VT-x
  enter and re-enable on VT-x exit, enforcing a strict exclude_guest.

  AMB IBS does work but doesn't currently support exclude_* at all,
  setting an exclude_* bit will make it fail."

This patch handles userspace perf command, setting the exclude_guest
attribute if precise mode is requested, but only if a user has not
specified a request for guest or host only profiling (G or H attribute).

Kernel side AMD currently ignores all exclude_* bits, so there is no impact
to existing IBS code paths. Robert Richter has a patch where IBS code will
return EINVAL if an exclude_* bit is set. When this goes in it means use
of :p on AMD with IBS will first fail with EINVAL (because exclude_guest
will be set). Then the existing fallback code within perf will unset
exclude_guest and try again. The second attempt will succeed if the CPU
supports IBS profiling.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Robert Richter <robert.richter@amd.com>
Tested-by: Robert Richter <robert.richter@amd.com>
Reviewed-by: Robert Richter <robert.richter@amd.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 12:43:31 -03:00
Emmanuel Grumbach
4e760f1ab2 iwlwifi: don't WARN when a non empty queue is disabled
This can happen when we shut down suddenly an interface.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:41:40 +02:00
Emmanuel Grumbach
378b8f7f3b iwlwifi: don't print the Intel banner twice
Once in bus enumeration is enough, no need to print it
again when the op_mode loads.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:35:50 +02:00
Emmanuel Grumbach
ac928f8dc8 iwlwifi: first deactivate a queue, then wipe out its data
Doing the opposite is wrong, the SCD wouldn't like someone
to clear its data while the queue is still active.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:33:28 +02:00
Emmanuel Grumbach
0adb52dee2 iwlwifi: use the new macro for the SCD Q STTS bits
Instead of hardcoding the expression, use the macro
provided in the previous patch.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:32:40 +02:00
Emmanuel Grumbach
986ea6c9e3 iwlwifi: wipe out the status of the SCD when we disable a queue
When we disable a queue, we don't want the SCD to remember anything
about this queue (what packet was transmitted but not acked, what
packed was acked etc...).
Wipe out all this data in its SRAM.

Constify the arguments to iwl_write_targ_mem_dwords on the way.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:31:53 +02:00
Johannes Berg
26c7af7cad iwlwifi: remove unused variables
Remove a number of variables that are assigned, but not used.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:31:29 +02:00
Johannes Berg
f042c2eb96 iwlwifi: make data frame tracing optional
When tracing in iwlwifi, we get all data. Most of
the time, we don't need it, and it just takes up
a lot of extra space in the trace.

Make this optional by recording the data into two
separate trace events if it is needed. Without it,
record only the content of non-data and EAPOL TX
frames.

As a result, tracing without the data tracepoints
will record meta information including the 802.11
headers for all frames but will not record the
contents of data frames to reduce trace overhead.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:30:45 +02:00
Johannes Berg
2a79e45eed iwlwifi: improve oversized command warning
When warning about a command that is too large,
print out the command name/ID to help figure
out which place is attempting to send a command
that is too large.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:30:15 +02:00
Johannes Berg
8f7b8db6e0 iwlwifi: fix 6000 series channel switch command
The channel switch command for 6000 series devices
is larger than the maximum inline command size of
320 bytes. The command is therefore refused with a
warning. Fix this by allocating the command and
using the NOCOPY mechanism.

Cc: stable@kernel.org
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16 16:28:36 +02:00
Joerg Roedel
c2ff5cf529 iommu/amd: Work around wrong IOAPIC device-id in IVRS table
On some systems the BIOS puts the wrong device-id for the
IO-APIC into the IVRS table. The result is that interrupt
remapping is not working for the IO-APIC irqs. This usually
means a kernel panic at boot because the timer is not
working.
Fix this kernel panic by disabling interrupt remapping if
this problem is discovered in the IVRS table.

Reported-by: Andrew Oakley <andrew@ado.is-a-geek.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-16 14:52:51 +02:00
Matt Fleming
78bef24e84 MAINTAINERS: Add EFI git repository location
People keep asking for the whereabouts of this git tree, so add it to
MAINTAINERS.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2012-10-16 13:12:19 +01:00
Alan Cox
db8310183a iscsi: fix check keys
We report a bogus printk due to a missing break

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-16 12:57:30 +02:00
Tomi Valkeinen
6fa44907ee OMAPDSS: HDMI: use omapdss_version
Use omapdss_version in hdmi.c to select the proper hdmi features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:44:00 +03:00
Tomi Valkeinen
bd81ed0818 OMAPDSS: DSS: use omapdss_version
Use omapdss_version in dss.c to select the proper dss features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:59 +03:00
Tomi Valkeinen
84b4762302 OMAPDSS: DISPC: use omapdss_version
Use omapdss_version in dispc.c to select the proper dispc features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:58 +03:00
Tomi Valkeinen
649514c65c OMAPDSS: use omapdss_version in dss_features.c
Pass the omapdss_version to dss_features.c and use it to select the
proper dss features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:57 +03:00
Tomi Valkeinen
acd18af93a OMAPDSS: add omapdss_version
Add new enum, omapdss_version, that is used to tell which DSS hardware
version the SoC has. This enum is initialized during platform init, and
passed in the platform data to omapdss driver.

Note that the versions are not "continuous", that is, you cannot check
if the version is less or greater than something, but you need to check
for exact version match. In other words, this is invalid:

/* test if DSS is 3630 or earlier */
if (ver <= OMAPDSS_VER_OMAP3630)
	...

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:56 +03:00
Tomi Valkeinen
e7d9facf0b Linux 3.7-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQezF+AAoJEHm+PkMAQRiG2wkIAIpxXCCZo8SsxOimo0jkb50r
 Ouufv/92lz7LNqPEsaQDYXNni+1ObEnADU2XbXdfJ6pdQkfw3Phu/IIzZAufIS21
 ZTDgK04D1HA0inx8ywHr96bSEfHu0RCuj5jMu2/N5F5jZbvvaHpeIaCfKWXtQ2Tg
 yAuFY6mp6MVXCJPnJbvb5inVpDlfAXCHQ4BLFHQL0MhfPW0eNHhgyWJQsn8UywxK
 rYdIet1RAL+iY+C7gr5SIRXRg0CF8zAyBRJMIyB8kfY26YvwEy75zHf1TavxtT1X
 o4B/WSqO4JbAM4yuRFFpb/ehNtfalxLX7JFexSHzBRev95yllQ6a3UTgtM1Ch8E=
 =Vg7R
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc1'

Merge Linux 3.7-rc1 to get latest upstream changes.
2012-10-16 13:30:09 +03:00
Alexandre Pereira da Silva
69da85edba usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04
The STOTG04 is an replacement for ISP1301.

Most of the registers on STOTG04 are the same as on ISP1301, but the
register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the
ST part.

This is a work around for this by using the interrupt source register that
should behave the same on both parts and has the needed information.

Tested-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 13:11:27 +03:00
Alexandre Pereira da Silva
0696f92970 usb: gadget: lpc32xx_udc: Disable setup request error
This message is an debugging message. It's useful for finding protocol
details but it's not necessarily an error.

Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 13:10:02 +03:00
kuninori.morimoto.gx@renesas.com
4cd2f59987 usb: renesas_usbhs: gadget: add usb_gadget_ops :: pullup support
This patch adds usbhs_sys_function_pullup() to control
D+ line for USB function, and enabled pullup support on mod_gadget.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 13:09:50 +03:00
Srinivas Kandagatla
ca21dda64b usb: phy: mv_otg: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 12:49:12 +03:00
Stephen Warren
8355b0208a usb: phy: tegra remove include of <mach/iomap.h>
Almost nothing from this file is used, and the file will hopefully be
deleted soon. Copy the tiny portions that are used directly into
tegra_usb_phy.c. I believe that Venu Byravarasu is working on cleaning up
our USB driver, and those cleanups will remove the need for these
constants.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 12:48:38 +03:00
Kuninori Morimoto
d5c6a1e024 usb: renesas_usbhs: fixup interrupt status clear method
When interrupt happened, renesas_usbhs driver gets irq status
by usbhs_status_get_each_irq(), and cleared all status by using 0.
But, this method is incorrect,
since extra interrupt might occur between them.
This patch cleared corresponding bits only

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 12:47:40 +03:00
Kuninori Morimoto
c2fa3edc58 usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st pos
__usbhs_for_each_pipe() is the macro which moves around each pipe,
but it has a bug which didn't care about 1st pipe's position.
Because of this bug, it moves around
pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3...
This patch modifies it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16 12:47:35 +03:00
Linus Walleij
61a32b0203 ARM: ux500: delete duplicate macro
Some merge mishap has caused the DB8500_PIN_SLEEP() macro to
appear twice. Get rid of the suplus copy.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-16 10:40:51 +02:00
Ingo Molnar
8ed92e51f9 sched: Add WAKEUP_PREEMPTION feature flag, on by default
As per the recent discussion with Mike and Linus, make it easier to
test with/without this feature. No change in default behavior.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-izoxq4haeg4mTognnDbwcevt@git.kernel.org
2012-10-16 10:05:27 +02:00
Daniel Vetter
b06fbda328 Revert "drm/i915: Try harder to complete DP training pattern 1"
This reverts commit 2477367083.

If (for whatever reason) the DP sink device never asks for the maximal
voltage level, we never don't hit the check that should bail us out
after 5 retries of the same voltage. Which leads to an endless loop in
the DP link training code, which hangs the driver.

Now some more DP link training experiments on eDP panels seem to
indicate that our training algorithm isn't robust enough anyway and
needs more work. Hence for 3.7-fixes, let's just revert the regressing
commit instead of trying to apply more duct-tape.

Reported-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 10:01:56 +02:00
Egbert Eich
e751823da2 DRM/i915: Restore sdvo_flags after dtd->mode->dtd Roundrtrip.
For TV and LVDS encoders intel_sdvo_set_input_timings_for_mode()
is called to pass a mode to the sdvo chip and retrieve a dtd
containing information needed to calculate the adjusted_mode which
is done by intel_sdvo_get_dtd_from_mode().
To set this adjusted_mode as input mode for the sdvo chip, a dtd is
recalculated using intel_sdvo_get_mode_from_dtd(). During this round
trip the sdvo_flags contained in the dtd obtained from the hardware
are lost.
Since these flags cannot be ignored in all cases this patch preserves
and restores them.

This regression has been introduced in

commit 6651819b4b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Apr 1 19:16:18 2012 +0200

    drm/i915: handle input/output sdvo timings separately in mode_set

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:39:04 +02:00
Egbert Eich
e3b86d6941 DRM/i915: Don't clone SDVO LVDS with analog.
SDVO LVDS are not clonable as the input mode gets adjusted by
the LVDS encoder.

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:39:04 +02:00
Egbert Eich
5f85f176c2 DRM/i915: Add QUIRK_INVERT_BRIGHTNESS for NCR machines.
NCR machines with LVDS panels using Intel chipsets need to have the
QUIRK_INVERT_BRIGHTNESS bit set.
Unfortunately NCR doesn't set a meaningful subvendor/subdevice ID,
therefore we add a DMI dependent quirk list.

Signed-off-by: Egbert Eich <eich@suse.de>
[danvet: fixup whitespace fail.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:38:59 +02:00
Egbert Eich
6478d414fe DRM/i915: Don't delete DPLL Multiplier during DAC init.
The DPLL multipiler is set up in intel_display.c:i9xx_update_pll()
called from i9xx_crtc_mode_set().
There the DPLL multiplier is adjusted so that the SDVO gets a sufficient
bus clock.
When cloning a CRTC between an SDVO driven encoder and the standard
DAC the DAC setup code reseted the multiplier value to 1 thus undoing
the correct setup. There is no need to touch the multiplier in the DAC
setup code: the correct value (i.e. 1 in case no SDVO encoder is used)
is set by i9xx_update_pll() already.
A comment at the code suggested that this code is a left over from the
days when there was no setup for clone modes.

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:33:38 +02:00
Ben Widawsky
ecd8faeac4 drm/i915: Add rc6vids to debugfs
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:23:52 +02:00
Ben Widawsky
31643d54a7 drm/i915: Workaround to bump rc6 voltage to 450
BIOS should be setting the minimum voltage for rc6 to be 450mV. Old or
buggy BIOSen may not be doing this, so we correct it for them. Ideally
customers should update the BIOS as only it would know the optimal
values for the platform, so we leave that fact as a DRM_ERROR for the
user to see.

Unfortunately this isn't fixing any of the issues it was targeted to
fix, but it is documented that we must do it.

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: bikeshedded loglevel of the "your bios is broken message" to
debug.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:23:52 +02:00
Ben Widawsky
42c0526c93 drm/i915: Extract PCU communication
There is a special mechanism for communicating with the PCU already
being used for the ring frequency stuff. As we'll be needing this for
other commands, extract it now to make future code less error prone and
the current code more reusable.

I'm not entirely sure if this code matches 1:1 with the previous code
behaviorally. Functionally however, it should be the same.

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Fixup compile fail reported by Wu Fengguang.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-16 09:23:26 +02:00
Dave Airlie
8a00b6af4c nouveau: fix warning on 32-bit build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16 16:40:53 +10:00
Dave Airlie
30f02cb7dd Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
minor set of nouveau fixes.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/bios: fix typo in error message
  drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP
  drm/nv50/fb: fix double free of vram mm
  drm/nouveau/pm: do not stop reclocking if failing to set the fan speed
  drm/nouveau/pm: fix a typo related to the move to the therm subdev
  drm/nouveau/hwmon: fix the initialization condition
2012-10-16 16:34:11 +10:00
Ben Skeggs
565f571c48 drm/nouveau/bios: fix typo in error message
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16 16:29:17 +10:00
Max Filippov
df1b4b91e5 drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP
ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no
point calling it otherwise.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16 16:29:12 +10:00
Marcin Slusarz
5db4c6c5dd drm/nv50/fb: fix double free of vram mm
nouveau_fb_destroy already calls nouveau_mm_fini on vram mm.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16 16:29:08 +10:00
Martin Peres
eed6187d9f drm/nouveau/pm: do not stop reclocking if failing to set the fan speed
With the introduction of fan management modes, fan may not be drivable.
We should allow reclocking nonetheless.

This return was stupid to begin with since it may have left the card
in an intermediate state (clocks corresponding to a perflvl and voltage
corresponding to another one). The reclocking code will need to be
rewritten in a near-future in order to provide a better error handling.

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16 16:29:02 +10:00
Martin Peres
a6fd5cf3c9 drm/nouveau/pm: fix a typo related to the move to the therm subdev
Reported-by: Vekin on IRC
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16 16:28:58 +10:00
Martin Peres
a5f5af8698 drm/nouveau/hwmon: fix the initialization condition
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16 16:28:55 +10:00
Lee Jones
0530494933 ASoC: ux500_msp_i2s: Fix devm_* and return code merge error
Some ux500_msp_i2s patches clashed with:

b18e93a493
ASoC: ux500_msp_i2s: better use devm functions and fix error return code

... leaving the driver uncompilable. This patch fixes the
issues encountered.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-16 14:14:31 +09:00
Lee Jones
39013bd60e ASoC: Ux500: Dispose of device nodes correctly
When of_parse_phandle() is used to find a device node, its
reference count is incremented by the helper. Once we're
finished with them, it's our responsibly to ensure they
are freed in the correct manor.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-16 14:14:24 +09:00
Max Filippov
795ca178c4 xtensa: Use Kbuild infrastructure to handle asm-generic headers
Use Kbuild infrastructure to handle the asm-generic headers
and remove the wrapper headers that call them.

This only affects headers that do nothing but include the generic
equivalent. It does not touch any header that does a little more.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:49:50 -07:00
David Howells
83596729ad UAPI: (Scripted) Disintegrate arch/xtensa/include/asm
UAPI: (Scripted) Disintegrate arch/xtensa/include/asm

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:48:53 -07:00
Max Filippov
4ded6282ca xtensa: fix unaligned usermode access
- correct use of .config #define name;
      CONFIG_UNALIGNED_USER ---> CONFIG_XTENSA_UNALIGNED_USER

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Pete Delaney <piet@tensilica.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:48:41 -07:00
Max Filippov
bc5378fcba xtensa: reorganize SR referencing
- reference SRs by names where possible, not by numbers;
- get rid of __stringify around SR names where possible;
- remove unneeded SR names from asm/regs.h;
- add SREG_ prefix to remaining SR names;

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:48:08 -07:00