That has been done in BO release notify.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In init/Kconfig, the part dedicated to modules is quite large.
Move it into a dedicated Kconfig in kernel/module/
MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is
only used when MODULES are set, move it in with everything else to
avoid confusion.
MODULE_SIG_FORMAT is left in init/Kconfig because this configuration
item is not used in kernel/modules/ but in kernel/ and can be
selected independently from CONFIG_MODULES. It is for instance
selected from security/integrity/ima/Kconfig.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Windows 10/11 guests with Hyper-V role (WSL2) enabled are observed to
hang upon boot or shortly after when a non-default TSC frequency was
set for L1. The issue is observed on a host where TSC scaling is
supported. The problem appears to be that Windows doesn't use TSC
scaling for its guests, even when the feature is advertised, and KVM
filters SECONDARY_EXEC_TSC_SCALING out when creating L2 controls from
L1's VMCS. This leads to L2 running with the default frequency (matching
host's) while L1 is running with an altered one.
Keep SECONDARY_EXEC_TSC_SCALING in secondary exec controls for L2 when
it was set for L1. TSC_MULTIPLIER is already correctly computed and
written by prepare_vmcs02().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: d041b5ea93 ("KVM: nVMX: Enable nested TSC scaling")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220712135009.952805-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is an unexpected word 'is' in a comments that need to be dropped
file: ./drivers/thermal/intel/x86_pkg_temp_thermal.c
line: 108
* tj-max is is interesting because threshold is set relative to this
changed to:
* tj-max is interesting because threshold is set relative to this
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
We need a way to send extra parameters to DSP firmware. In order to do
this, we introduce ext_data array at the end of ipc_stream_params.
With this new addition we can send compress parameters.
This requires SOF ABI bump.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
By mistake a developer managed to create a 'corrupted' IPC4 firmware image which
loaded fine to the DSP and after boot it sent an IPC reply before we would have
received the FW_READY message.
It turned out that the image was an IPC3 firmware and the IPC reply was the IPC3
FW_READY notification message which got understood as an IPC4 reply message due
to the difference between the two IPC mechanism.
This caused a NULL pointer dereference since the reply memory will be allocated
after the FW_READY message.
To make sure this will not bite again, skip any spurious reply messages before
the FW_READY.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
There is no need to decouple a decoupled stream twice.
Keep the decoupling in hda_link_stream_assign() only as it is going to be
executed in all cases.
Drop the outdated comment from hda_link_dma_hw_params() as well since the code
has changed around it.
pcie_aspm_support_enabled() is used only by the acpi/pci_root.c driver,
which cannot be built as a module, so it does not need to be exported.
Unexport it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the shouty macros here with typechecked helper functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Replace this shouty macro with a real C function that has a more
descriptive name.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We should use of_node_put() for the reference 'node' returned by
of_parse_phandle() which will increase the refcount.
Fixes: fec9b62509 ("of: Add plumbing for restricted DMA pool")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220702014449.263772-1-windhl@126.com
We have sanity checks for byte controls and if any of the fail the locally
allocated scontrol->ipc_control_data is freed up, but not set to NULL.
On a rollback path of the error the higher level code will also try to free
the scontrol->ipc_control_data which will eventually going to lead to
memory corruption as double freeing memory is not a good thing.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712130103.31514-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation of probes only supports IPC3 and should not be
loaded for other IPC implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131022.1124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating a snapshot of the NVM the driver needs to read the entire
contents from the NVM and store it. The NVM reads are protected by a lock
that is shared between the driver and the firmware.
If the driver takes too long to read the entire NVM (which can happen on
some systems) then the firmware could reclaim the lock and cause subsequent
reads from the driver to fail.
We could fix this by increasing the timeout that we pass to the firmware,
but we could end up in the same situation again if the system is slow.
Instead have the driver break the reading of the NVM into blocks that are
small enough that we have confidence that the read will complete within the
timeout time, but large enough not to cause significant AQ overhead.
Fixes: dce730f178 ("ice: add a devlink region for dumping NVM contents")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver currently presumes that the record data in the PLDM header
of the firmware image will match the device ID of the running device.
This is true for E810 devices. It appears that for E822 devices that
this is not guaranteed to be true.
Fix this by adding a check for the generic E822 device.
Fixes: d69ea414c9 ("ice: implement device flash update via devlink")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYs11GgAKCRDh3BK/laaZ
PAD3APsHu08aHid5O/zPnD/90BNqAo3ruvu2WhI5wa8Dacd5SwEAgoSlH2Tx3iy9
4zWK4zZX98qAGyI+ij5aejc0TvONqAE=
=4KjV
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fix from Miklos Szeredi:
"Add a temporary fix for posix acls on idmapped mounts introduced in
this cycle. A proper fix will be added in the next cycle"
* tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: turn off SB_POSIXACL with idmapped layers temporarily
amdgpu:
- Hibernation fix
dma-buf:
- fix use after free of fence
i915:
- Fix a possible refcount leak in DP MST connector (Hangyu)
- Fix on loading guc on ADL-N (Daniele)
- Fix vm use-after-free in vma destruction (Thomas)
bridge:
- fsl-ldb : 3 LVDS modesetting fixes
rockchip:
- iommu domain fix
panfrost:
- fix memory corruption
- error path fix
panel:
- orientation quirk fix for Yoga tablet 2
ssd130x:
- fix pre-charge period setting
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmLMyzgACgkQDHTzWXnE
hr5IGg//Xz0/RLMQuS3y09gD4omaXmy30+4+C9lZ3SYVopvWKO3MLoxwaUuVsqZy
ZqMgn6q7jc7SNIpbPAbUucEw+t/eu5pq+UsmDN8MMy5p1ffWk1PzxMrpMiXsW23z
IosA4BYcfkfnURdmTlpo0fJzKmfHo7LKgstJ2igZA0isSyb4cVCVyNDmM3E+/4oF
IsYNzMcIUg82cCYFvw4xZNcZcOvHtyKHOFblFjdLCaACC06+B1upGPpovOxYBweL
aK+Azq+s2K+Tcuck3DpRA5mq27DgDxlczVRjSoGZW8369IKX2lXFXaZVuvEFjekv
5FlrEK4lAWlEHebXF1HTMBOAU2gG8a7M/v6LCiDYCtSeiUBFm+lFG96O16ra0Gac
Vf3HbFCuo1WBGtvIVdDQrRbRQfsp+8OnaaHsNP1HU7VWiAu22/SvSd/ZTktJZTZV
CI+0j9bBw9uHoxXBaq6p7Z06kewgkETL7ygWkAZB03fcS8/TUnVr63Ot8tC2hURp
6u94p5TYwSH3TgXhSEuoaNdp2V7HX+OAXy51X+KzFv8xOXK5kK+E0H4EgmgT03G+
zk0LN1bpAa3NXas5hJyPgbpWHp2+q1VIJw4HjSawYLpFEGzzNSipcUBwbDgr6pS6
amn4N8lisvSV8T/Ibc3pZiXf0hk6xU7yVz+derpiO7gF+wP1Cc4=
=1Vpt
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-07-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"I see you picked up one of the fbdev fixes, this is the other stuff
that was queued up last week.
A bit of a scattering of fixes, three for i915, one amdgpu, and a
couple of panfrost, rockchip, panel and bridge ones.
amdgpu:
- Hibernation fix
dma-buf:
- fix use after free of fence
i915:
- Fix a possible refcount leak in DP MST connector (Hangyu)
- Fix on loading guc on ADL-N (Daniele)
- Fix vm use-after-free in vma destruction (Thomas)
bridge:
- fsl-ldb : 3 LVDS modesetting fixes
rockchip:
- iommu domain fix
panfrost:
- fix memory corruption
- error path fix
panel:
- orientation quirk fix for Yoga tablet 2
ssd130x:
- fix pre-charge period setting"
* tag 'drm-fixes-2022-07-12' of git://anongit.freedesktop.org/drm/drm:
drm/ssd130x: Fix pre-charge period setting
dma-buf: Fix one use-after-free of fence
drm/i915: Fix vm use-after-free in vma destruction
drm/i915/guc: ADL-N should use the same GuC FW as ADL-S
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
drm/amdgpu/display: disable prefer_shadow for generic fb helpers
drm/amdgpu: keep fbdev buffers pinned during suspend
drm/panfrost: Fix shrinker list corruption by madvise IOCTL
drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error
drm/rockchip: Detach from ARM DMA domain in attach_device
drm/bridge: fsl-ldb: Drop DE signal polarity inversion
drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
drm/bridge: fsl-ldb: Fix mode clock rate validation
drm/aperture: Run fbdev removal before internal helpers
drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Tablet 2 830
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the now
pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide.
-----BEGIN PGP SIGNATURE-----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=0Ca0
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull lockdep fix for x86 retbleed from Borislav Petkov:
- Fix lockdep complaint for __static_call_fixup()
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/static_call: Serialize __static_call_fixup() properly
In cifs_put_smb_ses, when we're freeing the last ref count to
the session, we need to free up each channel. At this point,
it is unnecessary to take chan_lock, since we have the last
reference to the ses.
Picking up this lock also introduced a deadlock because it calls
cifs_put_tcp_ses, which locks cifs_tcp_ses_lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
On failure to create a new channel, first cancel the
delayed threads, which could try to search for this
channel, and not find it.
The other option was to put the tcp session for the
channel first, before decrementing chan_count. But
that would leave a reference to the tcp session, when
it has been freed already.
So going with the former option and cancelling the
delayed works first, before rolling back the channel.
Fixes: aa45dadd34 ("cifs: change iface_list from array to sorted linked list")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some PCI Endpoint controllers integrate an eDMA (embedded DMA). eDMA can
bypass the outbound memory address translation unit to access all RC memory
space.
Add eDMA support for pci-epf-test.
Depending on HW availability, the EPF test can use either eDMA or general
system DMA controllers to perform DMA. The test tries to use eDMA first and
falls back to general system DMA controllers if there's no eDMA
Separate dma_chan to dma_chan_tx and dma_chan_rx. Search for an eDMA
channel first, then search for a memory-to-memory DMA channel. If general
memory to memory channels are used, dma_chan_rx = dma_chan_tx.
Add dma_addr_t dma_remote in pci_epf_test_data_transfer() because eDMA uses
remote RC physical address directly.
Add enum dma_transfer_direction dir in pci_epf_test_data_transfer() because
eDMA chooses the correct RX/TX channel by dir.
The overall steps are:
1. Execute dma_request_channel() and filter function to find correct eDMA
RX and TX Channel. If a channel does not exist, fallback to try to
allocate general memory to memory DMA channel.
2. Execute dmaengine_slave_config() to configure remote side physical
address.
3. Execute dmaengine_prep_slave_single() to create transfer descriptor.
4. Execute tx_submit().
5. Execute dma_async_issue_pending()
[bhelgaas: squash in fix from Dan Carpenter <dan.carpenter@oracle.com>:
https://lore.kernel.org/r/Ys2GSTnZhuLzzQG5@kili, also previously posted by
Peng Wu <wupeng58@huawei.com>:
https://lore.kernel.org/all/CANXvt5rK98-cEMgpzopY9POOK8a5=VDib8uKPLgJakOG=hRfwQ@mail.gmail.com/]
Link: https://lore.kernel.org/r/20220524152159.2370739-9-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
This reverts commit 8f61973718.
It turned out that this is not correct. Especially the sync_file info
IOCTL needs to see even signaled fences to correctly report back their
status to userspace.
Instead add the filter in the merge function again where it makes sense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712102849.1562-1-christian.koenig@amd.com
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In case of a firmware crash we force the DSP to be powered down and rebooted.
To make sure that the next boot is going to be clean, force the boot process to
skip the IMR booting and re-download the firmware.
pcie_aspm_pm_state_change() was introduced at the inception of PCIe ASPM
code, but it can cause some issues. For instance, when ASPM config is
changed via sysfs, those changes won't persist across power state change
because pcie_aspm_pm_state_change() overwrites them.
Also, if the driver restores L1SS [1] after system resume, the restored
state will also be overwritten by pcie_aspm_pm_state_change().
Remove pcie_aspm_pm_state_change(). If there's any hardware that really
needs it to function, a quirk can be used instead.
[1] https://lore.kernel.org/linux-pci/20220201123536.12962-1-vidyas@nvidia.com/
Link: https://lore.kernel.org/r/20220509073639.2048236-1-kai.heng.feng@canonical.com
[bhelgaas: remove additional pcie_aspm_pm_state_change() call in
pci_set_low_power_state(), added by
10aa5377fc ("PCI/PM: Split pci_raw_set_power_state()") and moved by
7957d20145 ("PCI/PM: Relocate pci_set_low_power_state()")]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.
The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is a corner case with Tegra30, where we want to skip clk
configuration via dev_pm_opp_set_opp(), but still want the OPP core to
read the "opp-hz" property so we can find the right OPP via freq finding
helpers.
This is the easiest of the ways to make it work, without any special
hacks in the OPP core. Allow config_clks to be passed for single clk
case.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This provides a simple implementation to configure multiple clocks for a
device.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Many helpers can be safely called only for devices that have a single
clk associated with them. Assert the same for those routines.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The helpers for the clock key, at least, would need to assert that the
helpers are called only for single clock case. Prepare for that by
adding an argument to the key finding helpers.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Replicate the same behavior as "rates" here and compare all values
instead of relying on the first entry alone.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds support to allow multiple clocks for a device.
The design is pretty much similar to how this is done for regulators,
and platforms can supply their own version of the config_clks() callback
if they have multiple clocks for their device. The core manages the
calls via opp_table->config_clks() eventually.
We have kept both "clk" and "clks" fields in the OPP table structure and
the reason is provided as a comment in _opp_set_clknames(). The same
isn't done for "rates" though and we use rates[0] at most of the places
now.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, test_bitmap_arr64() only tests bitmap_to_arr64()'s sanity
by comparing the result of double-conversion (bm -> arr64 -> bm2)
with the input bitmap. However, this may be not enough when one side
hides bugs of the second one (e.g. tail clearing, which is being
performed by both).
Expand the tests and check the tail of the actual arr64 used as
a temporary buffer for double-converting.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
GENMASK*() family takes the first and the last bits of the mask
*including* them. So, with the current code bitmap_to_arr64()
doesn't clear the tail properly:
nbits % exp mask must be
1 GENMASK(1, 0) 0x3 0x1
...
63 GENMASK(63, 0) 0xffffffffffffffff 0x7fffffffffffffff
This was found by making the function always available instead of
32-bit BE systems only (for reusing in some new functionality).
Turn the number of bits into the last bit set by subtracting 1.
@nbits is already checked to be positive beforehand.
Fixes: 0a97953fd2 ("lib: add bitmap_{from,to}_arr64")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Previously, we required this to value to be a power of 2 for UDP related
reasons. This patch keeps the power of 2 rule for UDP but allows more
flexibility for TCP and RDMA.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Before this commit, with a large enough LRU of expired items (100), the
loop skipped all the expired items and was entirely ineffectual in
trimming the LRU list.
Fixes: 95cd623250 ('SUNRPC: Clean up the AUTH cache code')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The valid values of nfs options port and mountport are 0 to USHRT_MAX.
The fs parser will return a fail for port values that are negative
and the sloppy option handling then returns success.
But the sloppy option handling is meant to return success for invalid
options not valid options with invalid values.
Restricting the sloppy option override to handle failure returns for
invalid options only is sufficient to resolve this problem.
Changes:
v2: utilize the return value from fs_parse() to resolve this problem
instead of changing the parameter definitions.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add new field to sof_ipc_stream_params in order to extend
stream params struct with extended data to store compress parameters.
Older kernel will still work this as they ext_data_length will always be
zero.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After introducing extended parameters we need to forbid older firmware
versions to run with the current and future kernel versions.
Although in theory the communication protocol will still work the
semantics at application level are undefined. So, prevent this by
disallowing older firmwares to run with newer kernels.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate memory at the end of sof_ipc_stream_params to store
snd_compr_params in order to be sent them to SOF firmware.
This will help firmware correctly configure codecs parameters.
Notice, that we use 2 bytes from the reserved pool in order to store
the extended data length. This is compatible with older FWs where
there was no extended data.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to extend sof_ipc_pcm_parmas with additional data in order
to send compress_params to SOF FW.
The extensions will be done at runtime so we need to dynamically
allocate pcm object of type struct sof_ipc_pcm_params.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of kmap() is being deprecated in favor of kmap_local_page().
With kmap_local_page(), the mapping is per thread, CPU local and not
globally visible. Furthermore, the mapping can be acquired from any context
(including interrupts).
Therefore, use kmap_local_page() in nfs_do_filldir() because this mapping
is per thread, CPU local, and not globally visible.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
filemap_fdatawait_range() will always return 0, after patch 6c984083ec
("NFS: Use of mapping_set_error() results in spurious errors"), it will not
save the wb err in struct address_space->flags:
result = filemap_fdatawait_range(file->f_mapping, ...) = 0
filemap_check_errors(mapping) = 0
test_bit(..., &mapping->flags) // flags is 0
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Deduplicate the helpers to open a device node by passing a name
prefix argument and using the same helper for both kinds of paths.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For GMC 10 parts which support scatter/gather display (display
from system memory), we should allocate a larger gart size
to better handler larger displays. This mirrors what we already
do for GMC 9 parts.
v2: fix typo (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need reserve buffers before unmap mes ctx bo va.
v2: fix removal of dma_resv_excl_fence() (Alex)
v3: fix dma_resv_usage (Alex)
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't assume that the NFS4ERR_DELAY means that the server is processing
this slot id.
Fixes: 3453d5708b ("NFSv4.1: Avoid false retries when RPC calls are interrupted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
