Currently we use a messy mix of intel_wait_for_register*()
and __intel_wait_for_register*() to implement various
register polling functions. Make the mess a bit more understandable
by always using the __intel_wait_for_register*() stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-2-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When smbd_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smbd_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in smbd_destroy() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.
So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: ffbfc73e84 ("smb: client: let smbd_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same old behavior.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor.
Fixes: 17156f23e9 ("ALSA: usb: add UAC3 BADD profiles support")
Signed-off-by: Haein Lee <lhi0729@kaist.ac.kr>
Link: https://patch.msgid.link/vwhzmoba9j2f.vwhzmob9u9e2.g6@dooray.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ciu clock is 2 times of io clock, but the sample clk used is
derived from io clock provided to the card. So we should use
io clock to calculate the phase.
Fixes: 59903441f5 ("mmc: dw_mmc-rockchip: Add internal phase support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
While the auxiliary bus was a nice bandaid, and meant that re-writing
the representation of the clock regions in devicetree was not required,
it has run its course. The "mss_top_sysreg" region that contains the
clock and reset regions, also contains pinctrl and an interrupt
controller, so the time has come rewrite the devicetree and probe the
reset controller from an mfd devicetree node, rather than implement
those drivers using the auxiliary bus. Wanting to avoid propagating this
naive/incorrect description of the hardware to the new pic64gx SoC is a
major motivating factor here.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This adds CQE support for the Rockchip RK3588 and RK3576 platform. To
be functional, the eMMC device-tree node must have a 'supports-cqe;'
flag property.
As the RK3576 device-tree has been upstreamed with the 'supports-cqe;'
property set by default, the kernel already tried to use CQE, which
results in system hang during suspend. This fixes the issue.
Co-developed-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch refactors pxamci_probe() to use devm-managed resource
allocation (e.g. devm_dma_request_chan) and dev_err_probe() for
improved readability and automatic cleanup on probe failure.
It also removes redundant NULL assignments and manual resource release
logic from pxamci_probe(), and eliminates the corresponding release
calls from pxamci_remove().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202510041841.pRlunIfl-lkp@intel.com/
Fixes: 58c40f3faf ("mmc: pxamci: Use devm_mmc_alloc_host() helper")
Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the mmc controller in the Eswin EIC7700 with the new
compatible "eswin,eic7700-dwcmshc". Implement custom sdhci_ops for
set_clock, reset, set_uhs_signaling, platform_execute_tuning.
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In select_task_rq_dl, there is only one goto statement, there is no
need for it.
No functional changes.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20251014100342.978936-2-sshegde@linux.ibm.com
cpumask_subset(a,b) -> cpumask_weight(a) should be same as cpumask_weight_and(a,b)
for_each_cpu_and(a,b) to count cpus could be replaced by cpumask_weight_and(a,b)
No Functional Change. It could save a few cycles since cpumask_weight_and
would be more efficient. Plus one less stack variable.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20251014100342.978936-3-sshegde@linux.ibm.com
memblock_estimated_nr_free_pages() returns the difference between the total
size of the "memory" memblock type and the "reserved" memblock type.
The "soft-reserved" memory regions are added to the "reserved" memblock
type, but not to the "memory" memblock type. Therefore,
memblock_estimated_nr_free_pages() may return a smaller value than
expected, or if it underflows, an extremely large value.
/proc/sys/kernel/threads-max is determined by the value of
memblock_estimated_nr_free_pages(). This issue was discovered on machines
with CXL memory because kernel.threads-max was either smaller than expected
or extremely large for the installed DRAM size.
This fixes the issue by replacing memblock_reserved_size() with
memblock_reserved_kern_size() that tells how much memory was
reserved from the actual RAM.
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://patch.msgid.link/20251111010010.7800-1-akinobu.mita@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Since the maximum return value of strnlen(..., CIFS_MAX_USERNAME_LEN)
is CIFS_MAX_USERNAME_LEN, length check in smb3_fs_context_parse_param()
is always FALSE and invalid.
Fix the comparison in if statement.
Signed-off-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The i.MX8ULP System Integration Module (SIM) LPAV module is a block
control module found inside the LPAV subsystem, which offers some clock
gating options and reset line assertion/de-assertion capabilities.
Therefore, the clock gate management is supported by registering the
module's driver as a clock provider, while the reset capabilities are
managed via the auxiliary device API to allow the DT node to act as a
reset and clock provider.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-4-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add documentation for i.MX8ULP's SIM LPAV module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
When smb_direct_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smb_direct_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in free_transport() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.
So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: b3fd52a0d8 ("smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the 'mdt_loader.h' header, both the prototype and the inline
version of the qcom_mdt_load() function uses 'fw_name' as name for
the firmware name parameter. Additionally, the other qcom_mdt_*
functions are using that as well.
For consistency, rename the 'firmware' parameter in the implementation
of the qcom_mdt_load() to 'fw_name' and update the function accordingly.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-mdt-loader-cleanup-v1-2-71afee094dce@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcom_mdt_load_no_init() function is just a simple wrapper around
of __qcom_mdt_load(). Since commit 0daf35da39 ("soc: qcom: mdt_loader:
Remove pas id parameter") both functions are using the same type of
parameters and providing the same functionality.
Keeping two functions for the same purpose is superfluous, so rename
the __qcom_mdt_load() function to qcom_mdt_load_no_init() and remove
the wrapper.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-mdt-loader-cleanup-v1-1-71afee094dce@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Documentation build reported:
Warning: block/blk-mq-dma.c:373 expecting prototype for blk_rq_integrity_dma_map_iter_start(). Prototype was for blk_rq_integrity_dma_map_iter_next() instead
The kernel-doc comment above `blk_rq_integrity_dma_map_iter_next()` used
the wrong function name (`blk_rq_integrity_dma_map_iter_start`) in its
header. This patch corrects the function name in the kernel-doc block to
match the actual implementation, ensuring clean documentation builds.
Fixes: fec9b16dc5 ("blk-mq-dma: add scatter-less integrity data DMA mapping")
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The data segment gaps the block layer tracks doesn't apply to bio's that
don't have data. Skip calculating this to fix a NULL pointer access.
Fixes: 2f6b2565d4 ("block: accumulate memory segment gaps per bio")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 02f312754c ("ntfs3: fix use-after-free of sbi->options in cmp_fnames") introduced a use-after-free bug
due to improper handling of sbi->options in error paths. This resulted in crashes when superblock cleanup
is performed in ntfs_put_super.
This patch ensures that the options structure and its subfields are properly freed, preventing the memory
corruption and use-after-free errors.
Fixes: 02f312754c ("ntfs3: fix use-after-free of sbi->options in cmp_fnames")
Reported-by: syzbot+cc433e4cd6d54736bf80@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc433e4cd6d54736bf80
Signed-off-by: YangWen <anmuxixixi@gmail.com>
[almaz.alexandrovich@paragon-software.com: added fixes and closes tags]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Commit e26ee4efbc ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()).
Fixes: e26ee4efbc ("fuse: allocate ff->release_args only if release is needed")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use helper function devm_auxiliary_device_create() to remove some
boilerplate code.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20251024-auxiliary-v2-1-a353dc9e6b1a@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Some of the PCCs on i.MX8ULP have a sw_rst bit to control the peripheral
reset through SW method. For peripherals like GPU that need sync reset,
some delay is necessary befere & after release the reset to make sure the
HW is reset into a known status. So add some delay before & after release
reset.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250801072153.1974428-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
ublk_map_io() and ublk_unmap_io() never return negative values, and
their return values are stored in variables of type unsigned. Clarify
that they can't fail by making their return types unsigned.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ub = iocb->ki_filp->private_data cannot be NULL, as it's set in
ublk_ch_open() before it returns succesfully. req->mq_hctx cannot be
NULL as any inflight ublk request must belong to some queue. And
req->mq_hctx->driver_data cannot be NULL as it's set to the ublk_queue
pointer in ublk_init_hctx(). So drop the unnecessary checks.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_sanitise_params() sanitises most of the setup flags invariants,
move the IORING_SETUP_FLAGS check from io_uring_setup() into it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mem_is_zero() does the job without hand rolled loops, use that to verify
reserved fields of ring params.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to pass the user requested number of SQ entries
separately from the main parameter structure io_uring_params. Initialise
it at the beginning and stop passing it in favour of struct
io_uring_params::sq_entries.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There has been type related issues with region size calculation, add an
utility helper function that returns the size and handles type
conversions right.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having an array of a calculated size as a buffer, put all
query uapi structures into a union and pass that around. That way
everything is well typed, and the compiler will prevent opcode handling
using a structure not accounted into the buffer size.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
netdev ops must be called under instance lock or rtnl_lock, but
io_register_zcrx_ifq() isn't doing this for netdev_queue_get_dma_dev().
Fix this by taking the instance lock using netdev_get_by_index_lock().
Extended the instance lock section to include attaching a memory
provider. Could not move io_zcrx_create_area() outside, since the dmabuf
codepath IORING_ZCRX_AREA_DMABUF requires ifq->dev.
Fixes: 59b8b32ac8 ("io_uring/zcrx: add support for custom DMA devices")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Need to call netdev_get_by_index_lock() from io_uring/zcrx.c, but it is
currently private to net. Export the function in linux/netdevice.h.
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs.
Fixes: cdd04f4d4d ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For chips with security enabled, it's only possible to load firmware
with a valid signature pattern.
If key_id is not zero, it indicates a security chip, and the driver will
not load the config file.
- Example log for a security chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301
Bluetooth: hci0: RTL: fw version 0x41c0c905
- Example log for a normal chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 0
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307
Bluetooth: hci0: RTL: fw version 0x41c0c905
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Nial Ni <niall_ni@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>