Disable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake.
Correctly disable all usb phy and enable them only if a device actually
use them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-6-ansuelsmth@gmail.com
Add specific ipq8064 dtsi with smb208 rpm regulators.
Qcom advise to use this configuration but it's not mandatory and OEM
can decide to implement their own regulators.
smb208 regulators are used to scale CPU voltage, L2 cache voltage and
Ubi32 cores.
There regulators are controlled by rpm and to correctly works gsbi4-i2c
require to be NEVER disabled or rpm will reject any regulator change
request.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-4-ansuelsmth@gmail.com
Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4
pins and rgmii2 pins for ipq8064.
Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064
dtsi.
Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to
ipq8064 dtsi.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-2-ansuelsmth@gmail.com
Nexus 5 has a RGB LED connected to the TRILED and hence channels 7, 6 and
5 of the LPG. Add a node describing this.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505164336.13210-1-luca@z3ntu.xyz
FP2 has a RGB LED connected to the TRILED and hence channels 7, 6 and
5 of the LPG. Add a node describing this.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505163029.6541-1-luca@z3ntu.xyz
CONFIG_CC_VERSION_TEXT="x86_64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0"
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
drivers/clk/qcom/gpucc-sm8350.c:111:2: error: initializer element is not constant
gpu_cc_parent,
^~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm8350.c:111:2: note: (near initialization for ‘gpu_cc_parent_data_0[0]’)
drivers/clk/qcom/gpucc-sm8350.c:126:2: error: initializer element is not constant
gpu_cc_parent,
^~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm8350.c:126:2: note: (near initialization for ‘gpu_cc_parent_data_1[0]’)
make[3]: *** [drivers/clk/qcom/gpucc-sm8350.o] Error 1
It seems that nested constant initializer is not supported in GCC 7.4.0. For portability resons, we should fix it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 160758b05a ("clk: qcom: add support for SM8350 GPUCC")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220714121144.71062-1-renzhijie2@huawei.com
Three SoCs did not follow the interrupt order specified by the USB
controller binding.
While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Split out from arm64 patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org
Three SoCs did not follow the interrupt order specified by the USB
controller binding.
While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Omitted sdx65 part from this patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org
Only one of the USB controllers supports SuperSpeed and have an SS PHY
wakeup interrupt.
Reorder the interrupts so that they match the updated binding which
specifically has the optional interrupt last.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-4-johan+linaro@kernel.org
The two single-port SC8280XP USB controllers do not have an hs_phy_irq
interrupt. Instead they have a pwr_event interrupt which is distinct
from the former and not yet supported by the driver.
Fix the USB node interrupt names so that they match the devicetree
binding.
Also fix the pwr_event interrupt of the second controller which should
be 811 as noticed by Andrew Halaney.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-3-johan+linaro@kernel.org
Fix the USB controller clock order and naming so that they match the
devicetree binding.
Note that the driver currently simply enables all clocks in the order
that they are specified in the devicetree. Reordering the clocks as per
the binding means that the only explicit ordering constraint found in
the vendor driver, that cfg_noc should be enabled before the core_clk,
is now honoured.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-2-johan+linaro@kernel.org
In olpc_battery_probe(), we should hold the reference returned by
of_find_compatible_node() and use it to call of_node_put() for
refcount balance.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
It seems to me that ab8500 driver is using dedicated workqueues and
is not calling schedule{,_delayed}_work{,_on}(). Then, there will be
no work to flush using flush_scheduled_work().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some leftover code for external chargers only used with
unreleased ASIC revisions and the header file for the
unsupported PM2301 was left behind in an earlier cleanup,
fix it by deleting the remnants.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
I am maintaining these drivers so add patterns to MAINTAINERS
for them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Convert the Qualcomm Power Supply Hold Reset bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
It seems to be a typo, there is no actual BUG, but it's better to
fix it to avoid any possible BUG after we change the type of
supplied_from.
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=/47A
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs reverts from David Sterba:
"Due to a recent report [1] we need to revert the radix tree to xarray
conversion patches.
There's a problem with sleeping under spinlock, when xa_insert could
allocate memory under pressure. We use GFP_NOFS so this is a real
problem that we unfortunately did not discover during review.
I'm sorry to do such change at rc6 time but the revert is IMO the
safer option, there are patches to use mutex instead of the spin locks
but that would need more testing. The revert branch has been tested on
a few setups, all seem ok.
The conversion to xarray will be revisited in the future"
Link: https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/ [1]
* tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: turn delayed_nodes_tree into an XArray"
Revert "btrfs: turn name_cache radix tree into XArray in send_ctx"
Revert "btrfs: turn fs_info member buffer_radix into XArray"
Revert "btrfs: turn fs_roots_radix in btrfs_fs_info into an XArray"
5.20, second part, please pull the following:
- Rafal spells out what the BCA acronym means
- Florian removes the forced thermal subsystem selection done by
ARCH_BCM_NSP
-----BEGIN PGP SIGNATURE-----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=1QpZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RF8y
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/soc-part2' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-based SoCs Kconfig updates for
5.20, second part, please pull the following:
- Rafal spells out what the BCA acronym means
- Florian removes the forced thermal subsystem selection done by
ARCH_BCM_NSP
* tag 'arm-soc/for-5.20/soc-part2' of https://github.com/Broadcom/stblinux:
ARM: bcmbca: Include full family name in Kconfig
ARM: bcm: NSP: Removed forced thermal selection
Link: https://lore.kernel.org/r/20220715221642.297536-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.20, second part, please pull the following:
- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
we can remove ARCH_BCM4908 and continue to have make oldconfig work.
Finally he spells out what BCA means to make it clearer
-----BEGIN PGP SIGNATURE-----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=fDSG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7JrY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.20, second part, please pull the following:
- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
we can remove ARCH_BCM4908 and continue to have make oldconfig work.
Finally he spells out what BCA means to make it clearer
* tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Include full family name in Kconfig
arm64: make ARCH_BCM4908 select ARCH_BCMBCA
arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000
Link: https://lore.kernel.org/r/20220715221642.297536-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
5.20, second part:
- Rafal defines the binding of BCM4912 based router Asus GT-AX6000
-----BEGIN PGP SIGNATURE-----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=n0Pn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLTFSgACgkQmmx57+YA
GNmcZg/9F0hzQboJ478vJ3AxNYG2L4ciP6u1ZoDMtId9iSNI9LVNu+MAkued0wtN
19hq9f+LHx8LWG4A8CVpo/4UxRFiyLpLxA3wHptON30goz8JAQKqnbnNojwEhgxU
IM+WAW8i56/AEcCKGBPGdO0c8ucROQoD8rJrhYDk5kqE4XEOPZvKF67O7RR8DDCA
1dG6g8NFgjQpbjz0hSog122myCx9L8oazDffSkVmvA9hqNhdlQOEHl7AtM7qqgJj
ufU3ObubYLiin6rSrf7tJdn/ec+f3WbuoPPtVqBw0UuWPwXlruUWpIwflXBeei3I
Evyvc65wgeenWQr/tu7syl2NtfFwlBrpN/HIkWkvj2OnRPZ/n45rTZpwah8kmdgY
DUXe4BVBsUPKu34B2nhbZqnlx2hEZR5CAQG8wsiPySfChT08WGqnluZKsFWB4vI8
SZAmao4jLQ4uIONgM/LbVKvg7NjivigI7YJAK6XhbKuZDOyi1bKKLhUovBnrG8pW
tCuEHjiN0D4HMzyEg7y4EigKQfDOkoWzbI7Iij102+WSJ8fgMFYoLC6sOvg+JNCV
XCX5pw6XZyKaHaepFHB0TvmjB4zakeUuUYxVJ0odBVqQPq2DdnZ4SeJiaTffF44L
2K2gfl+2yoNPEPjTBuzKPNOnLDgua4eI9pipH6pXwMvKTNwAJbo=
=TGWh
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM SoCs Device Tree changes for
5.20, second part:
- Rafal defines the binding of BCM4912 based router Asus GT-AX6000
* tag 'arm-soc/for-5.20/devicetree-part2' of https://github.com/Broadcom/stblinux:
dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912
Link: https://lore.kernel.org/r/20220715221642.297536-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Six small and reasonably obvious fixes, all in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYtK0+yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZMbAP0YIZuC
hyfWgjAUqrvMNEZIJEWGPfGNLWUNAhBEx7PQSQEAlP1m9DrWEonB1hChfsv2KH8O
Bio7YzocUBhtoFDEpzQ=
=CvA4
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small and reasonably obvious fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm80xx: Set stopped phy's linkrate to Disabled
scsi: pm80xx: Fix 'Unknown' max/min linkrate
scsi: ufs: core: Fix missing clk change notification on host reset
scsi: ufs: core: Drop loglevel of WriteBoost message
scsi: megaraid: Clear READ queue map's nr_queues
scsi: target: Fix WRITE_SAME No Data Buffer crash
Here are some small USB driver fixes and new device ids for 5.19-rc7.
They include:
- new usb-serial driver ids
- typec uevent fix
- uvc gadget driver fix
- dwc3 driver fixes
- ehci-fsl driver fix
Note, I had to merge in 5.19-rc6 into this branch in order to do a clean
merge with the usb-serial fixes tree as they were based on that tag of
yours.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYtJYhQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykYUwCeMpLBn1LwLrNwC7eg5s6W+ebkT2IAnAyfC0Ly
ABSdbL39dgnKAUf5wSkf
=Tdsu
-----END PGP SIGNATURE-----
Merge tag 'usb-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc7.
They include:
- new usb-serial driver ids
- typec uevent fix
- uvc gadget driver fix
- dwc3 driver fixes
- ehci-fsl driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: ftdi_sio: add Belimo device ids
drivers/usb/host/ehci-fsl: Fix interrupt setup in host mode.
usb: gadget: uvc: fix changing interface name via configfs
usb: typec: add missing uevent when partner support PD
usb: dwc3-am62: remove unnecesary clk_put()
usb: dwc3: gadget: Fix event pending check
Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- long time bug in pty_write() that has been reported in the
past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYtJZSg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymDUQCfbfzfsMweUSiEjcfENNV4o52o3JgAn3MudgIV
y1gogwEVkYK6q5itgi3W
=ZAlt
-----END PGP SIGNATURE-----
Merge tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- longtime bug in pty_write() that has been reported in the past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
vt: fix memory overlapping when deleting chars in the buffer
serial: mvebu-uart: correctly report configured baudrate value
serial: 8250: Fix PM usage_count for console handover
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
serial: 8250: Fix __stop_tx() & DMA Tx restart races
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
tty: serial: samsung_tty: set dma burst_size to 1
serial: 8250: dw: enable using pdata with ACPI
Rework the IIO test Kconfig to support building KUnit tests as modules.
This lets users execute tests at runtime in addition to the usual
tools/testing/kunit/kunit.py script.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-6-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The KUnit documentation indicates that all KUnit Kconfig entries must
match CONFIG_<name>_KUNIT_TEST: where <name> is the name of the test
suite. Rename the IIO_TEST_FORMAT configuration accordingly.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-4-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Fix building of out-of-tree kernel modules without a pre-built
kernel in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of
zcrypt modules.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYtHZUxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8ENUAP90iq8LRvI+F16ckFOZSr+r38Mh
FL0eJSiX840uBevfugEAwxXB8xR6qvqW2x6+44NzTXk+gosjZkAv0kb+I0zd0Ag=
=XCBM
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix building of out-of-tree kernel modules without a pre-built kernel
in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of zcrypt
modules.
* tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix error handling in __verify_queue_reservations()
s390/nospec: remove unneeded header includes
s390/nospec: build expoline.o for modules_prepare target
Fix recent regression in the cpufreq mediatek driver related
to incorrect handling of regulator_get_optional() return
value (AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----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=jx62
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki
"Fix recent regression in the cpufreq mediatek driver related to
incorrect handling of regulator_get_optional() return value
(AngeloGioacchino Del Regno)"
* tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: Handle sram regulator probe deferral
Fix more fallout from recent changes of the ACPI CPPC handling on AMD
platforms (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=Y0dz
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix more fallout from recent changes of the ACPI CPPC handling on AMD
platforms (Mario Limonciello)"
* tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
Simplify DAC write code by defining base member as u16 __iomem *; DAC
registers are 16-bit so this allows us to index each DAC channel
directly in a loop rather than calculating the offsets by multipling by
2 each time.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/d9dab6696af7eabb2d46f5cbc7871329f499c1c9.1657213745.git.william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----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=vRnn
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Make pr_flush() fast when consoles are suspended.
* tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: do not wait for consoles when suspended
Currently the jitter mechanism will require two timer ticks per
iteration, and it requires N iterations per bit. This N is determined
with a small measurement, and if it's too big, it won't waste time with
jitter entropy because it'd take too long or not have sufficient entropy
anyway.
With the current max N of 32, there are large timeouts on systems with a
small CONFIG_HZ. Rather than set that maximum to 32, instead choose a
factor of CONFIG_HZ. In this case, 1/30 seems to yield sane values for
different configurations of CONFIG_HZ.
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Fixes: 78c768e619 ("random: vary jitter iterations based on cycle counter speed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IIO core correctly will take care of firmware node if it's not set in
the driver. Drop ACPI and OF specifics from the driver and allow IIO
core to handle this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220615114746.2767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It's not correct to use artificial device created by IIO core to
retrieve device properties. Even ->get_default_reg() callback
takes a simple struct device pointer which suggests it wants to
operate on the real device.
Correct this by replacing pointer to IIO device by a real device
pointer in the caller of ->get_default_reg().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220615114746.2767-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To provide a new IIO trigger to the IIO core, usually driver executes the
following pipeline: allocate()/register()/get(). Before, IIO core assigned
trig->owner as a pointer to the module which registered this trigger at
the register() stage. But actually the trigger object is owned by the
module earlier, on the allocate() stage, when trigger object is
successfully allocated for the driver.
This patch moves trig->owner initialization from register()
stage of trigger initialization pipeline to allocate() stage to
eliminate all misunderstandings and time gaps between trigger object
creation and owner acquiring.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20220601174837.20292-1-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the usb_1 SS PHY interrupt, which was mistakingly replaced with one
of the usb_2 PHY interrupts.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715165344.28822-1-johan+linaro@kernel.org
