Commit 2fb4706057 ("powerpc: add support for folded p4d page tables")
erroneously changed PUD setup to a mix of PMD and PUD. Fix it.
While at it, use PTE_TABLE_SIZE instead of PAGE_SIZE for PTE tables
in order to avoid any confusion.
Fixes: 2fb4706057 ("powerpc: add support for folded p4d page tables")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/95ddfd6176d53e6c85e13bd1c358359daa56775f.1655974558.git.christophe.leroy@csgroup.eu
kasan detects access beyond the end of the xibm->bitmap allocation:
BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140
Read of size 8 at addr c00000001d1d0118 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28
Call Trace:
[c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable)
[c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710
[c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354
[c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0
[c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140
[c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260
[c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450
[c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118
[c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac
[c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640
[c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0
[c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64
Allocated by task 0:
kasan_save_stack+0x34/0x70
__kasan_kmalloc+0xb4/0xf0
__kmalloc+0x268/0x540
xive_spapr_init+0x4d0/0x77c
pseries_init_irq+0x40/0x27c
init_IRQ+0x44/0x84
start_kernel+0x2a4/0x538
start_here_common+0x1c/0x20
The buggy address belongs to the object at c00000001d1d0118
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
8-byte region [c00000001d1d0118, c00000001d1d0120)
The buggy address belongs to the physical page:
page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d
flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff)
raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480
raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc
^
c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc
c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc
This happens because the allocation uses the wrong unit (bits) when it
should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small
numbers of bits, the allocated object can be smaller than sizeof(long),
which results in invalid accesses.
Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with
bitmap_free() for consistency.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220623182509.3985625-1-nathanl@linux.ibm.com
In the CONFIG_MEMREGION=n case, memregion_free() is meant to be a static
inline. 0day reports:
In file included from drivers/cxl/core/port.c:4:
include/linux/memregion.h:19:6: warning: no previous prototype for
function 'memregion_free' [-Wmissing-prototypes]
Mark memregion_free() static.
Fixes: 33dd70752c ("lib: Uplevel the pmem "region" ida to a global allocator")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/165601455171.4042645.3350844271068713515.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fixes for v5.19-rc4
- Workaround for parade DSI bridge power sequencing
- Fix for multi-planar YUV format offsets
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a being hit frequently
in CI.
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to address
bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring interrupt
mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
- Fix to ensure mmap offset is initialized to avoid memory corruption
from unpin/evict
- Fix double runpm disable in probe-defer path
- VMA fenced-unpin fixes
- Fix for WB max-width
- Fix for rare dp resolution change issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvdsOF1-+WfTWyEyu33XPcvxOCU00G-dz7EF2J+fdyUHg@mail.gmail.com
drm/i915 fixes for v5.19-rc4:
- Revert low voltage SKU check removal to fix display issues
- Apply PLL DCO fraction workaround for ADL-S
- Don't show engine classes not present in client fdinfo
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6a4syrr.fsf@intel.com
properly split the driver between hardware capabilities that wasn't done
properly causing multiple crashes; and a panel quirk for Aya Neo Next
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYrQLBgAKCRDj7w1vZxhR
xbnyAQD1yHRWhf+v17f7xpfIPF8lyqymGuUgfntUBQ9wI2YRvQD/YegLrkRiqtov
BQ4KkWzzxMS6Pa+U86LCIGFYSxD00AA=
=viZ2
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2022-06-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes in sun4i for suspend, DDC, DMA setup; A rework of vc4 to
properly split the driver between hardware capabilities that wasn't done
properly causing multiple crashes; and a panel quirk for Aya Neo Next
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623064152.ubjmnpj7tdejdcw6@houat
Add Renesas RZ/N1 SOC family support to the Renesas R-Car Gen2 PCI bridge
driver.
The Renesas RZ/N1 SOC internal PCI bridge is compatible with the one in the
R-Car Gen2 family.
Tested with the RZ/N1D (R9A06G032) SOC.
Link: https://lore.kernel.org/r/20220520094155.313784-4-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Add internal PCI bridge support for the R9A06G032 SOC. The Renesas RZ/N1D
(R9A06G032) internal PCI bridge is compatible with the one present in the
R-Car Gen2 family, but compared to R-Car Gen2, it needs three clocks
instead of one.
The 'resets' property is not required for the RZ/N1 family.
Link: https://lore.kernel.org/r/20220520094155.313784-3-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
This reverts commit 5089c4a8eb.
This breaks validation and enumeration of display capable modifiers.
The early return true means the rest of the validation code never gets
executed, and we need that to enumerate the right modifiers to userspace
for the format.
The modifiers that are in the initial list generated for a plane are the
superset for all formats and we need the proper checks in this function
to filter some of them out for formats with which they're invalid to be
used.
Furthermore, the safety contract here is that we validate the incoming
modifiers to ensure the kernel can handle them and the display hardware
can handle them. This includes e.g. rejecting multi-plane images with DCC.
Note that the legacy swizzle mechanism allows encoding more swizzles, and
at fb creation time we convert them to modifiers and reject those with
no corresponding modifiers. If we are seeing rejections I'm happy to
help define modifiers that correspond to those, or if absolutely needed
implement a fallback path to allow for less strict validation of the
legacy path.
However, I'd like to revert this patch, since any of these is going to
be a significant rework of the patch, and I'd rather not the regression
gets into a release or forgotten in the meantime.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dml_print message. Fix it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a pr_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 92020e81dd.
This causes stuttering and timeouts with DMCUB for some users
so revert it until we understand why and safely enable it
to save power.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1887
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
there is an unexpected word 'for' in the comments that need to be dropped
file - drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c
line - 245
* position and also advance the position for for Vega10
changed to:
* position and also advance the position for Vega10
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c:549:4: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation]
pll_req = dc_fixpt_from_int(pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_int);
^
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c:542:3: note: previous statement is here
else
^
1 warning generated.
Indent this statement to the left, as it was clearly intended to be
called unconditionally, which will fix the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1655
Fixes: 3e838f7ccf ("drm/amd/display: Get VCO frequency from registers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update MES API to support oversubscription without aggregated doorbell
for usermode queues.
v2: Change oversubscription_no_aggregated_en to is_kfd_process (align
with MES)
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting with GFX11, MES requires wptr BOs to be GTT allocated/mapped to
GART for usermode queues in order to support oversubscription. In the
case that work is submitted to an unmapped queue, MES must have a GART
wptr address to determine whether the queue should be mapped.
This change is accompanied with changes in MES and is applicable for
MES_API_VERSION >= 2.
v3:
- Use amdgpu_vm_bo_lookup_mapping for wptr_bo mapping lookup
- Move wptr_bo refcount increment to amdgpu_amdkfd_map_gtt_bo_to_gart
- Remove list_del_init from amdgpu_amdkfd_map_gtt_bo_to_gart
- Cleanup/fix create_queue wptr_bo error handling
v4:
- Add MES version shift/mask defines to amdgpu_mes.h
- Change version check from MES_VERSION to MES_API_VERSION
- Add check in kfd_ioctl_create_queue before wptr bo pin/GART map to
ensure bo is a single page.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store MES scheduler and MES KIQ version numbers in amdgpu_mes for GFX11.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1
When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.
v2:fix indentation
v3:change subject and fix indentation
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel uapi headers are supposed to use __[us]{8,16,32,64} types defined
by <linux/types.h> as opposed to 'uint32_t' and similar. See [1] for the
relevant discussion about this topic. In this particular case, the usage
of 'uint64_t' escaped headers_check as these macros are not being called
here. However, the following program triggers a compilation error:
#include <drm/drm_fourcc.h>
int main()
{
unsigned long x = AMD_FMT_MOD_CLEAR(RB);
return 0;
}
gcc error:
drm.c:5:27: error: ‘uint64_t’ undeclared (first use in this function)
5 | unsigned long x = AMD_FMT_MOD_CLEAR(RB);
| ^~~~~~~~~~~~~~~~~
This patch changes AMD_FMT_MOD_{SET,CLEAR} macros to use the correct
integer types, which fixes the above issue.
[1] https://lkml.org/lkml/2019/6/5/18
Fixes: 8ba16d5993 ("drm/fourcc: Add AMD DRM modifiers.")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver is about MXS GPIO support. MXC is a different platform.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The current blocking mechanism for pushing the inodegc queue out to
disk can result in systems becoming unusable when there is a long
running inodegc operation. This is because the statfs()
implementation currently issues a blocking flush of the inodegc
queue and a significant number of common system utilities will call
statfs() to discover something about the underlying filesystem.
This can result in userspace operations getting stuck on inodegc
progress, and when trying to remove a heavily reflinked file on slow
storage with a full journal, this can result in delays measuring in
hours.
Avoid this problem by adding "push" function that expedites the
flushing of the inodegc queue, but doesn't wait for it to complete.
Convert xfs_fs_statfs() and xfs_qm_scall_getquota() to use this
mechanism so they don't block but still ensure that queued
operations are expedited.
Fixes: ab23a77687 ("xfs: per-cpu deferred inode inactivation queues")
Reported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: fix _getquota_next to use _inodegc_push too]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently inodegc work can sit queued on the per-cpu queue until
the workqueue is either flushed of the queue reaches a depth that
triggers work queuing (and later throttling). This means that we
could queue work that waits for a long time for some other event to
trigger flushing.
Hence instead of just queueing work at a specific depth, use a
delayed work that queues the work at a bound time. We can still
schedule the work immediately at a given depth, but we no long need
to worry about leaving a number of items on the list that won't get
processed until external events prevail.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
When the last reference of a gem object is removed it is added to the
mm.free_list list and mm.free_work is queued to actually free the
object.
So gem objects that had their last reference removed by display during
drm_atomic_helper_shutdown() are added to mm.free_list what could
cause that mm.free_work is executed at the same time as
intel_runtime_pm_driver_release() causing raw-wakerefs warning.
So here only calling i915_gem_suspend() and by consequence
i915_gem_drain_freed_objects() only after display is down making
sure all display gem objecs are freed when
intel_runtime_pm_driver_release() is executed.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617190629.355356-1-jose.souza@intel.com
Commit 48ec13d36d ("gpio: Properly document parent data union")
is supposed to have fixed a warning from "make htmldocs" regarding
kernel-doc comments to union members. However, the same warning
still remains [1].
Fix the issue by following the example found in section "Nested
structs/unions" of Documentation/doc-guide/kernel-doc.rst.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 48ec13d36d ("gpio: Properly document parent data union")
Link: https://lore.kernel.org/r/20220606093302.21febee3@canb.auug.org.au/ [1]
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add a "flags" field to the "struct dw_edma_chip" so that the controller
drivers can pass flags that are relevant to the platform.
DW_EDMA_CHIP_LOCAL - Used by the controller drivers accessing eDMA
locally. Local eDMA access doesn't require generating MSIs to the remote.
Link: https://lore.kernel.org/r/20220524152159.2370739-8-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
In accordance with [1, 2] the DW eDMA controller has been created to be
part of the DW PCIe Root Port and DW PCIe End-point controllers and to
offload the transferring of large blocks of data between application and
remote PCIe domains leaving the system CPU free for other tasks. In the
first case (eDMA being part of DW PCIe Root Port) the eDMA controller is
always accessible via the CPU DBI interface and never over the PCIe wire.
The latter case is more complex. Depending on the DW PCIe End-Point IP-core
synthesize parameters it's possible to have the eDMA registers accessible
not only from the application CPU side, but also via mapping the eDMA CSRs
over a dedicated endpoint BAR. So based on the specifics denoted above the
eDMA driver is supposed to support two types of the DMA controller setups:
1) eDMA embedded into the DW PCIe Root Port/End-point and accessible over
the local CPU from the application side.
2) eDMA embedded into the DW PCIe End-point and accessible via the PCIe
wire with MWr/MRd TLPs generated by the CPU PCIe host controller.
Since the CPU memory resides different sides in these cases the semantics
of the MEM_TO_DEV and DEV_TO_MEM operations is flipped with respect to the
Tx and Rx DMA channels. So MEM_TO_DEV/DEV_TO_MEM corresponds to the Tx/Rx
channels in setup 1) and to the Rx/Tx channels in case of setup 2).
The DW eDMA driver has supported the case 2) since e63d79d1ff
("dmaengine: Add Synopsys eDMA IP core driver") in the framework of the
drivers/dma/dw-edma/dw-edma-pcie.c driver.
The case 1) support was added later by bd96f1b2f4 ("dmaengine: dw-edma:
support local dma device transfer semantics"). Afterwards the driver was
supposed to cover the both possible eDMA setups, but the latter commit
turned out to be not fully correct.
The problem was that the commit together with the new functionality support
also changed the channel direction semantics so the eDMA Read-channel
(corresponding to the DMA_DEV_TO_MEM direction for case 1) now uses the
sgl/cyclic base addresses as the Source addresses of the DMA transfers and
dma_slave_config.dst_addr as the Destination address of the DMA transfers.
Similarly the eDMA Write-channel (corresponding to the DMA_MEM_TO_DEV
direction for case 1) now uses dma_slave_config.src_addr as a source
address of the DMA transfers and sgl/cyclic base address as the Destination
address of the DMA transfers. This contradicts the logic of the
DMA-interface, which implies that DEV side is supposed to belong to the
PCIe device memory and MEM - to the CPU/Application memory. Indeed it seems
irrational to have the SG-list defined in the PCIe bus space, while
expecting a contiguous buffer allocated in the CPU memory. Moreover the
passed SG-list and cyclic DMA buffers are supposed to be mapped in a way so
to be seen by the DW eDMA Application (CPU) interface.
So in order to have the correct DW eDMA interface we need to invert the
eDMA Rd/Wr-channels and DMA-slave directions semantics by selecting the
src/dst addresses based on the DMA transfer direction instead of using the
channel direction capability.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v.5.40a, March 2019, p.1092
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
v.5.40a, March 2019, p.1189
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Fixes: bd96f1b2f4 ("dmaengine: dw-edma: support local dma device transfer semantics")
Link: https://lore.kernel.org/r/20220524152159.2370739-7-Frank.Li@nxp.com
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
The dma_slave_config.direction field usage in the DW eDMA driver was
introduced by bd96f1b2f4 ("dmaengine: dw-edma: support local dma device
transfer semantics"). Mainly the change introduced there was correct
(indeed DEV_TO_MEM means using RD-channel and MEM_TO_DEV - WR-channel for
the case of having eDMA accessed locally from CPU/Application side), but
providing an additional MEM_TO_MEM/DEV_TO_DEV-based semantics was quite
redundant if not to say potentially harmful (when it comes to removing the
denoted field). First of all since the dma_slave_config.direction field has
been marked as obsolete (see [1] and the struct dma_slave_config [2]) and
will be discarded in future, using it especially in a non-standard way is
discouraged. Secondly in accordance with the commit denoted above the
default dw_edma_device_transfer() semantics has been changed despite what
its message said. So claiming that the method was left backward compatible
was wrong.
Fix the problems denoted above and simplify the dw_edma_device_transfer()
method by dropping the parsing of the DMA-channel direction field. Instead
of having that implicit dma_slave_config.direction field semantic, use the
recently added DW_EDMA_CHIP_LOCAL flag to distinguish between the local and
remote DW eDMA setups thus preserving support for both cases. Add an ASCII
figure to clarify the situation.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/driver-api/dmaengine/provider.rst?id=v5.18#n478
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/dmaengine.h?id=v5.18#n389
[bhelgaas: convert references to specific URLs]
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220524152159.2370739-6-Frank.Li@nxp.com
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
The struct dw_edma contains wr(rd)_ch_cnt fields. The EDMA driver gets
write(read) channel number from register, then saves these into dw_edma.
The wr(rd)_ch_cnt in dw_edma_chip actually means how many link list memory
are available in ll_region_wr(rd)[EDMA_MAX_WR_CH]. Rename it to
ll_wr(rd)_cnt to indicate actual usage.
Link: https://lore.kernel.org/r/20220524152159.2370739-5-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
struct dw_edma_region rg_region included virtual address, physical address
and size information. But only the virtual address is used by EDMA driver.
Change it to void __iomem *reg_base to clean up code.
Link: https://lore.kernel.org/r/20220524152159.2370739-4-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that
is used by the eDMA core internally and should not be touched by the eDMA
controller drivers themselves. But currently, the eDMA controller drivers
like "dw-edma-pci" allocate and populate this internal structure before
passing it on to the eDMA core. The eDMA core further populates the
structure and uses it. This is wrong!
Hence, move all the "struct dw_edma" specifics from controller drivers to
the eDMA core.
Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
This patch adds the pid information which requested the lock operation
to the debug log output.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use the list helper list_first_entry() instead of using
list_entry() to get the first element of a list.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When system resumes from S3, the CPPC enable register will be
cleared and reset to 0.
So enable the CPPC interface by writing 1 to this register on
system resume and disable it during system suspend.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject and changelog edits ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a recent regression preventing some systems from powering off
after saving a hibernation image (Dmitry Osipenko).
-----BEGIN PGP SIGNATURE-----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=DjZY
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recent regression preventing some systems from powering off
after saving a hibernation image (Dmitry Osipenko)"
* tag 'pm-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Use kernel_can_power_off()
-----BEGIN PGP SIGNATURE-----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=beeQ
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A change to schedule the interrupt randomness mixing less often, yet
credit a little more each time, to reduce overhead during interrupt
storms.
- Squelch an undesired pr_warn() from __ratelimit(), which was causing
problems in the reporters' CI.
- A trivial comment fix.
* tag 'random-5.19-rc4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: update comment from copy_to_user() -> copy_to_iter()
random: quiet urandom warning ratelimit suppression message
random: schedule mix_interrupt_randomness() less often
Commit 85e123c27d ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.
If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.
Fix this regression by clearing bits up to BITS_PER_LONG boundary.
Fixes: 85e123c27d ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Introduce acpi_device_fix_up_power_extended() for fixing up power of
a device having an ACPI companion in a manner that takes the device's
children into account and make the MMC code use it in two places
instead of walking the list of the device ACPI companion's children
directly.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Commit 7dd76d1fee ("dm: improve bio splitting and associated IO
accounting") removed using cloned bio when dm io splitting is needed.
Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain()
causes multiple dm_io instances to share the same original bio, and it
works fine if IOs are completed successfully.
But a regression was caused for the case when BLK_STS_DM_REQUEUE is
returned from any one of DM's cloned bios (whose dm_io share the same
orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of
the original bio for the current exact dm_io needs to be re-submitted.
However, since the original bio is shared among all dm_io instances,
the ->orig_bio actually only represents the last dm_io instance, so
requeue can't work as expected. Also when more than one dm_io is
requeued, the same original bio is requeued from all dm_io's
completion handler, then race is caused.
Fix this issue by still allocating one clone bio for completing io
only, then io accounting can rely on ->orig_bio being unmodified. This
is needed because the dm_io's sector_offset and sectors members are
recorded relative to an unmodified ->orig_bio.
In the future, we can go back to using bio_trim()+bio_inc_remaining()
for dm's io splitting but then delay needing a bio clone only when
handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated
(so it needs a development cycle):
1) bio clone needs to be done in task context
2) a block interface for unwinding bio is required
Fixes: 7dd76d1fee ("dm: improve bio splitting and associated IO accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
test_sock_fields__detach() got called with a null pointer here when one
of the CHECKs or ASSERTs up to the test_sock_fields__open_and_load()
call resulted in a jump to the "done" label.
A skeletons *__detach() is not safe to call with a null pointer, though.
This led to a segfault.
Go the easy route and only call test_sock_fields__destroy() which is
null-pointer safe and includes detaching.
Came across this while looking[1] to introduce the usage of
bpf_tcp_helpers.h (included in progs/test_sock_fields.c) together with
vmlinux.h.
[1] https://lore.kernel.org/bpf/629bc069dd807d7ac646f836e9dca28bbc1108e2.camel@mailbox.tu-berlin.de/
Fixes: 8f50f16ff3 ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220621070116.307221-1-jthinz@mailbox.tu-berlin.de
The Arm v8.8 extension adds a new control FEAT_TIDCP1 that allows the
kernel to disable all implementation-defined system registers and
instructions in userspace. This can improve robustness against covert
channels between processes, for example in cases where the firmware or
hardware didn't disable that functionality by default.
The kernel does not currently support any implementation-defined
features, as there are no hwcaps for any such features, so disable all
imp-def features unconditionally. Any use of imp-def instructions will
result in a SIGILL being delivered to the process (same as for undefined
instructions).
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220622115424.683520-1-kristina.martsenko@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit b89ddf4cca43("arm64/bpf: Remove 128MB limit for BPF JIT programs")
removes the bpf jit region from the memory layout of the Aarch64
architecture. However, it forgets to update the documentation
accordingly.
- Remove the bpf jit region.
- Fix the Start and End addresses of the modules region.
- Fix the Start address of the vmalloc region.
Signed-off-by: Andre Mueller <am@emlix.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220621081651.61755-1-am@emlix.com
Signed-off-by: Will Deacon <will@kernel.org>
As "kcsan: Support detecting a subset of missing memory barriers"[1]
introduced KCSAN_STRICT/KCSAN_WEAK_MEMORY which make kcsan detects
more missing memory barrier, but arm64 don't have KCSAN instrumentation
for barriers, so the new selftest test_barrier() and test cases for
memory barrier instrumentation in kcsan_test module will fail, even
panic on selftest.
Let's prefix all barriers with __ on arm64, as asm-generic/barriers.h
defined the final instrumented version of these barriers, which will
fix the above issues.
Note, barrier instrumentation that can be disabled via __no_kcsan with
appropriate compiler-support (and not just with objtool help), see
commit bd3d5bd1a0 ("kcsan: Support WEAK_MEMORY with Clang where no
objtool support exists"), it adds disable_sanitizer_instrumentation to
__no_kcsan attribute which will remove all sanitizer instrumentation fully
(with Clang 14.0). Meanwhile, GCC does the same thing with no_sanitize.
[1] https://lore.kernel.org/linux-mm/20211130114433.2580590-1-elver@google.com/
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220523113126.171714-3-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
