Introduce a new feature bit for virtualized x2APIC (x2AVIC) in
CPUID_Fn8000000A_EDX [SVM Revision and Feature Identification].
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220519102709.24125-2-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IBS support has been enhanced with two new features in upcoming uarch:
1. DataSrc extension
2. L3 miss filtering.
Additional set of bits has been introduced in IBS registers to exploit
these features.
New bits are already defining in arch/x86/ header. Sync it with tools
header file. Also rename existing ibs_op_data field 'data_src' to
'data_src_lo'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-8-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PMUs advertise their capabilities via sysfs attribute files but
the perf tool currently parses only core(CPU) or hybrid core PMU
capabilities. Add support of recording non-core PMU capabilities
int perf.data header.
Note that a newly proposed HEADER_PMU_CAPS is replacing existing
HEADER_HYBRID_CPU_PMU_CAPS. Special care is taken for hybrid core
PMUs by writing their capabilities first in the perf.data header
to make sure new perf.data file being read by old perf tool does
not break.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-6-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently all capabilities are stored in a single string separated by
NULL character. Instead, store them in an array which makes searching of
capability easier.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-5-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid unnecessary conditional code to check if pmu name is NULL
or not by passing "cpu" pmu name to the printing function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-4-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to returning nr_caps, cache it locally in struct perf_pmu.
Similarly, cache status of whether caps sysfs has already been parsed
or not. These will help to avoid parsing sysfs every time the function
gets called.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-3-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Samples without an L3 miss are discarded and counter is reset with
random value (between 1-15 for fetch PMU and 1-127 for op PMU) when IBS
L3 miss filtering is enabled. This causes a sampling period skew but
there is no way to reconstruct aggregated sampling period. So print a
warning at perf record if user sets l3missonly=1.
Ex:
# perf record -c 10000 -C 0 -e ibs_op/l3missonly=1/
WARNING: Hw internally resets sampling period when L3 Miss Filtering is enabled
and tagged operation does not cause L3 Miss. This causes sampling period skew.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20220604044519.594-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We no longer need to call into the kernel to map the FDT before calling
into the kernel so let's drop the helpers we added for this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-22-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, when KASLR is in effect, we set up the kernel virtual address
space twice: the first time, the KASLR seed is looked up in the device
tree, and the kernel virtual mapping is torn down and recreated again,
after which the relocations are applied a second time. The latter step
means that statically initialized global pointer variables will be reset
to their initial values, and to ensure that BSS variables are not set to
values based on the initial translation, they are cleared again as well.
All of this is needed because we need the command line (taken from the
DT) to tell us whether or not to randomize the virtual address space
before entering the kernel proper. However, this code has expanded
little by little and now creates global state unrelated to the virtual
randomization of the kernel before the mapping is torn down and set up
again, and the BSS cleared for a second time. This has created some
issues in the past, and it would be better to avoid this little dance if
possible.
So instead, let's use the temporary mapping of the device tree, and
execute the bare minimum of code to decide whether or not KASLR should
be enabled, and what the seed is. Only then, create the virtual kernel
mapping, clear BSS, etc and proceed as normal. This avoids the issues
around inconsistent global state due to BSS being cleared twice, and is
generally more maintainable, as it permits us to defer all the remaining
DT parsing and KASLR initialization to a later time.
This means the relocation fixup code runs only a single time as well,
allowing us to simplify the RELR handling code too, which is not
idempotent and was therefore required to keep track of the offset that
was applied the first time around.
Note that this means we have to clone a pair of FDT library objects, so
that we can control how they are built - we need the stack protector
and other instrumentation disabled so that the code can tolerate being
called this early. Note that only the kernel page tables and the
temporary stack are mapped read-write at this point, which ensures that
the early code does not modify any global state inadvertently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-21-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The early KASLR init code runs extremely early, and anything that could
be deferred until later should be. So let's defer the randomization of
the module region until much later - this also simplifies the
arithmetic, given that we no longer have to reason about the link time
vs load time placement of the core kernel explicitly. Also get rid of
the global status variable, and infer the status reported by the
diagnostic print from other KASLR related context.
While at it, get rid of the special case for KASAN without
KASAN_VMALLOC, which never occurs in practice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-20-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to avoid having to touch memory with the MMU and caches
disabled, and therefore having to invalidate it from the caches
explicitly, just defer storing the value until after the MMU has been
turned on, unless we are giving up with an error.
While at it, move the associated variable definitions into C code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-19-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we can access the entire kernel image via the ID map, we can
execute the page table population code with the MMU and caches enabled.
The only thing we need to ensure is that translations via TTBR1 remain
disabled while we are updating the page tables the second time around,
in case KASLR wants them to be randomized.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-18-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Create a macro load_ttbr1 to avoid having to repeat the same instruction
sequence 3 times in a subsequent patch. No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-17-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Instead of calling into the kernel to map the FDT into the kernel page
tables before even calling start_kernel(), let's switch to the initial,
temporary mapping of the device tree that has been added to the ID map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-16-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We need to access the DT very early to get at the command line and the
KASLR seed, which currently means we rely on some hacks to call into the
kernel before really calling into the kernel, which is undesirable.
So instead, let's create a mapping for the FDT in the initial ID map,
which is feasible now that it has been extended to cover more than a
single page or block, and can be updated in place to remap other output
addresses.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-15-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Formerly, we had to access the RELA and RELR tables via the kernel
mapping that was being relocated, and so deriving the start and end
addresses using ADRP/ADD references was not possible, as the relocation
code runs from the ID map.
Now that we map the entire kernel image via the ID map, we can simplify
this, and just load the entries via the ID map as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-14-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As a first step towards avoiding the need to create, tear down and
recreate the kernel virtual mapping with MMU and caches disabled, start
by expanding the ID map so it covers the page tables as well as all
executable code. This will allow us to populate the page tables with the
MMU and caches on, and call KASLR init code before setting up the
virtual mapping.
Since this ID map is only needed at boot, create it as a temporary set
of page tables, and populate the permanent ID map after enabling the MMU
and caches. While at it, switch to read-only attributes for the where
possible, as writable permissions are only needed for the initial kernel
page tables. Note that on 4k granule configurations, the permanent ID
map will now be reduced to a single page rather than a 2M block mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-13-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The asm macros used to create the initial ID map and kernel mappings
don't support randomly remapping parts of the address space after it has
been populated. What we can do, however, given that all block or page
mappings are created at the final level, is take a subset of the mapped
range and update its attributes or output address. This will permit us
to make parts of these page tables read-only, or remap a part of it to
cover the device tree.
So add a helper that encapsulates this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-12-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for changing the way we initialize the permanent ID map,
update cpu_replace_ttbr1() so we can use it with the initial ID map as
well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-11-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We will be adding an initial ID map that covers the entire kernel image,
so we will pass the actual ID map root table to use to __enable_mmu(),
rather than hard code it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-10-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Some early boot code runs before the virtual placement of the kernel is
finalized, and we used to go back to the very start and recreate the ID
map along with the page tables describing the virtual kernel mapping,
and this involved setting some global variables with the caches off.
In order to ensure that global state created by the KASLR code is not
corrupted by the cache invalidation that occurs in that case, we needed
to clean those global variables to the PoC explicitly.
This is no longer needed now that the ID map is created only once (and
the associated global variable updates are no longer repeated). So drop
the cache maintenance that is no longer necessary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-9-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Split off the creation of the ID map page tables, so that we can avoid
running it again unnecessarily when KASLR is in effect (which only
randomizes the virtual placement). This will permit us to drop some
explicit cache maintenance to the PoC which was necessary because the
cache invalidation being performed on some global variables might
otherwise clobber unrelated variables that happen to share a cacheline.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-8-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In a future patch, we will start using an ID map that covers the entire
image, rather than a single page. This means that we need to deal with
the pathological case of an extended ID map where the kernel image does
not fit neatly inside a single entry at the root level, which means we
will need to create additional table entries and map additional pages
for page tables.
The existing map_memory macro already takes care of most of that, so
let's just extend it to deal with this case as well. While at it, drop
the conditional branch on the value of T0SZ: we don't set the variable
anymore in the entry code, and so we can just let the map_memory macro
deal with the case where the output address exceeds VA_BITS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-7-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Simplify the macros in head.S that are used to set up the early page
tables, by switching to immediates for the number of bits that are
interpreted as the table index at each level. This makes it much
easier to infer from the instruction stream what is going on, and
reduces the number of instructions emitted substantially.
Note that the extended ID map for cases where no additional level needs
to be configured now uses a compile time size as well, which means that
we interpret up to 10 bits as the table index at the root level (for
52-bit physical addressing), without taking into account whether or not
this is supported on the current system. However, those bits can only
be set if we are executing the image from an address that exceeds the
48-bit PA range, and are guaranteed to be cleared otherwise, and given
that we are dealing with a mapping in the lower TTBR0 range of the
address space, the result is therefore the same as if we'd mask off only
6 bits.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-6-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The assignment of idmap_ptrs_per_pgd lacks any cache invalidation, even
though it is updated with the MMU and caches disabled. However, we never
bother to read the value again except in the very next instruction, and
so we can just drop the variable entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-5-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Setting idmap_t0sz involves fiddling with the caches if done with the
MMU off. Since we will be creating an initial ID map with the MMU and
caches off, and the permanent ID map with the MMU and caches on, let's
move this assignment of idmap_t0sz out of the startup code, and replace
it with a macro that simply issues the three instructions needed to
calculate the value wherever it is needed before the MMU is turned on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-4-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, we only support 52-bit virtual addressing on 64k pages
configurations, and in all other cases, vabits_actual is guaranteed to
equal VA_BITS (== VA_BITS_MIN). So get rid of the variable entirely in
that case.
While at it, move the assignment out of the asm entry code - it has no
need to be there.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This variable definition does not need to be in head.S so move it out.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use memcpy_toio and memcpy_fromio variants of memcpy to guarantee no
unaligned access to IPC memory area. This is to allow the IPC memory to
be mapped as Device memory to further suppress speculative reads from
happening within the 64 kB memory area above the IPC memory when 64 kB
memory pages are used.
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rely on try_cmpxchg64 for re-reading the PID on failure, using READ_ONCE
only right before the first iteration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add dma_release_coherent_memory to DMA API to allow dma
user call it to release dev->dma_mem when the device is
removed.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220422062436.14384-2-mark-pk.tsai@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The example in audio-graph-card2.c has multiple nodes with the same name
in it. Change the port numbers to get different names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some functions that were missed by commit d77e745613 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.
The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.
Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e745613 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.
But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.
Also is a fragile assumption to make so is better to make it fail earlier.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e745613 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.
Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/gpu/drm/logicvc/logicvc_layer.c:616:2-13: ERROR: probable double put.
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
Generated by: scripts/coccinelle/iterators/device_node_continue.cocci
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.22.394.2206121300120.3447@hadrien
madera_adsp_rate_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the
value is changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
madera_out1_demux_put returns the value of
snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for
the kcontrol. This is obviously different to the expected return a 1 if
the control was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs47l15_in1_adc_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mixer controls for ASP TX3/4 are set to values that are not included
in their enumeration control. This will cause spurious event
notifications when the controls are first changed, as the register value
changes whilst the actual visible enumeration value does not. Use the
register patch to set them to a known value, zero, which equates to zero
fill, thereby avoiding the spurious notifications.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM keeps a copy of the current value of mux/demux controls,
however this value is only initialised in the case of autodisable
controls. This leads to false notification events when first
modifying a DAPM kcontrol that has a non-zero default.
Autodisable controls are left as they are, since they already
initialise the value, and there would be more work required to
support autodisable muxes where the first option isn't disabled
and/or that isn't the default.
Technically this issue could affect mixer/switch elements as well,
although not on any of the devices I am currently running. There
is also a little more work to do to address the issue there due to
that side supporting stereo controls, so that has not been tackled
in this patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
