Add support for Intel Thunder Bay SPI controller, which uses DesignWare
DWC_ssi core and also add common init function for both Keem Bay and
Thunder Bay.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220713042223.1458-5-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to select the controller mode as master mode by setting Bit 31
of CTRLR0 register. This feature is supported for controller versions above
v1.02.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220713042223.1458-4-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation for SPI controller in Intel Thunder Bay SoC.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220713042223.1458-3-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing underscore in IP version macro to avoid compilation issue.
The macro is used for IP version comparison in the current patchset.
Fixes: 2cc8d9227b ("spi: dw: Introduce Synopsys IP-core versions interface")
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220713042223.1458-2-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.
Fixes: 39bfab8844 ("net: ftgmac100: Add support for DT phy-handle property")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima says:
====================
sysctl: Fix data-races around ipv4_net_table (Roun).
This series fixes data-races around the first 13 knobs and
nexthop_compat_mode in ipv4_net_table.
I will post another patch for three early_demux knobs later,
so the next round will start from ip_default_ttl.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading nexthop_compat_mode, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 4f80116d3d ("net: ipv4: add sysctl for nexthop api compatibility mode")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_ecn_fallback, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 492135557d ("tcp: add rfc3168, section 6.1.1.1. fallback")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_ecn, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 6897445fb1 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ratelimit, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_errors_use_inbound_ifaddr, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1c2fb7f93c ("[IPV4]: Sysctl configurable icmp error source address.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ignore_bogus_error_responses, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_ignore_broadcasts, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Fixes: 1fd07f33c3 ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_ignore_all, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_max_tw_buckets, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: cb94441306 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for the
remaining ALSA core API functions.
Link: https://lore.kernel.org/r/20220713104759.4365-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for
memory allocation helpers.
Link: https://lore.kernel.org/r/20220713104759.4365-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
proper format. This patch adds or fixes the missing entries for
control API.
Link: https://lore.kernel.org/r/20220713104759.4365-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value and
the summary for each struct / enum in a proper format. This patch
adds or fixes the missing entries for compress-offload API.
Link: https://lore.kernel.org/r/20220713104759.4365-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for PCM
dmaengine API.
Link: https://lore.kernel.org/r/20220713104759.4365-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for PCM
API.
Link: https://lore.kernel.org/r/20220713104759.4365-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Traditionally swiotlb was not performance critical because it was only
used for slow devices. But in some setups, like TDX/SEV confidential
guests, all IO has to go through swiotlb. Currently swiotlb only has a
single lock. Under high IO load with multiple CPUs this can lead to
significat lock contention on the swiotlb lock.
This patch splits the swiotlb bounce buffer pool into individual areas
which have their own lock. Each CPU tries to allocate in its own area
first. Only if that fails does it search other areas. On freeing the
allocation is freed into the area where the memory was originally
allocated from.
Area number can be set via swiotlb kernel parameter and is default
to be possible cpu number. If possible cpu number is not power of
2, area number will be round up to the next power of 2.
This idea from Andi Kleen patch(https://github.com/intel/tdx/commit/
4529b5784c141782c72ec9bd9a92df2b68cb7d45).
Based-on-idea-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
commit 65c7cdedeb ("genirq: Provide new interfaces for affinity hints")
deprecates irq_set_affinity_hint(). Use the new
irq_set_affinity_and_hint() instead.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If LMH (Limits Management Hardware) is available, when a policy is
disabled by unplugging the last online CPU of policy->cpus, the LMH
irq is left enabled.
When the policy is re-enabled with any of the CPU in policy->cpus
being plugged in, qcom_cpufreq_ready() re-enables the irq. This
triggers the following warning:
[ 379.160106] Unbalanced enable for IRQ 154
[ 379.160120] WARNING: CPU: 7 PID: 48 at kernel/irq/manage.c:774 __enable_irq+0x84/0xc0
Thus disable the irq.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If LMH (Limits Management Hardware) is available, when a policy is
disabled by unplugging the last online CPU of policy->cpus,
qcom_cpufreq_hw_cpu_offline() sets cancel_throttle=true.
cancel_throttle is not reset when the policy is re-enabled with any
of the CPU in policy->cpus being plugged in. So reset it.
This patch also adds an early exit check.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
HZ macros has been centralized in units.h since [1]. Use it to avoid
duplicated definition.
[1] commit e2c77032fc ("units: add the HZ macros")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If regulator_get_voltage() fails, it should return the error code in
mtk_cpu_dvfs_info_init().
Fixes: 0daa47325b ("cpufreq: mediatek: Link CCI device to CPU")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If the regulator_get_optional() call for the SRAM regulator returns
a probe deferral, we must bail out and retry probing later: failing
to do this will produce unstabilities on platforms requiring the
handling for this regulator.
Fixes: ffa7bdf7f3 ("cpufreq: mediatek: Make sram regulator optional")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
So it can be used for port range filter offloading.
Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksandr Mazur says:
====================
net: marvell: prestera: add MDB offloading support
This patch series adds support for the MDB handling for the marvell
Prestera Driver. It's used to propagate IGMP groups registered within
the Kernel to the underlying HW (offload registered groups).
Features:
- define (and implement) main internal MDB-related objects;
- define (and implement) main HW APIs for MDB handling;
- add MDB handling support for both regular ports as well as Bond
interfaces;
- Mirrored behavior of Bridge driver upon multicast router appearance
(all traffic flooded when there's no mcast router; mcast router
receives all mcast traffic, and only group-specific registered mcast
traffic is being received by ports who've explicitly joined any group
when there's a registered mcast router);
- Reworked prestera driver bridge flags (especially multicast)
setting - thus making it possible to react over mcast disabled messages
properly by offloading this state to the underlying HW
(disabling multicast flooding);
Limitations:
- Not full (partial) IGMPv3 support (due to limited switchdev
notification capabilities:
MDB events are being propagated only with a single MAC entry,
while IGMPv3 has Group-Specific requests and responses);
- It's possible that multiple IP groups would receive traffic from
other groups, as MDB events are being propagated with a single MAC
entry, which makes it possible to map a few IPs over same MAC;
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
PATCH V5:
- fix checkpatch errors (4/4).
- remove function forward declarations, and move
function implementations to match the removed
forward declarations (4/4).
- rebased changes on top of latest master.
PATCH V4:
- fix clang warning - var uninitialized when used.
PATCH V3:
- add missing function implementations to 2/4 (HW API implementation),
only definitions were added int V1, V2, and implementation waas missed
by mistake.
Reported-by: kernel test robot <lkp@intel.com>
- fix compiletime warning (unused variable)
PATCH V2:
- include all the patches of patch series (V1's been sent to
closed net-next, also had not all patches included);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define bridge MDB entry (software entry):
- entry that get's created upon receiving MDB management events
(create/delete), that inherently defines a software entry,
which can be enabled (offloaded to the HW) or disabled (removed
from HW).
This separation is done to achieve a better highlevel
management of HW resources - software MDB entry could exist,
while it's not necessarily should be configured on the HW.
For example: by default, the Linux behavior would not replicate
multicast traffic to multicast group members if there's no
active multicast router and thus - no actual multicast traffic
can be received/sent. So, until multicast router appears on the
system no HW configuration should be applied, although SW MDB entries
should be tracked.
Another example would be altering state of 'multicast enabled' on
the bridge: MC_DISABLED should invoke disabling / clearing multicast
groups of specified bridge on the HW, yet upon receiving 'multicast
enabled' event, driver should reconfigure any existing software MDB
groups on the HW.
Keeping track of software MDB entries in such way makes it possible
to properly react on such events.
Define bridge MDB port entry (software entry):
- entry that helps keeping track (on software - driver - level) of which
bridge mebemer interface joined any give MDB group;
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define MDB entry that can be offloaded:
- FDB entry, that defines an multicast group to which traffic can be
replicated to;
Define flood domain:
- Arrangement of ports (list), that have joined multicast group, which
would receive and replicate to multicast traffic of specified group;
Define flood domain port:
- single flood domain list entry, that is associated with any given
bridge port interface (could be LAG interface or physical port-member).
Applicable to both Q and D bridges;
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Separate flags to make it possible to alter them separately;
Move bridge flags setting logic from HW API level to prestera_main
where it belongs;
Move bridge flags parsing (and setting using prestera API) to
prestera_switchdev.c - module responsible for bridge operations
handling;
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cards with 4k native sector size may only be read 4k-aligned,
accommodate for this in the single read recovery and use it.
Fixes: 81196976ed (mmc: block: Add blk-mq support)
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/cf4f316274c5474586d0d99b17db4a4c@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The current code allows to inherit the TTL (hop_limit) from the
payload when skb->protocol is ETH_P_IP or ETH_P_IPV6.
However when the payload is VLAN encapsulated (e.g because the tunnel
is of type GRETAP), then this inheriting does not work, because the
visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD.
Instead of skb->protocol, use skb_protocol().
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the payload is a VLAN encapsulated IPv6/IPv6 frame, we can
skip the 802.1q/802.1ad ethertypes and jump to the actual protocol.
This way we treat IPv4/IPv6 frames as IP instead of as "other".
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code always forces a dscp of 0 for all non-IP frames.
However when setting a specific TOS with the command
ip link add name tep0 type ip6gretap local fdd1:ced0:5d88:3fce::1
remote fdd1:ced0:5d88:3fce::2 tos 0xa0
one would expect all GRE encapsulated frames to have a TOS of 0xA0.
and not only when the payload is IPv4/IPv6.
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code allows to inherit the TOS, TTL, DF from the payload
when skb->protocol is ETH_P_IP or ETH_P_IPV6.
However when the payload is VLAN encapsulated (e.g because the tunnel
is of type GRETAP), then this inheriting does not work, because the
visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD.
Instead of skb->protocol, use skb_protocol().
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the mmc fixes for v5.19rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v5.20.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
