- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
Changes
-------
* 32bit s390 support
* opendir() and friends
* openat() support
* sscanf() support
* various cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCZ8w24QAKCRDB+h1jyw5b
OIRTAQD1KvUV0qYOKU3xqOiUxDe84DyFv4mgu1iZoqmd0po/CQEAs8HU4XWp4Ls0
tPkcLqlhiVPgwhtipjklW8uy6JcFzAI=
=+Zma
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250308-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- 32bit s390 support
- opendir() and friends
- openat() support
- sscanf() support
- various cleanups
[ Paul has just forwarded the pull request from Thomas Weißschuh, so
the tag signature is from Thomas, not Paul - Linus ]
* tag 'nolibc-20250308-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (26 commits)
tools/nolibc: don't use asm/ UAPI headers
selftests/nolibc: stop testing constructor order
selftests/nolibc: use O_RDONLY flag instead of 0
tools/nolibc: drop outdated example from overview comment
tools/nolibc: process open() vararg as mode_t
tools/nolibc: always use openat(2) instead of open(2)
tools/nolibc: add support for openat(2)
selftests/nolibc: add armthumb configuration
selftests/nolibc: explicitly enable ARM mode
Revert "selftests: kselftest: Fix build failure with NOLIBC"
tools/nolibc: add support for [v]sscanf()
tools/nolibc: add support for 32-bit s390
selftests/nolibc: rename s390 to s390x
selftests/nolibc: only run constructor tests on nolibc
selftests/nolibc: split up architecture list in run-tests.sh
tools/nolibc: add support for directory access
tools/nolibc: add support for sys_llseek()
selftests/nolibc: always keep test kernel configuration up to date
selftests/nolibc: execute defconfig before other targets
selftests/nolibc: drop call to mrproper target
...
This also fixes a wrong definitions for SCM_TS_OPT_ID & SO_RCVPRIORITY.
Accidentally found while working on another patchset.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: a89568e9be ("selftests: txtimestamp: add SCM_TS_OPT_ID test")
Fixes: e45469e594 ("sock: Introduce SO_RCVPRIORITY socket option")
Link: https://lore.kernel.org/netdev/20250314195257.34854-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250314214155.16046-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The asm/ and asm-generic/ namespaces are implementation details of the UAPI
headers and not meant for direct usage.
Use the equivalent headers from the linux/ namespace instead.
While at it also drop the duplicate include of linux/signal.h from sys.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250307-nolibc-asm-headers-v2-1-e2a734f25d22@linutronix.de
openat is useful to avoid needing to construct relative paths, so expose
a wrapper for using it directly.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-1-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
"int" was misspelled as "init" the code comments in the bits.h and
const.h files. Fix the typo.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
limits.h is a widely used standard header. Missing it from nolibc requires
adoption effort to port applications.
Add a shim header which includes the global nolibc.h header.
It makes all nolibc symbols available.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-9-28e14e031ed8@linutronix.de
It will be used by the vDSO selftests.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-7-28e14e031ed8@linutronix.de
These functions are used often, also in selftests.
sscanf() itself is also used by kselftest.h itself.
The implementation is limited and only supports numeric arguments.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-1-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
32-bit s390 is very close to the existing 64-bit implementation.
Some special handling is necessary as there is neither LLVM nor
QEMU support. Also the kernel itself can not build natively for 32-bit
s390, so instead the test program is executed with a 64-bit kernel.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-2-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add an implementation for directory access operations.
To keep nolibc itself allocation-free, a "DIR *" does not point to any
data, but directly encodes a filedescriptor number, equivalent to "FILE *".
Without any per-directory storage it is not possible to implement
readdir() POSIX confirming. Instead only readdir_r() is provided.
While readdir_r() is deprecated in glibc, the reasons for that are
not applicable to nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250209-nolibc-dir-v2-2-57cc1da8558b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Not all architectures have the old sys_lseek(), notably riscv32.
Implement lseek() in terms of sys_llseek() in that case.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250209-nolibc-dir-v2-1-57cc1da8558b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
POSIX defines the signature of ioctl() as follows,
to allow passing a pointer or integer without casting:
int ioctl(int fildes, int request, ... /* arg */);
Nolibc ioctl() expects a pointer, forcing the user to manually cast.
Using va_arg to make the signature more flexible would work but seems to
prevent inlining of the function. Instead use a macro. "fd" and "req"
will still be typechecked through sys_ioctl().
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
With -Wmissing-prototypes the compiler will warn about non-static
functions which don't have a prototype defined.
This warning doesn't make much sense for nolibc itself but for user code
it is still useful.
To pacify the compiler add prototypes next to the function definitions,
similar to how it is handled elsewhere in the kernel.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-prototype-v1-1-e1afc5c1999a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
* New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
* Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the
way for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmeYqJcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLUhCACxUTMVQXhfW3qbh0UQxPd7XXvjI+Hm7SPS
wDuVTle4jrFVGHxuZqtgWLmx8hD7bqO965qmFgbevKlwsRY33onH2nbH4i4AcwbA
jcdM4yMHZI4+Qmnb4G5ZJ89IwjAhHPZTBOV5KRhyHQ/qtRciHHtOgJde7II9fd68
uIESg4SSSyUzI47YSEHmGVmiBIhdQhq2qust0m6NPFalEGYstPbpluPQ6R1CsDqK
v14TIAW7t0vSPucBeODxhA5gEa2JsvNi+sqA+DF/ELH2ZqpkuR7rofgMGblaXCSD
JXa5xamRB9dI5zi8vatwfOzYlog+/gzmPqMh/9JXpiDGHxJe0vlz
=tQ8F
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
-----BEGIN PGP SIGNATURE-----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=f2CA
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
- adds support for waitid()
- uses waitid() over waitpid()
- uses a pipe to in vfprintf tests
- skips tests for unimplemented syscalls
- renames riscv to riscv64
- adds configurations for riscv32
- adds detecting missing toolchain to run-tests.sh
-----BEGIN PGP SIGNATURE-----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=jwYX
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-nolibc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
- add support for waitid()
- use waitid() over waitpid()
- use a pipe in vfprintf tests
- skip tests for unimplemented syscalls
- rename riscv to riscv64
- add configurations for riscv32
- add detecting missing toolchain to run-tests.sh
* tag 'linux_kselftest-nolibc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/nolibc: add configurations for riscv32
selftests/nolibc: rename riscv to riscv64
selftests/nolibc: skip tests for unimplemented syscalls
selftests/nolibc: use a pipe to in vfprintf tests
selftests/nolibc: use waitid() over waitpid()
tools/nolibc: add support for waitid()
selftests/nolibc: run-tests.sh: detect missing toolchain
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
Sync if_xdp.h uapi header to remove following warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'
Fixes: 48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250115032248.125742-1-yoong.siang.song@intel.com
waitid() is the modern variant of the family of wait-like syscalls.
Some architectures have dropped support for wait(), wait4() and waitpid()
but all of them support waitid().
It is more flexible and easier to use than the older ones.
Link: https://lore.kernel.org/r/20241221-nolibc-rv32-v1-1-d9ef6dab7c63@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Created with the following:
cp include/linux/kasan-tags.h tools/include/linux/
cp arch/arm64/include/asm/sysreg.h tools/arch/arm64/include/asm/
Update the tools copy of sysreg.h so that the next commit to add a new
register doesn't have unrelated changes in it. Because the new version
of sysreg.h includes kasan-tags.h, that file also now needs to be copied
into tools.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-3-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ30g5RUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIMfSwD5AceGwL4lOliAKuD+jt5FGBbR4Wag
HBn/16BGwMwfxMEBAP1UoXeo4gs6AawT+JcvZjwfNlXwdAiyAx9zY4MtvxoL
=TcTF
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the user to configure needed_{head,tail}room for both netkit
devices. The idea is similar to 163e529200 ("veth: implement
ndo_set_rx_headroom") with the difference that the two parameters
can be specified upon device creation. By default the current behavior
stays as is which is needed_{head,tail}room is 0.
In case of Cilium, for example, the netkit devices are not enslaved
into a bridge or openvswitch device (rather, BPF-based redirection
is used out of tcx), and as such these parameters are not propagated
into the Pod's netns via peer device.
Given Cilium can run in vxlan/geneve tunneling mode (needed_headroom)
and/or be used in combination with WireGuard (needed_{head,tail}room),
allow the Cilium CNI plugin to specify these two upon netkit device
creation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/bpf/20241220234658.490686-1-daniel@iogearbox.net
For the most part of the C++ history, it couldn't have type
declarations inside anonymous unions for different reasons. At the
same time, __struct_group() relies on the latters, so when the @TAG
argument is not empty, C++ code doesn't want to build (even under
`extern "C"`):
../linux/include/uapi/linux/pkt_cls.h:25:24: error:
'struct tc_u32_sel::<unnamed union>::tc_u32_sel_hdr,' invalid;
an anonymous union may only have public non-static data members
[-fpermissive]
The safest way to fix this without trying to switch standards (which
is impossible in UAPI anyway) etc., is to disable tag declaration
for that language. This won't break anything since for now it's not
buildable at all.
Use a separate definition for __struct_group() when __cplusplus is
defined to mitigate the error, including the version from tools/.
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Reported-by: Christopher Ferris <cferris@google.com>
Closes: https://lore.kernel.org/linux-hardening/Z1HZpe3WE5As8UAz@google.com
Suggested-by: Kees Cook <kees@kernel.org> # __struct_group_tag()
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20241219135734.2130002-1-aleksander.lobakin@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fd_array attribute of the BPF_PROG_LOAD syscall may contain a set
of file descriptors: maps or btfs. This field was introduced as a
sparse array. Introduce a new attribute, fd_array_cnt, which, if
present, indicates that the fd_array is a continuous array of the
corresponding length.
If fd_array_cnt is non-zero, then every map in the fd_array will be
bound to the program, as if it was used by the program. This
functionality is similar to the BPF_PROG_BIND_MAP syscall, but such
maps can be used by the verifier during the program load.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241213130934.1087929-5-aspsk@isovalent.com
This patch introduces a new probe to check whether the kernel supports
instruction set extensions v4. The v4 extension comprises several new
instructions: BPF_{SDIV,SMOD} (signed div and mod), BPF_{LD,LDX,ST,STX,MOV}
(sign-extended load/store/move), 32-bit BPF_JA (unconditional jump),
target-independent BPF_ALU64 BSWAP (byte-swapping 16/32/64).
These have been introduced in the following commits respectively:
* ec0e2da95f ("bpf: Support new signed div/mod instructions.")
* 1f9a1ea821 ("bpf: Support new sign-extension load insns")
* 8100928c88 ("bpf: Support new sign-extension mov insns")
* 4cd58e9af8 ("bpf: Support new 32bit offset jmp instruction")
* 0845c3db7b ("bpf: Support new unconditional bswap instruction")
Support in bpftool for previous ISA extensions was added in commit
0fd800b245 ("bpftool: Probe for instruction set extensions"). These
probes are useful for userspace BPF projects that want to use newer
instruction set extensions on newer kernels, to reduce the programs'
sizes or their complexity.
LLVM provides the mcpu=v4 option since LLVM commit 8f28e8069c4b ("[BPF]
support for BPF_ST instruction in codegen") [0].
Signed-off-by: Simone Magnani <simone.magnani@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: 8f28e8069c [0]
Link: https://lore.kernel.org/bpf/20241209145439.336362-1-simone.magnani@isovalent.com
To pick up the changes in this cset:
3630e82ab6 ("mman: Add map_shadow_stack() flags")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/mman.h include/uapi/asm-generic/mman.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
6140be90ec ("fs/xattr: add *at family syscalls")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
The arm64 changes are not included as it requires more changes in the
tools. It'll be worked for the later cycle.
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-mips@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20241203035349.1901262-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
e785dfacf7 ("LoongArch: KVM: Add PCHPIC device support")
2e8b9df826 ("LoongArch: KVM: Add EIOINTC device support")
c532de5a67 ("LoongArch: KVM: Add IPI device support")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: kvm@vger.kernel.org
Cc: loongarch@lists.linux.dev
Link: https://lore.kernel.org/r/20241203035349.1901262-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
18d92bb57c ("perf/core: Add aux_pause, aux_resume, aux_start_paused")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241203035349.1901262-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up the changes in this cset:
56c594d8df ("drm: add DRM_SET_CLIENT_NAME ioctl")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Please see tools/include/uapi/README for further details.
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241203035349.1901262-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
performs some cleanups in the resource management code.
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of task_struct.comm[].
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest.
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code.
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification.
- The series "add detect count for hung tasks" from Lance Yang adds more
userspace visibility into the hung-task detector's activity.
- Apart from that, singelton patches in many places - please see the
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ0L6lQAKCRDdBJ7gKXxA
jmEIAPwMSglNPKRIOgzOvHh8MUJW1Dy8iKJ2kWCO3f6QTUIM2AEA+PazZbUd/g2m
Ii8igH0UBibIgva7MrCyJedDI1O23AA=
=8BIU
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
