Commit graph

361,091 commits

Author SHA1 Message Date
Tejun Heo
c5f66e99b7 timer: Implement TIMER_IRQSAFE
Timer internals are protected with irq-safe locks but timer execution
isn't, so a timer being dequeued for execution and its execution
aren't atomic against IRQs.  This makes it impossible to wait for its
completion from IRQ handlers and difficult to shoot down a timer from
IRQ handlers.

This issue caused some issues for delayed_work interface.  Because
there's no way to reliably shoot down delayed_work->timer from IRQ
handlers, __cancel_delayed_work() can't share the logic to steal the
target delayed_work with cancel_delayed_work_sync(), and can only
steal delayed_works which are on queued on timer.  Similarly, the
pending mod_delayed_work() can't be used from IRQ handlers.

This patch adds a new timer flag TIMER_IRQSAFE, which makes the timer
to be executed without enabling IRQ after dequeueing such that its
dequeueing and execution are atomic against IRQ handlers.

This makes it safe to wait for the timer's completion from IRQ
handlers, for example, using del_timer_sync().  It can never be
executing on the local CPU and if executing on other CPUs it won't be
interrupted until done.

This will enable simplifying delayed_work cancel/mod interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-5-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:31 +02:00
Tejun Heo
fc683995a6 timer: Clean up timer initializers
Over time, timer initializers became messy with unnecessarily
duplicated code which are inconsistently spread across timer.h and
timer.c.

This patch cleans up timer initializers.

* timer.c::__init_timer() is renamed to do_init_timer().

* __TIMER_INITIALIZER() added.  It takes @flags and all initializers
  are wrappers around it.

* init_timer[_on_stack]_key() now take @flags.

* __init_timer[_on_stack]() added.  They take @flags and all init
  macros are wrappers around them.

* __setup_timer[_on_stack]() added.  It uses __init_timer() and takes
  @flags.  All setup macros are wrappers around the two.

Note that this patch doesn't add missing init/setup combinations -
e.g. init_timer_deferrable_on_stack().  Adding missing ones is
trivial.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-4-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:30 +02:00
Tejun Heo
5a9af38d05 timer: Relocate declarations of init_timer_on_stack_key()
init_timer_on_stack_key() is used by init macro definitions.  Move
init_timer_on_stack_key() and destroy_timer_on_stack() declarations
above init macro defs.  This will make the next init cleanup patch
easier to read.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-3-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:30 +02:00
Tejun Heo
e52b1db37b timer: Generalize timer->base flags handling
To prepare for addition of another flag, generalize timer->base flags
handling.

* Rename from TBASE_*_FLAG to TIMER_* and make them LU constants.

* Define and use TIMER_FLAG_MASK for flags masking so that multiple
  flags can be handled correctly.

* Don't dereference timer->base directly even if
  !tbase_get_deferrable().  All two such places are already passed in
  @base, so use it instead.

* Make sure tvec_base's alignment is large enough for timer->base
  flags using BUILD_BUG_ON().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-2-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:28:30 +02:00
Kuninori Morimoto
17d83127d4 genirq: Export dummy_irq_chip
Export dummy_irq_chip to modules to allow them to do things such as

	irq_set_chip_and_handler(virq,
				 &dummy_irq_chip,
				 handle_level_irq);
This fixes

	ERROR: "dummy_irq_chip" [drivers/gpio/gpio-pcf857x.ko] undefined!

when gpio-pcf857x.c is being built as a module.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/871ujstrp6.wl%25kuninori.morimoto.gx@renesas.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:14:23 +02:00
Kuninori Morimoto
b3ae66f209 genirq: Export irq_set_chip_and_handler_name()
Export irq_set_chip_and_handler_name() to modules to allow them to
do things such as

	irq_set_chip_and_handler(....);

This fixes

	ERROR: "irq_set_chip_and_handler_name" \
	          [drivers/gpio/gpio-pcf857x.ko] undefined!

when gpio-pcf857x.c is being built as a module.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/873948trpk.wl%25kuninori.morimoto.gx@renesas.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-21 16:14:23 +02:00
Sachin Kamat
1be437fa53 ASoC: soc-compress: Remove unused variable
codec_dai is not used in the function.

sound/soc/soc-compress.c: In function ‘soc_compr_set_params’:
sound/soc/soc-compress.c:156:22: warning:
unused variable ‘codec_dai’ [-Wunused-variable]

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-21 15:09:44 +01:00
Vinod Koul
9d2667a910 ASoC: compress - fix code alignment
Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Namarta Kohli <namartax.kohli@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-21 15:09:44 +01:00
Alex Deucher
676bc2e1e4 Revert "drm/radeon: fix bo creation retry path"
This reverts commit d1c7871ddb.

ttm_bo_init() destroys the BO on failure. So this patch makes
the retry path work with freed memory.  This ends up causing
kernel panics when this path is hit.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-21 09:55:01 -04:00
Arnaldo Carvalho de Melo
3ab484b862 perf tools: Add missing files to build the python binding
Changeset 0f6a3015:
"perf tools: Support user regs and stack in sample parsing"

uses hweight_long in evsel.c, so we need to drag util/hweight.c
to the python binding.

Ditto for ee8dd3c:
"perf tools: Change strlist to use the new rblist"

where we need to add util/rblist.c.

Now twatch.py works again:

 # export PYTHONPATH=~acme/git/build/perf/python/
 # ~acme/git/linux/tools/perf/python/twatch.py
 cpu:  4, pid: 23639, tid: 23639 { type: fork, pid: 30659, ppid: 23639, tid: 30659, ptid: 23639, time: 36287872076780}
 cpu:  5, pid: 30659, tid: 30659 { type: comm, pid: 30659, tid: 30659, comm: ls }
 cpu:  5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873681539}
 cpu:  4, pid: 23639, tid: 23639 { type: fork, pid: 30660, ppid: 23639, tid: 30660, ptid: 23639, time: 36291720420480}
 cpu:  5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873685714}
 cpu:  5, pid: 30660, tid: 30660 { type: comm, pid: 30660, tid: 30660, comm: git }
 ^C
 KeyboardInterrupt

Reported-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gmq82zp5blin9aml9g5tzokr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-21 10:31:40 -03:00
Geert Uytterhoeven
cbe05685c1 s390: Always use "long" for ssize_t to match size_t
On s390x-linux-gcc, __SIZE_TYPE__ expands to "long unsigned int" for both
32-bit s390 and 64-bit s390x, as
gcc-4.6.3-nolibc/s390x-linux/lib/gcc/s390x-linux/4.6.3/plugin/include/config/s390/linux.h
has

    #define SIZE_TYPE (TARGET_64BIT ? "long unsigned int" : "long unsigned int")

To match this, __kernel_size_t is always set to "long unsigned int".

But while __kernel_ssize_t is "long" on 64-bit s390x, it is "int" on 32-bit
s390, causing compiler warnings like:

    fs/quota/quota_tree.c:372:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'ssize_t' [-Wformat]

To fix this, __kernel_ssize_t should be "long", irrespective of word size.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-21 15:23:04 +02:00
Xu, Anhua
de9932d13c drm/i915: fix reassignment of variable "intel_dp->DP"
In intel_dp_mode_set we OR in the exact same bits twice at the same
spot. Kill one of the redundant assignments.

This little regression was introduced by:
commit 417e822dee
Author: Keith Packard <keithp@keithp.com>
Date:   Tue Nov 1 19:54:11 2011 -0700

    drm/i915: Treat PCH eDP like DP in most places

	PCH eDP has many of the same needs as regular PCH DP connections,
	including the DP_CTl bit settings, the TRANS_DP_CTL register.

The reachable tag for this commit is: v3.1-5461-g417e822

Signed-off-by: Anhua Xu <anhua.xu@intel.com>
[danvet: Improved the commit message somewhat and ensured the diff is
clearer.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:36 +02:00
Chris Wilson
d8cb508669 drm/i915: Try harder to allocate an mmap_offset
Given the persistence of an offset for the lifetime of an object, itis
easy to contemplate how the mmap space becomes badly fragmented to the
point that further allocations fail with ENOSPC. Our only recourse at
this point is to try to purge the objects to release some space and
reattempt the allocation.

References: https://bugs.freedesktop.org/show_bug.cgi?id=39552
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:36 +02:00
Chris Wilson
c110a6d728 drm/i915: Show pin count in debugfs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:35 +02:00
Chris Wilson
b7abb71443 drm/i915: Show (count, size) of purgeable objects in i915_gem_objects
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:23 +02:00
Chris Wilson
c4670ad080 drm/i915: Add some sanity checks to unbound tracking
A pair of universally true checks that just need to be put in the right
place depending on where in the patch sequence you go. Note that
i915_gem_object_put_pages_gtt() already gains the
BUG_ON(obj->gtt_space), but on reflection that needed to migrate to
put_pages().

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:20 +02:00
Chris Wilson
6c085a728c drm/i915: Track unbound pages
When dealing with a working set larger than the GATT, or even the
mappable aperture when touching through the GTT, we end up with evicting
objects only to rebind them at a new offset again later. Moving an
object into and out of the GTT requires clflushing the pages, thus
causing a double-clflush penalty for rebinding.

To avoid having to clflush on rebinding, we can track the pages as they
are evicted from the GTT and only relinquish those pages on memory
pressure.

As usual, if it were not for the handling of out-of-memory condition and
having to manually shrink our own bo caches, it would be a net reduction
of code. Alas.

Note: The patch also contains a few changes to the last-hope
evict_everything logic in i916_gem_execbuffer.c - we no longer try to
only evict the purgeable stuff in a first try (since that's superflous
and only helps in OOM corner-cases, not fragmented-gtt trashing
situations).

Also, the extraction of the get_pages retry loop from bind_to_gtt (and
other callsites) to get_pages should imo have been a separate patch.

v2: Ditch the newly added put_pages (for unbound objects only) in
i915_gem_reset. A quick irc discussion hasn't revealed any important
reason for this, so if we need this, I'd like to have a git blame'able
explanation for it.

v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Split out code movements and rant a bit in the commit message
with a few Notes. Done v2]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-21 14:34:11 +02:00
Artem Bityutskiy
c212f4020d UBIFS: fix replay regression
Commit "d51f17e UBIFS: simplify reply code a bit" introduces a bug with the
following symptoms:

UBIFS error (pid 1): replay_log_leb: first CS node at LEB 3:0 has wrong commit number 0 expected 1

The issue is that we start replaying the log from UBIFS_LOG_LNUM instead
of c->lhead_lnum. This patch fixes that.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-21 15:25:25 +03:00
Artem Bityutskiy
11e3be0be2 UBIFS: fix crash on error path
This patch fixes a regression introduced by
"4994297 UBIFS: make ubifs_lpt_init clean-up in case of failure" which
I've hit while running the 'integck -p' test. When remount the file-system
from R/O mode to R/W mode and 'lpt_init_wr()' fails, we free _all_ LPT
resources by calling 'ubifs_lpt_free(c, 0)', even those needed for R/O
mode. This leads to subsequent crashes, e.g., if we try to unmount
the file-system.

Cc: stable@vger.kernel.org [v3.5+]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-21 15:25:24 +03:00
Artem Bityutskiy
73e8712aa0 UBIFS: remove stale commentary
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-21 15:25:24 +03:00
Mauro Carvalho Chehab
b4c723e610 [media] saa7164: Add dependency for V4L2 core
As Reported by Randy:

> drivers/built-in.o: In function `fops_open':
> saa7164-encoder.c:(.text+0x68ed6f): undefined reference to `video_devdata'
> drivers/built-in.o: In function `fill_queryctrl.clone.4':
> saa7164-encoder.c:(.text+0x68f657): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-encoder.c:(.text+0x68f6a9): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-encoder.c:(.text+0x68f6e0): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-encoder.c:(.text+0x68f71a): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-encoder.c:(.text+0x68f73a): undefined reference to `v4l2_ctrl_query_fill'
> drivers/built-in.o:saa7164-encoder.c:(.text+0x68f757): more undefined references to `v4l2_ctrl_query_fill' follow
> drivers/built-in.o: In function `saa7164_encoder_register':
> (.text+0x68fff7): undefined reference to `video_device_alloc'
> drivers/built-in.o: In function `saa7164_encoder_register':
> (.text+0x690073): undefined reference to `video_device_release'
> drivers/built-in.o: In function `saa7164_encoder_register':
> (.text+0x6900a1): undefined reference to `__video_register_device'
> drivers/built-in.o: In function `saa7164_encoder_unregister':
> (.text+0x690243): undefined reference to `video_unregister_device'
> drivers/built-in.o: In function `saa7164_encoder_unregister':
> (.text+0x690269): undefined reference to `video_device_release'
> drivers/built-in.o: In function `fops_open':
> saa7164-vbi.c:(.text+0x69125f): undefined reference to `video_devdata'
> drivers/built-in.o: In function `fill_queryctrl.clone.4':
> saa7164-vbi.c:(.text+0x6919b4): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-vbi.c:(.text+0x6919ee): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-vbi.c:(.text+0x691a23): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-vbi.c:(.text+0x691a47): undefined reference to `v4l2_ctrl_query_fill'
> saa7164-vbi.c:(.text+0x691a6a): undefined reference to `v4l2_ctrl_query_fill'
> drivers/built-in.o:saa7164-vbi.c:(.text+0x691a87): more undefined references to `v4l2_ctrl_query_fill' follow
> drivers/built-in.o: In function `saa7164_vbi_register':
> (.text+0x69220e): undefined reference to `video_device_alloc'
> drivers/built-in.o: In function `saa7164_vbi_register':
> (.text+0x69228a): undefined reference to `video_device_release'
> drivers/built-in.o: In function `saa7164_vbi_register':
> (.text+0x6922bb): undefined reference to `__video_register_device'
> drivers/built-in.o: In function `saa7164_vbi_unregister':
> (.text+0x6923de): undefined reference to `video_unregister_device'
> drivers/built-in.o: In function `saa7164_vbi_unregister':
> (.text+0x6923f9): undefined reference to `video_device_release'
> drivers/built-in.o:(.rodata+0xb1054): undefined reference to `video_ioctl2'
> drivers/built-in.o:(.rodata+0xb17d4): undefined reference to `video_ioctl2'

That's due to the lack of an explicit Kconfig dependency for the V4L2 core.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:41:08 -03:00
Mauro Carvalho Chehab
01b0c11a1b [media] Kconfig: Fix b2c2 common code selection
As reported by Randy:

> flexcop-pci.c:(.text+0x19af63): undefined reference to `flexcop_device_exit'
> flexcop-pci.c:(.text+0x19af77): undefined reference to `flexcop_device_kfree'
> flexcop-pci.c:(.text+0x19b10f): undefined reference to `flexcop_pass_dmx_packets'
> flexcop-pci.c:(.text+0x19b182): undefined reference to `flexcop_pass_dmx_data'
> flexcop-pci.c:(.text+0x19b1ae): undefined reference to `flexcop_pass_dmx_data'
> flexcop-pci.c:(.text+0x19b1f8): undefined reference to `flexcop_device_kmalloc'
> flexcop-pci.c:(.text+0x19b256): undefined reference to `flexcop_i2c_request'
> flexcop-pci.c:(.text+0x19b261): undefined reference to `flexcop_eeprom_check_mac_addr'
> flexcop-pci.c:(.text+0x19b2c6): undefined reference to `flexcop_device_initialize'
> flexcop-pci.c:(.text+0x19b332): undefined reference to `flexcop_sram_set_dest'
> flexcop-pci.c:(.text+0x19b348): undefined reference to `flexcop_sram_set_dest'
> flexcop-pci.c:(.text+0x19b3f8): undefined reference to `flexcop_device_exit'
> flexcop-pci.c:(.text+0x19b408): undefined reference to `flexcop_device_kfree'
> flexcop-pci.c:(.text+0x19b4a2): undefined reference to `flexcop_pid_feed_control'
> flexcop-pci.c:(.text+0x19b4d7): undefined reference to `flexcop_pid_feed_control'
>
> since it is possible to enable DVB_B2C2_FLEXCOP_PCI
> when CONFIG_I2C is not enabled, but then DVB_B2C2_FLEXCOP
> is not enabled because I2C is not enabled.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:38:31 -03:00
Hans Verkuil
090836dd81 [media] Fix vino compilation
A trivial fix so that vino can find the saa7191.h header.

[mchehab@redhat.com: Fix merge conflict]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:33:39 -03:00
Axel Lin
52d322582b gpio: bt8xx: Fix build error due to missing include file
This patch fixes below build error:

  CC [M]  drivers/gpio/gpio-bt8xx.o
drivers/gpio/gpio-bt8xx.c:53:40: fatal error: ../media/video/bt8xx/bt848.h: No such file or directory
compilation terminated.
make[2]: *** [drivers/gpio/gpio-bt8xx.o] Error 1
make[1]: *** [drivers/gpio] Error 2
make: *** [drivers] Error 2

drivers/media/video/bt8xx/bt848.h is moved to drivers/media/pci/bt8xx/bt848.h
by commit 68de959f77
"[media] bt8xx: move analog TV part to be together with DTV one".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:21:35 -03:00
Mauro Carvalho Chehab
e9d2f0573e [media] Add missing help for some menuconfig items
Help was missing during some items reorganization. Add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:17:37 -03:00
Mauro Carvalho Chehab
8511f8eaa8 [media] flexcop: Show the item to enable debug after the driver
Instead of showing the option to show debug at the end, show
it after each driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:05:33 -03:00
Mauro Carvalho Chehab
fccea74ff8 [media] Kconfig: merge all customise options into just one
Instead of having 3 options to allow customizing the media
sub-drivers (tuners, I2C drivers, frontends), merge all of
them into just one.

That simplifies the life for users, as they can just keep
this untouched.

Life for developers is also simpler, as there's now just
one Kconfig item to remember, for the ancillary sub-drivers
providing supports for chips that could change from one
board design to another.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:05:06 -03:00
Mauro Carvalho Chehab
fc2bbfb2c3 [media] Kconfig: use menuconfig instead of menu
This allows disabling all drivers of a certain type as a hole

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 08:01:43 -03:00
Mauro Carvalho Chehab
b6334460f2 [media] Cleanup media Kconfig files
- get rid of ridden V4L2_COMMON symbol

  This symbol is not needed anymore; it can be folded with V4L2
  one, simplifying the Kconfig a little bit;

- Comment why some Kconfig items are needed;

- Remove if test for MEDIA_CAMERA_SUPPORT, replacing it by
  depends on.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 07:55:47 -03:00
Mauro Carvalho Chehab
7a46e188bf [media] Put the test devices together
Vivi is not that important to appear at the main menu, so move it
to its own submenu. Also, the mem2mem test device driver is
similar to vivi. So, put both at the same menu.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 07:51:49 -03:00
Mauro Carvalho Chehab
3c8c09b5ed [media] Kconfig reorganization
Reorganize the Kconfig order, for it to be a little more intuitive.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 07:50:55 -03:00
Mauro Carvalho Chehab
b47ff4a3ed [media] move soc_camera to its own directory
That helps to better organize the soc_camera items.

While here, cleanup Makefiles, removing uneeded include dirs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 07:49:12 -03:00
Mauro Carvalho Chehab
7ba2f84159 sh_mobile_csi2: move it to the right place
make[4]: *** No rule to make target `drivers/media/platform/sh_mobile_csi2.c',
	needed by `drivers/media/platform/sh_mobile_csi2.o'.  Stop.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 07:39:30 -03:00
Ingo Molnar
5c65ca7520 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent
Pull syscall tracing fix from Steve Rostedt.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-21 11:49:37 +02:00
Oleg Nesterov
c7a3a88c93 uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails
This patch fixes:

  https://bugzilla.redhat.com/show_bug.cgi?id=843640

If mmap_region()->uprobe_mmap() fails, unmap_and_free_vma path
does unmap_region() but does not remove the soon-to-be-freed vma
from rb tree. Actually there are more problems but this is how
William noticed this bug.

Perhaps we could do do_munmap() + return in this case, but in
fact it is simply wrong to abort if uprobe_mmap() fails. Until
at least we move the !UPROBE_COPY_INSN code from
install_breakpoint() to uprobe_register().

For example, uprobe_mmap()->install_breakpoint() can fail if the
probed insn is not supported (remember, uprobe_register()
succeeds if nobody mmaps inode/offset), mmap() should not fail
in this case.

dup_mmap()->uprobe_mmap() is wrong too by the same reason,
fork() can race with uprobe_register() and fail for no reason if
it wins the race and does install_breakpoint() first.

And, if nothing else, both mmap_region() and dup_mmap() return
success if uprobe_mmap() fails. Change them to ignore the error
code from uprobe_mmap().

Reported-and-tested-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v3.5
Cc: Anton Arapov <anton@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120819171042.GB26957@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-21 11:48:12 +02:00
Ingo Molnar
a0e0fac633 Merge branch 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
Pull ftrace fixlets from Steve Rostedt.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-21 11:36:49 +02:00
Ingo Molnar
bcada3d4b8 perf/core improvements and fixes:
. Fix include order for bison/flex-generated C files, from Ben Hutchings
 
  . Build fixes and documentation corrections from David Ahern
 
  . Group parsing support, from Jiri Olsa
 
  . UI/gtk refactorings and improvements from Namhyung Kim
 
  . NULL deref fix for perf script, from Namhyung Kim
 
  . Assorted cleanups from Robert Richter
 
  . Let O= makes handle relative paths, from Steven Rostedt
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJQMkGhAAoJENZQFvNTUqpAqjsQAJE5iD1LFogC8o/WjvRHz0TY
 Y0x+sR/XfW61KYpeq5g+UaKuFU3P44ijCoyks3y5sza97DkYgUwMpEHlLXFSM8Pp
 sNOapqY57s24nq3MLrhH1V9w+cSE+m2u/Gi5fGLCQekio9gkOBwYxNGk7vpKri/n
 LBRsMozBu/mZjMy20uWOb7Uk8xsAToh+TFaAtjyQ9Snn9nNJj49NUAp37uN888H/
 ducMLq32HN5v/6Zd3q6IWdDWgZsHLkIa3R5FIs/GNe3Dih07gtYLmDol4ktPbTFm
 yoaWpP5wbtu/62EZlJwE393vMuoeqN/96394ZZQGFafhHVxN4+rcBhXbejBs0T2b
 wk/0CzntW8bbUAI/cl3SB9aui//FWOxcjG9aDQ7PsmHzPw1Q4VD0F9Mcod4p+dRX
 PsA9q/tST1eAiwzWYthDtj81U7iChINcXKhoZn2xn6+0+aMH+6FFNBmCH8MR5aCU
 BvrXhTJjvau/Ym/sILl4Tf4wfssTq49yMsn/YKCwLJ0hg0XlTObWfQRy2MOayXH9
 NJvUE+9GSXoTEKhmr1AfTYEG9vObaXZyFwAI74xvPPwUYojCb4ZjEKmG0egW+VGk
 IJKFCaJZwwVsGau4aIbFAMP12/L8Qs/Ox91ddCJ0j5TIlSGMaqW5lbV1N1crzlTT
 a0GsN49NvhbFttBXrcNX
 =0a2X
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Fix include order for bison/flex-generated C files, from Ben Hutchings

 * Build fixes and documentation corrections from David Ahern

 * Group parsing support, from Jiri Olsa

 * UI/gtk refactorings and improvements from Namhyung Kim

 * NULL deref fix for perf script, from Namhyung Kim

 * Assorted cleanups from Robert Richter

 * Let O= makes handle relative paths, from Steven Rostedt

 * perf script python fixes, from Feng Tang.

 * Improve 'perf lock' error message when the needed tracepoints
   are not present, from David Ahern.

 * Initial bash completion support, from Frederic Weisbecker

 * Allow building without libelf, from Namhyung Kim.

 * Support DWARF CFI based unwind to have callchains when %bp
   based unwinding is not possible, from Jiri Olsa.

 * Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
   section was the end goal, several fixes for code that handles all
   architectures and cleanups are included, from Cody Schafer.

 * Add a description for the JIT interface, from Andi Kleen.

 * Assorted fixes for Documentation and build in 32 bit, from Robert Richter

 * Add support for non-tracepoint events in perf script python, from Feng Tang

 * Cache the libtraceevent event_format associated to each evsel early, so that we
   avoid relookups, i.e. calling pevent_find_event repeatedly when processing
   tracepoint events.

   [ This is to reduce the surface contact with libtraceevents and make clear what
     is that the perf tools needs from that lib: so far parsing the common and per
     event fields. ]

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-21 11:27:00 +02:00
Ingo Molnar
26198c21d1 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
Pull ftrace updates from Steve Rostedt:

" This patch series extends ftrace function tracing utility to be
  more dynamic for its users. It allows for data passing to the callback
  functions, as well as reading regs as if a breakpoint were to trigger
  at function entry.

  The main goal of this patch series was to allow kprobes to use ftrace
  as an optimized probe point when a probe is placed on an ftrace nop.
  With lots of help from Masami Hiramatsu, and going through lots of
  iterations, we finally came up with a good solution. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-21 11:23:40 +02:00
Jesse Brandeburg
8376dad0c8 igb: update to allow reading/setting MDI state
This is the implementation for igb to allow forcing MDI state
via ethtool, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21 01:27:48 -07:00
Jesse Brandeburg
4e8186b68f e1000e: implement MDI/MDI-X control
Some users report issues with link failing when connected to certain
switches.  This gives the user the ability to control the MDI state
from the driver, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.

This is in regards to the related ethtool app patch and
bugzilla.kernel.org bug 11998

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: bruce.w.allan@intel.com
CC: n.poppelier@xs4all.nl
CC: bastien@durel.org
CC: jsveiga@it.eng.br
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21 01:26:45 -07:00
Jesse Brandeburg
c819bbd5ec e1000: configure and read MDI settings
This is the implementation in e1000 to allow ethtool to force
MDI state, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is enabled.

To use must have the matching version of ethtool app that supports
this functionality.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21 01:25:34 -07:00
Jesse Brandeburg
1b556783ab igb: implement 580 MDI setting support
In order for igb to support MDI setting support via
ethtool this code is needed to allow setting the MDI state
via software.

This is in regards to the related ethtool patch

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21 01:24:05 -07:00
Bruce W Allan
e86fd89188 e1000e: implement 82577/579 MDI setting support
In order for e1000e to support MDI setting support via
ethtool this code is needed to allow setting the MDI state
via software.

This is in regards to the related ethtool patch and
fixes bugzilla.kernel.org bug 11998

Signed-off-by: Bruce W Allan <bruce.w.allan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21 01:22:56 -07:00
Jesse Brandeburg
6f6bbc186d ethtool.h: MDI setting support
This change modifies the core ethtool struct to allow a driver to
support setting of MDI/MDI-X state for twisted pair wiring.  This
change uses a previously reserved u8 and should not change any
binary compatibility of ethtool.

Also as per Ben Hutchings' suggestion, the capabilities are
stored in a separate byte so the driver can report if it supports
changing settings.

see thread: http://kerneltrap.org/mailarchive/linux-netdev/2010/11/17/6289820/thread

see ethtool patches titled:
ethtool: allow setting MDI-X state

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21 01:19:54 -07:00
Ondrej Zary
f993348746 ALSA: introduce snd-cmi8328: C-Media CMI8328 driver
Introduce snd-cmi8328 driver for C-Media CMI8328-based sound cards, such as
AudioExcel AV500.

It supports PCM playback and capture (full-duplex) through wss_lib, gameport,
OPL3 and MPU401. The AV500 card has onboard Dream wavetable synth connected
to the MPU401 port and Aux 1 input internally which works too.
The CDROM interface is not supported (as the drivers for these CDROMs were
removed from the kernel some time ago).

A separate driver is needed because CMI8328 is completely different chip to
CMI8329/CMI8330. It's configured by magic registers (there's no PnP). Sound is
provided by a real WSS codec (CS4231A) and the SB part is just a SB Pro
emulation (for DOS games, useless for Linux).

When SB is enabled, the CMI8328 chip disables access to the WSS codec,
emulates SoundBlaster on one side and outputs sound data to the codec - so SB
and WSS can't work together with this card. The WSS codec can do full duplex
by itself so there's no need for crazy things like snd-cmi8330 does
(combining SB and WSS parts into one driver).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-21 07:30:46 +02:00
Ondrej Zary
53e1719f3d ALSA: snd-als100: fix suspend/resume
snd_card_als100_probe() does not set pcm field in struct snd_sb.
As a result, PCM is not suspended and applications don't know that they need
to resume the playback.

Tested with Labway A381-F20 card (ALS120).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-21 07:29:40 +02:00
Linus Torvalds
9160338de9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
 "Here are two patches from Rafael Wysocki.

  One fixes an EHCI-related hibernation crash on ASUS boxes.  We fixed a
  similar suspend issue in v3.6-rc1, and this applies the same fix to
  the hibernate path.

  The other fixes D3/D3cold/D4 messages related to the D3cold support we
  merged in v3.6-rc1."

(Removed redundant top non-fast-forward merge commit from pulled branch)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: EHCI: Fix crash during hibernation on ASUS computers
  PCI / PM: Fix D3/D3cold/D4 messages printed by acpi_pci_set_power_state()
2012-08-20 16:42:41 -07:00
Bryan Schumaker
24ff99c6fe NFSD: Swap the struct nfs4_operation getter and setter
stateid_setter should be matched to op_set_currentstateid, rather than
op_get_currentstateid.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-08-20 18:53:25 -04:00
J. Bruce Fields
95c7a20aeb nfsd: do_nfsd_create verf argument is a u32
The types here are actually a bit of a mess.  For now cast as we do in
the v4 case.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-08-20 18:39:49 -04:00
J. Bruce Fields
87f26f9b08 nfsd4: declare nfs4_recoverydir properly
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-08-20 18:39:49 -04:00