Function bias_combo getter/setters already handle all cases advanced drive
configuration, include drive for I2C related pins.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-5-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on mt8192.
2. Also add the missing pull type array for mt8192 to document the
pull type of each pin and prevent invalid pull type settings.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-4-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch provides the advanced drive raw data setting version
for I2C used pins on mt8192.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-3-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. The dt-binding expects that drive-strength arguments be passed
in mA, but the driver was expecting raw values. And that this
commit changes the driver so that it is aligned with the binding.
2. This commit provides generic driving setup, which support
2/4/6/8/10/12/14/16mA driving, original driver just set raw data
setup setting when use drive-strength property.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-2-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. The bcm2835 pinctrl is also affected by this
warning.
Fix this by making the irqchip in the bcm2835 pinctrl driver immutable.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit b8a19382ac ("pinctrl: bcm2835: Fix support for threaded level
triggered IRQs") assigned the irq_mask/unmask callbacks with the
already existing functions for irq_enable/disable. The wasn't completely
the right way (tm) to fix the issue, because these callbacks shouldn't
be identical. So fix this by rename the functions to represent their
intension and drop the unnecessary irq_enable/disable assigment.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Maintainers of the directory Documentation/devicetree/bindings/pinctrl
are also the maintainers of the corresponding directory
include/dt-bindings/pinctrl.
Add the file entry for include/dt-bindings/pinctrl to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613122955.20714-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the
function was never assigned to the pingroup (even though the function
exists already).
Add this mode to the related pins.
Fixes: 5373a2c5ab ("pinctrl: qcom: Add msm8916 pinctrl driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220612145955.385787-4-nikita@trvn.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update lpass lpi pin control driver, with clock optional check for ADSP
disabled platforms. This check required for distingushing ADSP based
platforms and ADSP bypass platforms.
In case of ADSP enabled platforms, where audio is routed through ADSP
macro and decodec GDSC Switches are triggered as clocks by pinctrl
driver and ADSP firmware controls them. So It's mandatory to enable
them in ADSP based solutions.
In case of ADSP bypass platforms clock voting is optional as these macro
and dcodec GDSC switches are maintained as power domains and operated from
lpass clock drivers.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add boolean param qcom,adsp-bypass-mode to support adsp bypassed sc7280
platforms. Which is required to make clock voting as optional for ADSP
bypass platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.
Commit 3fdc7d3fe4 ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.
Now I realized I had applied a wrong patch.
In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".
In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".
Restore the code I intended in v1.
[1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/
Fixes: 3fdc7d3fe4 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-6-dmitry.baryshkov@linaro.org
Move clock parent tables down, after the MMPLL declrataions, so that we
can use gpll hw clock fields in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-5-dmitry.baryshkov@linaro.org
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-4-dmitry.baryshkov@linaro.org
there is an unexpected word "the" in the comments that need to be dropped
> * will cause the the boot stages to enter download mode, unless
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621094924.83135-1-jiangjian@cdjrlc.com
Add device tree node corresponding to the ITS part of GICv3.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220502192604.272686-1-dmitry.baryshkov@linaro.org
The sleep/wake state doesn't need to be set here because of specific
RPMh behavior that carries over the active state when sleep/wake state
hasn't been modified. Add a note to the code so we aren't tempted to set
the sleep/wake states.
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517190949.2922197-1-swboyd@chromium.org
Some sc7180 Chromebooks actually have sc7180P (known by many names,
apparently, including possibly sc7180 Pro and sc7185). This is a
sc7180 part that has slightly higher clock speeds.
The official ID number allocated to these devices by Qualcomm is 495
so we'll add an entry to the table for them. Note that currently
shipping BIOS for these devices will actually end up reporting an ID
of 407 due to a bug but eventually a new BIOS will be released which
corrects it to 495.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523085437.v3.1.I26eca1856f99e6160d30de6d50ecab60e6226354@changeid
Switch f2fs over to the functions that are replacing
fscrypt_set_test_dummy_encryption(). Since f2fs hasn't been converted
to the new mount API yet, this doesn't really provide a benefit for
f2fs. But it allows fscrypt_set_test_dummy_encryption() to be removed.
Also take the opportunity to eliminate an #ifdef.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYrcekA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynZVgCfZUqV4hyGIWbDjupQHIu5FrAUdisAn0Aaa77q
AHJe7E9jq//3mZ/TRYMw
=pwsw
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull IIO driver fixes from Greg KH:
"Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
testing:
- Fix a missing MODULE_LICENSE() warning by restricting possible
build configs.
Various drivers:
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
adi,admv1014:
- Fix dubious x & !y warning.
adi,axi-adc:
- Fix missing of_node_put() in error and normal paths.
aspeed,adc:
- Add missing of_node_put()
fsl,mma8452:
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset
as ACK will be missing (device reset before sending it).
fsl,vf610:
- Fix documentation of in_conversion_mode ABI.
iio-trig-sysfs:
- Ensure irq work has finished before freeing the trigger.
invensense,mpu3050:
- Disable regulators in error path.
invensense,icm42600:
- Fix collision of enum value of 0 with error path where 0 is no
match.
renesas,rzg2l_Adc:
- Add missing fwnode_handle_put() in error path.
rescale:
- Fix a boolean logic bug for detection of raw + scale affecting
an obscure corner case.
semtech,sx9324:
- Check return value of read of pin_defs
st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't
expose the vref_int channel.
- Fix maximum clock rate for stm32pm15x
ti,ads131e08:
- Add missing fwnode_handle_put() in error paths.
xilinx,ams:
- Fix variable checked for error from platform_get_irq()
x-powers,axp288:
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
yamaha,yas530:
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
Here are some small USB driver fixes and new device ids for 5.19-rc4 for
a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYrcd/Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yncSACgltyfiCy+kOL5NWis+JxE0Itn+/EAnRlfkm41
+NMH4Tz2FNgGR6FN4988
=hu3T
-----END PGP SIGNATURE-----
Merge tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc4
for a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: udc: check request status before setting device address
USB: gadget: Fix double-free bug in raw_gadget driver
xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
xhci: turn off port power in shutdown
xhci: Keep interrupt disabled in initialization until host is running.
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: pl2303: add support for more HXN (G) types
usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
usb: gadget: uvc: fix list double add in uvcg_video_pump
dt-bindings: usb: ehci: Increase the number of PHYs
dt-bindings: usb: ohci: Increase the number of PHYs
usb: gadget: Fix non-unique driver names in raw-gadget driver
MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
USB: serial: option: add Telit LE910Cx 0x1250 composition
1. Getting next index before continue branch.
2. Checking free bits when setting the target bits. Otherwise,
it may reuse the busying bits.
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20220605145835.26916-1-wuchi.zero@gmail.com
Fixes: 9672b0d437 ("sbitmap: add __sbitmap_queue_get_batch()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This includes some urgent fixes to avoid generating corrupted inodes
caused by compressed and inline_data files. In addition, another patch
tries to avoid wrong error report which prevents a roll-forward
recovery.
-----BEGIN PGP SIGNATURE-----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=m3Fh
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Some urgent fixes to avoid generating corrupted inodes caused by
compressed and inline_data files.
In addition, avoid a wrong error report which prevents a roll-forward
recovery"
* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: do not count ENOENT for error case
f2fs: fix iostat related lock protection
f2fs: attach inline_data after setting compression
Frank Jungclaus says:
====================
All following 5 patches must be seen as preparation for adding support
of the newly available esd CAN-USB/3 to esd_usb2.c.
After having gained some confidence and experience on sending patches
to linux-can@vger.kernel.org, I'll again submit the code changes for
CAN-USB/3 support as step #2.
====================
Link: https://lore.kernel.org/all/20220624190517.2299701-1-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Brought the copyright notice up to date
- Also regarding the changed company name from
esd electronic system design gmbh to esd electronics gmbh
- Using socketcan@esd.eu as a generic mail address for matthias who
left esd 6 years before
- Added a second MODULE_AUTHOR() for Frank Jungclaus
Link: https://lore.kernel.org/all/20220624190517.2299701-6-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Each occurrence of the term "usb2" within variables, function names,
comments, etc. is changed to "usb" where it is shared for all
esd CAN/USB devices.
Link: https://lore.kernel.org/all/20220624190517.2299701-4-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As suggested by Vincent, renaming of esd_usb2.c to esd_usb.c
and according to that, adaption of Kconfig and Makfile, too.
Link: https://lore.kernel.org/all/20220624190517.2299701-2-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
compute_return_era() always returns 0, make it return void,
and then no need to check its return value for its callers.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the configuration information accessible by the CPUCFG
instruction in LoongArch Reference Manual [1], FP_ver is stored in
bit [5: 3] of CPUCFG2, the current code to get fpu version is wrong,
use CPUCFG2_FPVERS to fix it.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
setup_tlb_handler() is expected to set per-cpu exception handlers, but
it only set the TLBRENTRY successfully because of copy & paste errors,
so fix it.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
_stext means the start of .text section (see __is_kernel_text()), but we
put its definition in .ref.text by mistake. Fix it by defining it in the
vmlinux.lds.S.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Fix the !THP build by making pmd_pfn() available in all configurations.
Because pmd_pfn() is used in mm/page_vma_mapped.c whether or not THP is
configured.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Buffer split_desc_cache, the cache used to allcoate rmap list entries,
only by the default cache capacity (currently 40), not by doubling the
minimum (513). Aliasing L2 GPAs to L1 GPAs is uncommon, thus eager page
splitting is unlikely to need 500+ entries. And because each object is a
non-trivial 128 bytes (see struct pte_list_desc), those extra ~500
entries means KVM is in all likelihood wasting ~64kb of memory per VM.
Link: https://lore.kernel.org/all/YrTDcrsn0%2F+alpzf@google.com
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220624171808.2845941-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an "unsigned int" for @access parameters instead of a "u32", mostly
to be consistent throughout KVM, but also because "u32" is misleading.
@access can actually squeeze into a u8, i.e. doesn't need 32 bits, but is
as an "unsigned int" because sp->role.access is an unsigned int.
No functional change intended.
Link: https://lore.kernel.org/all/YqyZxEfxXLsHGoZ%2F@google.com
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220624171808.2845941-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I accidentally broke IPv4 traceroute, by swapping iph->saddr
and iph->daddr.
Probably because raw_icmp_error() and raw_v4_input()
use different order for iph->saddr and iph->daddr.
Fixes: ba44f8182e ("raw: use more conventional iterators")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220623193540.2851799-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different model
- documentation fixes
- MAINTAINERS file updates
-----BEGIN PGP SIGNATURE-----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=0wLZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different
model
- documentation fixes
- MAINTAINERS file updates
* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mxs: Fix header comment
gpio: Fix kernel-doc comments to nested union
gpio: grgpio: Fix device removing
gpio: winbond: Fix error code in winbond_gpio_get()
gpio: realtek-otto: Make the irqchip immutable
docs: driver-api: gpio: Fix filename mismatch
MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM
The "1<<31" shift has a sign extension bug so IFF_TX_SKB_NO_LINEAR is
0xffffffff80000000 instead of 0x0000000080000000.
Fixes: c2ff53d804 ("net: Add priv_flags for allow tx skb without linear")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/YrRrcGttfEVnf85Q@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
