Commit graph

3,008 commits

Author SHA1 Message Date
Bjorn Helgaas
87edaec536 Merge branch 'pci/controller/dwc-intel-gw'
- Enable clock before PHY init for correct ordering (Florian Eckert)

- Add .start_link() callback so the driver works again (Florian Eckert)

- Stop overwriting the ATU base address discovered by
  dw_pcie_get_resources() (Florian Eckert)

- Add DT 'atu' region since this is hardware-specific, and fall back to
  driver default if lacking (Florian Eckert)

* pci/controller/dwc-intel-gw:
  dt-bindings: PCI: intel,lgm-pcie: Add 'atu' resource
  PCI: intel-gw: Fix ATU base address setup and add optional DT 'atu' region
  PCI: intel-gw: Add .start_link() callback
  PCI: intel-gw: Enable clock before PHY init
  PCI: intel-gw: Move interrupt enable to own function
  PCI: intel-gw: Remove unused PCIE_APP_INTX_OFST definition
2026-06-23 17:32:07 -05:00
Bjorn Helgaas
878f37d6de Merge branch 'pci/controller/dwc-imx6'
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
  functions (Richard Zhu)

- Add pci_host_common_parse_ports() for use by any native driver to parse
  Root Port properties (currently only reset GPIOs) (Sherry Sun)

- Assert PERST# before enabling regulators to ensure that even if power is
  enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun)

- Parse reset properties in Root Port nodes (falling back to host bridge)
  to help support Key E connectors and the pwrctrl framework (Sherry Sun)

- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)

- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu)

- Integrate new pwrctrl API for DTs with Root Port-level power supplies
  (Sherry Sun)

* pci/controller/dwc-imx6:
  PCI: imx6: Integrate new pwrctrl API
  PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
  PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
  PCI: imx6: Parse 'reset-gpios' in Root Port nodes
  PCI: imx6: Assert PERST# before enabling regulators
  PCI: host-generic: Add common helpers for parsing Root Port properties
  dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node
  PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
2026-06-23 17:32:06 -05:00
Bjorn Helgaas
1d0f97d5f8 Merge branch 'pci/controller/dwc-amd-mdb'
- Assert PERST# on shutdown so any connected Endpoints are held in reset
  during shutdown (Sai Krishna Musham)

* pci/controller/dwc-amd-mdb:
  PCI: amd-mdb: Assert PERST# on shutdown
2026-06-23 17:32:06 -05:00
Bjorn Helgaas
bcb446d61d Merge branch 'pci/controller/dwc'
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to 5.10a,
  not just 4.90a and 5.00a (Manikanta Maddireddy)

- Use common struct dw_pcie 'mode' rather than duplicating it in artpec6,
  dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)

- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce boilerplate
  and fix a seq_file memory leak by including a .release() callback (Hans
  Zhang)

- Fix a signedness bug in fault injection test code (Dan Carpenter)

- Avoid NULL pointer dereference when tearing down debugfs for controller
  that lacks RAS DES capability (Shuvam Pandey)

* pci/controller/dwc:
  PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability
  PCI: dwc: Fix signedness bug in fault injection test code
  PCI: dwc: Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs
  PCI: keembay: Use common mode field in struct dw_pcie
  PCI: dwc: Use common mode field in struct dw_pcie
  PCI: artpec6: Use common mode field in struct dw_pcie
  PCI: dra7xx: Use common mode field in struct dw_pcie
  PCI: dwc: Apply ECRC workaround for DesignWare cores prior to 5.10a
2026-06-23 17:32:05 -05:00
Bjorn Helgaas
bf27eed040 Merge branch 'pci/controller/altera'
- Do not dispose of the parent IRQ mapping, which belongs to the parent
  interrupt controller (Mahesh Vaidya)

- Fix chained IRQ handler ordering issue and resource leaks on probe
  failure (Mahesh Vaidya)

* pci/controller/altera:
  PCI: altera: Fix resource leaks on probe failure
  PCI: altera: Do not dispose parent IRQ mapping
2026-06-23 17:32:05 -05:00
Bjorn Helgaas
34de291028 Merge branch 'pci/controller/host-common'
- Request bus reassignment when not probe-only to fix an enumeration
  regression on Marvell CN106XX and possibly other DT-based systems
  (Ratheesh Kannoth)

* pci/controller/host-common:
  PCI: host-common: Request bus reassignment when not probe-only
2026-06-23 17:32:05 -05:00
Bjorn Helgaas
ae385ca812 Merge branch 'pci/endpoint'
- Add endpoint controller APIs for use by function drivers to discover
  auxiliary blocks like DMA engines (Koichiro Den)

- Remember DesignWare eDMA engine base/size and expose them via the EPC
  aux-resource API (Koichiro Den)

- Refactor endpoint doorbell allocation to allow non-MSI doorbells
  (Koichiro Den)

- Add endpoint embedded doorbell fallback, used if MSI allocation fails
  (Koichiro Den)

- Validate BAR index and remove dead BAR read in endpoint doorbell test
  (Carlos Bilbao)

- Unwind MSI/MSI-X vectors if NTB initialization fails part-way through
  (Koichiro Den)

- Cache sleepable pci_irq_vector() value at ISR setup to avoid calling it
  from hardirq context (Koichiro Den)

- Validate doorbell count when configuring NTB and vNTB doorbells
  (Manivannan Sadhasivam)

- Call sleepable pci_epc_raise_irq() from a work item instead of atomic
  context, e.g., when setting bits in NTB peer doorbells in the
  ntb_peer_db_set() path (Koichiro Den)

- Report 0-based vNTB doorbell vector to account for link event 0 and
  historically skipped slot 1 (Koichiro Den)

- Reject unusable vNTB doorbell counts, e.g., if they don't allow space for
  link event 0 and historically skipped slot 1 (Koichiro Den)

- Prevent configfs writes to vNTB db_count and other values that are
  already in use after EPC attach (Koichiro Den)

- Account for vNTB db_valid reserved slots (link event 0 and historically
  skipped slot 1) so they don't appear as valid doorbells (Koichiro Den)

- Implement vNTB .db_vector_count()/mask() for doorbells so clients can use
  multiple vectors and avoid thundering herds (Koichiro Den)

- Report 0-based NTB doorbell vector to account for link event 0 and
  historically skipped slot 1 (Koichiro Den)

- Fix doorbell bitmask and IRQ vector handling to clear only specified
  bits, use the correct vector for non-contiguous Linux IRQ numbers, and
  validate incoming vectors (Koichiro Den)

- Implement NTB .db_vector_count()/mask() for doorbells so clients can use
  multiple vectors (Koichiro Den)

* pci/endpoint:
  NTB: epf: Implement .db_vector_count()/mask() for doorbells
  NTB: epf: Fix doorbell bitmask and IRQ vector handling
  NTB: epf: Report 0-based doorbell vector via ntb_db_event()
  NTB: epf: Make db_valid_mask cover only real doorbell bits
  NTB: epf: Document legacy doorbell slot offset in ntb_epf_peer_db_set()
  PCI: endpoint: pci-epf-vntb: Implement .db_vector_count()/mask() for doorbells
  PCI: endpoint: pci-epf-vntb: Exclude reserved slots from db_valid_mask
  PCI: endpoint: pci-epf-vntb: Guard configfs writes after EPC attach
  PCI: endpoint: pci-epf-vntb: Reject unusable doorbell counts
  PCI: endpoint: pci-epf-vntb: Report 0-based doorbell vector via ntb_db_event()
  PCI: endpoint: pci-epf-vntb: Defer pci_epc_raise_irq() out of atomic context
  PCI: endpoint: pci-epf-vntb: Document legacy MSI doorbell offset
  PCI: endpoint: pci-epf-ntb: Add check to detect 'db_count' value of 0
  PCI: endpoint: pci-epf-vntb: Add check to detect 'db_count' value of 0
  NTB: epf: Avoid calling pci_irq_vector() from hardirq context
  NTB: epf: Fix request_irq() unwind in ntb_epf_init_isr()
  misc: pci_endpoint_test: Remove dead BAR read before doorbell trigger
  misc: pci_endpoint_test: Validate BAR index in doorbell test
  PCI: endpoint: pci-ep-msi: Add embedded doorbell fallback
  PCI: endpoint: pci-epf-test: Reuse pre-exposed doorbell targets
  PCI: endpoint: pci-epf-vntb: Reuse pre-exposed doorbells and IRQ flags
  PCI: endpoint: pci-ep-msi: Refactor doorbell allocation for new backends
  PCI: dwc: ep: Expose integrated eDMA resources via EPC aux-resource API
  PCI: dwc: Record integrated eDMA register window
  PCI: endpoint: Add auxiliary resource query API
2026-06-23 17:32:04 -05:00
Ratheesh Kannoth
fda8749ba7 PCI: host-common: Request bus reassignment when not probe-only
pci_host_common_init() is used by several generic ECAM host drivers.
After PCI core changes around pci_flags and preserve_config, these hosts
no longer opted into full bus number reassignment the way they did
before, which broke enumeration of devices on a Marvell CN106XX board.

When PCI_PROBE_ONLY is not set, add PCI_REASSIGN_ALL_BUS so
pci_scan_bridge_extend() takes the reassignment path: bus numbers can be
assigned from firmware EA data (e.g. pci_ea_fixed_busnrs()). Skip the
flag in probe-only mode so existing assignments are not overridden.

Fixes: 7246a4520b ("PCI: Use preserve_config in place of pci_flags")
Closes: https://lore.kernel.org/all/abkqm_LCd9zAM8cW@rkannoth-OptiPlex-7090/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add problem report link]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260414081730.3864372-1-rkannoth@marvell.com
2026-06-18 12:13:14 -05:00
Shuvam Pandey
26b67fa10e PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability
dwc_pcie_rasdes_debugfs_init() returns success when the controller has no
RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common
debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which
dereferences rasdes_info unconditionally.

Return early when no RAS DES state was allocated. In that case no RAS DES
mutex was initialized, so there is nothing to destroy.

Fixes: 4fbfa17f9a ("PCI: dwc: Add debugfs based Silicon Debug support for DWC")
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
[mani: reworded subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/0f97352506d8d813f70f441de4d63fcd5b7d1c3e.1779123847.git.shuvampandey1@gmail.com
2026-06-11 17:05:08 -05:00
Sherry Sun
85c1fcfa74 PCI: imx6: Integrate new pwrctrl API
Integrate the PCI pwrctrl framework into the pci-imx6 driver to provide
standardized power management for PCI devices.

Legacy regulator handling (vpcie-supply at controller level) is maintained
for backward compatibility with existing device trees. New device trees
should specify power supplies at the Root Port level to utilize the pwrctrl
framework.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260520084904.2424253-2-sherry.sun@oss.nxp.com
2026-06-10 19:11:15 +05:30
Richard Zhu
9dda3f83ba PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
According to the PHY Databook Common Block Signals section, the
ref_clk_en signal must remain de-asserted until the reference clock is
running at the appropriate frequency. Once the clock is stable,
ref_clk_en can be asserted. For lower power states where the reference
clock to the PHY is disabled, ref_clk_en should also be de-asserted.

Move the ref_clk_en bit manipulation into imx95_pcie_enable_ref_clk()
to ensure the reference clock stabilizes before ref_clk_en is asserted
and before the PHY reset is de-asserted. This aligns with the timing
requirements specified in the PHY documentation.

Fixes: d8574ce57d ("PCI: imx6: Add external reference clock input mode support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260518072715.3166514-3-hongxing.zhu@nxp.com
2026-06-09 21:15:30 +05:30
Richard Zhu
0c26b1c34d PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
According to the i.MX95 PCIe PHY Databook, the ref_use_pad signal in the
Common Block Signals section selects the reference clock source connected
to the PHY pads. Per the specification, any change to this input must be
followed by a PHY reset assertion to take effect.

Move the REF_USE_PAD configuration before the PHY reset toggle to comply
with the required initialization sequence.

Fixes: 47f54a902d ("PCI: imx6: Toggle the core reset for i.MX95 PCIe")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: renamed the callback and helper to match the usecase]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260518072715.3166514-2-hongxing.zhu@nxp.com
2026-06-09 21:14:56 +05:30
Manivannan Sadhasivam
ced835ae1f PCI: qcom: Indicate broken L1SS exit during resume from system suspend
Qcom PCIe RCs can successfully exit from L1SS during OS runtime. However,
during system suspend, the Qcom PCIe RC driver may remove all resource
votes and turn off the PHY to maximize power savings.

Consequently, when the host is in system suspend with the link in L1SS and
the endpoint asserts CLKREQ#, the RC driver must restore the PHY and enable
the REFCLK. This recovery process causes the L1SS exit latency time to be
exceeded (roughly L10_REFCLK_ON + T_COMMONMODE). If the RC driver were to
retain all votes during suspend, L1SS exit would succeed without issue but
at the expense of higher power consumption.

When the host fails to move the link from L1SS to L0 within the
L10_REFCLK_ON + T_COMMONMODE time, the endpoint may treat it as a fatal
condition and trigger Link Down (LDn) during resume. This LDn results in a
reset that destroys the internal device state.

To ensure that the client drivers can properly handle this scenario, let
them know about this platform limitation by setting the
'pci_host_bridge::broken_l1ss_resume' flag.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-3-b2c3a4bdeb15@oss.qualcomm.com
2026-05-23 06:54:01 -05:00
Dan Carpenter
94ac934d2c PCI: dwc: Fix signedness bug in fault injection test code
The kstrtou32() function returns negative error code or zero on success.
However, in this case "val" is a u32 and the function returns signed long,
so negative error codes from kstrtou32() are returned as high positive
values.

Store the error code in an int instead.

Fixes: d20ee8e2db ("PCI: dwc: Add debugfs based Error Injection support for DWC")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/agL-Uwfn26SI4Gb0@stanley.mountain
2026-05-19 19:49:57 +05:30
Hans Zhang
d25f1dd6b9 PCI: dwc: Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs
Replace the custom open function and file_operations with the standard
DEFINE_SHOW_ATTRIBUTE macro to reduce boilerplate code.

This also adds the previously missing .release() callback and fixes the
seq_file leak during close.

Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: added a note about implicit release callback change spotted by Sashiko]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260508133432.1964491-1-18255117159@163.com
2026-05-19 19:00:40 +05:30
Sherry Sun
250eea5c06 PCI: imx6: Parse 'reset-gpios' in Root Port nodes
The current DT binding for pci-imx6 specifies the 'reset-gpios' property
in the host bridge node. However, the PERST# signal logically belongs to
individual Root Ports rather than the host bridge itself. This becomes
important when supporting PCIe Key E connector and the PCI power control
framework for pci-imx6 driver, which requires properties to be specified
in Root Port nodes.

Parse 'reset-gpios' from Root Port nodes and the PCIe bridge nodes under
the Root Port using the common helper pci_host_common_parse_ports(), and
update the reset GPIO handling to use the parsed port list from
bridge->ports. To maintain DT backwards compatibility, fall back to the
legacy method of parsing the host bridge node if the reset property is not
present in the Root Port nodes.

Since now the reset GPIO is obtained with GPIOD_ASIS flag, it may be in
input mode, so use gpiod_direction_output() instead of
gpiod_set_value_cansleep() to ensure the reset GPIO is properly
configured as output before setting its value.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260422093549.407022-5-sherry.sun@nxp.com
2026-05-18 18:05:27 -05:00
Sherry Sun
610fa91d98 PCI: imx6: Assert PERST# before enabling regulators
The PCIe endpoint may start responding or driving signals as soon as its
supply is enabled, even before the reference clock is stable.  Asserting
PERST# before enabling the regulator ensures that the endpoint remains in
reset throughout the entire power-up sequence, until both power and refclk
are known to be stable and link initialization can safely begin.

Currently, the driver enables the vpcie3v3aux regulator in imx_pcie_probe()
before PERST# is asserted in imx_pcie_host_init(), which may cause PCIe
endpoint undefined behavior during early power-up. However, there is no
issue so far because PERST# is requested as GPIOD_OUT_HIGH in
imx_pcie_probe(), which guarantees that PERST# is asserted before enabling
the vpcie3v3aux regulator.

This prepares for an upcoming changes that will parse the reset property
using the new Root Port binding, which will use GPIOD_ASIS when requesting
the reset GPIO. With GPIOD_ASIS, the GPIO state is not guaranteed, so
explicit sequencing is required.

Fix the power sequencing by:

  1. Moving vpcie3v3aux regulator enable from probe to
     imx_pcie_host_init(), where it can be properly sequenced with PERST#.

  2. Moving imx_pcie_assert_perst() before regulator and clock enable to
     ensure correct ordering.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260422093549.407022-4-sherry.sun@nxp.com
2026-05-18 18:03:55 -05:00
Sherry Sun
b269bb5e4c PCI: host-generic: Add common helpers for parsing Root Port properties
Introduce generic helper functions to parse Root Port device tree nodes and
extract common properties like reset GPIOs. This allows multiple PCI host
controller drivers to share the same parsing logic.

Define struct pci_host_port to hold common Root Port properties (currently
only list of PERST# GPIO descriptors) and add pci_host_common_parse_ports()
to parse Root Port nodes from device tree.

Also add the 'ports' list to struct pci_host_bridge to better maintain
parsed Root Port information.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260422093549.407022-3-sherry.sun@nxp.com
2026-05-18 18:01:06 -05:00
Richard Zhu
aad953fb4e PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
The IMX6SX_GPR12_PCIE_TEST_POWERDOWN bit does not control the PCIe
reference clock on i.MX6SX. Instead, it is part of i.MX6SX PCIe core
reset sequence.

Move the IMX6SX_GPR12_PCIE_TEST_POWERDOWN assertion/deassertion into
the core reset functions to properly reflect its purpose. Remove the
.enable_ref_clk() callback for i.MX6SX since it was incorrectly
manipulating this bit.

Fixes: e3c06cd063 ("PCI: imx6: Add initial imx6sx support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260319090844.444987-1-hongxing.zhu@nxp.com
2026-05-18 17:52:05 -05:00
Mahesh Vaidya
7a94138cae PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.

Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.

So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.

Fixes: c63aed7334 ("PCI: altera: Use pci_host_probe() to register host")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-3-mahesh.vaidya@altera.com
2026-05-15 23:04:29 +05:30
Mahesh Vaidya
5ef4bac021 PCI: altera: Do not dispose parent IRQ mapping
altera_pcie_irq_teardown() calls irq_dispose_mapping() on pcie->irq.
However, pcie->irq is the parent IRQ returned by platform_get_irq(), not
the mapping created by Altera INTx irq_domain.

The Altera driver only sets the chained handler on the parent IRQ. It
should detach that handler during teardown, but it should not dispose the
parent IRQ mapping, which belongs to the parent interrupt controller's
irq_domain.

Drop irq_dispose_mapping(pcie->irq) from the teardown path.

Note that during irqchip remove(), the child IRQs should've disposed. But
since the chained handler itself is removed, there is no way the stale
child IRQs (if exists) could fire. So it is safe here.

Fixes: ec15c4d0d5 ("PCI: altera: Allow building as module")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: added a note about IRQ disposal]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-2-mahesh.vaidya@altera.com
2026-05-15 22:58:13 +05:30
Hans Zhang
f02459d034 PCI: keembay: Use common mode field in struct dw_pcie
Remove the redundant mode field from struct keembay_pcie and use the
existing mode field in struct dw_pcie instead.

This avoids duplication and prevents potential inconsistencies between
the two mode fields.

Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-5-18255117159@163.com
2026-05-15 22:43:08 +05:30
Hans Zhang
a8bf471f87 PCI: dwc: Use common mode field in struct dw_pcie
Remove the redundant mode field from struct dw_plat_pcie and use the
existing mode field in struct dw_pcie instead.

This avoids duplication and prevents potential inconsistencies between
the two mode fields.

Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-4-18255117159@163.com
2026-05-15 22:43:04 +05:30
Hans Zhang
5d47f6aeff PCI: artpec6: Use common mode field in struct dw_pcie
Remove the redundant mode field from struct artpec6_pcie and use the
existing mode field in struct dw_pcie instead.

This avoids duplication and prevents potential inconsistencies between
the two mode fields.

Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-3-18255117159@163.com
2026-05-15 22:42:59 +05:30
Hans Zhang
3718315f58 PCI: dra7xx: Use common mode field in struct dw_pcie
Remove the redundant mode field from struct dra7xx_pcie and use the
existing mode field in struct dw_pcie instead.

This avoids duplication and prevents potential inconsistencies between
the two mode fields.

Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-2-18255117159@163.com
2026-05-15 22:42:53 +05:30
Manikanta Maddireddy
1e1b554c2b PCI: dwc: Apply ECRC workaround for DesignWare cores prior to 5.10a
The ECRC (TLP digest) workaround was originally applied only for DesignWare
core version 4.90a. Per discussion in Synopsys case, the dependency of the
iATU TD bit on ECRC generation was removed in 5.10a, so apply the
workaround for all DWC versions below that release.

Replace the misleading comment that referred to raw version constants
with readable DesignWare release name to help readability.

Fixes: b210b1595606 ("PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: corrected fixes tag format]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260410062507.657453-1-mmaddireddy@nvidia.com
2026-05-12 16:01:11 -05:00
Sai Krishna Musham
0492461a05 PCI: amd-mdb: Assert PERST# on shutdown
Add a shutdown handler for the AMD MDB PCIe host controller that
asserts the PERST# signal via GPIO before the system powers off or
reboots. This ensures the connected PCIe endpoint is held in reset
during shutdown.

Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
[mani: removed conditional check since GPIO APIs return safely if desc is NULL]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260427121227.290604-1-sai.krishna.musham@amd.com
2026-05-12 18:43:21 +05:30
Florian Eckert
19f90be49c PCI: intel-gw: Fix ATU base address setup and add optional DT 'atu' region
The ATU base address was set in intel_pcie_host_setup(), which is called
via pp->ops->init(). However, dw_pcie_get_resources() runs before this
callback and sets a default atu_base of 0x300000, which then gets
overwritten by the driver's value of 0xC0000.

But this ordering is broken because atu_base must be set before
dw_pcie_get_resources() runs, not after. So move the atu_base assignment
from intel_pcie_host_setup() to intel_pcie_probe() to fix the
initialization order.

The call stack is:

  intel_pcie_probe
    dw_pcie_host_init
      dw_pcie_host_get_resources
        dw_pcie_get_resources       <- sets atu_base = 0x300000
      pp->ops->init
        intel_pcie_rc_init
          intel_pcie_host_setup     <- was overwriting atu_base here

Additionally, add support for parsing the ATU region from the device tree.
If an 'atu' region is present in DT, the DWC core parses it via
dw_pcie_get_resources() and the driver does not set atu_base explicitly.
If 'atu' is absent, the driver falls back to the hardcoded offset (0xC0000
from DBI base) for backwards compatibility, with a warning to the user.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-6-0a2b933fe04f@dev.tdt.de
2026-05-11 18:23:58 -05:00
Florian Eckert
1eedabe7c6 PCI: intel-gw: Add .start_link() callback
The pcie-intel-gw driver had no .start_link() callback.  Add one so the
driver works again and does not abort with the following error messages
during probing:

  intel-gw-pcie d1000000.pcie: host bridge /soc/pcie@d1000000 ranges:
  intel-gw-pcie d1000000.pcie:      MEM 0x00dc000000..0x00ddffffff -> 0x00dc000000
  intel-combo-phy d0c00000.combo-phy: Set combo mode: combophy[1]: mode: PCIe single lane mode
  intel-gw-pcie d1000000.pcie: No outbound iATU found
  intel-gw-pcie d1000000.pcie: Cannot initialize host
  intel-gw-pcie d1000000.pcie: probe with driver intel-gw-pcie failed with error -22
  intel-gw-pcie c1100000.pcie: host bridge /soc/pcie@c1100000 ranges:
  intel-gw-pcie c1100000.pcie:      MEM 0x00ce000000..0x00cfffffff -> 0x00ce000000
  intel-combo-phy c0c00000.combo-phy: Set combo mode: combophy[3]: mode: PCIe single lane mode
  intel-gw-pcie c1100000.pcie: No outbound iATU found
  intel-gw-pcie c1100000.pcie: Cannot initialize host
  intel-gw-pcie c1100000.pcie: probe with driver intel-gw-pcie failed with error -22

Fixes: c5097b9869 ("Revert "PCI: dwc: Wait for link up only if link is started"")
Fixes: da56a1bfba ("PCI: dwc: Wait for link up only if link is started")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: remove timestamps]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-5-0a2b933fe04f@dev.tdt.de
2026-05-11 18:19:15 -05:00
Florian Eckert
febf9ed3c3 PCI: intel-gw: Enable clock before PHY init
To ensure that the boot sequence is correct, the DWC PCIe core clock must
be switched on before PHY init call [1]. This changes are based on patched
kernel sources of the MaxLinear SDK.

The reason why the MaxLinear SDK is used as a reference here is, that this
PCIe DWC IP is used in the URX851 and URX850 SoC. This SoC was originally
developed by Intel when they acquired Lantiq’s home networking division in
2015 [2]. In 2020 the home network division was sold to MaxLinear [3].
Since then, this SoC belongs to MaxLinear. They use their own SDK, which
runs on kernel version '5.15.x'.

[1] https://github.com/maxlinear/linux/blob/updk_9.1.90/drivers/pci/controller/dwc/pcie-intel-gw.c#L544
[2] https://www.intc.com/news-events/press-releases/detail/364/intel-to-acquire-lantiq-advancing-the-connected-home
[3] https://investors.maxlinear.com/press-releases/detail/395/maxlinear-to-acquire-intels-home-gateway-platform

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-4-0a2b933fe04f@dev.tdt.de
2026-05-11 18:18:45 -05:00
Florian Eckert
abddc0539e PCI: intel-gw: Move interrupt enable to own function
To improve the readability of the code, move the interrupt enable
instructions to a separate function. That is already done for the disable
interrupt instruction.

In addition, clear and disable all pending interrupts, as is done in
intel_pcie_core_irq_disable(). After that, enable all relevant interrupts
again. The 'PCIE_APP_IRNEN' definition contains all the relevant interrupts
that are of interest.

This change is also done in the MaxLinear SDK [1]. As I unfortunately don’t
have any documentation for this IP core, I suspect that the intention is to
set the IP core for interrupt handling to a specific state. Perhaps the
problem is that the IP core did not reinitialize the interrupt register
properly after a power cycle.

In my view, it can’t do any harm to switch the interrupt off and then on
again to set them to a specific state.

The reason why the MaxLinear SDK is used as a reference here is, that this
PCIe DWC IP is used in the URX851 and URX850 SoC. This SoC was originally
developed by Intel when they acquired Lantiq’s home networking division in
2015 [2]. In 2020 the home network division was sold to MaxLinear [3].
Since then, this SoC belongs to MaxLinear. They use their own SDK, which
runs on kernel version '5.15.x'.

[1] https://github.com/maxlinear/linux/blob/updk_9.1.90/drivers/pci/controller/dwc/pcie-intel-gw.c#L431
[2] https://www.intc.com/news-events/press-releases/detail/364/intel-to-acquire-lantiq-advancing-the-connected-home
[3] https://investors.maxlinear.com/press-releases/detail/395/maxlinear-to-acquire-intels-home-gateway-platform

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-3-0a2b933fe04f@dev.tdt.de
2026-05-11 18:17:09 -05:00
Florian Eckert
75479bed53 PCI: intel-gw: Remove unused PCIE_APP_INTX_OFST definition
The C preprocessor define 'PCIE_APP_INTX_OFST' is not used in the sources.
Delete it.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-2-0a2b933fe04f@dev.tdt.de
2026-05-11 18:16:37 -05:00
Koichiro Den
ec2075cfc6 PCI: dwc: ep: Expose integrated eDMA resources via EPC aux-resource API
Implement the EPC aux-resource API for DesignWare endpoint controllers
with integrated eDMA.

Currently, only report an interrupt-emulation doorbell register
(PCI_EPC_AUX_DOORBELL_MMIO), including its Linux IRQ and the write data
needed to trigger the interrupt.

If the DMA controller MMIO window is already exposed via a
platform-owned fixed BAR subregion, also provide the BAR number and
offset so EPF drivers can reuse it without reprogramming the BAR.

Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-4-den@valinux.co.jp
2026-04-30 21:48:41 +05:30
Koichiro Den
bfb9502651 PCI: dwc: Record integrated eDMA register window
Some DesignWare PCIe controllers integrate an eDMA block whose registers
are located in a dedicated register window.

The EP-side aux-resource code exposes an interrupt-emulation doorbell
register (DOORBELL_MMIO) from that window. Its location is derived from
the start of the eDMA register window plus the doorbell offset already
provided by dw-edma, and the window size is used to validate the
computed register location.

Record the physical base and size of the integrated eDMA register window
in struct dw_pcie so the EP-side DesignWare aux-resource provider can
construct that doorbell resource.

Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-3-den@valinux.co.jp
2026-04-30 21:48:30 +05:30
Linus Torvalds
ff57d59200 LoongArch changes for v7.1
1, Adjust build infrastructure for 32BIT/64BIT;
 2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
 3, Show and handle CPU vulnerabilites correctly;
 4, Batch the icache maintenance for jump_label;
 5, Add more atomic instructions support for BPF JIT;
 6, Add more features (e.g. fsession) support for BPF trampoline;
 7, Some bug fixes and other small changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmnpwWgWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImeiAXD/0RSRhj2y8LYGhVSPStMgN4uwMl
 1ylbkRg0biTvV0g8sD1R3MQ58/tKBZY5wTeLjwT50rl+JgOqVdrN6OMAxjwOKzJ6
 7C0rgpxBG5/YHI93paFVIYszsiWhRQaB5qfZCUOr230ZDJzvnfF1aH6JLybeHoMp
 HvERNURQsRbZo9yc69YxhrmHETEbum37u9hsrY5mJSEs5Fh+QxvTSYjE36z3Dtal
 YFqopTCaBgAhVw6BldVAcyvGvVK+d6iQEA035jObNLKKReNkwsQixxgnJhDSkbbG
 Z3md+hWp+YQQElGIP5q6+rj1rJZGrs/XL3HAnTQfXN+8bXIUO9AOf2/l5f9fZx7o
 2Vtt8n2/vVdzsVnKiHXGtsZ5uXrw4/kLiMZSCrUMZCtEOxJV9mmrVskPeie0iq0/
 nDG9uCgRldL8Xpg7d5NM9coECui3J+ztNkv06tL/JLm02bJPuqNwt3FeA1T/aH1c
 l2Hpw3Xuzl7lYuAYoa5CMm4X6yD/RA6w44pW1NKnb6j6llIOk6V6NwcwggWUnqht
 oB5VIqPKMOYjZ+fLurI2o9VWqWokJxDdzyrHhXyaG0JRK9Vak06C8UI5BQuosu88
 9WBoxK77PyNa60m56C32OZ5tu4UoPT8PgZWXDQDwn82SWzuYKWRruS2ng5A/JF7r
 H2Ez4iBjs2/P7vTQHA==
 =FiFl
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Adjust build infrastructure for 32BIT/64BIT

 - Add HIGHMEM (PKMAP and FIX_KMAP) support

 - Show and handle CPU vulnerabilites correctly

 - Batch the icache maintenance for jump_label

 - Add more atomic instructions support for BPF JIT

 - Add more features (e.g. fsession) support for BPF trampoline

 - Some bug fixes and other small changes

* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
  selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
  LoongArch: BPF: Add fsession support for trampolines
  LoongArch: BPF: Introduce emit_store_stack_imm64() helper
  LoongArch: BPF: Support up to 12 function arguments for trampoline
  LoongArch: BPF: Support small struct arguments for trampoline
  LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
  LoongArch: BPF: Support load-acquire and store-release instructions
  LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
  LoongArch: BPF: Add the default case in emit_atomic() and rename it
  LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
  LoongArch: Batch the icache maintenance for jump_label
  LoongArch: Add flush_icache_all()/local_flush_icache_all()
  LoongArch: Add spectre boundry for syscall dispatch table
  LoongArch: Show CPU vulnerabilites correctly
  LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
  LoongArch: Use get_random_canary() for stack canary init
  LoongArch: Improve the logging of disabling KASLR
  LoongArch: Align FPU register state to 32 bytes
  LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
  LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
  ...
2026-04-24 09:54:45 -07:00
Linus Torvalds
8fd12b03c7 hyperv-next for v7.1
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
 k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
 TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
 nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
 mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
 +KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
 =4Ke3
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Wei Liu:

 - Fix cross-compilation for hv tools (Aditya Garg)

 - Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)

 - Limit channel interrupt scan to relid high water mark (Michael
   Kelley)

 - Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)

 - Fix cleanup and shutdown issues for MSHV (Jork Loeser)

 - Introduce more tracing support for MSHV (Stanislav Kinsburskii)

* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Skip LP/VP creation on kexec
  x86/hyperv: move stimer cleanup to hv_machine_shutdown()
  Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
  mshv: Add tracepoint for GPA intercept handling
  mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
  tools: hv: Fix cross-compilation
  Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
  mshv: Introduce tracing support
  Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
2026-04-22 09:50:46 -07:00
Huacai Chen
3d9aba6618 LoongArch: Adjust build infrastructure for 32BIT/64BIT
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2026-04-22 15:44:26 +08:00
Linus Torvalds
40286d6379 pci-v7.1-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmnfwfMUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxwIRAAlN1h5er8aFDbjON5YMXBZqlQmzaC
 bjlUHgwm7HkdErTFozyuqhE8QUO1kCm4uMQzeyJdfY9nRWqMDOuKYxMD5j0exk+o
 4tbbJg6Xx4dq7Qrawy9PhxyQm/PDAcvs+FRRlGala+qq9o3fxPDOAZVDE/1C8qFQ
 Jd7GGd7NZn/NN4xrqST4RQHjO8fwaMwmksWCStsb79kfesQWP6kLADGfIMcWxNUB
 2s+oTnK6Hw0tkBv56n6i8mbb0EzS3/RN1daTevGAta1rmfUVVtWGRZ4paMvv0Owi
 Rl5+O5Jz6/c1qiXZbUqu5CRQPIy7Dr3JPvURcZX6qbsV8PzWXZr0Wi+geWefGOnp
 55y+3OT0vdBGAuXLJhrcU7Clzq9D/TZOt8oTI8IFArUfDlmrAIdozPn7gr+VGre5
 QuKymSk3XWtyIbe4o8UeZ4f9g0y6ZY1XvtvB7K1tze+OOmqlkfq966+z8aZuGOKx
 ZvAU/NIat5H02EgB4dEVOP8R5vPZlXGT0RLGl1JWRypPWyZDbVVA3z927qRQG5md
 IsVq8WaIrB1zyl9g37lZeEaYwP/qCIQsHkMGPYcP4wdOQEV9AQqi5pmjMXnWyQJD
 PR1nvmTKW7USRCJ+pz8xPhZh0cj3ENaddORTD3I/0CGVV0y452bU/5rr4T+K04bK
 PCJBpxTIDuWDwXc=
 =FFRz
 -----END PGP SIGNATURE-----

Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
     P)

   - Enable AtomicOps only if we know the Root Port supports them (Gerd
     Bayer)

   - Don't enable AtomicOps for RCiEPs since none of them need Atomic
     Ops and we can't tell whether the Root Complex would support them
     (Gerd Bayer)

   - Leave Precision Time Measurement disabled until a driver enables it
     to avoid PCIe errors (Mika Westerberg)

   - Make pci_set_vga_state() fail if bridge doesn't support VGA
     routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
     errors to vga_get() callers including userspace via
     /dev/vga_arbiter (Simon Richter)

   - Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
     rzg3s drivers (where the actual controller constraints are known),
     and remove validation from the generic OF DT accessor (Hans Zhang)

   - Remove pc110pad driver (no longer useful after 486 CPU support
     removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
     Torokhov, Heiner Kallweit)

  Resource management:

   - Prevent assigning space to unimplemented bridge windows; previously
     we mistakenly assumed prefetchable window existed and assigned
     space and put a BAR there (Ahmed Naseef)

   - Avoid shrinking bridge windows to fit in the initial Root Port
     window; fixes one problem with devices with large BARs connected
     via switches, e.g., Thunderbolt (Ilpo Järvinen)

   - Pass full extent of empty space, not just the aligned space, to
     resource_alignf callback so free space before the requested
     alignment can be used (Ilpo Järvinen)

   - Place small resources before larger ones for better utilization of
     address space (Ilpo Järvinen)

   - Fix alignment calculation for resource size larger than align,
     e.g., bridge windows larger than the 1MB required alignment (Ilpo
     Järvinen)

  Reset:

   - Update slot handling so all ARI functions are treated as being in
     the same slot. They're all reset by Secondary Bus Reset, but
     previously drivers of ARI functions that appeared to be on a
     non-zero device weren't notified and fatal hardware errors could
     result (Keith Busch)

   - Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
     events (Keith Busch)

   - Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
     by CXL because it has no effect (Vidya Sagar)

   - Avoid FLR for AMD NPU device, where it causes the device to hang
     (Lizhi Hou)

  Error handling:

   - Clear only error bits in PCIe Device Status to avoid accidentally
     clearing Emergency Power Reduction Detected (Shuai Xue)

   - Check for AER errors even in devices without drivers (Lukas Wunner)

   - Initialize ratelimit info so DPC and EDR paths log AER error
     information (Kuppuswamy Sathyanarayanan)

  Power control:

   - Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
     generic pwrctrl driver can control it (Neil Armstrong)

  Hotplug:

   - Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
     doesn't complain when setting brightness fails because the endpoint
     is gone (Richard Cheng)

  Peer-to-peer DMA:

   - Allow wildcards in list of host bridges that support peer-to-peer
     DMA between hierarchy domains and add all Google SoCs (Jacob
     Moroni)

  Endpoint framework:

   - Advertise dynamic inbound mapping support in pci-epf-test and
     update host pci_endpoint_test to skip doorbell testing if not
     advertised by endpoint (Koichiro Den)

   - Return 0, not remaining timeout, when MHI eDMA ops complete so
     mhi_ep_ring_add_element() doesn't interpret non-zero as failure
     (Daniel Hodges)

   - Remove vntb and ntb duplicate resource teardown that leads to oops
     when .allow_link() fails or .drop_link() is called (Koichiro Den)

   - Disable vntb delayed work before clearing BAR mappings and
     doorbells to avoid oops caused by doing the work after resources
     have been torn down (Koichiro Den)

   - Add a way to describe reserved subregions within BARs, e.g.,
     platform-owned fixed register windows, and use it for the RK3588
     BAR4 DMA ctrl window (Koichiro Den)

   - Add BAR_DISABLED for BARs that will never be available to an EPF
     driver, and change some BAR_RESERVED annotations to BAR_DISABLED
     (Niklas Cassel)

   - Add NTB .get_dma_dev() callback for cases where DMA API requires a
     different device, e.g., vNTB devices (Koichiro Den)

   - Add reserved region types for MSI-X Table and PBA so Endpoint
     controllers can them as describe hardware-owned regions in a
     BAR_RESERVED BAR (Manikanta Maddireddy)

   - Make Tegra194/234 BAR0 programmable and remove 1MB size limit
     (Manikanta Maddireddy)

   - Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
     (Manikanta Maddireddy)

   - Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
     (Manikanta Maddireddy)

   - Skip the BAR subrange selftest if there are not enough inbound
     window resources to run the test (Christian Bruel)

  New native PCIe controller drivers:

   - Add DT binding and driver for Andes QiLai SoC PCIe host controller
     (Randolph Lin)

   - Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
     Zhang)

  Baikal T-1 PCIe controller driver:

   - Remove driver since it never quite became usable (Andy Shevchenko)

  Cadence PCIe controller driver:

   - Implement byte/word config reads with dword (32-bit) reads because
     some Cadence controllers don't support sub-dword accesses (Aksh
     Garg)

  CIX Sky1 PCIe controller driver:

   - Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
     Zhu)

   - Delay instead of polling for L2/L3 Ready after PME_Turn_off when
     suspending i.MX6SX because LTSSM registers are inaccessible
     (Richard Zhu)

   - Separate PERST# assertion (for resetting endpoints) from core reset
     (for resetting the RC itself) to prepare for new DTs with PERST#
     GPIO in per-Root Port nodes (Sherry Sun)

   - Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
     MSI from downstream devices will work (Richard Zhu)

   - Fix i.MX95 reference clock source selection when internal refclk is
     used (Franz Schnyder)

  Freescale Layerscape PCIe controller driver:

   - Allow building as a removable module (Sascha Hauer)

  MediaTek PCIe Gen3 controller driver:

   - Use dev_err_probe() to simplify error paths and make deferred probe
     messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
     Tsai)

   - Power off device if setup fails (Chen-Yu Tsai)

   - Integrate new pwrctrl API to enable power control for WiFi/BT
     adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)

  NVIDIA Tegra194 PCIe controller driver:

   - Poll less aggressively and non-atomically for PME_TO_Ack during
     transition to L2 (Vidya Sagar)

   - Disable LTSSM after transition to Detect on surprise link down to
     stop toggling between Polling and Detect (Manikanta Maddireddy)

   - Don't force the device into the D0 state before L2 when suspending
     or shutting down the controller (Vidya Sagar)

   - Disable PERST# IRQ only in Endpoint mode because it's not
     registered in Root Port mode (Manikanta Maddireddy)

   - Handle 'nvidia,refclk-select' as optional (Vidya Sagar)

   - Disable direct speed change in Endpoint mode so link speed change
     is controlled by the host (Vidya Sagar)

   - Set LTR values before link up to avoid bogus LTR messages with 0
     latency (Vidya Sagar)

   - Allow system suspend when the Endpoint link is down (Vidya Sagar)

   - Use DWC IP core version, not Tegra custom values, to avoid DWC core
     version check warnings (Manikanta Maddireddy)

   - Apply ECRC workaround to devices based on DesignWare 5.00a as well
     as 4.90a (Manikanta Maddireddy)

   - Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
     erratum (Vidya Sagar)

   - Delay post-PERST# cleanup until core is powered on to avoid CBB
     timeout (Manikanta Maddireddy)

   - Assert CLKREQ# so switches that forward it to their downstream side
     can bring up those links successfully (Vidya Sagar)

   - Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
     from any previous bad link state (Vidya Sagar)

   - Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
     DMA driver and Endpoint controller driver can share the interrupt
     line (Vidya Sagar)

   - Enable DMA interrupt to support DMA in both Root Port and Endpoint
     modes (Vidya Sagar)

   - Enable hardware link retraining after link goes down in Endpoint
     mode (Vidya Sagar)

   - Add DT binding and driver support for core clock monitoring (Vidya
     Sagar)

  Qualcomm PCIe controller driver:

   - Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
     since Qcom Root Ports support hotplug events like DL_Up/Down and
     can accept writes to Slot Control without delays between writes
     (Krishna Chaitanya Chundru)

  Renesas R-Car PCIe controller driver:

   - Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)

   - Reduce EPC BAR alignment requirement to 4K (Koichiro Den)

  Renesas RZ/G3S PCIe controller driver:

   - Add RZ/G3E to DT binding and to driver (John Madieu)

   - Assert (not deassert) resets in probe error path (John Madieu)

   - Assert resets in suspend path in reverse order they were deasserted
     during probe (John Madieu)

   - Rework inbound window algorithm to prevent mapping more than
     intended region and enforce alignment on size, to prepare for
     RZ/G3E support (John Madieu)

  Rockchip DesignWare PCIe controller driver:

   - Add tracepoints for PCIe controller LTSSM transitions and link rate
     changes (Shawn Lin)

   - Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
     Lin)

  SOPHGO PCIe controller driver:

   - Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
     advertise support for them (Yao Zi)

  Synopsys DesignWare PCIe controller driver:

   - Continue with system suspend even if an Endpoint doesn't respond
     with PME_TO_Ack message (Manivannan Sadhasivam)

   - Set Endpoint MSI-X Table Size in the correct function of a
     multi-function device when configuring MSI-X, not in Function 0
     (Aksh Garg)

   - Set Max Link Width and Max Link Speed for all functions of a
     multi-function device, not just Function 0 (Aksh Garg)

   - Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)

  Miscellaneous:

   - Warn only once about invalid ACS kernel parameter format (Richard
     Cheng)

   - Suppress FW_BUG warning when writing sysfs 'numa_node' with the
     current value (Li RongQing)

   - Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"

* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
  PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
  PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
  PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
  PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
  PCI: tegra194: Add core monitor clock support
  dt-bindings: PCI: tegra194: Add monitor clock support
  PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
  PCI: tegra194: Enable DMA interrupt
  PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
  PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
  PCI: tegra194: Assert CLKREQ# explicitly by default
  PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
  PCI: tegra194: Disable L1.2 capability of Tegra234 EP
  PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
  PCI: tegra194: Use DWC IP core version
  PCI: tegra194: Free up Endpoint resources during remove()
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
  PCI: tegra194: Disable direct speed change for Endpoint mode
  PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
  ...
2026-04-15 14:41:21 -07:00
Dexuan Cui
0d5acba633 Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
With commit f84b21da36 ("PCI: hv: Don't load the driver for baremetal root partition"),
the bare metal Linux root partition won't use the pci-hyperv driver, but
when a Linux VM runs on the Linux root partition, pci-hyperv's module_init
function init_hv_pci_drv() can still run, e.g. in the case of
CONFIG_PCI_HYPERV=y, even if the VMBus driver is not used in such a VM
(i.e. the hv_vmbus driver's init function returns -ENODEV due to
vmbus_root_device being NULL).

In such a Linux VM, init_hv_pci_drv() runs with a side effect: the 3
hvpci_block_ops callbacks are set to functions that depend on hv_vmbus.

Later, when the MLX driver in such a VM invokes the callbacks, e.g. in
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c:
mlx5_hv_register_invalidate(), hvpci_block_ops.reg_blk_invalidate() is
hv_register_block_invalidate() rather than a NULL function pointer, and
hv_register_block_invalidate() assumes that it can find a struct
hv_pcibus_device from pdev->bus->sysdata, which is false in such a VM.

Consequently, hv_register_block_invalidate() -> get_pcichild_wslot() ->
spin_lock_irqsave() may hang since it can be accessing an invalid
spinlock pointer.

Fix the issue by exporting hv_vmbus_exists() and using it in pci-hyperv:

    hv_root_partition() is true and hv_nested is false ==>
	hv_vmbus_exists() is false.

    hv_root_partition() is true and hv_nested is true ==>
	hv_vmbus_exists() is true.

    hv_root_partition() is false ==> hv_vmbus_exists() is true.

While at it, rename vmbus_exists() to hv_vmbus_exists() to follow the
convention that all public functions have the hv_ prefix; also change
the return value's type from int to bool to make the code more readable;
also move the two pr_info() calls.

Reported-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-04-14 04:42:44 +00:00
Linus Torvalds
2e31b16101 ACPI support updates for 7.1-rc1
- Update maintainers information regarding ACPICA (Rafael Wysocki)
 
  - Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy() (Kees
    Cook)
 
  - Trigger an ordered system power off after encountering a fatal error
    operator in AML (Armin Wolf)
 
  - Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
 
  - Remove the temporary stop-gap acpi_pptt_cache_v1_full structure from
    the ACPI PPTT parser (Ben Horgan)
 
  - Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
    DeSimone)
 
  - Address multiple assorted issues and clean up the code in the ACPI
    processor idle driver (Huisong Li)
 
  - Replace strlcat() in the ACPI processor idle drive with a better
    alternative (Andy Shevchenko)
 
  - Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki)
 
  - Move reference performance to capabilities and fix an uninitialized
    variable in the ACPI CPPC library (Pengjie Zhang)
 
  - Add support for the Performance Limited Register to the ACPI CPPC
    library (Sumit Gupta)
 
  - Add cppc_get_perf() API to read performance controls, extend
    cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
    library warn on missing mandatory DESIRED_PERF register (Sumit Gupta)
 
  - Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target
    callbacks to allow it to control performance bounds via standard
    scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs
    documentation for the Performance Limited Register to it (Sumit Gupta)
 
  - Add ACPI support to the platform device interface in the CMOS RTC
    driver, make the ACPI core device enumeration code create a platform
    device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
    Wysocki)
 
  - Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
    driver and clean up the CMOS RTC ACPI address space handler (Rafael
    Wysocki)
 
  - Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
    and allow that driver to work without a dedicated IRQ if the ACPI
    alarm is used (Rafael Wysocki)
 
  - Clean up the ACPI TAD driver in various ways and add an RTC class
    device interface, including both the RTC setting/reading and alarm
    timer support, to it (Rafael Wysocki)
 
  - Clean up the ACPI AC and ACPI PAD (processor aggregator device)
    drivers (Rafael Wysocki)
 
  - Rework checking for duplicate video bus devices and consolidate
    pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
    Wysocki)
 
  - Update the ACPI core device drivers to stop setting acpi_device_name()
    unnecessarily (Rafael Wysocki)
 
  - Rearrange code using acpi_device_class() in the ACPI core device
    drivers and update them to stop setting acpi_device_class()
    unnecessarily (Rafael Wysocki)
 
  - Define ACPI_AC_CLASS in one place (Rafael Wysocki)
 
  - Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
    bind to platform devices instead of ACPI devices (Rafael Wysocki)
 
  - Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
    hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
    Feng)
 
  - Consolidate the interface for obtaining a CPU UID from ACPI across
    architectures and use it to address incorrect PCI TPH Steering Tag
    on ARM64 resulting from the invalid assumption that the ACPI
    Processor UID would always be the same as the corresponding logical
    CPU ID in Linux (Chengwen Feng)
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY/bcSHHJqd0Byand5
 c29ja2kubmV0AAoJEO5fvZ0v1OO1chAH/1cGRzh9lSgQ3ZdzIIA5rpRtwKC+CTNz
 iNDvQ97W73B2N+WYzMaloOh+ZVA1Vdqc+8921aH6HI+v7wtg/ZV3h/hU7TagHNY/
 bRFDYaeRXVj4aBXNfoVdn7G5UU9j/kIDcV25I2ubOBqZaO6T5p8p1BK0j0vEj+sG
 yR7XwpEhr2OUQwlIFGKskJwFaH57QJXPEY8wf+o+lMEx/7o/JQRJzKFwsYu01ZZV
 kQy9Ee08P/rsNJwU2ibmZu5P3JMnhategAT8VAMBvkfLScv2sKX+1Vz19NGXzm71
 ARaT7y8MSPNb7SAvWmNZ/rVYrYIL+D3a76Gd7MOGrbVWEn6oXIbCIhY=
 =6vEK
 -----END PGP SIGNATURE-----

Merge tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI support updates from Rafael Wysocki:
 "These include an update of the CMOS RTC driver and the related ACPI
  and x86 code that, among other things, switches it over to using the
  platform device interface for device binding on x86 instead of the PNP
  device driver interface (which allows the code in question to be
  simplified quite a bit), a major update of the ACPI Time and Alarm
  Device (TAD) driver adding an RTC class device interface to it, and
  updates of core ACPI drivers that remove some unnecessary and not
  really useful code from them.

  Apart from that, two drivers are converted to using the platform
  driver interface for device binding instead of the ACPI driver one,
  which is slated for removal, support for the Performance Limited
  register is added to the ACPI CPPC library and there are some
  janitorial updates of it and the related cpufreq CPPC driver, the ACPI
  processor driver is fixed and cleaned up, and NVIDIA vendor CPER
  record handler is added to the APEI GHES code.

  Also, the interface for obtaining a CPU UID from ACPI is consolidated
  across architectures and used for fixing a problem with the PCI TPH
  Steering Tag on ARM64, there are two updates related to ACPICA, a
  minor ACPI OS Services Layer (OSL) update, and a few assorted updates
  related to ACPI tables parsing.

  Specifics:

   - Update maintainers information regarding ACPICA (Rafael Wysocki)

   - Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
     (Kees Cook)

   - Trigger an ordered system power off after encountering a fatal
     error operator in AML (Armin Wolf)

   - Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)

   - Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
     from the ACPI PPTT parser (Ben Horgan)

   - Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
     DeSimone)

   - Address multiple assorted issues and clean up the code in the ACPI
     processor idle driver (Huisong Li)

   - Replace strlcat() in the ACPI processor idle drive with a better
     alternative (Andy Shevchenko)

   - Rearrange and clean up acpi_processor_errata_piix4() (Rafael
     Wysocki)

   - Move reference performance to capabilities and fix an uninitialized
     variable in the ACPI CPPC library (Pengjie Zhang)

   - Add support for the Performance Limited Register to the ACPI CPPC
     library (Sumit Gupta)

   - Add cppc_get_perf() API to read performance controls, extend
     cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
     library warn on missing mandatory DESIRED_PERF register (Sumit
     Gupta)

   - Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
     target callbacks to allow it to control performance bounds via
     standard scaling_min_freq and scaling_max_freq sysfs attributes and
     add sysfs documentation for the Performance Limited Register to it
     (Sumit Gupta)

   - Add ACPI support to the platform device interface in the CMOS RTC
     driver, make the ACPI core device enumeration code create a
     platform device for the CMOS RTC, and drop CMOS RTC PNP device
     support (Rafael Wysocki)

   - Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
     driver and clean up the CMOS RTC ACPI address space handler (Rafael
     Wysocki)

   - Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
     and allow that driver to work without a dedicated IRQ if the ACPI
     alarm is used (Rafael Wysocki)

   - Clean up the ACPI TAD driver in various ways and add an RTC class
     device interface, including both the RTC setting/reading and alarm
     timer support, to it (Rafael Wysocki)

   - Clean up the ACPI AC and ACPI PAD (processor aggregator device)
     drivers (Rafael Wysocki)

   - Rework checking for duplicate video bus devices and consolidate
     pnp.bus_id workarounds handling in the ACPI video bus driver
     (Rafael Wysocki)

   - Update the ACPI core device drivers to stop setting
     acpi_device_name() unnecessarily (Rafael Wysocki)

   - Rearrange code using acpi_device_class() in the ACPI core device
     drivers and update them to stop setting acpi_device_class()
     unnecessarily (Rafael Wysocki)

   - Define ACPI_AC_CLASS in one place (Rafael Wysocki)

   - Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
     to bind to platform devices instead of ACPI devices (Rafael
     Wysocki)

   - Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
     hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
     Feng)

   - Consolidate the interface for obtaining a CPU UID from ACPI across
     architectures and use it to address incorrect PCI TPH Steering Tag
     on ARM64 resulting from the invalid assumption that the ACPI
     Processor UID would always be the same as the corresponding logical
     CPU ID in Linux (Chengwen Feng)"

* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
  ACPICA: Update maintainers information
  watchdog: ni903x_wdt: Convert to a platform driver
  ACPI: PAD: xen: Convert to a platform driver
  ACPI: processor: idle: Reset cpuidle on C-state list changes
  cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
  PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
  ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
  perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
  ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
  x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
  PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
  ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
  ACPI: tables: Enable FPDT on LoongArch
  ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
  ACPI: processor: idle: Reset power_setup_done flag on initialization failure
  ACPI: TAD: Add alarm support to the RTC class device interface
  ...
2026-04-13 19:25:07 -07:00
Bjorn Helgaas
b274423c79 Merge branch 'pci/controller/rzg3s-host'
- Assert (not deassert) resets in probe error path (John Madieu)

- Assert resets in suspend path in reverse order they were deasserted
  during probe (John Madieu)

- Rework inbound window algorithm to prevent mapping more than intended
  region and enforce alignment on size, to prepare for RZ/G3E support (John
  Madieu)

- Fix renesas,r9a08g045s33-pcie 'serr_cor' typo and convert properties from
  'description' to 'const' for better validation (John Madieu)

- Add RZ/G3E to DT binding and to driver (John Madieu)

* pci/controller/rzg3s-host:
  PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
  PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
  PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
  PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
  PCI: rzg3s-host: Make configuration reset lines optional
  PCI: rzg3s-host: Make SYSC register offsets SoC-specific
  dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
  dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
  PCI: rzg3s-host: Rework inbound window algorithm for supporting RZ/G3E SoC
  PCI: rzg3s-host: Reorder reset assertion during suspend
  PCI: rzg3s-host: Fix reset handling in probe error path

# Conflicts:
#	drivers/pci/controller/pcie-rzg3s-host.c
2026-04-13 12:50:53 -05:00
Bjorn Helgaas
d096bd7d8b Merge branch 'pci/controller/mediatek-gen3'
- Use dev_err_probe() to simplify error paths and make deferred probe
  messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu Tsai)

- Initialize IRQ domains earlier to remove need for cleanup if it fails
  (Chen-Yu Tsai)

- Set up controller windows and MSI before bringing the link up to separate
  controller init and things related to downstream devices (Chen-Yu Tsai)

- Split out device power up and down helpers (Chen-Yu Tsai)

- Power off device if setup fails (Chen-Yu Tsai)

- Integrate new pwrctrl API to enable power control for WiFi/BT adapters on
  mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)

- Prevent leaking IRQ domains when IRQ not found (Chen-Yu Tsai)

* pci/controller/mediatek-gen3:
  PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
  PCI: mediatek-gen3: Integrate new pwrctrl API
  PCI: mediatek-gen3: Disable device if further setup fails
  PCI: mediatek-gen3: Split out device power helpers
  PCI: mediatek-gen3: Add error path for resume driver callbacks
  PCI: mediatek-gen3: Move controller setup steps before PERST# control
  PCI: mediatek-gen3: Move mtk_pcie_setup_irq() out of mtk_pcie_setup()
  PCI: mediatek-gen3: Clean up mtk_pcie_parse_port() with dev_err_probe()
2026-04-13 12:50:48 -05:00
Bjorn Helgaas
8a1c7effae Merge branch 'pci/controller/mediatek'
- Increase snprintf() buffer size to avoid truncation warnings (Ryder Lee)

* pci/controller/mediatek:
  PCI: mediatek: Fix possible truncation in mtk_pcie_parse_port()
2026-04-13 12:50:48 -05:00
Bjorn Helgaas
b43cdb32ee Merge branch 'pci/controller/dwc-tegra194'
- Poll less aggressively and non-atomically for PME_TO_Ack during
  transition to L2 (Vidya Sagar)

- Increase LTSSM poll time on surprise link down (Manikanta Maddireddy)

- Disable LTSSM after transition to Detect on surprise link down to stop
  toggling between Polling and Detect (Manikanta Maddireddy)

- Don't force the device into the D0 state before L2 when suspending or
  shutting down the controller (Vidya Sagar)

- Disable PERST# IRQ only in Endpoint mode because it's not registered in
  Root Port mode (Manikanta Maddireddy)

- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)

- Disable direct speed change in Endpoint mode so link speed change is
  controlled by the host (Vidya Sagar)

- Set LTR values before link up to avoid bogus LTR messages with 0 latency
  (Vidya Sagar)

- Allow system suspend when the Endpoint link is down (Vidya Sagar)

- During remove, free resources allocated during Endpoint .probe() (Vidya
  Sagar)

- Use DWC IP core version, not Tegra custom values, to avoid DWC core
  version check warnings (Manikanta Maddireddy)

- Apply ECRC workaround to devices based on DesignWare 5.00a as well
  as 4.90a (Manikanta Maddireddy)

- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum
  (Vidya Sagar)

- Delay post-PERST# cleanup until core is powered on to avoid CBB timeout
  (Manikanta Maddireddy)

- Assert CLKREQ# so switches that forward it to their downstream side can
  bring up those links successfully (Vidya Sagar)

- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from
  any previous bad link state (Vidya Sagar)

- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA
  driver and Endpoint controller driver can share the interrupt line (Vidya
  Sagar)

- Enable DMA interrupt to support DMA in both Root Port and Endpoint modes
  (Vidya Sagar)

- Enable hardware link retraining after link goes down in Endpoint mode
  (Vidya Sagar)

- Add DT binding and driver support for core clock monitoring (Vidya Sagar)

* pci/controller/dwc-tegra194:
  PCI: tegra194: Add core monitor clock support
  dt-bindings: PCI: tegra194: Add monitor clock support
  PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
  PCI: tegra194: Enable DMA interrupt
  PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
  PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
  PCI: tegra194: Assert CLKREQ# explicitly by default
  PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
  PCI: tegra194: Disable L1.2 capability of Tegra234 EP
  PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
  PCI: tegra194: Use DWC IP core version
  PCI: tegra194: Free up Endpoint resources during remove()
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
  PCI: tegra194: Disable direct speed change for Endpoint mode
  PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
  PCI: tegra194: Disable PERST# IRQ only in Endpoint mode
  PCI: tegra194: Don't force the device into the D0 state before L2
  PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down
  PCI: tegra194: Increase LTSSM poll time on surprise link down
  PCI: tegra194: Fix polling delay for L2 state
2026-04-13 12:50:47 -05:00
Bjorn Helgaas
bc55afb8fa Merge branch 'pci/controller/dwc-rockchip'
- Add tracepoints for PCIe controller LTSSM transitions and link rate
  changes (Shawn Lin)

- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn Lin)

* pci/controller/dwc-rockchip:
  PCI: dw-rockchip: Add pcie_ltssm_state_transition tracepoint support
  Documentation: tracing: Add PCI controller event documentation
  PCI: trace: Add PCI controller tracepoint feature
2026-04-13 12:50:47 -05:00
Bjorn Helgaas
1e6df556f1 Merge branch 'pci/controller/dwc-rcar-gen4-ep'
- Mark BAR0 and BAR2 as Resizable (Koichiro Den)

- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)

* pci/controller/dwc-rcar-gen4-ep:
  PCI: dwc: rcar-gen4: Change EPC BAR alignment to 4K as per the documentation
  PCI: dwc: rcar-gen4: Mark BAR0 and BAR2 as Resizable BARs in endpoint mode

# Conflicts:
#	drivers/pci/controller/dwc/pcie-rcar-gen4.c
2026-04-13 12:50:46 -05:00
Bjorn Helgaas
07f7d0f0ee Merge branch 'pci/controller/dwc-qcom'
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support' since
  Qcom Root Ports support hotplug events like DL_Up/Down and can accept
  writes to Slot Control without delays between writes (Krishna Chaitanya
  Chundru)

* pci/controller/dwc-qcom:
  PCI: qcom: Advertise Hotplug Slot Capability with no Command Completion support
2026-04-13 12:50:23 -05:00
Bjorn Helgaas
b94fd08746 Merge branch 'pci/controller/dwc-layerscape'
- Allow Layerscape host controller driver to be build as a removable module
  (Sascha Hauer)

* pci/controller/dwc-layerscape:
  PCI: layerscape: Allow to compile as module
2026-04-13 12:50:23 -05:00
Bjorn Helgaas
d33fae1754 Merge branch 'pci/controller/dwc-imx6'
- Fix device node reference leak in imx_pcie_probe() (Felix Gu)

- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
  suspending i.MX6SX because LTSSM registers are inaccessible (Richard Zhu)

- Separate PERST# assertion (for resetting endpoints) from core reset (for
  resetting the RC itself) to prepare for new DTs with PERST# GPIO in
  per-Root Port nodes (Sherry Sun)

- Retain the Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
  MSI from downstream devices will work (Richard Zhu)

- Fix the i.MX95 reference clock source selection when internal refclk is
  used (Franz Schnyder)

* pci/controller/dwc-imx6:
  PCI: imx6: Fix reference clock source selection for i.MX95
  PCI: imx6: Keep Root Port MSI capability with iMSI-RX to work around hardware bug
  PCI: imx6: Separate PERST# assertion from core reset functions
  PCI: imx6: Change imx_pcie_deassert_core_reset() return type to void
  PCI: imx6: Skip waiting for L2/L3 Ready on i.MX6SX
  PCI: imx6: Fix device node reference leak in imx_pcie_probe()
2026-04-13 12:50:23 -05:00
Bjorn Helgaas
927e9d9d4e Merge branch 'pci/controller/dwc-eswin'
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan Zhang)

* pci/controller/dwc-eswin:
  PCI: eswin: Add ESWIN PCIe Root Complex driver
  dt-bindings: PCI: eswin: Add ESWIN PCIe Root Complex

# Conflicts:
#	drivers/pci/controller/dwc/Kconfig
#	drivers/pci/controller/dwc/Makefile
2026-04-13 12:50:22 -05:00