Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes devlink_rate_tc_bw.py present in the Makefile under the same
directory.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-2-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- HCI: Add initial support for PAST
- hci_core: Introduce HCI_CONN_FLAG_PAST
- ISO: Add support to bind to trigger PAST
- HCI: Always use the identity address when initializing a connection
- ISO: Attempt to resolve broadcast address
- MGMT: Allow use of Set Device Flags without Add Device
- ISO: Fix not updating BIS sender source address
- HCI: Add support for LL Extended Feature Set
driver:
- btusb: Add new VID/PID 2b89/6275 for RTL8761BUV
- btusb: MT7920: Add VID/PID 0489/e135
- btusb: MT7922: Add VID/PID 0489/e170
- btusb: Add new VID/PID 13d3/3533 for RTL8821CE
- btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
- btusb: Reclassify Qualcomm WCN6855 debug packets
- btintel_pcie: Introduce HCI Driver protocol
- btintel_pcie: Support for S4 (Hibernate)
- btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling
- dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schema
- btbcm: Use kmalloc_array() to prevent overflow
- btrtl: Add the support for RTL8761CUV
- hci_h5: avoid sending two SYNC messages
- hci_h5: implement CRC data integrity
MAINTAINERS:
- Add Bartosz Golaszewski as Qualcomm hci_qca maintainer
-----BEGIN PGP SIGNATURE-----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=ndah
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- HCI: Add initial support for PAST
- hci_core: Introduce HCI_CONN_FLAG_PAST
- ISO: Add support to bind to trigger PAST
- HCI: Always use the identity address when initializing a connection
- ISO: Attempt to resolve broadcast address
- MGMT: Allow use of Set Device Flags without Add Device
- ISO: Fix not updating BIS sender source address
- HCI: Add support for LL Extended Feature Set
driver:
- btusb: Add new VID/PID 2b89/6275 for RTL8761BUV
- btusb: MT7920: Add VID/PID 0489/e135
- btusb: MT7922: Add VID/PID 0489/e170
- btusb: Add new VID/PID 13d3/3533 for RTL8821CE
- btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
- btusb: Reclassify Qualcomm WCN6855 debug packets
- btintel_pcie: Introduce HCI Driver protocol
- btintel_pcie: Support for S4 (Hibernate)
- btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling
- dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schema
- btbcm: Use kmalloc_array() to prevent overflow
- btrtl: Add the support for RTL8761CUV
- hci_h5: avoid sending two SYNC messages
- hci_h5: implement CRC data integrity
MAINTAINERS:
- Add Bartosz Golaszewski as Qualcomm hci_qca maintainer
* tag 'for-net-next-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (29 commits)
Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
Bluetooth: HCI: Add support for LL Extended Feature Set
drivers/bluetooth: btbcm: Use kmalloc_array() to prevent overflow
Bluetooth: btintel_pcie: Introduce HCI Driver protocol
Bluetooth: btusb: add new custom firmwares
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Bluetooth: iso: fix socket matching ambiguity between BIS and CIS
Bluetooth: MAINTAINERS: Add Bartosz Golaszewski as Qualcomm hci_qca maintainer
Bluetooth: btrtl: Add the support for RTL8761CUV
Bluetooth: Remove redundant pm_runtime_mark_last_busy() calls
dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schema
Bluetooth: btusb: Reclassify Qualcomm WCN6855 debug packets
Bluetooth: btusb: Add new VID/PID 2b89/6275 for RTL8761BUV
Bluetooth: btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling
Bluetooth: btintel_pcie: Support for S4 (Hibernate)
Bluetooth: btusb: MT7922: Add VID/PID 0489/e170
Bluetooth: btusb: MT7920: Add VID/PID 0489/e135
Bluetooth: ISO: Fix not updating BIS sender source address
...
====================
Link: https://patch.msgid.link/20251201213818.97249-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the napi functions napi_alloc_skb() and napi_gro_receive() instead
of netdev_alloc_skb() and netif_receive_skb() for more efficient packet
receiving. The switch to napi aware functions increases the RX
throughput, reduces the occurrence of retransmissions and improves the
resilience against SKB allocation failures.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251130194155.1950980-1-fuchsfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
DSA simple HSR offload
Provide a "simple" form of HSR offload for 8 DSA drivers (just the
NETIF_F_HW_HSR_DUP feature) based on the fact that their taggers use the
dsa_xmit_port_mask() function. This is in patches 6-13/15.
The helpers per se are introduced in patch 5/15, and documented in patch
15/15. Patch 14/15 is another small (and related) documentation update.
For HSR interlink ports the offloading rules are not quite so clear, and
for now we completely reject the offload. We can revise that once we see
a full offload implementation and understand what is needed.
To reject the offload, we need to know the port type, and patch 2/15
helps with that.
xrs700x is another driver which should have rejected offload based on
port type (patch 4/15). This is a bug fix submitted through net-next due
to the extra API required to fix it. If necessary, it could also be
picked up separately for backporting.
There is also patch 3/15, which makes the HSR offload like the others
supported by DSA: if we fall back to the software implementation, don't
call port_hsr_leave(), because by definition there won't be anything to
do.
A slightly unrelated change is patch 1/15, but I noticed this along the
way, and if I were to submit it separately, it would conflict with this
work (it would appear in patch 12/15's context).
Most of the driver additions are trivial. By far the most complex was
ocelot (which I could test). Microchip ksz (which I cannot test, and did
not patch) would also have some complexity. Essentially, ksz_hsr_join()
could fall back to a partial offload through the simple helpers, if the
full offload is not possible. But keeping track of which offload kind
was used is necessary later in ksz_hsr_leave(). This is left as homework
for interested developers.
With this patch set, one can observe a 50% reduction in transmitted
traffic over HSR interfaces.
====================
Link: https://patch.msgid.link/20251130131657.65080-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 5055cccfc2 ("net: hsr: Provide RedBox support
(HSR-SAN)"), RedBox is available (including for offload in DSA).
Update the DSA documentation that states it isn't.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-15-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "a5psw" tagging protocol uses dsa_xmit_port_mask(), which means
we can offload HSR packet duplication on transmit. Enable that feature.
Cc: "Clément Léger" <clement.leger@bootlin.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-14-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "mtk" tagging protocol uses dsa_xmit_port_mask(), which means we can
offload HSR packet duplication on transmit. Enable that feature.
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20251130131657.65080-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "hellcreek" tagging protocol uses dsa_xmit_port_mask(), which means
we can offload HSR packet duplication on transmit. Enable that feature.
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "trailer" tagging protocol uses dsa_xmit_port_mask(), which means we
can offload HSR packet duplication on transmit. Enable that feature.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both the "gswip" and "gsw1xx" protocols use dsa_xmit_port_mask(), so
they are compatible with accelerating TX packet duplication for HSR
rings.
Enable that feature by setting the port_hsr_join() and port_hsr_leave()
operations to the simple helpers provided by DSA.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All known Realtek protocols: "rtl4a", "rtl8_4" and "rtl8_4t" use
dsa_xmit_port_mask(), so they are compatible with accelerating TX packet
duplication for HSR rings.
Enable that feature by setting the port_hsr_join() and port_hsr_leave()
operations to the simple helpers provided by DSA.
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251130131657.65080-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accelerate TX packet duplication with HSR rings.
This is only possible with the NPI-based "ocelot" tagging protocol, not
with "ocelot-8021q", because the latter does not use dsa_xmit_port_mask().
This has 2 implications:
- Depending on tagging protocol, we should set (or not set) the offload
feature flags. Switching tagging protocols is done with ports down, by
design. Additional calls to dsa_port_simple_hsr_join() can be put in
the ds->ops->change_tag_protocol() path, as I had originally tried,
but this would not work: dsa_user_setup_tagger() would later clear
the feature flag that we just set. So the additional call to
dsa_port_simple_hsr_join() should sit in the ds->ops->port_enable()
call.
- When joining a HSR ring and we are currently using "ocelot-8021q",
there are cases when we should return -EOPNOTSUPP (pessimistic) and
cases when we shouldn't (optimistic). In the pessimistic case, it is a
configuration that the port won't support even with the right tagging
protocol. Distinguishing between these 2 cases matters because if we
just return -EOPNOTSUPP regardless, we lose the dp->hsr_dev pointer
and can no longer replay the offload later for the optimistic case,
from felix_port_enable().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns out that HSR offloads are so fine-grained that many DSA
switches can do a small part even though they weren't specifically
designed for the protocols supported by that driver (HSR and PRP).
Specifically NETIF_F_HW_HSR_DUP - it is simple packet duplication on
transmit, towards all (aka 2) ports members of the HSR device.
For many DSA switches, we know how to duplicate a packet, even though we
never typically use that feature. The transmit port mask from the
tagging protocol can have multiple bits set, and the switch should send
the packet once to every port with a bit set from that mask.
Nonetheless, not all tagging protocols are like this, and sometimes the
port is a single numeric value rather than a bit mask. For that reason,
and also because switches can sometimes change tagging protocols for
different ones, we need to make HSR offload helpers opt-in.
For devices that can do nothing else HSR-specific, we introduce
dsa_port_simple_hsr_join() and dsa_port_simple_hsr_leave(). These
functions monitor when two user ports of the same switch are part of the
same HSR device, and when that condition is true, they toggle the
NETIF_F_HW_HSR_DUP feature flag of both net devices.
Normally only dsa_port_simple_hsr_join() and dsa_port_simple_hsr_leave()
are needed. The dsa_port_simple_hsr_validate() helper is just to see
what kind of configuration could be offloadable using the generic
helpers. This is used by switch drivers which are not currently using
the right tagging protocol to offload this HSR ring, but could in
principle offload it after changing the tagger.
Suggested-by: David Yang <mmyangfl@gmail.com>
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Cc: Chester A. Unal" <chester.a.unal@arinc9.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As discussed here:
https://lore.kernel.org/netdev/20240620090210.drop6jwh7e5qw556@skbuf/
the fact is that the xrs700x.c driver only supports offloading
HSR_PT_SLAVE_A and HSR_PT_SLAVE_B (which were the only port types at the
time the offload was written, _for this driver_).
Up until now, the API did not explicitly tell offloading drivers what
port has what role. So xrs700x can get confused and think that it can
support a configuration which it actually can't. There was a table in
the attached link which gave an example:
$ ip link add name hsr0 type hsr slave1 swp0 slave2 swp1 \
interlink swp2 supervision 45 version 1
HSR_PT_SLAVE_A HSR_PT_SLAVE_B HSR_PT_INTERLINK
----------------------------------------------------------------
user
space 0 1 2
requests
----------------------------------------------------------------
XRS700X
driver 1 2 -
understands
The switch would act as if the ring ports were swp1 and swp2.
Now that we have explicit hsr_get_port_type() API, let's use that to
work around the unintended semantical changes of the offloading API
brought by the introduction of interlink ports in HSR.
Fixes: 5055cccfc2 ("net: hsr: Provide RedBox support (HSR-SAN)")
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Link: https://patch.msgid.link/20251130131657.65080-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This mirrors what we do in dsa_port_lag_leave() and
dsa_port_bridge_leave(): when ds->ops->port_hsr_join() returns
-EOPNOTSUPP, we fall back to a software implementation where dp->hsr_dev
is NULL, and the unoffloaded port is no longer bothered with calls from
the HSR layer.
This helps, for example, with interlink ports which current DSA drivers
don't know how to offload. We have to check only in port_hsr_join() for
the port type, then in port_hsr_leave() we are sure we're dealing only
with known port types.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251130131657.65080-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the introduction of HSR_PT_INTERLINK in commit 5055cccfc2 ("net:
hsr: Provide RedBox support (HSR-SAN)"), we see that different port
types require different settings for hardware offload, which was not the
case before when we only had HSR_PT_SLAVE_A and HSR_PT_SLAVE_B. But
there is currently no way to know which port is which type, so create
the hsr_get_port_type() API function and export it.
When hsr_get_port_type() is called from the device driver, the port can
must be found in the HSR port list. An important use case is for this
function to work from offloading drivers' NETDEV_CHANGEUPPER handler,
which is triggered by hsr_portdev_setup() -> netdev_master_upper_dev_link().
Therefore, we need to move the addition of the hsr_port to the HSR port
list prior to calling hsr_portdev_setup(). This makes the error
restoration path also more similar to hsr_del_port(), where
kfree_rcu(port) is already used.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Link: https://patch.msgid.link/20251130131657.65080-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit cb675afcdd ("net: dsa: mt7530: introduce separate MDIO driver")
exported mt7530_switch_ops for use from mt7530-mmio.c. Later in the
patch set, mt7530-mmio.c used mt7530_probe_common() to access the
mt7530_switch_ops still from mt7530.c - see commit 110c18bfed ("net:
dsa: mt7530: introduce driver for MT7988 built-in switch").
This proves that exporting mt7530_switch_ops was unnecessary, so
unexport it back.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20251130131657.65080-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
ov48AP4qgtSo78euYDtsxkgU1IKRow1Hc3L/rql6uIP7dFtQ8AEAjZjCMK3vDSZy
DUqStlgPZ3/GWyzdnDKOoAuwvn56gQQ=
=KElr
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull autofs update from Christian Brauner:
"Prevent futile mount triggers in private mount namespaces.
Fix a problematic loop in autofs when a mount namespace contains
autofs mounts that are propagation private and there is no
namespace-specific automount daemon to handle possible automounting.
Previously, attempted path resolution would loop until MAXSYMLINKS was
reached before failing, causing significant noise in the log.
The fix adds a check in autofs ->d_automount() so that the VFS can
immediately return EPERM in this case. Since the mount is propagation
private, EPERM is the most appropriate error code"
* tag 'vfs-6.19-rc1.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
autofs: dont trigger mount if it cant succeed
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
othbAP97FNSOMUMAXTUxocE7vMgq3B/MG54e22ZrYhnZeP8NsgEA3zo4GpPCeM0p
e8EjiLz0wUlveF68MZUg52eXT5/nTAE=
=tbY/
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull overlayfs cred guard conversion from Christian Brauner:
"This converts all of overlayfs to use credential guards, eliminating
manual credential management throughout the filesystem.
Credential guard conversion:
- Convert all of overlayfs to use credential guards, replacing the
manual ovl_override_creds()/ovl_revert_creds() pattern with scoped
guards.
This makes credential handling visually explicit and eliminates a
class of potential bugs from mismatched override/revert calls.
(1) Basic credential guard (with_ovl_creds)
(2) Creator credential guard (ovl_override_creator_creds):
Introduced a specialized guard for file creation operations
that handles the two-phase credential override (mounter
credentials, then fs{g,u}id override). The new pattern is much
clearer:
with_ovl_creds(dentry->d_sb) {
scoped_class(prepare_creds_ovl, cred, dentry, inode, mode) {
if (IS_ERR(cred))
return PTR_ERR(cred);
/* creation operations */
}
}
(3) Copy-up credential guard (ovl_cu_creds):
Introduced a specialized guard for copy-up operations,
simplifying the previous struct ovl_cu_creds helper and
associated functions.
Ported ovl_copy_up_workdir() and ovl_copy_up_tmpfile() to this
pattern.
Cleanups:
- Remove ovl_revert_creds() after all callers converted to guards
- Remove struct ovl_cu_creds and associated functions
- Drop ovl_setup_cred_for_create() after conversion
- Refactor ovl_fill_super(), ovl_lookup(), ovl_iterate(),
ovl_rename() for cleaner credential guard scope
- Introduce struct ovl_renamedata to simplify rename handling
- Don't override credentials for ovl_check_whiteouts() (unnecessary)
- Remove unneeded semicolon"
* tag 'vfs-6.19-rc1.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (54 commits)
ovl: remove unneeded semicolon
ovl: remove struct ovl_cu_creds and associated functions
ovl: port ovl_copy_up_tmpfile() to cred guard
ovl: mark *_cu_creds() as unused temporarily
ovl: port ovl_copy_up_workdir() to cred guard
ovl: add copy up credential guard
ovl: drop ovl_setup_cred_for_create()
ovl: port ovl_create_or_link() to new ovl_override_creator_creds cleanup guard
ovl: mark ovl_setup_cred_for_create() as unused temporarily
ovl: reflow ovl_create_or_link()
ovl: port ovl_create_tmpfile() to new ovl_override_creator_creds cleanup guard
ovl: add ovl_override_creator_creds cred guard
ovl: remove ovl_revert_creds()
ovl: port ovl_fill_super() to cred guard
ovl: refactor ovl_fill_super()
ovl: port ovl_lower_positive() to cred guard
ovl: port ovl_lookup() to cred guard
ovl: refactor ovl_lookup()
ovl: port ovl_copyfile() to cred guard
ovl: port ovl_rename() to cred guard
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
op9tAQCJ//STOkvYHfqgsdRD+cW9MRg/gPzfVZgnV1FTyf8sMgEA0IsY5zCZB9eh
9FdD0E57P8PlWRwWZ+LktnWBzRAUqwI=
=MOVR
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory locking updates from Christian Brauner:
"This contains the work to add centralized APIs for directory locking
operations.
This series is part of a larger effort to change directory operation
locking to allow multiple concurrent operations in a directory. The
ultimate goal is to lock the target dentry(s) rather than the whole
parent directory.
To help with changing the locking protocol, this series centralizes
locking and lookup in new helper functions. The helpers establish a
pattern where it is the dentry that is being locked and unlocked
(currently the lock is held on dentry->d_parent->d_inode, but that can
change in the future).
This also changes vfs_mkdir() to unlock the parent on failure, as well
as dput()ing the dentry. This allows end_creating() to only require
the target dentry (which may be IS_ERR() after vfs_mkdir()), not the
parent"
* tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nfsd: fix end_creating() conversion
VFS: introduce end_creating_keep()
VFS: change vfs_mkdir() to unlock on failure.
ecryptfs: use new start_creating/start_removing APIs
Add start_renaming_two_dentries()
VFS/ovl/smb: introduce start_renaming_dentry()
VFS/nfsd/ovl: introduce start_renaming() and end_renaming()
VFS: add start_creating_killable() and start_removing_killable()
VFS: introduce start_removing_dentry()
smb/server: use end_removing_noperm for for target of smb2_create_link()
VFS: introduce start_creating_noperm() and start_removing_noperm()
VFS/nfsd/cachefiles/ovl: introduce start_removing() and end_removing()
VFS/nfsd/cachefiles/ovl: add start_creating() and end_creating()
VFS: tidy up do_unlinkat()
VFS: introduce start_dirop() and end_dirop()
debugfs: rename end_creating() to debugfs_end_creating()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZgAKCRCRxhvAZXjc
ooiEAPwNZfkqiSs6G1B2EmjFpMrA2BDqskaOsnN2sywra0sNewD9EQxJwlYXUn+z
nNUIAvmegJGg2OiU2UaNGwxMR3lR3w8=
=YELr
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory delegations update from Christian Brauner:
"This contains the work for recall-only directory delegations for
knfsd.
Add support for simple, recallable-only directory delegations. This
was decided at the fall NFS Bakeathon where the NFS client and server
maintainers discussed how to merge directory delegation support.
The approach starts with recallable-only delegations for several reasons:
1. RFC8881 has gaps that are being addressed in RFC8881bis. In
particular, it requires directory position information for
CB_NOTIFY callbacks, which is difficult to implement properly
under Linux. The spec is being extended to allow that information
to be omitted.
2. Client-side support for CB_NOTIFY still lags. The client side
involves heuristics about when to request a delegation.
3. Early indication shows simple, recallable-only delegations can
help performance. Anna Schumaker mentioned seeing a multi-minute
speedup in xfstests runs with them enabled.
With these changes, userspace can also request a read lease on a
directory that will be recalled on conflicting accesses. This may be
useful for applications like Samba. Users can disable leases
altogether via the fs.leases-enable sysctl if needed.
VFS changes:
- Dedicated Type for Delegations
Introduce struct delegated_inode to track inodes that may have
delegations that need to be broken. This replaces the previous
approach of passing raw inode pointers through the delegation
breaking code paths, providing better type safety and clearer
semantics for the delegation machinery.
- Break parent directory delegations in open(..., O_CREAT) codepath
- Allow mkdir to wait for delegation break on parent
- Allow rmdir to wait for delegation break on parent
- Add try_break_deleg calls for parents to vfs_link(), vfs_rename(),
and vfs_unlink()
- Make vfs_create(), vfs_mknod(), and vfs_symlink() break delegations
on parent directory
- Clean up argument list for vfs_create()
- Expose delegation support to userland
Filelock changes:
- Make lease_alloc() take a flags argument
- Rework the __break_lease API to use flags
- Add struct delegated_inode
- Push the S_ISREG check down to ->setlease handlers
- Lift the ban on directory leases in generic_setlease
NFSD changes:
- Allow filecache to hold S_IFDIR files
- Allow DELEGRETURN on directories
- Wire up GET_DIR_DELEGATION handling
Fixes:
- Fix kernel-doc warnings in __fcntl_getlease
- Add needed headers for new struct delegation definition"
* tag 'vfs-6.19-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: add needed headers for new struct delegation definition
filelock: __fcntl_getlease: fix kernel-doc warnings
vfs: expose delegation support to userland
nfsd: wire up GET_DIR_DELEGATION handling
nfsd: allow DELEGRETURN on directories
nfsd: allow filecache to hold S_IFDIR files
filelock: lift the ban on directory leases in generic_setlease
vfs: make vfs_symlink break delegations on parent dir
vfs: make vfs_mknod break delegations on parent directory
vfs: make vfs_create break delegations on parent directory
vfs: clean up argument list for vfs_create()
vfs: break parent dir delegations in open(..., O_CREAT) codepath
vfs: allow rmdir to wait for delegation break on parent
vfs: allow mkdir to wait for delegation break on parent
vfs: add try_break_deleg calls for parents to vfs_{link,rename,unlink}
filelock: push the S_ISREG check down to ->setlease handlers
filelock: add struct delegated_inode
filelock: rework the __break_lease API to use flags
filelock: make lease_alloc() take a flags argument
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZgAKCRCRxhvAZXjc
olEcAP4qG313oT/tm4W3nC4g2k8S//KqET97B80pSX0K3DvQEwD+LSCf1Th3RnsV
EAMHczmCtRlbcFPqYOFVAMS8VxOyVg0=
=7Ca4
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.minix' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull minix fixes from Christian Brauner:
"Fix two syzbot corruption bugs in the minix filesystem.
Syzbot fuzzes filesystems by trying to mount and manipulate
deliberately corrupted images. This should not lead to BUG_ONs and
WARN_ONs for easy to detect corruptions.
- Add error handling to minix filesystem for inode corruption
detection, enabling the filesystem to report such corruptions
cleanly.
- Fix a drop_nlink warning in minix_rmdir() triggered by corrupted
directory link counts.
- Fix a drop_nlink warning in minix_rename() triggered by corrupted
inode link counts"
* tag 'vfs-6.19-rc1.minix' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Fix a drop_nlink warning in minix_rename
Fix a drop_nlink warning in minix_rmdir
Add error handling to minix filesystem for inode corruption detection
Support for STP/MST was deferred from the initial submission of the
driver.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251201094232.3155105-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VLAN_CTRL should be treated as a 64-bit register. GENMASK and BIT
macros use unsigned long as the underlying type, which will result in a
build error on architectures where sizeof(long) == 4.
Replace them with unsigned long long variants.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251201094232.3155105-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parthiban Veerasooran says:
====================
Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver
This patch series adds Signal Quality Indicator (SQI) and enhanced SQI+
support for OATC14 10Base-T1S PHYs, along with integration into the
Microchip T1S PHY driver. This enables ethtool to report the SQI value for
OATC14 10Base-T1S PHYs.
====================
Link: https://patch.msgid.link/20251201032346.6699-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Signal Quality Index (SQI) reporting in the
Microchip T1S PHY driver for LAN867x Rev.D0 (OATC14-compliant) PHYs.
This patch registers the following callbacks in the microchip_t1s driver
structure:
- .get_sqi - returns the current SQI value
- .get_sqi_max - returns the maximum SQI value
This enables ethtool to report the SQI value for LAN867x Rev.D0 PHYs.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251201032346.6699-3-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reading Signal Quality Indicator (SQI) and enhanced SQI+
from OATC14 10Base-T1S PHYs.
- Introduce MDIO register definitions for DCQ_SQI and DCQ_SQIPLUS.
- Add `genphy_c45_oatc14_get_sqi_max()` to return the maximum supported
SQI/SQI+ level.
- Add `genphy_c45_oatc14_get_sqi()` to return the current SQI or SQI+
value.
- Update `include/linux/phy.h` to expose the new APIs.
SQI+ capability is read from the Advanced Diagnostic Features Capability
register (ADFCAP). If SQI+ is supported, the driver calculates the value
from the MSBs of the DCQ_SQIPLUS register; otherwise, it falls back to
basic SQI (0-7 levels). This enables ethtool to report the SQI value for
OATC14 10Base-T1S PHYs.
Open Alliance TC14 10BASE-T1S Advanced Diagnostic PHY Features
Specification ref:
https://opensig.org/wp-content/uploads/2025/06/OPEN_Alliance_10BASE-T1S_Advanced_PHY_features_for-automotive_Ethernet_V2.1b.pdf
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251201032346.6699-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5e: Enhance DCBNL get/set maxrate code
This series by Gal introduces multiple small code quality improvements
for the DCBNL operations mlx5e_dcbnl_ieee_[gs]etmaxrate().
No functional change.
====================
Link: https://patch.msgid.link/1764498334-1327918-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MLX5E_100MB and MLX5E_1GB defines are confusing, MLX5E_100MB is not
equal to 100 * MEGA, and MLX5E_1GB is not equal to one GIGA, as they
hide the Kbps rate conversion required for ieee_maxrate.
Replace hardcoded bandwidth conversion values with standard unit
definitions from linux/units.h. Rename MLX5E_100MB/MLX5E_1GB to
MLX5E_100MB_TO_KB/MLX5E_1GB_TO_KB to clarify these are conversion
factors to Kbps, not absolute bandwidth values.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1764498334-1327918-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace hard coded 255 magic number with U8_MAX (the register field is 8
bits).
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1764498334-1327918-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clarify that the limit represents the threshold for using 100 Mbps
units rather than a general Mbps limit.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1764498334-1327918-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski says:
====================
net: dsa: b53: fix ARL accesses for BCM5325/65 and allow VID 0
ARL entries on BCM5325 and BCM5365 were broken significantly in two
ways:
- Entries for the CPU port were using the wrong port id, pointing to a
non existing port.
- Setting the VLAN ID for entries was not done, adding them all to VLAN
0 instead.
While the former technically broke any communication to the CPU port,
with the latter they were added to the currently unused VID 0, so they
never became effective. Presumably the default PVID was set to 1 because
of these issues 0 was broken (and the root cause not found).
So fix writing and reading entries on BCM5325/65 by first fixing the CPU
port entries, then fixing setting the VLAN ID for entries.
Finally, re-allow VID 0 for BCM5325/65 to allow the whole 1-15 VLAN ID
range to be available to users, and align VLAN handling with all other
switch chips.
====================
Link: https://patch.msgid.link/20251128080625.27181-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that writing ARL entries works properly, we can actually use VID 0
as the default untagged VLAN for BCM5325 and BCM5365 as well.
So use 0 as default PVID for all chips and do not reject VLAN 0 anymore,
which we ignored since commit 45e9d59d39 ("net: dsa: b53: do not allow
to configure VLAN 0") anyway.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251128080625.27181-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM5325/65's ARL entry registers do not contain the VID, only the search
result register does. ARL entries have a separate VID entry register for
the index into the VLAN table.
So make ARL entry accessors use the VID entry registers instead, and
move the VLAN ID field definition to the search register definition.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251128080625.27181-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We currently use the mask 0xf for writing and reading b53_entry::port,
but this is only correct for unicast ARL entries. Multicast ARL entries
use a bitmask, and 0xf is not enough space for ports > 3, which includes
the CPU port.
So extend the mask accordingly to also fit port 4 (bit 4) and MII (bit
5). According to the datasheet the multicast port mask is [60:48],
making it 12 bit wide, but bits 60-55 are reserved anyway, and collide
with the priority field at [60:59], so I am not sure if this is valid.
Therefore leave it at the actual used range, [53:48].
The ARL search result register differs a bit, and there the mask is only
[52:48], so only spanning the user ports. The MII port bit is
contained in the Search Result Extension register. So create a separate
search result parse function that properly handles this.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On BCM5325 and BCM5365, unicast ARL entries use 8 as the value for the
CPU port, so we need to translate it to/from 5 as used for the CPU port
at most other places.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251128080625.27181-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM5365's search result is at the same offset as BCM5325's search
result, and they (mostly) share the same format, so switch BCM5365 to
BCM5325's arl ops.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM5325/65's Entry register uses the highest three bits for
VALID/STATIC/AGE, so shifting by 53 only will add these to
b53_arl_entry::vid.
So make sure to mask the vid value as well, to not get invalid VIDs.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since BCM5325 and BCM5365 only support up to 256 VLANs, the VLAN_ID_IDX
register is only 8 bit wide, not 16 bit, so use an appropriate accessor.
Fixes: c45655386e ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZgAKCRCRxhvAZXjc
opxBAQCjNjr0yTSoaGRM0CJXg79Of3DLIlBdB7TygibTN16WhwEA+VKWoHL5eRjg
PZlwZD4Ei2ymeQYxi+6owTF8G806tAs=
=m/Bt
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.guards' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock lock guard updates from Christian Brauner:
"This starts the work of introducing guards for superblock related
locks.
Introduce super_write_guard for scoped superblock write protection.
This provides a guard-based alternative to the manual sb_start_write()
and sb_end_write() pattern, allowing the compiler to automatically
handle the cleanup"
* tag 'vfs-6.19-rc1.guards' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: use super write guard in xfs_file_ioctl()
open: use super write guard in do_ftruncate()
btrfs: use super write guard in relocating_repair_kthread()
ext4: use super write guard in write_mmp_block()
btrfs: use super write guard in sb_start_write()
btrfs: use super write guard btrfs_run_defrag_inode()
btrfs: use super write guard in btrfs_reclaim_bgs_work()
fs: add super_write_guard
Raju Rangoju says:
====================
amd-xgbe: schedule NAPI on RBU event
During the RX overload the Rx buffers may not be refilled, trying to
schedule the NAPI when an Rx Buffer Unavailable is signaled may help in
improving the such situation, in case we missed an IRQ.
====================
Link: https://patch.msgid.link/20251129175016.3034185-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Under heavy load, Rx Buffer Unavailable (RBU) can occur if Rx processing
is slower than network. When an RBU is signaled, try to schedule NAPI to
help recover from such situation (including cases where an IRQ may be
missed or such)
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20251129175016.3034185-3-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
