When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .
It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.
We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.
Fixes: d56de8c9a1 ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list of Huawei LTE modules needing the quirk fixing spurious wakeups
was missing the IDs of the Huawei ME906S module, therefore suspend did not
work.
Cc: stable <stable@kernel.org>
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the check on the maximum transfer length in Raw Gadget for both
control and non-control transfers.
Limiting the transfer length causes a problem with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length.
Overall, there does not appear to be any reason to enforce any kind of
transfer length limit on the Raw Gadget side for either control or
non-control transfers, so let's just drop the related check.
Cc: stable <stable@kernel.org>
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The email forwarder I'm using has run into severe problems with Gmail
lately. Switch over to my kernel.org address for kernel development.
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020045603.2573544-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Move the print before releasing the delayed node.
In my initial testing there was a bug that was causing delayed_nodes
to not get freed which is why I put the print after the release. This
obviously neglects the case where the delayed node is properly freed.
Add condition to make sure we only print if we have more than one
reference to the delayed_node to prevent printing when we only have
the reference taken in btrfs_kill_all_delayed_nodes().
Fixes: b767a28d61 ("btrfs: print leaked references in kill_all_delayed_nodes()")
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This controller can have both bridges and panels connected to it. In
order to describe panels properly in DT, pull in dsi-controller.yaml
and disallow only unevaluatedProperties, because the panel node is
optional. Include example binding with panel.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250904210147.186728-4-marek.vasut+renesas@mailbox.org
The direction of the IDIO-16 GPIO lines is fixed with the first 16 lines
as output and the remaining 16 lines as input. Set the gpio_config
fixed_direction_output member to represent the fixed direction of the
GPIO lines.
Fixes: db02247827 ("gpio: idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Michael Walle <mwalle@kernel.org>
Cc: stable@vger.kernel.org # ae495810cf: gpio: regmap: add the .fixed_direction_output configuration parameter
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-3-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently, RISC-V lacks arch-specific registers for CPU topology
properties and must get them from ACPI. Thus, parse_acpi_topology()
is moved from arm64/ to drivers/ for RISC-V reuse.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20250923015409.15983-2-cuiyunhui@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace deprecated simple_strtol() calls with kstrtoint() in
timeout_store() and firmware_loading_store() functions to
improve input validation and error handling. The simple_strtol()
function does not provide proper error checking for invalid input,
while kstrtoint() returns an error for malformed strings.
This change adds proper validation for user input from sysfs attributes,
returning -EINVAL for invalid numeric strings instead of silently accepting
potentially malformed input. The behavior for valid numeric input remains
unchanged.
The simple_strtol() function is deprecated in favor of kstrtoint() family
functions which provide better error handling and are recommended for new
code and replacements.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20250925063812.2269501-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cancel_store() function currently calls the firmware upload cancel
operation even when no upload is in progress (i.e., when progress is
FW_UPLOAD_PROG_IDLE).
Update cancel_store() to only invoke the cancel operation when an upload
is active. If the upload is idle, return -ENODEV without calling cancel.
This change improves safety and correctness by ensuring driver operations
are only called in valid states.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20250925054129.2199157-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().
Cc: stable <stable@kernel.org>
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: b8fe128dad ("arch_topology: Adjust initial CPU capacities with current freq")
Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The early error path in hdm_probe() can jump to err_free_mdev before
&mdev->dev has been initialized with device_initialize(). Calling
put_device(&mdev->dev) there triggers a device core WARN and ends up
invoking kref_put(&kobj->kref, kobject_release) on an uninitialized
kobject.
In this path the private struct was only kmalloc'ed and the intended
release is effectively kfree(mdev) anyway, so free it directly instead
of calling put_device() on an uninitialized device.
This removes the WARNING and fixes the pre-initialization error path.
Fixes: 97a6f772f3 ("drivers: most: add USB adapter driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20251010105241.4087114-3-Victoria.Votokina@kaspersky.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.
The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).
Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().
This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below.
Reported-by: syzbot+916742d5d24f6c254761@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=916742d5d24f6c254761
Fixes: 97a6f772f3 ("drivers: most: add USB adapter driver")
Signed-off-by: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20251010105241.4087114-2-Victoria.Votokina@kaspersky.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no scenarios where a weak increment is invalid on binder_node.
The only possible case where it could be invalid is if the kernel
delivers BR_DECREFS to the process that owns the node, and then
increments the weak refcount again, effectively "reviving" a dead node.
However, that is not possible: when the BR_DECREFS command is delivered,
the kernel removes and frees the binder_node. The fact that you were
able to call binder_inc_node_nilocked() implies that the node is not yet
destroyed, which implies that BR_DECREFS has not been delivered to
userspace, so incrementing the weak refcount is valid.
Note that it's currently possible to trigger this condition if the owner
calls BINDER_THREAD_EXIT while node->has_weak_ref is true. This causes
BC_INCREFS on binder_ref instances to fail when they should not.
Cc: stable@vger.kernel.org
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Reported-by: Yu-Ting Tseng <yutingtseng@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251015-binder-weak-inc-v1-1-7914b092c371@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mei_register() should move before the mei_start() for hook
on class device to work.
Same change was implemented in mei-me, missed from mei-txe.
Fixes: 7704e6be4e ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251019073659.2646791-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_buf_munge() function performs a modulo operation
`async->munge_chan %= async->cmd.chanlist_len` without first
checking if chanlist_len is zero. If a user program submits a command with
chanlist_len set to zero, this causes a divide-by-zero error when the device
processes data in the interrupt handler path.
Add a check for zero chanlist_len at the beginning of the
function, similar to the existing checks for !map and
CMDF_RAWDATA flag. When chanlist_len is zero, update
munge_count and return early, indicating the data was
handled without munging.
This prevents potential kernel panics from malformed user commands.
Reported-by: syzbot+f6c3c066162d2c43a66c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f6c3c066162d2c43a66c
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20250924102639.1256191-1-kartikey406@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new mei late binding code
originating from the type parameter of mei_lb_push_payload():
drivers/misc/mei/mei_lb.c:211:18: error: incompatible function pointer types initializing 'int (*)(struct device *, u32, u32, const void *, size_t)' (aka 'int (*)(struct device *, unsigned int, unsigned int, const void *, unsigned long)') with an expression of type 'int (struct device *, enum intel_lb_type, u32, const void *, size_t)' (aka 'int (struct device *, enum intel_lb_type, unsigned int, const void *, unsigned long)') [-Werror,-Wincompatible-function-pointer-types-strict]
211 | .push_payload = mei_lb_push_payload,
| ^~~~~~~~~~~~~~~~~~~
While 'unsigned int' and 'enum intel_lb_type' are ABI compatible, hence
no regular warning from -Wincompatible-function-pointer-types, the
mismatch will trigger a kCFI violation when mei_lb_push_payload() is
called indirectly.
Update the type parameter of mei_lb_push_payload() to be 'u32' to match
the prototype in 'struct intel_lb_component_ops', clearing up the
warning and kCFI violation.
Fixes: 741eeabb7c ("mei: late_bind: add late binding component driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250920-drm-xe-fix-wifpts-v1-1-c89b5357c7ba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to
the dma_buf for comparison purposes. However, this reference is never
released when the function returns, leading to a dma_buf memory leak.
Fix this by adding dma_buf_put before returning from the function,
ensuring that the temporarily acquired reference is properly released
regardless of whether a matching map is found.
Fixes: 9031626ade ("misc: fastrpc: Fix fastrpc_map_lookup operation")
Cc: stable@kernel.org
Signed-off-by: Junhao Xie <bigfoot@radxa.com>
Tested-by: Xilin Wu <sophon@radxa.com>
Rule: add
Link: https://lore.kernel.org/stable/48B368FB4C7007A7%2B20251017083906.3259343-1-bigfoot%40radxa.com
Link: https://patch.msgid.link/48B368FB4C7007A7+20251017083906.3259343-1-bigfoot@radxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nvmem-rcar-efuse driver can be compiled as a module. Add missing
MODULE_DEVICE_TABLE so it can be matched by modalias and automatically
loaded by udev.
Cc: stable@vger.kernel.org
Fixes: 1530b923a5 ("nvmem: Add R-Car E-FUSE driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250919142856.2313927-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: d57801c45f ("uio: uio_fsl_elbc_gpcm: use device-managed allocators")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20251015064020.56589-1-liqiang01@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- MCAMSR protocol for revision 0x21 is updated to include the
extended thread supported by the platform.
- This modifies the existing protocol to include additional byte
to provide high thread number.
- New input structure is defined to address this, as the hardware
protocol is tightly coupled with the input structure length
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-6-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- CPUID protocol for revision 0x21 is updated to include the
extended thread supported by the platform.
- This modifies the existing protocol to include additional byte
to provide high thread number.
- New input structure is defined to address this, as the hardware
protocol is tightly coupled with the input structure length
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-5-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- CPUID and MCAMSR protocol for newer platform with revision
0x21 and later is modified as per two byte register address size.
- Modify the CPUID and MCAMSR protocol to return error, "-EOPNOTSUPP",
for revision 0x21.
- Next set of patches will add support for CPUID and MCAMSR for Turin and
later platforms.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-4-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- RMI registers addresses in AMD new platforms are 2 bytes,
on previous processors the address size is 1 byte.
- Implement logic to identify register address size at runtime.
- The identification is done in first transaction using the
Revision register.
- The revision register can be read using 1 byte in both, older and
newer platforms.
- However, sending 1 byte on later platform can cause unrecoverable error.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-3-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD EPYC platforms with zen5 and later support APML(SB-RMI)
connection to the BMC over I3C bus for faster data transfer
up to 12.5 Mhz.
I2C and I3C is supported in same file using module_i3c_i2c_driver()
with probe based on dts entry.
AMD APML I3C devices support static address for backward compatibility to I2C.
I3C static address can be used to assign I3C device dynamic address.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New AMD processors support APML connection over I3C.
Move the code, common for both I2C and I3C to new helper
function, "sbrmi_common_probe()"
While at it, renaming the static structure regmap_config "sbrmi_i2c_regmap_config"
to "sbrmi_regmap_config" to avoid confusion.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-1-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the cmm_subsys to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250918140816.335916-3-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the suspend_subsys to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250918140816.335916-2-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The API for apm_get_power_status is "call it if it isn't NULL",
except it's also initialised with a no-op __apm_get_power_status.
This was added alongside apm_get_power_status in 2007.
The apm_get_power_status symbol is used in these files:
arch/arm/mach-pxa/sharpsl_pm.c:extern void (*apm_get_power_status)(struct apm_power_info *);
arch/arm/mach-pxa/sharpsl_pm.c: apm_get_power_status = sharpsl_apm_get_power_status;
arch/sh/boards/mach-hp6xx/hp6xx_apm.c: apm_get_power_status = hp6x0_apm_get_power_status;
drivers/char/apm-emulation.c:void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
drivers/char/apm-emulation.c:EXPORT_SYMBOL(apm_get_power_status);
drivers/char/apm-emulation.c: if (apm_get_power_status)
drivers/char/apm-emulation.c: apm_get_power_status(&info);
drivers/macintosh/apm_emu.c: apm_get_power_status = pmu_apm_get_power_status;
drivers/macintosh/apm_emu.c: if (apm_get_power_status == pmu_apm_get_power_status)
drivers/macintosh/apm_emu.c: apm_get_power_status = NULL;
drivers/power/supply/apm_power.c: apm_get_power_status = apm_battery_apm_get_power_status;
drivers/power/supply/apm_power.c: apm_get_power_status = NULL;
include/linux/apm-emulation.h:extern void (*apm_get_power_status)(struct apm_power_info *);
All of them are compatible with the API (post-remove UAFs notwithstanding)
and don't even read it except to compare with their own values;
on a cursory glance this doesn't seem to have ever not been the case.
Fixes: 7726942fb1 ("[APM] Add shared version of APM emulation")
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://patch.msgid.link/ba3nzxffdpuz2eo5kbpm5iez2rcdves3qpd4kvnmshxwjburwo@tarta.nabijaczleweli.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The modern forms of the LGPL-2.1 tags have already been added as valid
a long time ago, see commit bc12834958 ("LICENSES/LGPL-2.1: Add
LGPL-2.1-or-later as valid identifiers"). However, the information is
still missing in the "Usage-Guide" section, so it can currently be
confusing whether these tags are allowed in new files or not. Thus
add the tags to the usage guide section, too, to make this clear
(similar to what we do in the GPL-2.0 file already).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region().
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Link: https://patch.msgid.link/20251013132833.1783880-1-madhurkumar004@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the ps3_system_bus_type to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Link: https://patch.msgid.link/20250918114840.53581-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the rio_bus_type to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250919073201.751348-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the eisa_bus_type to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250919065327.672924-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the spu_subsys to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250918141633.339803-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because driver core can properly handle constant struct bus_type,
move the sa1111_bus_type to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250918134429.270814-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace kcalloc() followed by copy_from_user() with memdup_array_user()
to improve and simplify comedi_unlocked_ioctl().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20250917131349.117642-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the cdx_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Nipun Gupta <nipun.gupta@amd.com>
Cc: Nikhil Agarwal <nikhil.agarwal@amd.com>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025091439-sustained-acorn-4af4@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the intel_th_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025091412-machine-despair-248e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace min() and manual casting of MAX_BUF_SZ with min_t(size_t,,) in
both adi_read() and adi_write().
This matches the initial buffer size calculation:
ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
and makes the code more consistent. No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250908181354.436680-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>