This commit introduces the /sys/kernel/debug/shrinker debugfs interface
which provides an ability to observe the state of individual kernel memory
shrinkers.
Because the feature adds some memory overhead (which shouldn't be large
unless there is a huge amount of registered shrinkers), it's guarded by a
config option (enabled by default).
This commit introduces the "count" interface for each shrinker registered
in the system.
The output is in the following format:
<cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>...
<cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>...
...
To reduce the size of output on machines with many thousands cgroups, if
the total number of objects on all nodes is 0, the line is omitted.
If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as
cgroup inode id. If the shrinker is not numa-aware, 0's are printed for
all nodes except the first one.
This commit gives debugfs entries simple numeric names, which are not very
convenient. The following commit in the series will provide shrinkers
with more meaningful names.
[akpm@linux-foundation.org: remove WARN_ON_ONCE(), per Roman]
Reported-by: syzbot+300d27c79fe6d4cbcc39@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20220601032227.4076670-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: introduce shrinker debugfs interface", v5.
The only existing debugging mechanism is a couple of tracepoints in
do_shrink_slab(): mm_shrink_slab_start and mm_shrink_slab_end. They
aren't covering everything though: shrinkers which report 0 objects will
never show up, there is no support for memcg-aware shrinkers. Shrinkers
are identified by their scan function, which is not always enough (e.g.
hard to guess which super block's shrinker it is having only
"super_cache_scan").
To provide a better visibility and debug options for memory shrinkers this
patchset introduces a /sys/kernel/debug/shrinker interface, to some extent
similar to /sys/kernel/slab.
For each shrinker registered in the system a directory is created. As
now, the directory will contain only a "scan" file, which allows to get
the number of managed objects for each memory cgroup (for memcg-aware
shrinkers) and each numa node (for numa-aware shrinkers on a numa
machine). Other interfaces might be added in the future.
To make debugging more pleasant, the patchset also names all shrinkers, so
that debugfs entries can have meaningful names.
This patch (of 5):
Shrinker debugfs requires a way to represent memory cgroups without using
full paths, both for displaying information and getting input from a user.
Cgroup inode number is a perfect way, already used by bpf.
This commit adds a couple of helper functions which will be used to handle
memcg-aware shrinkers.
Link: https://lkml.kernel.org/r/20220601032227.4076670-1-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20220601032227.4076670-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When user specified more nodes than supported, get_nodes will access nmask
array out of bounds.
Link: https://lkml.kernel.org/r/20220601093211.2970565-1-tianyu.li@arm.com
Fixes: e130242dc3 ("mm: simplify compat numa syscalls")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is no need to update the hugetlb access flags after just setting the
hugetlb page table entry by set_huge_pte_at(), since the page table entry
value has no changes.
Thus remove the unnecessary huge_ptep_set_access_flags() in
hugetlb_mcopy_atomic_pte().
Link: https://lkml.kernel.org/r/f3e28b897b53a69967a8b98a6fdcda3be80c9229.1653616175.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HW_TAGS KASAN skips zeroing page_alloc allocations backing vmalloc
mappings via __GFP_SKIP_ZERO. Instead, these pages are zeroed via
kasan_unpoison_vmalloc() by passing the KASAN_VMALLOC_INIT flag.
The problem is that __kasan_unpoison_vmalloc() does not zero pages when
either kasan_vmalloc_enabled() or is_vmalloc_or_module_addr() fail.
Thus:
1. Change __vmalloc_node_range() to only set KASAN_VMALLOC_INIT when
__GFP_SKIP_ZERO is set.
2. Change __kasan_unpoison_vmalloc() to always zero pages when the
KASAN_VMALLOC_INIT flag is set.
3. Add WARN_ON() asserts to check that KASAN_VMALLOC_INIT cannot be set
in other early return paths of __kasan_unpoison_vmalloc().
Also clean up the comment in __kasan_unpoison_vmalloc.
Link: https://lkml.kernel.org/r/4bc503537efdc539ffc3f461c1b70162eea31cf6.1654798516.git.andreyknvl@google.com
Fixes: 23689e91fb ("kasan, vmalloc: add vmalloc tagging for HW_TAGS")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a clear_highpage_kasan_tagged() helper that does clear_highpage() on a
page potentially tagged by KASAN.
This helper is used by the following patch.
Link: https://lkml.kernel.org/r/4471979b46b2c487787ddcd08b9dc5fedd1b6ffd.1654798516.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename kernel_init_free_pages() to kernel_init_pages(). This function is
not only used for free pages but also for pages that were just allocated.
Link: https://lkml.kernel.org/r/1ecaffc0a9c1404d4d7cf52efe0b2dc8a0c681d8.1654798516.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit adds 'damon_reclaim_' prefix to 'enabled_store()', so that we
can distinguish it easily from the stack trace using 'faddr2line.sh' like
tools.
Link: https://lkml.kernel.org/r/20220606182310.48781-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM's 'enabled' parameter store callback ('enabled_store()')
schedules the parameter check timer ('damon_reclaim_timer') if the
parameter is set as 'Y'. Then, the timer schedules itself to check if
user has set the parameter as 'N'. It's unnecessarily complex.
This commit makes it simpler by making the parameter store callback to
schedule the timer regardless of the parameter value and disabling the
timer's self scheduling.
Link: https://lkml.kernel.org/r/20220606182310.48781-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface's DAMON context building and its online parameter
update have duplicated code. This commit removes the duplicate.
Link: https://lkml.kernel.org/r/20220606182310.48781-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM's handling of 'commit_inputs' parameter is duplicated in
'after_aggregation()' and 'after_wmarks_check()' callbacks. This commit
deduplicates the code for better maintenance.
Link: https://lkml.kernel.org/r/20220606182310.48781-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function for knowing if given monitoring context's targets will have
pid or not is defined and used in dbgfs only. However, the logic is also
needed for sysfs. This commit moves the code to damon.h and makes both
dbgfs and sysfs to use it.
Link: https://lkml.kernel.org/r/20220606182310.48781-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: trivial cleanups".
This patchset contains trivial cleansups for DAMON code.
This patch (of 6):
Commit 81a84182c3 ("Docs/admin-guide/mm/damon/reclaim: document
'commit_inputs' parameter") has documented the 'commit_inputs' parameter
which allows online parameter update, but it didn't remove a paragraph
saying the online parameter update is impossible. This commit removes the
obsolete paragraph.
Link: https://lkml.kernel.org/r/20220606182310.48781-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220606182310.48781-2-sj@kernel.org
Fixes: 81a84182c3 ("Docs/admin-guide/mm/damon/reclaim: document 'commit_inputs' parameter")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__migration_entry_wait and migration_entry_wait_on_locked assume pte is
always mapped from caller. But this is not the case when it's called from
migration_entry_wait_huge and follow_huge_pmd. Add a hugetlbfs variant
that calls hugetlb_migration_entry_wait(ptep == NULL) to fix this issue.
Link: https://lkml.kernel.org/r/20220530113016.16663-5-linmiaohe@huawei.com
Fixes: 30dad30922 ("mm: migration: add migrate_entry_wait_huge()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We might fail to isolate huge page due to e.g. the page is under
migration which cleared HPageMigratable. We should return errno in this
case rather than always return 1 which could confuse the user, i.e. the
caller might think all of the memory is migrated while the hugetlb page is
left behind. We make the prototype of isolate_huge_page consistent with
isolate_lru_page as suggested by Huang Ying and rename isolate_huge_page
to isolate_hugetlb as suggested by Muchun to improve the readability.
Link: https://lkml.kernel.org/r/20220530113016.16663-4-linmiaohe@huawei.com
Fixes: e8db67eb0d ("mm: migrate: move_pages() supports thp migration")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Huang Ying <ying.huang@intel.com>
Reported-by: kernel test robot <lkp@intel.com> (build error)
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When non-lru movable page was freed from under us, __ClearPageMovable must
have been done. So we can remove unneeded lock page and PageMovable check
here. Also free_pages_prepare() will clear PG_isolated for us, so we can
further remove ClearPageIsolated as suggested by David.
Link: https://lkml.kernel.org/r/20220530113016.16663-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
IIUC page_vma_mapped_walk() checks if the vma is possibly huge PMD mapped
with transparent_hugepage_active() and "pvmw->nr_pages >= HPAGE_PMD_NR".
Actually pvmw->nr_pages is returned by compound_nr() or folio_nr_pages(),
so the page should be THP as long as "pvmw->nr_pages >= HPAGE_PMD_NR".
And it is guaranteed THP is allocated for valid VMA in the first place.
But it may be not PMD mapped if the VMA is file VMA and it is not properly
aligned. The transhuge_vma_suitable() is used to do such check, so
replace transparent_hugepage_active() to it, which is too heavy and
overkilling.
Link: https://lkml.kernel.org/r/20220513191705.457775-1-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The parameter used by DEFINE_PAGE_VMA_WALK is _page not page, fix the
parameter name. It didn't cause any build error, it is probably because
the only caller is write_protect_page() from ksm.c, which pass in page.
Link: https://lkml.kernel.org/r/20220512174551.81279-1-shy828301@gmail.com
Fixes: 2aff7a4755 ("mm: Convert page_vma_mapped_walk to work on PFNs")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently the implementation will split the PUD when a fallback is taken
inside the create_huge_pud function. This isn't where it should be done:
the splitting should be done in wp_huge_pud, just like it's done for PMDs.
Reason being that if a callback is taken during create, there is no PUD
yet so nothing to split, whereas if a fallback is taken when encountering
a write protection fault there is something to split.
It looks like this was the original intention with the commit where the
splitting was introduced, but somehow it got moved to the wrong place
between v1 and v2 of the patch series. Rebase mistake perhaps.
Link: https://lkml.kernel.org/r/6f48d622eb8bce1ae5dd75327b0b73894a2ec407.camel@amazon.com
Fixes: 327e9fd489 ("mm: Split huge pages on write-notify or COW")
Signed-off-by: James Gowans <jgowans@amazon.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:
$ umask
0022
$ touch file && ln -s file symlink; ls -l file symlink
-rw-r--r--. 1 root root 0 Jun 23 16:29 file
lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file
This fixes the bug by inserting a missing check that excludes
symlinks.
Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/page_table_check.c: In function `__page_table_check_pte_clear':
mm/page_table_check.c:148:6: error: implicit declaration of function `pte_user_accessible_page'; did you mean `user_access_save'? [-Werror=implicit-function-declaration]
if (pte_user_accessible_page(pte)) {
^~~~~~~~~~~~~~~~~~~~~~~~
user_access_save
ARCH_SUPPORTS_PAGE_TABLE_CHECK should only enabled with MMU.
Link: https://lkml.kernel.org/r/20220624085236.18544-1-yuehaibing@huawei.com
Fixes: 3fee229a8e ("riscv/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When building htmldocs on Linus's tree, there are inline emphasis warnings
on include/linux/highmem.h:
Documentation/vm/highmem:166: ./include/linux/highmem.h:154: WARNING: Inline emphasis start-string without end-string.
Documentation/vm/highmem:166: ./include/linux/highmem.h:157: WARNING: Inline emphasis start-string without end-string.
These warnings above are due to comments in code example at the mentioned
lines above are enclosed by double dash (--), which confuses Sphinx as
inline markup delimiters instead.
Fix these warnings by indenting the code example with literal block
indentation and making the comments C comments.
Link: https://lkml.kernel.org/r/20220622084546.17745-1-bagasdotme@gmail.com
Fixes: 85a85e7601 ("Documentation/vm: move "Using kmap-atomic" to highmem.h")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Higher order allocations for vmemmap pages from buddy allocator must be
able to be treated as indepdenent small pages as they can be freed
individually by the caller. There is no problem for higher order vmemmap
pages allocated at boot time since each individual small page will be
initialized at boot time. However, it will be an issue for memory hotplug
case since those higher order vmemmap pages are allocated from buddy
allocator without initializing each individual small page's refcount. The
system will panic in put_page_testzero() when CONFIG_DEBUG_VM is enabled
if the vmemmap page is freed.
Link: https://lkml.kernel.org/r/20220620023019.94257-1-songmuchun@bytedance.com
Fixes: d8d55f5616 ("mm: sparsemem: use page table lock to protect kernel pmd operations")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The huge_ptep_set_access_flags() can not make the huge pte old according
to the discussion [1], that means we will always mornitor the young state
of the hugetlb though we stopped accessing the hugetlb, as a result DAMON
will get inaccurate accessing statistics.
So changing to use set_huge_pte_at() to make the huge pte old to fix this
issue.
[1] https://lore.kernel.org/all/Yqy97gXI4Nqb7dYo@arm.com/
Link: https://lkml.kernel.org/r/1655692482-28797-1-git-send-email-baolin.wang@linux.alibaba.com
Fixes: 49f4203aae ("mm/damon: add access checking for hugetlb pages")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recently, nommu iounmap() was converted from a static inline function to a
macro again, basically reverting commit 4580ba4ad2 ("sh: Convert
iounmap() macros to inline functions"). With -Werror, this leads to build
failures like:
drivers/iio/adc/xilinx-ams.c: In function `ams_iounmap_ps':
drivers/iio/adc/xilinx-ams.c:1195:14: error: unused variable `ams' [-Werror=unused-variable]
1195 | struct ams *ams = data;
| ^~~
Fix this by replacing the macros for ioremap() and iounmap() by static
inline functions, based on <asm-generic/io.h>.
Link: https://lkml.kernel.org/r/8d1b1766260961799b04035e7bc39a7f59729f72.1655708312.git.geert+renesas@glider.be
Fixes: 13f1fc870d ("sh: move the ioremap implementation out of line")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When fallocate() is used on a shmem file, the pages we allocate can end up
with !PageUptodate.
Since UFFDIO_CONTINUE tries to find the existing page the user wants to
map with SGP_READ, we would fail to find such a page, since
shmem_getpage_gfp returns with a "NULL" pagep for SGP_READ if it discovers
!PageUptodate. As a result, UFFDIO_CONTINUE returns -EFAULT, as it would
do if the page wasn't found in the page cache at all.
This isn't the intended behavior. UFFDIO_CONTINUE is just trying to find
if a page exists, and doesn't care whether it still needs to be cleared or
not. So, instead of SGP_READ, pass in SGP_NOALLOC. This is the same,
except for one critical difference: in the !PageUptodate case, SGP_NOALLOC
will clear the page and then return it. With this change, UFFDIO_CONTINUE
works properly (succeeds) on a shmem file which has been fallocated, but
otherwise not modified.
Link: https://lkml.kernel.org/r/20220610173812.1768919-1-axelrasmussen@google.com
Fixes: 153132571f ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem")
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test of an expression's address does not necessarily represent the
whole condition, it may only be a part of it. Also, an expression's
address is likely to be non-zero in every test expression, not only in
if statements.
This change aims at detecting an address test in more complex conditions
and not only in if statements.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@netatmo.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Looking at the conditional lock acquire functions in the kernel due to
the new sparse support (see commit 4a557a5d1a "sparse: introduce
conditional lock acquire function attribute"), it became obvious that
the lockref code has a couple of them, but they don't match the usual
naming convention for the other ones, and their return value logic is
also reversed.
In the other very similar places, the naming pattern is '*_and_lock()'
(eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the
function returns true when the lock is taken.
The lockref code is superficially very similar to the refcount code,
only with the special "atomic wrt the embedded lock" semantics. But
instead of the '*_and_lock()' naming it uses '*_or_lock()'.
And instead of returning true in case it took the lock, it returns true
if it *didn't* take the lock.
Now, arguably the reflock code is quite logical: it really is a "either
decrement _or_ lock" kind of situation - and the return value is about
whether the operation succeeded without any special care needed.
So despite the similarities, the differences do make some sense, and
maybe it's not worth trying to unify the different conditional locking
primitives in this area.
But while looking at this all, it did become obvious that the
'lockref_get_or_lock()' function hasn't actually had any users for
almost a decade.
The only user it ever had was the shortlived 'd_rcu_to_refcount()'
function, and it got removed and replaced with 'lockref_get_not_dead()'
back in 2013 in commits 0d98439ea3 ("vfs: use lockred 'dead' flag to
mark unrecoverably dead dentries") and e5c832d555 ("vfs: fix dentry
RCU to refcounting possibly sleeping dput()")
In fact, that single use was removed less than a week after the whole
function was introduced in commit b3abd80250 ("lockref: add
'lockref_get_or_lock() helper") so this function has been around for a
decade, but only had a user for six days.
Let's just put this mis-designed and unused function out of its misery.
We can think about the naming and semantic oddities of the remaining
'lockref_put_or_lock()' later, but at least that function has users.
And while the naming is different and the return value doesn't match,
that function matches the whole '{atomic,refcount}_dec_and_test()'
pattern much better (ie the magic happens when the count goes down to
zero, not when it is incremented from zero).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
-----BEGIN PGP SIGNATURE-----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=sObb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+pwl
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DT fixes for v5.19
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
arm64: dts: qcom: sm8450 add ITS device tree node
arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
arm64: dts: qcom: sm8450: fix interconnects property of UFS node
arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar
Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Global variables do not need to be initialized to 0 and checkpatch
flags this error in tools/testing/selftests/timers/alarmtimer-suspend.c:
ERROR: do not initialise globals to 0
+int final_ret = 0;
Fix this checkpatch error.
Signed-off-by: Zan Aziz <zanaziz313@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add binding for the Emerging Display Technology ETML0700Y5DHA panel.
It is a 7" WSVGA (1024x600) TFT LCD panel with:
- LVDS data interface,
- backlight and
- capacitive touch.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220530122407.918874-1-m.felsch@pengutronix.de
LQ101R1SX03 is compatible with LQ101R1SX01 from software perspective,
document it. The LQ101R1SX03 is a newer revision of LQ101R1SX01, it has
minor differences in hardware pins in comparison to the older version.
The newer version of the panel can be found on Android tablets, like
ASUS TF701T.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220529180548.9942-2-clamor95@gmail.com
The kernel tends to try to avoid conditional locking semantics because
it makes it harder to think about and statically check locking rules,
but we do have a few fundamental locking primitives that take locks
conditionally - most obviously the 'trylock' functions.
That has always been a problem for 'sparse' checking for locking
imbalance, and we've had a special '__cond_lock()' macro that we've used
to let sparse know how the locking works:
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
so that you can then use this to tell sparse that (for example) the
spinlock trylock macro ends up acquiring the lock when it succeeds, but
not when it fails:
#define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock))
and then sparse can follow along the locking rules when you have code like
if (!spin_trylock(&dentry->d_lock))
return LRU_SKIP;
.. sparse sees that the lock is held here..
spin_unlock(&dentry->d_lock);
and sparse ends up happy about the lock contexts.
However, this '__cond_lock()' use does result in very ugly header files,
and requires you to basically wrap the real function with that macro
that uses '__cond_lock'. Which has made PeterZ NAK things that try to
fix sparse warnings over the years [1].
To solve this, there is now a very experimental patch to sparse that
basically does the exact same thing as '__cond_lock()' did, but using a
function attribute instead. That seems to make PeterZ happy [2].
Note that this does not replace existing use of '__cond_lock()', but
only exposes the new proposed attribute and uses it for the previously
unannotated 'refcount_dec_and_lock()' family of functions.
For existing sparse installations, this will make no difference (a
negative output context was ignored), but if you have the experimental
sparse patch it will make sparse now understand code that uses those
functions, the same way '__cond_lock()' makes sparse understand the very
similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()'
annotations.
Note that in some cases this will silence existing context imbalance
warnings. But in other cases it may end up exposing new sparse warnings
for code that sparse just didn't see the locking for at all before.
This is a trial, in other words. I'd expect that if it ends up being
successful, and new sparse releases end up having this new attribute,
we'll migrate the old-style '__cond_lock()' users to use the new-style
'__cond_acquires' function attribute.
The actual experimental sparse patch was posted in [3].
Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2]
Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3]
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix statfs blocking on background inode gc workers
- Fix some broken inode lock assertion code
- Fix xattr leaf buffer leaks when cancelling a deferred xattr update
operation
- Clean up xattr recovery to make it easier to understand.
- Fix xattr leaf block verifiers tripping over empty blocks.
- Remove complicated and error prone xattr leaf block bholding mess.
- Fix a bug where an rt extent crossing EOF was treated as "posteof"
blocks and cleaned unnecessarily.
- Fix a UAF when log shutdown races with unmount.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmK/kVMACgkQ+H93GTRK
tOs0tQ/+PYRhEDKrgocxZGJFNvnxqPRdEDu9k5XCnO2Y/DZRAF52F0JZaPtuiFH4
12e9vzYYRNrE9KifzPWo4j2L067kFszt4XcAjytJuf5f6k/duX7XbsdMb17Qxd28
mZDtBBSQCc9fcQo21u5SdZlPaD1SC1843jB4Oe7Sbo3AFvVAMwuBUgnp2TSDA8V0
0q25PUD0ZvWP3UTQS4M4fW4WhFa5wF+GnLR1DZjryFIzuUp9JwdCQZHIFnp6cHq9
TZMDJ4WhD9igMSzicRfgPoC8z/D3Mm0cFmRoURbG3GLzAeJ+e7PJ43rvlwq6Ajcv
v5DhyQvFkiVjKLsrtJyvvUGSpkLL/touNG8MUE9I0heiiwb0QbP108aHWU8AS1Dr
q7XHIxPaOhvlzVZN1uTuZE4N51/0NWITGKBwF0XU1b5D3wLyvOY6fbI7KLfkX2Sa
4zHKn4QpHUIE9fs5Na3H6L+ndlJclo2DJA6lF26pLgmrT7NLmJG+r97XagBsp/pr
X8qOvVMg1XJA37Vy1bTN5cfEYzTTksJk/fQ3AvSKHDCeP5u87kiZ6hqNnW6dD0YF
D8VTX29rVQr5HavbcGCmAyBZpk4CfclCsWCQrZu9MCnQSW37HnObXPJkIWvzt8Mn
j6emhPcYHy5TwSChxdpzl733ZX0KdkdOAgkWgqtod2E/7fe+g7Q=
=8QeL
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This fixes some stalling problems and corrects the last of the
problems (I hope) observed during testing of the new atomic xattr
update feature.
- Fix statfs blocking on background inode gc workers
- Fix some broken inode lock assertion code
- Fix xattr leaf buffer leaks when cancelling a deferred xattr update
operation
- Clean up xattr recovery to make it easier to understand.
- Fix xattr leaf block verifiers tripping over empty blocks.
- Remove complicated and error prone xattr leaf block bholding mess.
- Fix a bug where an rt extent crossing EOF was treated as "posteof"
blocks and cleaned unnecessarily.
- Fix a UAF when log shutdown races with unmount"
* tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent a UAF when log IO errors race with unmount
xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
xfs: don't hold xattr leaf buffers across transaction rolls
xfs: empty xattr leaf header blocks are not corruption
xfs: clean up the end of xfs_attri_item_recover
xfs: always free xattri_leaf_bp when cancelling a deferred op
xfs: use invalidate_lock to check the state of mmap_lock
xfs: factor out the common lock flags assert
xfs: introduce xfs_inodegc_push()
xfs: bound maximum wait time for inodegc work
The compatible “mediatek,mt8192-disp-rdma” is being used for reading
the data into DMA for back-end panel driver in mt8192 but there is
no difference between mt8183 and mt8192 in rdma driver.
Remove compatible “mediatek,mt8192-disp-rdma” from the driver and
should use “mediatek,mt8183-disp-rdma” as fallback in 8192 DTS
according to the mediatek,rdma.yaml.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701090547.21429-2-allen-kh.cheng@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
hasdata does not need to be initialized to zero. It will be assigned a
value in the following judgment conditions.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLBZ3sTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXe2oB/wJ1T3/1tZ0+Jx7Hk84MXUTO9W05KqH
sie+yehu9A5+RNlA6/zRJBEmA4pyvOjtN0qynh3f25LfIesxUC5Tma1Epzp/Gnay
cYBrypD2iKKMNpJoiBtVVXh6Kin7+5oSLr4zxeaYcXjGfUlPIOqMnrwbGu/5ZtMH
7FL092tkQ/S1j/LDTiZk+OdjpuaM9D/7Z0t0iJ6NJb70/VEk6K3bY5XdmjLayYIJ
IBmxBbUXvBevVRDiSyMqNzA+RzQ5egrTrE3gPZZPneISN3Qu6cG+5xUqYGOxyjrJ
hzinoC48wEEHEMAeiM28AXjv9voIPvSoqeOvgZmSS0JTkfPZqirYpdzd
=9458
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.20-20220703' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-03
this is a pull request of 15 patches for net-next/master.
The first 2 patches are by Max Staudt and add the can327 serial CAN
driver along with a new line discipline ID.
The next patch is by me an fixes a typo in the ctucanfd driver.
The last 12 patches are by Dario Binacchi and integrate slcan CAN
serial driver better into the existing CAN driver API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Insufficient validation of element datatype and length in
nft_setelem_parse_data(). At least commit 7d7402642e updates
maximum element data area up to 64 bytes when only 16 bytes
where supported at the time. Support for larger element size
came later in fdb9c405e3 though. Picking this older commit
as Fixes: tag to be safe than sorry.
2) Memleak in pipapo destroy path, reproducible when transaction
in aborted. This is already triggering in the existing netfilter
test infrastructure since more recent new tests are covering this
path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Mi Says:
==============
Remove dependency between sriov and eswitch mode
Currently, there are three eswitch modes, none, legacy and
switchdev. None is the default mode. And when disabling sriov,
current eswitch mode will be changed to none. This patchset
removes eswitch mode none and also removes dependency between
sriov and eswitch mode. With this patchset, there are two
behavior changes:
Original behavior
-----------------
- When driver is loaded without sriov enabled, none is the default
mode. But actually eswitch mode should be either legacy or
switchdev, so devlink will return unsupported when showing
eswitch mode.
- When disabling sriov in either legacy or switchdev mode, eswitch
mode will be changed to none.
New behavior
------------
- When driver is loaded, legacy will be the default mode.
- When disabling sriov in either legacy or switchdev mode, eswitch
mode will not be changed.
Jianbo Liu Says:
================
Add support offloading police action
This patchset supports offloading police action by flow meter ASO
object in hardware.
The first part is to add interfaces to create and destroy flow meter
ASO object, and modify meter parameters by ACCESS_ASO WQE. As multiple
objects are created at a time, and two meters are in one object,
bitmaps are used manage these meters in one creation.
Then the police action can be mapped to a meter by the action index.
After mlx5e tc action refactoring was merged and post_act table was
added, a simple tc flow with one police action is broken down into two
rules in hardware. One rule with the original match in the original
table, which performs a metadata rewrite and do metering, then jumps
to post_meter table. The second rule is placed in the post_act table
with all the actions left.
The rules in post_meter table match on the meter outcome. If the
outcome is GREEN, we merely jump back to the post_act table for
further processing. Otherwise, the outcome is RED, and we drop the
packet.
The last part is to support flow meter ASO object in sw steering.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmLAlVYACgkQSD+KveBX
+j4WIQgAlZ05LMUqBl+5qHy4sm1JCo9KkS8HuwmWH23OyRQy1thAozeK3oiJxoGB
K4LZMxiWCFTroNffPkBU2co+w1Y7ptXkcMkhXZ8dcrlTjaxqCM+HtZdJiu31ltZ/
IIgNbE73dMkjNBGqaCyWjzZtfOfuDbhq9cx7rntFelRZWNAXYpRpzZQ1Ioh0CDFL
y56b9nmtjPEgaIBmD5Jfv22eaQJ21u4Wk9lWZL3hkotYzmrAqyAXYNtaAhbMD4Dt
AxgwxcxO9vfEwxmdFNpE3FCN/0firkHL2jf356ff0DBWYSv3iXC0l2lL6YEQ8FCC
eND23Pih2mDi5GoUKsUJht6A5EBI0Q==
=u3de
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2022-06-29
Chris Mi Says:
==============
Remove dependency between sriov and eswitch mode
Currently, there are three eswitch modes, none, legacy and
switchdev. None is the default mode. And when disabling sriov,
current eswitch mode will be changed to none. This patchset
removes eswitch mode none and also removes dependency between
sriov and eswitch mode. With this patchset, there are two
behavior changes:
Original behavior
-----------------
- When driver is loaded without sriov enabled, none is the default
mode. But actually eswitch mode should be either legacy or
switchdev, so devlink will return unsupported when showing
eswitch mode.
- When disabling sriov in either legacy or switchdev mode, eswitch
mode will be changed to none.
New behavior
------------
- When driver is loaded, legacy will be the default mode.
- When disabling sriov in either legacy or switchdev mode, eswitch
mode will not be changed.
Jianbo Liu Says:
================
Add support offloading police action
This patchset supports offloading police action by flow meter ASO
object in hardware.
The first part is to add interfaces to create and destroy flow meter
ASO object, and modify meter parameters by ACCESS_ASO WQE. As multiple
objects are created at a time, and two meters are in one object,
bitmaps are used manage these meters in one creation.
Then the police action can be mapped to a meter by the action index.
After mlx5e tc action refactoring was merged and post_act table was
added, a simple tc flow with one police action is broken down into two
rules in hardware. One rule with the original match in the original
table, which performs a metadata rewrite and do metering, then jumps
to post_meter table. The second rule is placed in the post_act table
with all the actions left.
The rules in post_meter table match on the meter outcome. If the
outcome is GREEN, we merely jump back to the post_act table for
further processing. Otherwise, the outcome is RED, and we drop the
packet.
The last part is to support flow meter ASO object in sw steering.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dario Binacchi says:
====================
This series originated as a result of CAN communication tests for an
application using the USBtin adapter (https://www.fischl.de/usbtin/).
The tests showed some errors but for the driver everything was ok.
Also, being the first time I used the slcan driver, I was amazed that
it was not possible to configure the bitrate via the ip tool.
For these two reasons, I started looking at the driver code and realized
that it didn't use the CAN network device driver interface.
Starting from these assumptions, I tried to:
- Use the CAN network device driver interface.
- Set the bitrate via the ip tool.
- Send the open/close command to the adapter from the driver.
- Add ethtool support to reset the adapter errors.
- Extend the protocol to forward the adapter CAN communication
errors and the CAN state changes to the netdev upper layers.
Except for the protocol extension patches (i. e. forward the adapter CAN
communication errors and the CAN state changes to the netdev upper
layers), the whole series has been tested under QEMU with Linux 4.19.208
using the USBtin adapter.
Testing the extension protocol patches requires updating the adapter
firmware. Before modifying the firmware I think it makes sense to know if
these extensions can be considered useful.
Before applying the series I used these commands:
slcan_attach -f -s6 -o /dev/ttyACM0
slcand ttyACM0 can0
ip link set can0 up
After applying the series I am using these commands:
slcan_attach /dev/ttyACM0
slcand ttyACM0 can0
ip link set dev can0 down
ip link set can0 type can bitrate 500000
ethtool --set-priv-flags can0 err-rst-on-open on
ip link set dev can0 up
Now there is a clearer separation between serial line and CAN,
but above all, it is possible to use the ip and ethtool commands
as it happens for any CAN device driver. The changes are backward
compatible, you can continue to use the slcand and slcan_attach
command options.
Changes in v5:
- Update the commit message.
- Restore the use of rtnl_lock() and rtnl_unlock().
Changes in v4:
- Move the patch in front of the patch "[v3,04/13] can: slcan: use CAN network device driver API".
- Add the CAN_BITRATE_UNSET (0) and CAN_BITRATE_UNKNOWN (-1U) macros.
- Simplify the bitrate check to dump it.
- Update the commit description.
- Update the commit description.
- Use the CAN_BITRATE_UNKNOWN macro.
- Use kfree_skb() instead of can_put_echo_skb() in the slc_xmit().
- Remove the `if (slcan_devs)' check in the slc_dealloc().
- Replace `sl->tty == NULL' with `!sl->tty'.
- Use CAN_BITRATE_UNSET (0) and CAN_BITRATE_UNKNOWN (-1U) macros.
- Don't reset the bitrate in ndo_stop() if it has been configured.
- Squashed to the patch [v3,09/13] can: slcan: send the close command to the adapter.
- Use the CAN_BITRATE_UNKNOWN macro.
- Add description of slc_bump_err() function.
- Remove check for the 'e' character at the beggining of the function.
It was already checked by the caller function.
- Protect decoding against the case the len value is longer than the
received data.
- Some small changes to make the decoding more readable.
- Increment all the error counters at the end of the function.
- Add description of slc_bump_state() function.
- Remove check for the 's' character at the beggining of the function.
It was already checked by the caller function.
- Protect decoding against the case the frame len is longer than the
received data (add SLC_STATE_FRAME_LEN macro).
- Set cf to NULL in case of alloc_can_err_skb() failure.
- Some small changes to make the decoding more readable.
- Use the character 'b' instead of 'f' for bus-off state.
Changes in v3:
- Increment the error counter in case of decoding failure.
- Replace (-1) with (-1U) in the commit description.
- Update the commit description.
- Remove the slc_do_set_bittiming().
- Set the bitrate in the ndo_open().
- Replace -1UL with -1U in setting a fake value for the bitrate.
- Drop the patch "can: slcan: simplify the device de-allocation".
- Add the patch "can: netlink: dump bitrate 0 if can_priv::bittiming.bitrate is -1U".
Changes in v2:
- Put the data into the allocated skb directly instead of first
filling the "cf" on the stack and then doing a memcpy().
- Move CAN_SLCAN Kconfig option inside CAN_DEV scope.
- Improve the commit message.
- Use the CAN framework support for setting fixed bit rates.
- Improve the commit message.
- Protect decoding against the case the len value is longer than the
received data.
- Continue error handling even if no skb can be allocated.
- Continue error handling even if no skb can be allocated.
====================
Link: https://lore.kernel.org/all/20220628163137.413025-1-dario.binacchi@amarulasolutions.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds a private flag to the slcan driver to switch the
"err-rst-on-open" setting on and off.
"err-rst-on-open" on - Reset error states on opening command
"err-rst-on-open" off - Don't reset error states on opening command
(default)
The setting can only be changed if the interface is down:
ip link set dev can0 down
ethtool --set-priv-flags can0 err-rst-on-open {off|on}
ip link set dev can0 up
Link: https://lore.kernel.org/all/20220628163137.413025-11-dario.binacchi@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In case the bitrate has been set via ip tool, this patch changes the
driver to send the open ("O\r") and close ("C\r) commands to the
adapter.
Link: https://lore.kernel.org/all/20220628163137.413025-9-dario.binacchi@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
